PRODUCTGUIDESatJan3010:40:45GMT 05:302021
PRODUCTGUIDESatJan3010:40:45GMT 05:302021
PRODUCTGUIDESatJan3010:40:45GMT 05:302021
ARDEX Global
BAL ENDURA ADHESIVES (INDIA) PVT LTD was
re-branded as ARDEX ENDURA (INDIA) PVT LTD
after the joint venture between ARDEX Group,
Germany and Prism Johnson Limited, India.
Both the partners hold 50% each of the Share
Capital of the Company.
ARDEX ENDURA (INDIA) PVT LTD has Technical Know-How agreements with ARDEX Group
companies and the latest technology flows in from its Centers of Excellence. The Company's
products like 'Silver Star', 'Gold Star', 'Diamond Star', 'Platinum Star', 'White Star', etc., are
well known in the Indian Construction Sector.
With the guidance and full support from the ARDEX group, ARDEX ENDURA remains the
quality leader for the industry, offering excellent building chemicals with supreme processing
reliability. With 31 branches all over India and strategically positioned state-of-the-art
manufacturing plants, ARDEX ENDURA products are manufactured under a quality system
certified to ISO 9001, you can trust and rely on.
The comprehensive portfolio of products encompasses Tiling & Stone Care products, 3
Waterproofing systems, Industrial & Commercial flooring solutions, Concrete Repair and
Decorative finishes.
ARDEX ENDURA is committed to providing Continuing Professional Development (CPD)
Seminars that allow our customers to improve and broaden their knowledge and skills base
within construction industry. The ARDEXENDURAacademy has been created to ensure that
the knowledge gained through the seminars and hands-on trainings will have a positive
impact on an attendee's ability to implement best practice, leading to an increase in the
quality of work carried out on-site.
4
SYSTEMARDEX
Contents
WATERPROOFING SYSTEMS 23
FLOORING SOLUTIONS 39
DECORATIVE FINISHES 85
Surface Treatments 09
8
Contents
ACF 8 F 30
Ready to use crack filler paste for Cement based, non-shrink,
internal & external surface cracks in high strength powder crack filler for
plaster surface cracks in plaster
Description Description
ACF 8 is a single pack, composed of high F 30 is a specially formulated cement based
quality acrylic emulsion polymer, graded fillers polymer modified powder for filling cracks in
& additives. Ready to use paste for internal & plastered surface. F 30 when mixed with water
external surface cracks in plaster. It provides forms a creamy consistent paste which is
excellent bonding easy to use for filling cracks in plastered
surfaces.
Uses
Internal and external plastered brick masonry Uses
wall cracks of up to 5mm width. Repairing of internal and external cracks in
plastered surfaces up to 5mm X 5mm size. 9
Benefits
Ÿ Paste form, easy to apply Benefits
Ÿ Flexible, therefore does not crack & Ÿ Accommodates movements in the cracks
accommodates minor movements in Ÿ Water based stainer can be mixed with
cracks crack filler
Ÿ Water based: hence eco-friendly Ÿ Over coatable after curing.
Ÿ Over coated after 24 hours Ÿ Replaces costly sealants and putties SURFACE TREATMENTS
Ÿ Non-staining Ÿ No shrinkage
Ÿ Excellent adhesion with cementitious Ÿ Excellent Adhesion
surface Ÿ High strength
Ÿ UV resistance Ÿ No sagging
Description Description
FWO 5 is an oil based mould release agent C 20 is a spray or brush applied concrete
specially designed for the release of the curing compound based on liquid emulsion. It
moulds and shutters from concrete. It forms a is used on fresh poured concrete or
thin water repellent layer on the surface of the immediately on removing of shutters of cast
formwork and prevents the concrete from concrete. It forms a thin layer and seals the
adhering to moulds & shutters. The reactive concrete surface preventing moisture
components in FWO 5 protect the formwork evaporation and ensures full hydration.
and ensure stain free concrete.
Uses
Uses C 20 is an economical alternative in situations
Can be used on formwork and moulds made where availability of potable water and/or
of plywood, timber, steel. accessibility for efficient water curing is
10
difficult or unreliable. Suitable for use on all
Benefits concrete surfaces, such as: flyovers &
Ÿ Mineral oil based bridges, airports aprons, dams, chimneys etc.
Ÿ Can be spray applied Ideally suitable for curing localized concrete
Ÿ Reduces damage to concrete during de- repair areas.
shuttering
Ÿ Stain free concrete Benefits
SURFACE TREATMENTS
Description
SU 10 is a low modulus one-component,
moisture curing Class A polyurethane sealant.
It can accommodate cyclic joint movement of
50% (+/-25%) of the joint width.
Uses
Ÿ Sealing of small joints and fillets, windows
and door frames 11
Ÿ Flashing and common roofing detail
applications
Ÿ Sealing joints of facade panels and
curtain walls
Benefits
Ÿ No primer required SURFACE TREATMENTS
Ÿ Non staining & UV resistance
Ÿ Resistance to dilute acids and alkalis
Ÿ Excellent extrusion, tooling and storage
stability over wide range of climatic
condition
Ÿ Microorganism and fungus resistant
Ÿ Available in Black, Grey and White colours.
Coverage Estimates
Pack Size Coverage
600 ml sausages L = 600
(20 sausages per box) (W x D)
Uses Uses
Ÿ Waterproof coating for wet areas, Ÿ Economical concrete repairs
12 kitchens, balconies, terraces Ÿ Floor patch repair
Ÿ Bonding agent prior to applying renders, Ÿ Corrosion protection to steel
screeds/concrete toppings reinforcement
CONCRETE REPAIR & PROTECTION
Ÿ As patching mortar for re-profiling of Ÿ Admix to cement mortar for coving during
chipped edges waterproofing works
Ÿ As an admixture with cement paint for
improved water resistance and covering Benefits
capacity Ÿ Multipurpose usage: admix for screeds,
concrete repair and coving
Benefits Ÿ Improves water resistance when used
Ÿ Water resistant with cement mortar for fixing clay
Ÿ Improved flexibility and tensile strength. tiles/mosaic on roofs.
Ÿ Excellent bond with cementitious Ÿ High performance polymer additive for
substrates cement and concrete mixes
Ÿ Reduced water demand for equivalent Ÿ Bonding agent for old and new concrete
workability. Ÿ Water based: low odour & safe to use
Ÿ Excellent impermeability to water soluble
chemicals and salts Pack Size
Ÿ Resistance to penetration of chloride 1 litre, 5 litres and 20 litres
ions and carbon dioxide
Ÿ UV stable: can be left exposed
Pack Size
1 litre, 5 litres & 20 litres
EP 300 EP 305
Epoxy bonding agent Epoxy resin based adhesive and
repair compound
Description
EP 300 is a two component, polyamide epoxy Description
based bonding agent. It is specifically EP 305 is a two-part, thixotropic, high
designed for bonding new render or concrete performance epoxy adhesive and repair
to aged or old concrete substrates. It acts as a compound. It does not shrink on cure and ideal
high strength bonding bridge between old and for fixing expansion joint tapes, gap filling and
new concrete. concrete repair applications.
Uses Uses
Ÿ Bonding old and new concrete Ÿ As an adhesive for fixing expansion joint
Ÿ Bonding screeds and granolithic toppings tapes such as WPT 1000
to concrete floors Ÿ For filling of blow holes in concrete
Ÿ Bonding agent for concrete patch Ÿ As a crack filling and sealing compound
13
repairing for non-moving joints
Ÿ Fixing of surface ports for crack injection
Description Description
B 35 is a two component mortar consisting of B 40 has a blend of portland cement, graded
a blend of cement, graded fillers and chemical aggregates and additives to improve the flow
additives along with a liquid polymer to provide and physical properties. B 40 is non shrink
a mortar that ensures high strength and long- micro concrete that exhibits excellent flow, free
term durability. It is recommended for vertical from segregation and bleeding. It is
and horizontal structural repairs. recommended for large volume vertical or
horizontal structural repairs wherever the use
Uses of formwork is preferable to hand applied
Ÿ All types of structural repair that can be repair systems.
applied by trowel
Ÿ Repair of beams, columns, walls and Uses 15
slabs in high rise buildings Ÿ Large volume concrete repairs
Ÿ Repair of Marine structures Ÿ Repair of corrosion damaged concrete
Benefits Benefits
Ÿ High strength: suitable for structural Ÿ No primer required
repair Ÿ Very high and ultimate compressive
Ÿ Good bond to cementitious substrate strength
Ÿ Slump free: ideal for vertical (upto Ÿ Low permeability: provides very good
40mm) and horizontal (upto 100mm) protection against Carbon dioxide and
repairs chlorides
Ÿ Shrink free: reduces the risk of cracks Ÿ Self compacting: ensures complete void
Ÿ No curing required filling of the repair area
Ÿ Versatile: suitable for application thickness
Coverage Estimates of 20mm - 200mm
Pack size Coverage
20.20 kg Approx. 1 m² @ 10 mm Coverage Estimates
PART A 20kg thickness Pack size Coverage
PART B 200ml 25 kg Approx. 12.30 litres for 25
kg bag + 3.90 litres water
PU 100 PU 110
Two component, PU-injection grout Two component, polyurethane
for sealing of water-bearing voids injection resin
Description Description
PU 100 is a two-component, phthalate free, PU 110 is a phthalate and solvent-free, two
hydrophobic, polyurethane injection grout to be component MDI-based polyurethane injection
used as a temporary water-stop to seal flowing resin for crack injection. It is permanently
water (PU 110 to be used back-to-back for elastic and thus allows a permanent crack and
permanent seal). joint sealing even in case of movement of the
crack.
