Spec CPU2017 Integer Rate Result: Hewlett Packard Enterprise

SPEC CPU2017 Integer Rate Result
spec 
Copyright 2017-2018 Standard Performance Evaluation Corporation
Hewlett Packard Enterprise SPECrate2017_int_base = 109

(Test Sponsor: HPE)
Synergy 480 Gen10 SPECrate2017_int_peak = Not Run
(2.10 GHz, Intel Xeon Silver 4116)
CPU2017 License: 3 Test Date: Oct-2017
Test Sponsor: HPE Hardware Availability: Oct-2017
Tested by: HPE Software Availability: Sep-2017
Copies 0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 80.0 90.0 100 110 120 130 140 150 160 170 180 190 205
83.9
500.perlbench_r 48
97.4
502.gcc_r 48
134
505.mcf_r 48
71.9
520.omnetpp_r 48
108
523.xalancbmk_r 48
204
525.x264_r 48
95.8
531.deepsjeng_r 48
85.3
541.leela_r 48
201
548.exchange2_r 48
81.0
557.xz_r 48
SPECrate2017_int_base (109)
Hardware Software
CPU Name: Intel Xeon Silver 4116 OS: SUSE Linux Enterprise Server 12 (x86_64) SP2
Max MHz.: 3000 Kernel 4.4.21-69-default
Nominal: 2100 Compiler: C/C++: Version 18.0.0.128 of Intel C/C++
Enabled: 24 cores, 2 chips, 2 threads/core Compiler for Linux;
Orderable: 1, 2 chip(s) Fortran: Version 18.0.0.128 of Intel Fortran
Cache L1: 32 KB I + 32 KB D on chip per core Compiler for Linux
L2: 1 MB I+D on chip per core Parallel: No
L3: 16.5 MB I+D on chip per chip Firmware: HPE BIOS Version I42 released Oct-2017 (tested with I42 9/27/2017)
Other: None File System: xfs
Memory: 384 GB (24 x 16 GB 2Rx8 PC4-2666V-R, System State: Run level 3 (multi-user)
running at 2400) Base Pointers: 64-bit
Storage: 1 x 480 GB SATA SSD, RAID 0 Peak Pointers: Not Applicable
Other: None Other: jemalloc: jemalloc memory allocator library
V5.0.1;
jemalloc: configured and built at default for
32bit (i686) and 64bit (x86_64) targets;
jemalloc: built with the RedHat Enterprise 7.4,
and the system compiler gcc 4.8.5;
jemalloc: sources available from jemalloc.net or
releases
Page 1 Standard Performance Evaluation Corporation ([email protected]) https://www.spec.org/

SPEC CPU2017 Integer Rate Result
spec 

(Test Sponsor: HPE)
Results Table
Base Peak
Benchmark Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio
500.perlbench_r 48 910 83.9 911 83.9 910 83.9
502.gcc_r 48 695 97.9 699 97.3 698 97.4
505.mcf_r 48 578 134 574 135 587 132
520.omnetpp_r 48 875 71.9 873 72.1 876 71.9
523.xalancbmk_r 48 467 108 468 108 465 109
525.x264_r 48 412 204 414 203 413 204
531.deepsjeng_r 48 574 95.8 574 95.8 575 95.6
541.leela_r 48 932 85.3 932 85.3 932 85.3
548.exchange2_r 48 625 201 623 202 625 201
557.xz_r 48 640 81.0 640 81.0 682 76.0
SPECrate2017_int_base = 109
SPECrate2017_int_peak = Not Run
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
Submit Notes
The numactl mechanism was used to bind copies to processors. The config file option 'submit'
was used to generate numactl commands to bind each copy to a specific processor.
For details, please see the config file.
Operating System Notes

Stack size set to unlimited using "ulimit -s unlimited"
Prior to runcpu invocation
Filesystem page cache synced and cleared with:
sync; echo 3> /proc/sys/vm/drop_caches
runcpu command invoked through numactl i.e.:
numactl --interleave=all runcpu <etc>
irqbalance disabled with "service irqbalance stop"
tuned profile set wtih "tuned-adm profile throughput-performance"
VM Dirty ratio was set to 40 using "echo 40 > /proc/sys/vm/dirty_ratio"
Numa balancing was disabled using "echo 0 > /proc/sys/kernel/numa_balancing"
General Notes
Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH = "/home/cpu2017/lib/ia32:/home/cpu2017/lib/intel64:/home/cpu2017/je5.0.1-32:/home/cpu2017/je5.0.1-64"
Binaries compiled on a system with 1x Intel Core i7-4790 CPU + 32GB RAM
memory using Redhat Enterprise Linux 7.4

spec 

(Test Sponsor: HPE)
Platform Notes
BIOS Configuration:
Thermal Configuration set to Maximum Cooling
LLC Prefetch set to Enabled
LLC Dead Line Allocation set to Disabled
Memory Patrol Scrubbing set to Disabled
Workload Profile set to General Throughput Compute
Minimum Processor Idle Power Core C-State set to C1E
Sysinfo program /home/cpu2017/bin/sysinfo
Rev: r5797 of 2017-06-14 96c45e4568ad54c135fd618bcc091c0f
running on sy480_hjp_suse_machine1 Thu Oct 26 12:18:37 2017
SUT (System Under Test) info as seen by some common utilities.

