Scribd
Upload
1K views4 pages

Mobile App - "Ledart" Operating Instructions: 1. Software Download

The document provides operating instructions for the LedArt mobile app for controlling LED displays. It explains how to download the app, connect the control card to modify the Wi-Fi password, set screen parameters, and edit and send programs to the display. Specifically, it describes scanning a QR code to install the app, connecting to the control card over Wi-Fi and changing the default password for security, and allows setting the screen resolution, frequency, and polarity in the settings menu. It also outlines how to add text, images, or clocks to programs and send them to the connected display.

Uploaded by

TLTPS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views4 pages

Mobile App - "Ledart" Operating Instructions: 1. Software Download

The document provides operating instructions for the LedArt mobile app for controlling LED displays. It explains how to download the app, connect the control card to modify the Wi-Fi password, set screen parameters, and edit and send programs to the display. Specifically, it describes scanning a QR code to install the app, connecting to the control card over Wi-Fi and changing the default password for security, and allows setting the screen resolution, frequency, and polarity in the settings menu. It also outlines how to add text, images, or clocks to programs and send them to the connected display.

Uploaded by

TLTPS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Mobile APP – “LedArt” Operating Instructions

1. Software download

Scanning the QR code downloaded and installed.

2. Connect the control card and modify the Wi-Fi password

1). Connect the control card: Open the LedArt application, click the “Find
device” button on the lower right corner, select the Wi-Fi signal connect to the
control card (the Wi-Fi default password is 88888888).After the connection is
successful, the software interface displays the name of the control card.
2). Change password: The initial password is very simple. For the safety of
parameters and programs, According to the software prompt, change the
password (8~16-digit combination of letters and numbers) and re-enter the
new password and connect.

change Password Enter the password to reconnect

3. Screen Parameters Setting

Click the settings icon in the upper right corner, Select [Screen Parameter
Settings] and enter the access password (password: 888) to enter the setting
interface, after setting the resolution of the display. The default is the normal
P10 parameter (P4.75 selects C2, the chip is 16188B). The single module
selects C46, and it is necessary to adjust the scanning frequency, clock
frequency, polarity setting and other parameters when the display is
abnormal.

4. Edit and Send Programs


1. Editing program: Click the “+” icon on the right side of the main interface to
add the program content, which is optional for text, picture and clock.In the
program editing interface, you can set the style of the text as well as
display special effects, clock styles and simple pictures.
Note: one display can only add up to two program areas.

2. Sending programs: After edited, click the “Send” button in the lower right
corner of the software to update the programs.

You might also like