Uses
Ÿ Sealing of water ingress in water retaining Uses
structures as water tanks, swimming Ÿ One time injection into construction joints
pools and reservoirs of water retaining structures, basements,
16 Ÿ Sealing of water bearing cracks and voids underpass and tunnels
in basements and wet rooms Ÿ Used in combination with PU 100 for the
Ÿ Pre injection of cracks and joints in sub- permanent, elastic sealing of water
CONCRETE REPAIR & PROTECTION
Benefits Benefits
Ÿ Free expansion up to 30 times by volume Ÿ Phthalate free: environmental friendly
Ÿ Fast reacting semi rigid PU foam product
Ÿ Low viscosity: penetrates deep in fine Ÿ Form a flexible and impermeable seal
cracks where further limited movement of the
Ÿ Adjustable mixing ratio concrete is anticipated
Ÿ Excellent bond strength to cementitious Ÿ Low viscosity: allows penetration of fine
surfaces cracks
Ÿ Good chemical resistance to most weak Ÿ Fast and permanent elastic waterproofing
acids and alkali, ground water and sea for cracks and joints
water. Ÿ High resistance to the movement of the
Ÿ Phthalate free: environmental friendly structure
Uses Uses
Ÿ Repairing honeycombs by pressure Ÿ Foundation Bolts
18 Ÿ Reinforcement startup bars
grouting
Ÿ Duct grouting & bed grouting Ÿ Balustrades
Ÿ Filling gaps between precast elements Ÿ Dowel Bars
Ÿ Non-shrink cavity filling
Ÿ Filling up the plumbing & electric chases Benefits
Ÿ High strength
Benefits Ÿ Tough, shrink-free & strong anchoring
Ÿ Reduced water cement ratio: ensures low system
Ÿ Vibration resistant
ANCHORS & GROUTS
between base plate & concrete Ÿ Controlled expansion ensures rigid bond
foundation. between base plate & concrete
Ÿ Versatile: can be prepared to be of foundation.
flowable or pumpable consistency. Ÿ Versatile: can be prepared to be of
Ÿ Chloride free and non-corrosive flowable or pumpable consistency.
Ÿ High compressive strength Ÿ Chloride free & non-corrosive
Ÿ Suitable for grouting operations of gap Ÿ Very high ultimate compressive strength
width of 10mm - 100mm. Ÿ Grouting up to 120mm thickness
Yield Yield
Approx. 13 ltrs for 25kg bag + 4.5 ltrs water Approx. 12 ltrs for 25kg bag+3.25 ltrs water
B 50 B 51
Industrial, high strength, free flowing Industrial, high early strength, free
epoxy grout flowing, epoxy grout
Description Description
B 50 is a 3 component, high strength epoxy B 51 is a 3 component, high precision, high
grout specially designed to withstand static early strength industrial epoxy grout to
and dynamic loads. B 50 is a blend of epoxy withstand static and dynamic loads. B 51 is
resin, curing agent and inert aggregates. specifically designed for quick commissioning
of machines or maintenance shut down works.
Uses It has flowable consistency and can be used in
Ÿ Machine base plate grouting gap widths of 10 - 80mm.
Ÿ Industrial equipment subjected static and
dynamic loads Uses
Ÿ Grouting of equipment chemical spillage Ÿ Machine base plate grouting
occurs and cementitious grouts are not Ÿ Industrial equipment subjected static and
21
suitable dynamic loads
Ÿ High speed turbines Ÿ Grouting of equipment chemical spillage
Ÿ Grouting of machinery that require occurs and cementitious grouts are not
minimum downtime. suitable
Ÿ High speed turbines
Benefits Ÿ Grouting of machinery that require
Ÿ High tensile, flexural and compressive minimum downtime.
strengths
Benefits
ANCHORS & GROUTS
Ÿ Rapid strength gain
Ÿ Suitable for grouting operations of gap Ÿ High early strength gain
width of 10mm - 80mm Ÿ High tensile, flexural and compressive
Ÿ Resistance to dynamic load strengths
Ÿ Excellent adhesion steel and concrete Ÿ Resistance to dynamic load
Ÿ Withstands to a wide range of chemicals Ÿ High vibration resistance
Yield Yield
Approx. 13.60 ltrs for 26.5 kg pack Approx. 14 ltrs for 28 kg pack
ESTIMATION
Ÿ To estimate the quantity of grout required for a job, calculate the volume of the cavity to be filled in cubic feet.
Divide the calculated volume by the yield in cubic feet of one unit of grout to calculate how many units will be
needed. Add 5% to 10% for waste and spillage, more for smaller jobs, and less for larger ones.
Ÿ The most common shapes of cavities encountered in grouting operations are rectangular solids (for
example, the space under a rectangular base plate), solid cylinders (such as the space under a round, flat-
bottomed tank), and hollow cylinders (like the space between an anchor bolt and its hole).
Ÿ Many other cavity shapes can be divided into some combination of the common shapes for estimating
purposes.
1. Volume (in m3) of a rectangular solid = V = LWT
2. Volume (in m3) of a solid cylinder = V =0.785 D2 H
3. Volume (in m3) of a hollow cylinder = V =0.785 (D2- d2)H
Where,
W = width of the rectangular solid (m)
T = thickness of the rectangular solid (m)
L = length of the rectangular solid (m)
D = outside/ bigger diameter of the cylinder (m)
d = inside diameter of the cylinder (m)
H = height of the cylinder (m)
Membrane Waterproofing 32
Waterproofing Additives 36
Waterproofing Accessories 37
24
Contents
WPM 004 WPM 002
Acrylic modified flexible cementitious Two component undertile
waterproof coating waterproofing membrane
Description Description
WPM 004 is a two component, acrylic WPM 002 is a tough, fast drying two
modified cementitious waterproofing component waterproofing membrane
compound. It has been uniquely formulated specifically designed for use under tiles. The
with special polymer to increase its strength. product has been uniquely formulated with
WPM 004 is based on the most advanced synthetic microfibers to increase its strength
acrylic polymer technology and is totally and eliminate the need for a separate
resistant to re-emulsification. reinforcement mat.
Uses Uses
Ÿ Wet areas, kitchens & balconies Ÿ Internal Wet Areas & Drywalls
Ÿ Water tanks & retaining walls Ÿ Balconies and Decks 25
Ÿ As exposed waterproofing for non Ÿ Swimming Pools
accessible roofs Ÿ Other waterproofing areas that will be
Description Description
WPM 209 is a clear coating which acts as WPM 265 is acrylic primer system which
primer coat for WPM 309, AC 20 or for any creates a positive bond between the substrate
elastomeric acrylic coating. and most water based coatings. Designed
principally for internal use, WPM 265 can also
Uses be used for external applications.
Priming areas such as
Ÿ Exterior RCC surface Uses
Ÿ Plastered walls Ÿ Internal Wet Areas
Ÿ Masonry walls or facades Ÿ Balconies and Decks
Ÿ Stone walls Ÿ Swimming Pools
Ÿ Asbestos Ÿ Drywalls
Ÿ China mosaic tiles Ÿ Other waterproofing areas that will be
27
Ÿ Sloping roofs tiled or otherwise protected from regular
foot traffic
Coverage Estimate
Pack size Coverage
5 litres Approx. 30 m²
WPM 300 WPM 309
Water based epoxy membrane Elastomeric, external facade & roof
coating
Description
WPM 300 is a two component, high build, water Description
based epoxy polyamide membrane/barrier WPM 309 is a single component; tough, UV
coating with excellent resistant to hydrostatic resistant; acrylic based highly elastomeric
pressure and good bond to damp surfaces. waterproof coating for exterior walls and
roofs. The cured membrane has good crack-
Benefits bridging properties.