For more information on this section, see
https://www.spec.org/cpu2017/Docs/config.html#sysinfo
From /proc/cpuinfo
model name : Intel(R) Xeon(R) Silver 4116 CPU @ 2.10GHz
2 "physical id"s (chips)
48 "processors"
cores, siblings (Caution: counting these is hw and system dependent. The following
excerpts from /proc/cpuinfo might not be reliable. Use with caution.)
cpu cores : 12
siblings : 24
physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13
physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13
From lscpu:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 48
On-line CPU(s) list: 0-47
Thread(s) per core: 2
Core(s) per socket: 12
Socket(s): 2
NUMA node(s): 4
Vendor ID: GenuineIntel
CPU family: 6
Model: 85
Model name: Intel(R) Xeon(R) Silver 4116 CPU @ 2.10GHz
Stepping: 4
CPU MHz: 2095.086
BogoMIPS: 4190.17
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 1024K
(Continued on next page)

spec 

(Test Sponsor: HPE)
Platform Notes (Continued)

L3 cache: 16896K
NUMA node0 CPU(s): 0-5,24-29
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp
lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg
fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes
xsave avx f16c rdrand lahf_lm abm 3dnowprefetch ida arat epb pln pts dtherm intel_pt
tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2
erms invpcid rtm cqm mpx avx512f avx512dq rdseed adx smap clflushopt clwb avx512cd
avx512bw avx512vl xsaveopt xsavec xgetbv1 cqm_llc cqm_occup_llc
/proc/cpuinfo cache data

cache size : 16896 KB
From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a
physical chip.
available: 4 nodes (0-3)
node 0 cpus: 0 1 2 3 4 5 24 25 26 27 28 29
node 0 size: 96349 MB
node 0 free: 95893 MB
node 1 cpus: 6 7 8 9 10 11 30 31 32 33 34 35
node 2 cpus: 12 13 14 15 16 17 36 37 38 39 40 41
node 3 cpus: 18 19 20 21 22 23 42 43 44 45 46 47
node distances:
node 0 1 2 3
0: 10 21 31 31
1: 21 10 31 31
2: 31 31 10 21
3: 31 31 21 10
From /proc/meminfo
MemTotal: 395926636 kB
HugePages_Total: 0
Hugepagesize: 2048 kB
From /etc/*release* /etc/*version*

SuSE-release:

spec 

(Test Sponsor: HPE)
Platform Notes (Continued)

SUSE Linux Enterprise Server 12 (x86_64)
VERSION = 12
PATCHLEVEL = 2
# This file is deprecated and will be removed in a future service pack or release.
# Please check /etc/os-release for details about this release.
os-release:
NAME="SLES"
VERSION="12-SP2"
VERSION_ID="12.2"
PRETTY_NAME="SUSE Linux Enterprise Server 12 SP2"
ID="sles"
ANSI_COLOR="0;32"
CPE_NAME="cpe:/o:suse:sles:12:sp2"
uname -a:
Linux sy480_hjp_suse_machine1 4.4.21-69-default #1 SMP Tue Oct 25 10:58:20 UTC 2016
(9464f67) x86_64 x86_64 x86_64 GNU/Linux
run-level 3 Oct 26 12:16
SPEC is set to: /home/cpu2017

Filesystem Type Size Used Avail Use% Mounted on
/dev/sda4 xfs 405G 11G 394G 3% /home
Additional information from dmidecode follows. WARNING: Use caution when you interpret
this section. The 'dmidecode' program reads system data which is "intended to allow
hardware to be accurately determined", but the intent may not be met, as there are
frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
BIOS HPE I42 09/27/2017
Memory:
24x UNKNOWN NOT AVAILABLE 16 GB 2 rank 2666, configured at 2400
(End of data from sysinfo program)
Compiler Version Notes

==============================================================================
CC 500.perlbench_r(base) 502.gcc_r(base) 505.mcf_r(base) 525.x264_r(base)
557.xz_r(base)
------------------------------------------------------------------------------
icc (ICC) 18.0.0 20170811
Copyright (C) 1985-2017 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------
==============================================================================
CXXC 520.omnetpp_r(base) 523.xalancbmk_r(base) 531.deepsjeng_r(base)

spec 

(Test Sponsor: HPE)
Compiler Version Notes (Continued)

