Tle 7 2ndq Exam

Republic of the Philippines
Department of Education
Region III- Central Luzon
Schools Division of Bulacan
Emilia Perez Ligon High School
(formerly Maligaya High School)
Maligaya, San Miguel, Bulacan
nd
2 Summative Test in TLE
S.Y. 2020-2021
Name:
Year & Section: Score:
Module 1
MULTIPLE CHOICE: Direction: Read carefully the statement. Choose or Select the best answer each item.
Write the letter only on your paper.
1. Tools used for weeding and cutting undesirable weeds.

a. bolo b. shovel c. plow d. crowbar
2. Tools used for digging big holes and for digging out big stones and stumps.
a. crowbar b. plow. c. shovel d. bolo
3. Tools used for digging canals, breaking hard topsoil and for digging up stones and tree stumps.
a. pick-mattock b. grab-hoe c. spade d. shovel
4.Tools used for breaking hard topsoil and pulverizing soil.
a. pick-mattock b. grab-hoe c. spade d. shovel
5. used for removing trash or soil, digging canals or ditches and mixing soil media.
a. rake b. spade c. pick- mattock d. shovel
6. It is used in removing trash, digging loose soil, moving soil from one place to another and for mixing soil media. a. shovel
b. rake c. spading pork d. hand trowel
7. It is used for cleaning the ground and levelling the topsoil.
a. rake b. spade c. pick- mattock d. shovel
8. It is used for watering seedlings and young plants.
a. knife b. axe c. pruning shears d. sprinklers
9. They used for hauling water, manure and fertilizers.
a. water pails c. sprayers
b. wheel barrow d. sickle
10. It is used for cultivating the garden plot by loosening the soil and removing young weeds around the plant.
a. hand trowel c. hand pork
b. hand cultivator d. light hoe
11. Tools used for loosening the soil around the growing plants and putting small amount of manure in the soil.
12. Tools used for loosening and leveling soil and digging out furrows for planting.
13. It is used for cutting branches of planting materials and unnecessary branches of plants.
a. pruning shears c. hand pork
b. knife d. thresher
14. What is powered tool machine used in farming?
a. repair c. equipment
b. hand tools d. maintenance
15. The process to restore to the good condition something broken or damaged.
a. repair c. preventive
b. farm implements d. hand tools
Module 2
Directions: Read and analyze each statement below. Write TRUE if the statement is correct and FALSE if the statement is incorrect.
1. Implements are accessories which are pulled by working animals or mounted machineries and which are usually
used in the preparation of land.
2. Disc plows are pulled by working animals and made of either a combination of metal and wood or pure metal.
3. Plow farm implement pulled by either a working animal or a tractor.
4. Rotavator is an implement mounted to a tractor used for tilling and pulverizing the soil
5. Farm Equipment are machineries used in crop production especially in vegetable production.
6. Four-wheel tractor is used to pull a plow and harrow in preparing a large area of land.
7. Hand tractor is used to pull disc plow and disc harrow in preparing much bigger area of land.
8. Threshing machine or a thresher is a piece of farm equipment that threshes grain, that is, it removes the seeds
from the stalks and husks.
9. Grass cutter is a machine or device for cutting grass (as a lawn mower or a scythe)
10. Water pumps are used to draw irrigation water from a source.
11. Never stand near a spinning PTO (P0wer take off)
12. Rest arms or hands in the joints of any hydraulic part! Or risk dismemberment.
13. Turn on tractor if any jamming or other obstructions occur when using PTO driven implements.
14. Never put your hands inside or around active implements when the tractor is running
15. Do not operate tractor on a dangerous slope! Be aware of rollover dangers.
Module 3 at the back>>>>>>>

Module 3
Direction: Identify the words being described by each of the following sentences. Choose your answer from the given choices in the
box. Write the letter on the space provided.
A. Shop building D. Maintenance G. Chemical J. Nursery shed M. Storage barn
B. Health E. Green house H. Occupational Safety K. Facility N. Exposure
C. Psychosocial environment F. Risk I. Biological L. Manual Handling O. Safety
Q. Hazard R. Physical S. Mechanical
_____1. a more sophisticated building in which seedlings is being started before bringing to the nursery shed. In most green houses,
environmental conditions are controlled.
_____ 2. is a light structure where seedlings are cared for before planting. The shed also provides shade to growers while raising
seedling.
_____3. a building where hand tools are being stored and repaired.
_____4. a building where agricultural chemicals are being stored.
_____5. is the practices related to production and work process. This aims to good health of each worker.
_____6. is the physical or environmental conditions of work which comply with the prescribed Occupational Health Safety (OHS)
Standards and which allow the workers to perform his or her job without or within acceptable exposure to hazards.
_____7. is the potential for harm, or adverse effect on an employee’s health. Anything which may cause injury or ill health to anyone
at or near a workplace is a hazard.
_____8. occurs when a person comes in contact with a hazard.
_____9. is the likelihood that a hazard will cause injury or ill health to anyone at or near a workplace. The level of risk increases with
the severity of the hazard and the duration and frequency of exposure.
_____10. includes floors, stairs, work platforms, steps, ladders, fire, falling objects, slippery surfaces, manual handling (lifting, pushing,
pulling), excessively loud and prolonged noise, vibration, heat and cold, radiation, poor lighting, ventilation, and air quality).
_____11. includes chemical substances such as acids or poisons and those that could lead to fire or explosion, like pesticides,
herbicides, cleaning agents, dusts and fumes from various processes such as welding.
_____12. includes bacteria, viruses, mold, mildew, insects, vermin, animals.
_____13. includes electricity, machinery, equipment, pressure vessels, dangerous goods, fork lifts, cranes, hoists.
_____14. includes workplace stressors arising from a variety of sources.
_____15. is something designed or created to provide a service or fulfil a need.
Student Signature Parent/Guardian Signature
Prepared by:
Renz Eliseo M. Hernandez

TLE-Subject Teacher

Tle 7 2ndq Exam

Uploaded by

Copyright:

Available Formats

Tle 7 2ndq Exam

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tle 7 2ndq Exam

Uploaded by

Copyright:

Available Formats

Republic of the Philippines

1. Tools used for weeding and cutting undesirable weeds.

Module 3 at the back>>>>>>>

A. Shop building D. Maintenance G. Chemical J. Nursery shed M. Storage barn

B. Health E. Green house H. Occupational Safety K. Facility N. Exposure

C. Psychosocial environment F. Risk I. Biological L. Manual Handling O. Safety

Q. Hazard R. Physical S. Mechanical

_____4. a building where agricultural chemicals are being stored.

_____8. occurs when a person comes in contact with a hazard.

_____12. includes bacteria, viruses, mold, mildew, insects, vermin, animals.

_____14. includes workplace stressors arising from a variety of sources.

_____15. is something designed or created to provide a service or fulfil a need.

Student Signature Parent/Guardian Signature

Renz Eliseo M. Hernandez

You might also like