Ÿ Excellent adhesion to damp surfaces and
freshly laid green concrete. Uses
Ÿ Water resistant: prevents rising damp and Waterproofing & Protection of
efflorescence. Ÿ Exterior RCC surface
Ÿ The cured membrane will withstand Ÿ Masonry walls
hydrostatic pressure of 25m head of Ÿ Asbestos roofs
28
water (when applied directly to the Ÿ China mosaic tiles
substrate) and 40m head of water (when Ÿ Sloping roofs
LIQUID APPLIED WATERPROOFING
Coverage Estimates
Pack Size Coverage
20 litres Approx. 4.0 m²/ltr @
110 microns DFT in
2 coats
WPM 310 WPM 415 C
External facade and roof membrane Crystalline capillary waterproofing
Description Description
WPM 310 is a tough, UV stable flexible, WPM 415 C is a single component polymer
premixed liquid applied waterproofing modified cementitious waterproofing
membrane. It has been specifically formulated compound. The mixed slurry as excellent
as a general purpose membrane for exposed adhesion with concrete / sand cement screed.
wall. WPM 310 can be applied as an During application it seals the hairline cracks
aesthetically attractive textured or semi- caused by shrinkage or expansion.
smooth finish for walls. WPM 310 is available in
a range of standard colours. Uses
Basements, Retaining walls, Wet areas,
Uses Balcony, Roof terrace areas, sewage
Waterproofing & Protection of treatment and water treatment plants, water
Ÿ Exterior RCC surface tanks & concrete pipes and manholes etc.
Ÿ Masonry walls or facades
29
Ÿ Stone walls Benefits
Uses Uses
Ÿ Tanking and waterproofing structures Ÿ Waterproofing of podiums, suspended
30 below grade floors, planter boxes, terraces
Ÿ Remedial repairs to felts, concrete roof Ÿ Waterproofing of underground structures
surfaces Ÿ Waterproofing of car decks, bridges and
LIQUID APPLIED WATERPROOFING
Coverage Estimates
Pack Size Coverage
20 kg Approx. 18m² @ 1mm
WPM 158
High build, single component,
elastomeric polyurethane based
waterproofing membrane
Description
WPM 158 is single component, high build,
aliphatic polyurethane based elastomeric liquid
applied waterproofing membrane which finds
various usages in the construction industry.
Uses
Ÿ Suitable for external areas of
waterproofing, on walls and roof
subjected to ultra-violet radiation.
Ÿ Does not require protective screed.
31
Ÿ Can be applied on damp visibly dry
surfaces without the fear of blistering.
Benefits
Ÿ Excellent compatibility with almost every
construction material.
Ÿ Good resistance to wide range of
chemicals & oils.
Ÿ Resistant to abrasion and blushing
Ÿ Elastomeric
Ÿ Weather and UV resistant.
Ÿ Excellent flexibility
Coverage estimates
Pack Size Coverage
25 kg Approx. 2 kg/m² in 2 coats
for 1 mm DFT
ARDEX WPM 1000 WPM 1000 X
Weldable waterproofing membrane Waterproofing and decoupling
membrane
Description
ARDEX WPM 1000 Weldable Waterproofing Description
Membrane is a versatile rubber membrane Polyethylene waterproof and decoupling
that can be heat welded. It is suitable for membrane sandwitched between two layers
waterproofing underground tanking, rooftops, of polypropylene non-woven membranes
decks, undertile, canal and pond linings.
Uses
ARDEX WPM 1000 is made up of synthetic Internal walls and floors of
rubber with properties which resist ageing Ÿ Toilets
from heat, sunlight and ozone and is heat Ÿ Balconies
weldable. Polypropylene filaments are welded Ÿ Utility areas
onto both sides of the membrane for better Ÿ Swimming pools
wetting by water based adhesives. It has
32 excellent gas impermeability and toughness Benefits
and remains flexible at low temperatures. Ÿ Waterproof
MEMBRANE WATERPROOFING
Gauges
1.0mm & 1.5mm
Packaging
In rolls of nominal 1.4 m width and 20 m long.
Each roll is packed in polythene wrapper
trademarked ARDEX WPM 1000.
WPM 3000 X WPM 3000 BG
Self adhesive membrane Composite, blindside HDPE
membrane
Description
WPM 3000 X is a self-adhesive bituminous Description
waterproofing membrane self-protected with a WPM 3000 BG is a unique composite sheet,
cross-laminated HDPE film. It consists of a very comprising of a HDPE backing layer, a
adhesive bituminous compound that remains pressure sensitive adhesive membrane and
adhesive even at low temperatures. trafficable weather resistant protective
granular layer. The membrane firmly bonds to
Uses the poured concrete preventing ingress or
Ÿ Waterproofing of foundations and migration of water around the structure.
horizontal and vertical underground
structures. Benefits
Ÿ Waterproofing in atmospheres not Ÿ Can be applied to a variety of substrates
compatible with the use of free fire including compacted earth, concrete and 33
flames (i.e factories or warehouses were formwork.
flamable chemical agents are produced Ÿ Resistance to water migration
MEMBRANE WATERPROOFING
or stored). Ÿ Superior barrier: acts as a barrier
Ÿ Ideal for planter boxes, below ground against aggressive ground salts, toxic
applications and retaining walls contaminants and chemicals which may
attempt to enter the structure through
Benefits cracks in the concrete
Ÿ Quick Installation Ÿ Fully-adhering, watertight laps
Ÿ Cold application : installed without the use Ÿ Good crack protection
of open flames Ÿ Weather resistant
Ÿ Chemical resistance : highly resistant to Ÿ Flexible material that adapts to jobsite
acids, alkalis and other pollutants irregularities for ease of installation
Ÿ Self sealing : membrane self seals on
contact with substrate maintaining Pack Size
watertightness Length : 20 m
Width : 1.0 m
Pack Size Thickness : 1.2 mm
Roll size 1.5 m x 20 m
Roll weight Approx. 30 kg Accessories
WPM 3000 DSA - Double Sided Adhesive Tape
WPM 3000 BT - HDPE based Butt Joint Tape
WPM 3000 ST - HDPE Sanded Tape
BUTYNOL® BUTYNOL® 600
Roofing membrane Roof membrane with weld-tech
technology
Description
A synthetic rubber with properties which resist Description
ageing from heat, sunlight and ozone. It has Butynol® 600 is a flexible composite roofing
excellent gas impermeability and toughness membrane made with synthetic rubber having
and remains flexible at low temperatures. polypropylene mesh welded on to both sides.
It incorporates “weld-tech technology” making
Butynol® is manufactured by combining the it heat weldable using a hot air gun.
petroleum gases isobutylene and isoprene at
the extremely low temperature of - 100oC. It has excellent gas/moisture impermeability
(Rubber Technology - Morton) Butynol® is and toughness and remains flexible at low
marketed by ARDEX ENDURA as warranted temperatures. It is designed to resist ageing
roofing and tanking product and fixed by their from heat, sunlight and ozone.
trained and experienced approved applicators.
34
Benefits
BUTYNOL gauges & uses Ÿ Excellent durability
MEMBRANE WATERPROOFING
Standard 1.0mm - For roofs and gutters. Ÿ High chemical, UV and weathering
1.2mm - For roofs. resistance
1.5mm - For roofs and walk out decks. Ÿ No plasticizers or chlorinated ingredients
2.25mm - Heavy Duty Ÿ Avoid contact with oil and petroleum
Factory welded panels in all gauges can be based products, grease and hot bitumen
custom made.
Packaging
Pack Size Thickness 0.8 mm
Rolls size: 1.4 m width and 17.86 m long. Width 1.40 m
Length 20 m
Gauges available Weight Coverage
1.0mm black nominal 30kg 25 m²
1.5mm black nominal 45kg 25 m²
2.25mm black nominal 32kg 12 m²
1.2mm dove grey nominal 30kg 25 m²
1.5mm all colours nominal 47kg 25 m²
BUTYNOL® 750 WPT 1000
Rubber membrane waterproofing High performance waterproofing tape
system
Description
Description WPT 1000 is a waterproofing tape based on
Undertile Butynol® 750 is made up of thermo plastic elastomers (TPE) to provide a
synthetic rubber with properties which resist highly elastic and chemically resistant sealing
ageing from heat, sunlight and ozone and is of expansion joints, cracks, irregular and
heat weldable. Polypropylene filaments are unconventional joints. WPT 1000 is for
welded onto both sides of the membrane for installation with EP 305 epoxy adhesive on
better wetting by water based adhesives. It has various building substrates in critical areas
excellent gas impermeability and toughness with high and/or frequent movements.
and remains flexible at low temperatures.