541.leela_r(base)
------------------------------------------------------------------------------
icpc (ICC) 18.0.0 20170811
------------------------------------------------------------------------------
==============================================================================
FC 548.exchange2_r(base)
------------------------------------------------------------------------------
ifort (IFORT) 18.0.0 20170811
------------------------------------------------------------------------------
Base Compiler Invocation

C benchmarks:
icc
C++ benchmarks:
icpc
Fortran benchmarks:
ifort
Base Portability Flags

500.perlbench_r: -DSPEC_LP64 -DSPEC_LINUX_X64
502.gcc_r: -DSPEC_LP64
505.mcf_r: -DSPEC_LP64
520.omnetpp_r: -DSPEC_LP64
523.xalancbmk_r: -DSPEC_LP64 -DSPEC_LINUX
525.x264_r: -DSPEC_LP64
531.deepsjeng_r: -DSPEC_LP64
541.leela_r: -DSPEC_LP64
548.exchange2_r: -DSPEC_LP64
557.xz_r: -DSPEC_LP64
Base Optimization Flags

C benchmarks:
-Wl,-z,muldefs -xCORE-AVX2 -ipo -O3 -no-prec-div

spec 

(Test Sponsor: HPE)
Base Optimization Flags (Continued)

C benchmarks (continued):
-qopt-mem-layout-trans=3 -L/usr/local/je5.0.1-64/lib -ljemalloc
C++ benchmarks:
-qopt-mem-layout-trans=3 -L/usr/local/je5.0.1-64/lib -ljemalloc
Fortran benchmarks:
-qopt-mem-layout-trans=3 -nostandard-realloc-lhs -align array32byte
-L/usr/local/je5.0.1-64/lib -ljemalloc
Base Other Flags

C benchmarks:
-m64 -std=c11
C++ benchmarks:
-m64
Fortran benchmarks:
-m64
The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/Intel-ic18.0-official-linux64.2017-10-19.html
http://www.spec.org/cpu2017/flags/HPE-Platform-Flags-Intel-V1.2-SKX-revG.html
You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/Intel-ic18.0-official-linux64.2017-10-19.xml
http://www.spec.org/cpu2017/flags/HPE-Platform-Flags-Intel-V1.2-SKX-revG.xml
SPEC is a registered trademark of the Standard Performance Evaluation Corporation. All other brand and product names appearing in
this result are trademarks or registered trademarks of their respective holders.
For questions about this result, please contact the tester. For other inquiries, please contact [email protected].
Tested with SPEC CPU2017 v1.0.2 on 2017-10-26 02:48:37-0400.

Report generated on 2018-10-31 14:56:46 by CPU2017 PDF formatter v6067.
Originally published on 2017-12-12.

Spec CPU2017 Integer Rate Result: Hewlett Packard Enterprise

Uploaded by

Copyright:

Available Formats

Spec CPU2017 Integer Rate Result: Hewlett Packard Enterprise

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Spec CPU2017 Integer Rate Result: Hewlett Packard Enterprise

Uploaded by

Copyright:

Available Formats

SPEC CPU2017 Integer Rate Result

Hewlett Packard Enterprise SPECrate2017_int_base = 109

Page 1 Standard Performance Evaluation Corporation ([email protected]) https://www.spec.org/

Hewlett Packard Enterprise SPECrate2017_int_base = 109

Operating System Notes

Page 2 Standard Performance Evaluation Corporation ([email protected]) https://www.spec.org/

Hewlett Packard Enterprise SPECrate2017_int_base = 109

SUT (System Under Test) info as seen by some common utilities.

(Continued on next page)

Hewlett Packard Enterprise SPECrate2017_int_base = 109

Platform Notes (Continued)

/proc/cpuinfo cache data

From /etc/*release* /etc/*version*

(Continued on next page)

Hewlett Packard Enterprise SPECrate2017_int_base = 109

Platform Notes (Continued)

run-level 3 Oct 26 12:16

SPEC is set to: /home/cpu2017

(End of data from sysinfo program)

Compiler Version Notes

(Continued on next page)

Hewlett Packard Enterprise SPECrate2017_int_base = 109

Compiler Version Notes (Continued)

Base Compiler Invocation

Base Portability Flags

Base Optimization Flags

(Continued on next page)

Hewlett Packard Enterprise SPECrate2017_int_base = 109

Base Optimization Flags (Continued)

Base Other Flags

Tested with SPEC CPU2017 v1.0.2 on 2017-10-26 02:48:37-0400.

You might also like

From /etc/release /etc/version