Uses
Laps and corners are to be heat formed and/or Ideal for very large expansion joints and joints
welded. Tiling can be done directly on the with extreme movements for areas such as
Ÿ Basements
35
membrane after 60 minutes with common
ARDEX ENDURA tiling adhesives. Ÿ Podiums
MEMBRANE WATERPROOFING
Ÿ Tunnels and Culverts
Undertile Butynol® 750 is marketed by ARDEX Ÿ Reservoirs & Ponds
ENDURA as a warranted undertile Ÿ Roofs & Facades
waterproofing product using solvent free
adhesives and fixed by their trained and Benefits
experienced approved applicators Ÿ Highly flexible
Ÿ Good chemical resistance
Pack Size Ÿ Long lasting elasticity, even at high
Rolls size: 1.4 m width and 20 m long. temperatures
Ÿ Good resistance to hydrostatic pressure
Ÿ Available in various widths between
100mm to 1000mm
Roll Size
20m x 100mm x 1mm
20m x 200mm x 1mm
20m x 300mm x 1mm
Note: Other widths between 300 mm -
1000 mm are available upon request
E 160
Integral waterproofing liquid for
concrete and mortar
Description
E 160 is a specially formulated integral
cement waterproofing compound in liquid
form which contains selected plasticizers,
surface active agents and additives. It acts as
a water reducing admixture for cement
concrete and mortar.
Uses
Waterproofing admixture with concrete for:
Ÿ Sunken slab, podium slab.
Ÿ Water retaining structures.
36
Ÿ Swimming pools.
Ÿ Roof slabs and cement screeds / mortar
Ÿ Basements
WATERPROOFING ADDITIVES
Ÿ External plastering
Benefits
Ÿ Complies as per IS 2645-2003
Standards
Ÿ Improved workability
Ÿ Improved cohesiveness
Ÿ Good water reduction: improves
durability
Ÿ Reduced segregation and helps to
protect steel corrosion
Ÿ Minimizes shrinkage cracks
Ÿ Minimizes the permeability and increases
the waterproofing properties
Dosage
200 ml per 50 kgs of cement.
Pack Size
200 ml, 1 litre, 5 litres & 20 litres
WATERPROOFING ACCESSORIES
WA 98 WPM 401 C
Butynol adhesive Rapid Setting Cement Based Water
Stopping Mortar
Description
WA 98 is a high performance roofing contact Description
adhesive. It has been specially developed for WPM 401 C is a specially blended, extremely
bonding butyl rubber sheeting to roofing fast setting, hydraulic cement product
substrates. It’s convenient and economical designed to instantly stop leaking water or
spraying, combined with its long tack life; fluid seepage in concrete or masonry
make it ideal for bonding large areas. structures.
Benefits Benefits
Ÿ Spray grade - Formulated for optimum Ÿ Good bonding to cementitious substrate
performance for spraying. Ÿ Ideal for horizontal, vertical surfaces and
Ÿ Multi-purpose uses - Flooring, roofing, etc. against gravity
Ÿ Fine glue line - Enhanced finished product Ÿ No curing required
appearance Ÿ Can be applied at thickness of 3 - 40mm
WATERPROOFING ACCESSORIES
235 gsm Reinforcement for Liquid
Waterproofing
Description
Spunbond polyester nonwoven, needled one Description
side and thermofixed. WPM Deck Web is a polyester non-woven felt
reinforcement with glass filament for greater
Benefits durability. It is designed to be used as an
Ÿ Rot-proof embedding in liquid waterproof coatings for
Ÿ Resistant to mould, mildew, bacteria and crack bridging and also in situations where
rodents cracks in the substrate can be formed on a
Ÿ Easy to lay later stage. It ensures maintenance of even
Ÿ Extremely versatile thickness of coating at critical areas
Ÿ Resistant to UV rays
Benefits
Ÿ High resistant to tear
Ÿ High durability & flexibility
Ÿ Resistant to salts & chlorinates
Ÿ Available in white and green colours
Ÿ Available in varied gauges of 40 gsm,
50 gsm, 60 gsm and 70 gsm
WATERPROOFING ACCESSORIES
WPT 312 WPT 324
Waterproofing tape / flashing for Waterproofing tape / flashing for
construction joints construction joints
Description Description
Special coated non-woven: extension in cross Special coated non-woven: excellent extension
direction and rigid lengthwise, strong, thin, in cross direction and rigid lengthwise, strong,
high tenacity high tenacity
Uses Uses
Flashing for indoor expansion and other For covered outside application, flashing for
construction joints construction joints and other joints
38
WPM SW series
WATERPROOFING ACCESSORIES
Swellable waterbar
Description
WPM SW is a swellable waterbar based on
polymer technology and designed for use in
construction joints. WPM SW slowly swells in
volume when in contact with water and
efficiently waterproofs the construction joint.
Uses
Ÿ Construction joints in basements,
swimming pools, water reservoirs,
effluent treatment plants etc.
Ÿ Pipe penetrations & cut-outs
Primers 41
40
Contents
P 51 P 82
Concentrated water-based primer Water dispersed epoxy primer
and bonding agent
Description
Description P 82 is a two-part water based epoxy primer
P 51 is a concentrated, synthetic, water- and bonding agent for interior areas which is
based, solvent- free multi-purpose primer with non-flammable and non-corrosive. P 82 forms a
a wide range of applications which, after priming/bonding layer on most substrates,
drying, helps to inhibit the penetration of water particularly smooth and dense surfaces. P 82
from subsequently applied materials. can be used as a primer and bonding agent
prior to the application of the ARDEX ENDURA
Benefits range of cement based products.
Ÿ Multipurpose: suitable for a wide range of
applications Uses
Ÿ As primer for use with cement based Ÿ Used as a primer and bonding agent for
flooring systems use with cement based flooring systems 41
Ÿ Seals the substrate porosity Ÿ Used on power floated concrete, pre-cast
Ÿ Good adhesion to the porous surface concrete, terrazzo, glazed ceramic and
Ÿ Low viscosity: penetrates into the quarry tiles.
concrete substrate for a better bond Ÿ Used to prime hard flooring grade
Ÿ Low odour and solvent free asphalt, rigid metal, hard and sound paint
thickness coatings, as well as traces of
Pack Size sound adhesive residues on dense
5 kg impervious surfaces.
Ÿ Used for priming wood and wood-based
Coverage panels prior to apply cement based
Mixing Ratio Approx. coverage per products.
P 51: water 5kg unit of P 51
1:1 33 m² Benefits
1:2 60 m² Ÿ Good adhesion to dense, impervious
1:3 100 m² surfaces
Ÿ Non-flammable
PRIMERS
Ÿ Non-corrosive
Coverage Estimates
Pack size Coverage
6 kg approx. 30 to 60 m²
Part A 3 kg
Part B 3 kg
R 2 CE R3E
Solvent free epoxy primer Solvent free epoxy primer
Description Description
R 2 CE is a solvent free two component epoxy R 3 E is a solvent free, two component epoxy
based primer. It is designed to penetrate primer for use with ARDEX ENDURA
deeper into the pores in order to achieve a polyurethane and epoxy floor systems. It can
better mechanical bond of subsequent epoxy also be used as a primer for cementitious floor
coating, epoxy screed and self level epoxy systems by blinding with fine aggregates.
toppings.
Benefits
Uses Ÿ Multipurpose: can be used with cement,
Ÿ As a primer for use with epoxy based epoxy and polyurethane based flooring
systems. systems
Ÿ Allows for the subsequent coating to Ÿ Seals the substrate porosity
achieve a higher dry film thickness and Ÿ Solvent free
42
uniformity. Ÿ Low viscosity: penetrates into the
Ÿ Provides for a better chemical bond of concrete substrate for a better bond
the thicker epoxy system which results in Ÿ Supplied in pre-measured packs for ease
a longer lasting and more durable of mixing and consistency at site
flooring
Coverage Estimates
Benefits Pack size Coverage
Ÿ Provides better adhesion because it 5 kg Approx. 20 - 24 m²/coat
penetrates into the concrete substrate Part A 3.125 kg
for a better bond. Part B 1.875 kg
Ÿ Suitable for internal use.
Ÿ Longer pot life
Coverage Estimates
Pack Size Coverage
5 kg Approx. 5m2/kg/coat
PRIMERS
Part A 3.3 kg
Part B 1.7 kg
10 kg
Part A 6.6 kg
Part B 3.4 kg
R 8 CP R 140 CP
Polyurethane tack coat Three-component, polyurethane
primer
Description
R 8 CP is a two component ‘tack' coat Description
specifically formulated for use with R 10 CP R 140 CP is a three-component, solvent free
Coving and Wall Render. R 8 CP provides polyurethane primer. It is designed to seal the
excellent adhesion and is suitable for use on porosity of the substrate before installing
concrete, brick and blockwork etc. Where polyurethane based systems.
surfaces are very porous, the first coat of R 8
CP must be left to cure before applying the Benefits
subsequent layer. Vertical surfaces must be of Ÿ Seal the substrate porosity
a rigid construction to resist deflection during Ÿ Allow the subsequent coating to achieve a
the application process. correct dry film thickness
Ÿ Low viscosity: penetrates into the
Benefits concrete substrate for a better bond
Ÿ Low VOC
43
Ÿ Supplied in pre-measured packs for ease
Ÿ Easy application by roller or brush of mixing and consistency at site
Description Description
A 3 is a screed concentrate made up of high A 37 is a blend of cement, fillers, high quality
quality additives and superior polymer to additives and superior polymer to produce a
produce rapid usable screed for receiving rapid usable screed for receiving floor
floor coverings such as tiles/stones/ coverings such as tiles/stones/cementitious
cementitious self levelling compounds/resin self levelling compounds/resin coating/stextile
coatings/textile floor coverings/parquet floor coverings/parquet flooring.
flooring.
Uses
Uses Ÿ Airport Terminals
Ÿ Airport Terminals Ÿ Public spaces
Ÿ Public spaces Ÿ Shopping Malls
Ÿ Shopping Malls Ÿ Universities
44 Ÿ Universities Ÿ Suitable as an underlay screed for wet on
Ÿ Suitable as an underlay screed for wet wet application of tiles & natural stones
on wet application of tiles & natural using S 15 C
CEMENTITIOUS SCREEDS & LEVELLERS
stones using S 15 C
Benefits
Benefits Ÿ Early drying compared to traditional
Ÿ Early drying compared to traditional cement sand screed
cement sand screed Ÿ After 7 days dry, it is ready to receive
Ÿ After 7 days dry, it is ready to receive natural stones, textile floor coverings,
natural stones, textile floor coverings, parquet flooring and resin coatings.
parquet flooring and resin coatings. Ÿ Walkable after 8 hours
Ÿ Walkable after 8 hours Ÿ No water curing (protection with PE-foil
Ÿ No water curing sheet recommended)
Ÿ It is suitable as binder for screeds Ÿ It is suitable as binder for screeds
according to DIN 18560 and EN 13813 according to DIN 18560 and EN 13813
Coverage Coverage
1:5 mixing ratio 6.90 m² @ 20 mm 1:5 mixing ratio 4.00 m² @ 20 mm
1:6 mixing ratio 7.70 m² @ 20 mm 1:6 mixing ratio 4.50 m² @ 20 mm
1:8 mixing ratio 9.60 m² @ 20 mm 1:8 mixing ratio 5.50 m² @ 20 mm
Description Description
A 45 is a blend of cement, fillers, and special A 46 is a rapid setting and hardening, slump
additives to produce a rapid drying slump-free free mortar which is ideal for external or
mortar used for internal repairs. The mixed internal repairs. The mortar sets and hardens
mortar sets after 15 minutes and can be rapidly to give a repair of exceptional strength
trafficked after 90 minutes. and hardness. The mixed mortar sets after 20
minutes and can be trafficked after only 2 - 3
Uses hours.
Ÿ Repairing and refacing concrete stair
treads/risers, concrete floors, cement Uses
and sand screeds Ÿ Repairing and refacing external concrete
Ÿ Filling and patching cracks in walls, stair treads and risers, brickwork (not 45
ceilings and soffits. lightweight concrete), renders and
Ÿ Making good around pipework, door and concrete floors.
window frames. Ÿ Filling and patching cracks in walls and
Description Description
CL 11 has been especially designed to K 15 is an advanced sub-floor smoothing
produce a smooth, flat surface when applied compound. It is virtually tension free and is
to hard, rigid sub-floors such as sand/cement designed to rapidly level and smooth hard sub-
screeds, concrete, etc. CL 11 contains high floors prior to applying a floor finish.
quality special cements and selected fillers so
that, when mixed with water, it produces a free Uses
flowing mortar with self-levelling properties. Ÿ Internal sub-floors of concrete, cement
The mortar can be applied at a thickness from sand, quarry tiles, etc., prior to the
3 - 5mm and suitable for internal areas only. installation of floor coverings.
Ÿ Used in conjunction with either P 82 or
46 Uses P 51 primers, K 15 can be applied to old
Levelling and smoothing uneven internal sub- sub-floors, e.g. floor screeds and other
floors such as concrete, cement sand screed, hard and rigid bases.
quarry tiles, etc. prior to the installation of
CEMENTITIOUS SCREEDS & LEVELLERS
Description Description
K 80 is a specially formulated cement-based K 301 is a fast setting cement-based product
compound for resurfacing and levelling designed to smooth, level, rough and damaged
existing concrete floors to give a hard, concrete surface in external and internal
smooth, flat, wearing surface or as a base for situations. It is a grey powder consisting of
suitable paint and resin coatings. special cements, graded aggregates and high
quality synthetic resins. When mixed with water,
Benefits a fluid mortar is produced which sets within 2
Ÿ COST EFFECTIVE: topping system hours and can normally walked on after
available approximately 2 - 3 hours.
Ÿ STRONG: withstands heavy wheeled
traffic and has excellent abrasion Uses 47
resistance Ÿ Balconies and patios.
Ÿ DURABLE: produces wearing surfaces in Ÿ Domestic driveways, garages, walkways
commercial and industrial areas Ÿ Concrete surface exposed to normal foot
Coverage Estimates
Pack size Coverage
25 kg Approx. 3 m² @ 5 mm
FEATHER FINISH FH 20
Rapid drying patching and smoothing Non metallic floor hardener
compound
Description
Description FH 20 is a pre-mix blended powder containing
FEATHER FINISH is a blend of cement, fillers, hydraulic binders and special wear resistance
and special additives to produce a rapid drying mineral aggregates. It is used as a dry shake
patching and smoothing compound designed over fresh, wet concrete to provide a dense,
for very thin smoothing applications (typically non-porous surface which is extremely
1 mm thick or less, but may be used up to 3 hardwearing and abrasion resistant.
mm thick in one application). The RAPIDRY
formula enables floor coverings to be installed Uses
after as little as 15 minutes. FH 20 is ideally suited for floors subjected to
heavy traffic and not exposed to serious
Uses chemical attack such as:
Ÿ Patching, filling, day work joints, ridges, Ÿ Loading bays
48
gouges, depressions, uneven trowel Ÿ Mechanical workshops
marks, etc., in the sub-floor. Ÿ Storage rooms
Ÿ Smoothing joints between staggered Ÿ Garages
CEMENTITIOUS SCREEDS & LEVELLERS
Coverage Estimates
Pack size Coverage
16 kg Approx. 4.9 m² @ 2 mm
Part A 3.80 kg
Part B 1.70 kg
Part C 10 kg
Part D 500 g
R 33 CE R 34 CE
Epoxy coving render Non-toxic epoxy coating for floors &
walls
Description
R 33 CE is a three component, high Description
performance, trowel applied epoxy mortar R 34 CE is a two component, non-toxic epoxy
designed for use as coving in areas where coating available in both pigmented and non-
cleanliness and hygiene is of prime pigmented versions. It provides a tough, hard
importance. It has outstanding wearing wearing protective surface resistant to
properties with high chemical resistance. corrosion, chemical attack and bacterial
Ideally suited for aggressive areas where a growth on floor, wall and ceiling. R 34 CE is
seamless, joint free finish is required. solvent free and can be used safely in small
rooms and potable water tanks.
Uses
Ÿ Laboratories & clean rooms Uses
Ÿ Food and beverage production Ÿ Concrete or mild steel water tanks
51
Ÿ Abattoirs Ÿ Production and processing areas
Ÿ Dairies Ÿ Dairies
Ÿ Pharmaceutical manufacturing
Benefits Uses 53
Ÿ High performance, epoxy floor screed Ÿ Levelling of concrete surfaces in new
system works or repairs
Coverage estimates
Pack size Coverage
26.25 kg Approx. 6.25 m²/pack @
2mm thickness
R 625 CE
High performance, antistatic,
conductive self-smoothening, epoxy
flooring system
Description
R 625 CE is seamless, self-smoothing, solvent
free, conductive epoxy flooring system with
excellent conductive properties. The cured
conductive epoxy flooring exhibits an
attractive joint free finish with chemical
resistance and decorative properties.
Uses
Ÿ Electronic & Telecommunication Industry
54 Ÿ Automotive Industry
Ÿ Pharmaceutical manufacturing
Ÿ Aerospace
EPOXY COATINGS & SELF LEVELLERS
Ÿ Operation Theatres
Ÿ Computer rooms, etc.
Benefits
Ÿ Electrostatically Conductive
Ÿ Excellent Chemical, Mechanical and
Abrasion Resistance
Ÿ Seamless: easily cleaned to maintain high
standards of hygiene
Ÿ Hard wearing and durable
Ÿ Microelectronic industry grade
conductivity 104 - 106 Ω
Coverage Estimates
Pack size Coverage
R 625 CE Primer Approx. 9m²/coat
2.250 kg
Coverage Estimates
Pack size Coverage
14.30 kg Approx. 1.7 m² when
Part A 900 g applied at a thickness
Part B 1 kg of 5mm
Part C 12 kg
Part D 400 g
R 15 CP R 50 CP
Low viscosity repair system and Two-component modified urethane
renovation coating for application to coating
polyurethane floors
Description
Description R 50 CP is a two-component modified
R 15 CP is a solvent free, low viscosity repair urethane coating for use as an independent
material which may also be used as a coating coating or as a part of a multi-coat system with
for application to polyurethane floors and also ARDEX ENDURA range of resin floorings. It has
as renovation coating over polyurethane good crack bridging properties and provides
floors. R 15 CP can be extensively used for excellent resistance to abrasion and chemical
applications where a thin coating is required to attack.
reduce texture or improve appearance and
cleaning. Uses
Ÿ Car park decks & ramps
R 15 CP is also suitable for application as a Ÿ Engineering Works
56
line marking paint on previously applied Ÿ Service centers, garages
polyurethane floors such as R 70 CP or R 90 Ÿ Warehouses
POLYURETHANE FLOORING SYSTEM
Description Description
R 70 CP is a polyurethane resin flooring system R 90 CP is a heavy duty polyurethane screed
having outstanding wearing properties with which includes hard wearing aggregates for
high chemical resistance and pleasing outstanding impact and abrasion resistance. It
decorative finish. Ideally suited in aggressive provides a dense, chemical resistant,
areas where a seamless, joint free finish is seamless, joint free floor finish. Suitable for use
required and maximum cleanliness is essential. from 4mm up to 9mm thickness.
Suitable for use from 2mm up to 5mm
thickness. Uses
Ÿ Food processing and storage
Uses Ÿ Abattoirs and drinks production
Ÿ Food and beverage production Ÿ Dairies, cheese and milk production
Ÿ Pharmaceutical manufacturing Ÿ Pharmaceutical manufacturing
Ÿ Warehouse and storage
57
Ÿ Warehouse and storage
Ÿ Semi wet processing zones Ÿ Cold rooms, chillers and freezers
Description Description
R 69 CP is a two component, pigmented, A specialist applied, 1mm thick self-smoothing
aliphatic polyurethane coating. It has good UV epoxy polyurethane resin floor finish
resistance and suitable for use in both internal combining outstanding wearing properties
and external applications. R 69 CP can be with chemical resistance and decorative
used as an independent coating or as a top properties. Ideally suited in areas where a
coat with ARDEX ENDURA range of resin seamless, joint free finish is required and
flooring systems. maximum cleanliness is essential.
Uses Uses
Ÿ Car park decks & ramps Ÿ Laboratories
Ÿ Engineering Workshops Ÿ Clean rooms
58
Ÿ Service centers, garages Ÿ General light industry
Ÿ Warehouses
POLYURETHANE FLOORING SYSTEM
Description Description
CPS 10 E is a tough, durable, epoxy based car CPS 20 ID is a tough, durable, polyurethane car
pack protection system providing a seamless, pack protection system providing a seamless,
wear resistant, profiled surface to wear resistant, profiled surface to intermediate
intermediate decks of multi-story car parks. decks of multi-story car parks. CPS 20 ID is
The high gloss helps to brighten the car park available in various colours, providing
and provides aesthetical finish by demarcation aesthetics and demarcation of different areas.
of different areas.
Uses
Uses Ÿ Internal Car Park decks & ramps
Ÿ Internal Car Park decks & ramps Ÿ Service centers, garages
Ÿ Service centers, garages Ÿ Warehouses
60
Ÿ Warehouses Ÿ Loading Bays
Ÿ Loading Bays
Benefits
Benefits Ÿ Seamless
Ÿ Seamless: easily cleanable to maintain Ÿ Anti skid
high standards of hygiene Ÿ Hard wearing: extremely durable and
Ÿ Tough & Hard wearing: durable with low abrasion resistant with low maintenance
maintenance cost cost
Ÿ Resistant to a wide range of chemicals Ÿ Resistant to a general and vehicle related
and liquids chemicals spillages
CAR PARK SYSTEM
Coverage estimates
Pack Size Coverage
20 kg 0.6 - 1.0 kg/m²
(depending on location
Top Coat of use)
Wear coat
Anti slip
aggregates Concrete
Base coat Substrate
Primer
AF 131 AF 471
Adhesive for vinyl floor covering Parquet floor adhesive
sheet and tiles
Description
Description AF 471 is a high solids acrylic-urethane
AF 131 is water-based, low odour, solvent free, adhesive used for almost all types of interior
polymer emulsion-based single component wood flooring that are recommended for glue -
floor covering adhesive containing a blend of down installations. AF 471 is extremely
high quality dispersions, mineral fillers and moisture resistant and has excellent ultimate
water. AF 131 has a long tack time, with very bond strength while maintaining the elongation
good early and long term adhesive strength. characteristics necessary to allow for some
wood movement.
Uses
Ÿ As an adhesive for all types of vinyl (PVC Uses
and vinyl tiles or cushioned type flooring) As an adhesive for fixing Solid wood, Parquet,
62 and most carpets Engineered wood plank, Cork sheet
Ÿ Can be applied on chip board, hard underlayment
board, plywood etc
VINYL & PARQUET ADHESIVES
Pack Size
21 kg
Tile & Stone Installations
Tile & Stone Installations
64
Description Description
Grey, polymer modified adhesive suitable for Polymer modified grey cement-based
fixing ceramic tiles on walls & floors in interior adhesive, suitable for fixing ceramic tiles for
situations. Suitable for fixing tiles upto 6 mm floors & walls in interior situations. Suitable for
bed thickness (can be extended up to 12 mm fixing ceramic tiles upto 6 mm bed thickness
thickness in area of limited extent). (can be extended up to 12 mm thickness in
Note: Not recommended for direct use onto area of limited extent). The set adhesive is
gypsum plaster (wall finishes), paint or metal. water-resistant and is suitable for use in
showers and bathrooms.
Benefits Note: Not recommended for direct use onto
Ÿ Polymer modified adhesive gypsum plaster (wall finishes), paint or metal.
Ÿ Easy mixing & application
Ÿ Internal situations Benefits 65
Ÿ For concrete/plaster surface Ÿ Good bond strength
Ÿ Suitable for fixing ceramic tiles on walls Ÿ Water resistant
& floors Ÿ Easy mixing & application
Ÿ Complies to the requirement of IS 15477:
Coverage Estimates 2004 Type1
Description Description
High polymer modified, grey cement based tile High polymer modified, white cement based tile
adhesive suitable for fixing wall and floor adhesive suitable for fixing wall and floor tile &
tile/stone in interior and exterior situations natural stone in interior and exterior situations
upto 6mm bed thickness (can be extended up upto 6mm bed thickness (can be extended up
to 12 mm in area of limited extent). The set to 12 mm in area of limited extent). The set
adhesive is water-resistant and is suitable for adhesive is water-resistant and is suitable for
use in showers and wet areas. By addition of use in showers and totally immersed situations
ADMIX AD1, GOLD STAR is suitable for use in such as swimming pools.
totally submerged conditions such as
swimming pools. WHITE STAR is used for wall and floor tiles,
66 mosaics, vitrified and fully vitrified tiles, marble,
GOLD STAR is used for wall and floor tiles, terrazzo and natural stone.
mosaics, vitrified and fully vitrified tiles, Note: Not recommended for direct use onto
terrazzo and natural stone. gypsum plaster (wall finishes), paint or metal.
Note: Not recommended for direct use onto
gypsum plaster (wall finishes), paint or metal. Benefits
TILE & STONE ADHESIVES
Description Description
Grey cement based, high polymer modified, White cement based, high polymer modified,
high strength adhesive for fixing tile & stone high strength adhesive for fixing tile & stone on
on wall/floor in interior/exterior situations wall/floor in interior/exterior situations at upto
upto 6mm bed thickness (can be extended up 6mm bed thickness (can be extended up to 12
to 12 mm in area of limited extent). The set mm in area of limited extent). The set adhesive
adhesive is water-resistant and non-slip. is water-resistant and non-slip.
DIAMOND STAR Grey is flexible and can DIAMOND STAR White is flexible and can
accommodate shocks due to impact load and accommodate shocks due to impact load and
heavy traffic. It is used for fixing ceramic, heavy traffic. It is used for fixing ceramic,
vitrified & fully vitrified tiles, glass mosaic, vitrified & fully vitrified tiles, glass mosaic, 67
porcelain, terrazzo, natural stone and porcelain, terrazzo, natural stone and
engineered stone. engineered stone.
Note: Not recommended for direct use onto Note: Not recommended for direct use onto
gypsum plaster (wall finishes), paint or metal. gypsum plaster (wall finishes), paint or metal.
Description Description
White cement based, water & frost resistant, Two-part adhesive comprising of rubber-based
high polymer modified, high strength adhesive powder and water based polymer liquid.
for fixing tile and stone on wall/floor in Flexible adhesive for use in areas where tiling is
interior/exterior situations upto 6mm bed likely to be subjected to some limited
thickness (can be extended up to 12 mm in background movement or vibration, especially
area of limited extent). The set adhesive is wood, plywood & metal surface. Available in
water-resistant and suitable for use in grey and white.
swimming pools.
Benefits
PLATINUM STAR White is used for fixing Ÿ High performance flexible adhesive
ceramic, vitrified & fully vitrified tiles, glass Ÿ Suitable for wood & metal surface
68
mosaic, porcelain, terrazzo, metal or glass Ÿ High tensile strength
tiles, non staining natural stone and Ÿ Water and frost resistant
engineered stone. Ÿ Suitable for use in interior and exterior
locations
Benefits Ÿ Suitable for submerged conditions
TILE & STONE ADHESIVES
Description Description
High polymer modified, off-white coloured High polymer modified, off-white coloured
adhesive formulated with enhanced properties adhesive specifically formulated to have
of slip resistance, flexibility and extended open enhanced properties of slip resistance and
time necessary for fixing large format tiles and deformability necessary for fixing tile and stone
stones on wall/floor in interior/exterior on substrates that are subjected to
situations. deformation and/or vibrations.
Standards Standards
Conforms to EN 12004 : 2017 and is a Conforms to EN 12004 : 2017 and is a
deformable (S1) improved (2) slip resistant highly deformable (S2) improved (2) slip
(T) cementitious adhesive (C) with extended resistant (T) cementitious adhesive (C) with 69
open time (E) of class C2TES1. extended open time (E) of class C2TES2.
Uses Uses
Fixing large format tiles/stones on ׃ Fixing tiles & stones on ׃
Ÿ Cement & lime renders Ÿ Deformable substrates or substrates
Description Description
S 15 C is a polymer modified, high strength, M 15 is a grey, polymer modified adhesive
grey cement based adhesive used in slurry suitable for brick/block work in interior and
consistency for fixing vitrified tiles, ceramic exterior situations. The adhesive is water
tiles and stable natural stones. It is not suitable resistant.
for fixing moisture sensitive stones and for
vertical applications. Benefits
Ÿ Polymer modified adhesive
Areas of Application Ÿ Easy mixing & application
Ÿ Interior & Exterior floors Ÿ Internal and external situation
Ÿ Domestic and Commercial floors Ÿ Good adhesion between AAC blocks
Ÿ No curing required
70
Background/Bases
Ÿ Fresh Sand/Cement Screed Pack size
Ÿ Fresh screed modified with ‘screed 26 kg
concentrate’ (refer A 3 TDS for details)
Coverage
TILE & STONE ADHESIVES
Coverage Estimates
Pack size Coverage
26 kg Approx. 3.0 kg/m2 @
2mm thickness
WA 91
Three part epoxy adhesive and grout
Description
WA 91 is a high performance epoxy adhesive
and grout that exhibits superior bond strength
and chemical resistance. It is designed for
fixing and grouting tiles and stones on metal or
fiber glass surfaces. Also suitable for
installation of natural stones and agglomerates
that have a tendency to stain or warp when
installed with water based adhesives.
Benefits
Ÿ Non slump
Ÿ Resistant to chemicals and a variety of
71
acids
Ÿ Water impermeable
Ÿ High mechanical strength and good
adhesion
Ÿ Can be used in submerged conditions
Suitable Substrates
Ÿ Fibre Reinforced Plastic (FRP) & Glass
Reinforced Plastic (GRP)
Ÿ Medium density fibre-cement sheet,
Plasterboard
Ÿ Glass, Metal, MS and Aluminum surfaces.
Ÿ Existing ceramic and stone tiles
Ÿ Concrete, Renders, Screeds
Coverage Estimates
Pack size Coverage
4.2 kg Approx. 1.73 m2
@ 1.5 mm bed thickness
CEMENT POLYMER GROUT SUPER GROUT
Polymer modified grout for wall and High polymer modified, water and
floor tile/stone joints stain resistant grout
Description Description
A high quality polymer-modified, water SUPER GROUT is a high quality, high polymer -
resistant, cement based grout designed for modified, high performance grout with
grouting glazed wall tiles, porcelain tiles, excellent water - repellent and efflorescence
mosaic, vitrified & fully vitrified tiles, natural resistance properties designed for grouting
and engineered stones. glazed tiles, mosaic, vitrified and fully vitrified
tiles, ceramic tiles, industrial tiles, granites,
Benefits marbles & other natural stones etc. SUPER
Ÿ Good bond strength GROUT has higher strength, water and stain
Ÿ Water resistant resistance compared to normal cement grout.
Ÿ For interior & exterior use
72 Ÿ Suitable for joint width of 1 - 6 mm Benefits
Ÿ Available in range of colours Ÿ High bond strength
Ÿ Conforms to overall Migration Test Ÿ Excellent water repellent property
specifications as per USFDA - 175.300, Ÿ Non-shrink
certified by CFTRI Ÿ Better efflorescence and stain resistance
Ÿ Suitable for joint width of 1 - 6 mm
Coverage Estimates Ÿ For interior & exterior use
Pack size Coverage Ÿ Available in range of colours
500 g, 1 kg & Consumption depend on
10 kg joint width, size of tiles Coverage Estimates
TILE JOINT GROUTS
Coverage Estimates
Pack size Coverage
1 kg & 5 kg Consumption depend on
joint width, size of tiles
Description Description
WA D is an epoxy grout specially designed to WA G has luminous powder from rare earth,
enhance the aesthetics of the tile joint with a which can absorb ultraviolet, lamp light,
‘sparkling’ effect. It is available in Gold, Bronze sunlight and other visible lights in only 15
& Silver colours. minutes, then giving out light up to 2 hours.
‘Glow in the dark’ feature is characterized by
WA D is a four component grout with high their ability to absorb/ store the energy of
degree of resistance to chemical attack, natural/artificial lights and to emit it in the form
abrasion and impact. The cured grout is of visible light in the dark. Available in Blue
hygienic, impervious and does not permit the Green and Green.
entry of bacteria or dirt.
74 Uses
Uses Grouting of tiles/stones in areas where ‘glow
Grouting of tiles/stones in areas where in the dark’ effect is desired, such as
‘sparkling’ effect is desired, such as Ÿ Restaurants & Hotels
Ÿ Restaurants & Hotels Ÿ Showrooms
Ÿ Showrooms Ÿ Multiplexes
Ÿ Shopping malls & Multiplexes Ÿ Bathrooms
Ÿ Bathrooms
Features
Benefits Ÿ Glows in dark
TILE JOINT GROUTS
Ÿ Provides ‘sparkling’ effect to tile joints Ÿ High strength and durable joints
Ÿ High strength and durable joints Ÿ Hygienic and chemical resistant
Ÿ Hygienic and chemical resistant Ÿ Stain and bacterial resistant
Ÿ Stain and bacterial resistant Ÿ Suitable for joint width of 2 - 20 mm
Ÿ Suitable for joint width of 2 - 20 mm Ÿ Sterile
Description
F R is two component cement based on Furane
Resin, graded fillers, special additives with a
catalyst. The hardened cement exhibits
resistance to all non oxidizing acids dilute
oxidizing acids and has a temperature
resistance up to 165°C.
Benefits
Ÿ High temperature resistance up to 165°C
Ÿ Suitable for acid proof tile fixing and
grouting on concrete substrate
Ÿ High strength
Ÿ Suitable for acid proof substrates
TILE JOINT GROUTS
Ÿ Ease to apply
Ÿ Resistant to a wide range of chemical and
liquids
Coverage Estimates
Pack Size Coverage
4 kg Approx. 1m² /kit
Part A 1 kg @ 3mm thickness using
Part B 3 kg notched trowel
TILE ADHESIVE & GROUT ADDITIVES
ADMIX AD 1 ADMIX GT 1
Liquid polymer additive for use with Liquid polymer additive for use with
cement based adhesives cement polymer grout, super grout
and wide joint grout
Description
ADMIX AD1 is a white, polymer emulsion for Description
use with cement mortar or cement based White, synthetic polymer emulsion for use with
adhesives to improve the flexibility, water cement-based grouts. Suitable for use in
resistance and bond strength. interior and exterior locations in both dry and
wet service conditions.
ADMIX AD1 is specifically recommended for
use with GOLD STAR/WHITE STAR while tiling Uses & Benefits
in swimming pools and water retaining Ÿ Improves mechanical strength
structures. Ÿ Provides greater adhesion to tile edges
Ÿ Provides greater abrasion resistance.
Pack Size Ÿ Increases flexural strength and flexibility.
1 litre & 5 litres Ÿ Reduces water permeability
Ÿ Minimises the risk of efflorescence.
Dosage
1 litre for every 20 kg bag of cement based Pack Size
adhesives 100ml & 1 litre
76
ArdiFlex ADMIX
Latex additive for use with ArdiFlex S1
Description
ArdiFlex ADMIX is a liquid additive for use with
ArdiFlex S1 to obtain a high performance,
TILE ADHESIVE ADDITIVE
Benefits
Ÿ Improves flexibility & water resistance
Ÿ Increases adhesion & bond strength
Ÿ Suitable for wet areas & swimming pools
Ÿ Suitable for interior & exterior situations
Pack Size
5 litres
Dosage
A 50 kg bag of ArdiFlex S1 will require
approx. 2.5 litres of ArdiFlex ADMIX
HEAVY DUTY IMPREGNATING TILE & IMPREGNATING TILE &
STONE SEALER STONE SEALER
Description
UNDER TILE & STONE PRIMER is a water
based primer designed as a barrier to prevent
water, alkali and other compounds from
reaching the surface and to avoid
efflorescence that can cause surface
discolouration especially in cement
substrates, stones and porous tiles.
Uses
UNDER TILE & STONE PRIMER can be used for
78 natural stones and tiles in interior & exterior
situations such as:
Ÿ Walls
Ÿ Floors
Ÿ Kitchens
Ÿ Bathrooms
Benefits
Ÿ Can be primed on concrete surface
before painting or laying of tiles to
prevent efflorescence and to provide
water resistance surface
Ÿ Allows moisture vapour transmission
Ÿ Water based primer
Ÿ Prevent surface discolouration
Ÿ Uniform, strong cohesive film
Ÿ Efficient barrier against migrating alkali &
SEALERS
minerals
Coverage Estimates
Pack size Coverage
500 ml & 5 litres Approx. 10 -15m²/litre/
coat depending on
porosity of the surface
FC - SS FC - SC
High performance sealer High performance sealer colour
enhancer
Description
A premium solvented hybrid system with Description
fluorochemical technology, based sealer which A premium solvented hybrid system with
bonds with tile/stone for improved wear fluorochemical technology, based sealer
resistance. Penetrates into nano pores and which bonds with tile/stone for improved wear
effective on vitrified and nano tiles. resistance. Penetrates into Nano pores,
Effective on vitrified and Nano Tiles.
Benefits
Ÿ Natural look Benefits
Ÿ Flurochemical technology Ÿ Enhances and highlights the colour of
Ÿ Hydrophobic/oleophobic stone/Tile
Ÿ User friendly Ÿ Flurochemical technology
Ÿ Non-yellowing Ÿ Hydrophobic/oleo phobic
79
Ÿ Improves the wear resistance of tiles & Ÿ User friendly
stones Ÿ Non-yellowing
Ÿ Allows the tiles & stones to breath Ÿ Improves the wear resistance of tiles &
Ÿ Penetrates into Nano pores stones
Ÿ Effective on vitrified and Nano Tiles Ÿ Allows the tiles & stones to breath
Ÿ Protects tiles & stone against UV rays Ÿ Penetrates into Nano pores
Ÿ Protects tiles and stones against Ÿ Effective on vitrified and Nano Tiles
efflorescence, rust stains Ÿ Protects tiles & stone against UV rays
Ÿ Protection against toughest oils & water Ÿ Protects tiles and stones against
based stains efflorescence, rust stains
Ÿ Durable long lasting "seal” Ÿ Protection against toughest oils & water
based stains
Coverage Estimates Ÿ Durable long lasting "seal”
Pack Size Coverage
1 litre & 5 litres Approx. 10 - 15m²/litre/ Coverage Estimates
coat depending on the Pack Size Coverage
SEALERS
Pack Size
500 ml & 5 litres
CLEANERS
NON ACIDIC CLEANER TILE & STONE CLEANER
Non acidic wall & floor tile cleaners Highly effective cleaner for everyday
maintenance
Description
Fast acting, non-acidic, concentrated, wall and Description
floor tile/stone cleaner. The special A highly effective cleaner designed for
formulation removes dirt, grease and stains everyday maintenance of tiles, marbles &
from tiled surfaces. When dry, the surface is natural stones etc. Suitable as a general
left hygienically clean. purpose cleaner. It is very much safe and less
reactive (compared to other cleaners based on
Uses Hydrochloric acid) especially on marble
NON ACIDIC CLEANER can be used in interior surfaces. Designed specially for removal of
situations such as: lime scale & for everyday maintenance of tiles,
Ÿ Operation theatres marbles, natural stones, etc. Ideal for regular
Ÿ Walls maintenance of heavily trafficked areas such
Ÿ Floors as shopping malls, hotels etc.
Ÿ Kitchens
81
Ÿ Bathrooms Uses
Ÿ Countertops TILE & STONE CLEANER can be used in
interior & exterior situations such as:
Benefits Ÿ Walls
Ÿ Non-acidic Ÿ Floors
Ÿ Fast acting Ÿ Kitchens
Ÿ Anti-bacterial Ÿ Bathrooms
Ÿ Provides hygienically clean surroundings Ÿ Countertops
Ÿ Shield against MICROBE Ÿ Heavy trafficked areas
Ÿ Easy to use
Benefits
Pack Size Ÿ Daily maintenance
500 ml Ÿ General purpose cleaner
Ÿ Effective against lime scales
CLEANERS
Pack Size
500 ml & 5 litres
RTC 100
Resin tool cleaner
Description
An excellent cleaner based on powerful and
unique formula of solvents specially designed
for fast and effective removal of Epoxy and
Polyurethanes.
Benefits
Ÿ Easy to clean any difficult epoxy and
82
polyurethane stains on the floors, walls,
tools and tackles
Ÿ Fast and effective
Ÿ Easy to use
Ÿ Solvent based
Ÿ Powerful formula
Packaging
5 kg and 30 kg container
CLEANERS
TOOLS AND TACKLES
Thin-Bed Thick-Bed
Metal Notch Trowels Metal Notch Trowels
Spacers
Grout Rake 2, 3, 4, 5, 8 & 10 mm
83
All PANDOMO® systems raise the bar in speed and cost efficiency, not
to mention timeless elegance for walls and floors.
DECORATIVE FINISHES
panDOMO K1 panDOMO K2
Design, levelling compound, white Design thinlayer compound for floor
areas, internal white
Benefits
Ÿ Creates PANDOMO® Floor and FloorPlus Benefits
Surfaces with ARDURAPID® effect Ÿ Produce PANDOMO® Loft floors with
Ÿ Fast drying ARDURAPID® - effect
Ÿ Layer thicknesses of from 5 to 10 mm Ÿ Fast drying
Ÿ Self-levelling Ÿ For Finish-/Scratch coats
Ÿ Crack-free even in thick layers Ÿ High surface strength
Ÿ Can be pumped Ÿ Fast walkable
Ÿ Fast load-bearing
87
DECORATIVE FINISHES
NOTES
NOTES
NOTES