0% found this document useful (0 votes)
156 views1 page

Quiz 3

Three continuously stirred tank reactors (CSTRs) operate under the same conditions with a reaction rate constant k of 0.02 min-1 and liquid volume of 500 L. Stream F1 enters CSTR-1 at 20 L/min with an A concentration of 0.5 mol/L. Stream F2 enters at 100 L/min with a B concentration of 1 mol/L. The reaction is pseudo-first order in A. 20% of the flow exiting CSTR-3 is recycled back to CSTR-1. The document asks to solve the material balances for components B, C, and D exiting the reactors using LU Decomposition.

Uploaded by

Ahmed Alwaqedi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
156 views1 page

Quiz 3

Three continuously stirred tank reactors (CSTRs) operate under the same conditions with a reaction rate constant k of 0.02 min-1 and liquid volume of 500 L. Stream F1 enters CSTR-1 at 20 L/min with an A concentration of 0.5 mol/L. Stream F2 enters at 100 L/min with a B concentration of 1 mol/L. The reaction is pseudo-first order in A. 20% of the flow exiting CSTR-3 is recycled back to CSTR-1. The document asks to solve the material balances for components B, C, and D exiting the reactors using LU Decomposition.

Uploaded by

Ahmed Alwaqedi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CEB 2053 Process Modelling and Simulation

Name: Student ID:

Quiz 3

At steady state, F1 = 20 L/min with CA1 = 0.5 mol/L, and F2 = 100 L/min with CB2 =1 mol/L.
Since B is in highly excess, the reaction is considered as pseudo first order (-rA = kCA). The 3
reactors operating under the same condition with k = 0.02 min-1 and liquid volume of 500 L.
At CSTR-3, 20% of the exiting volumetric flowrate is recycled back to CSTR-1. Solve the
balance for components B, C, and D exiting reactors using LU Decomposition.

F1 F1 F1
CA1 CA1 CA1

F2
F7
CB2
CA7
F3 F4 CB7
CC7
F5 CD7
CSTR-1 CSTR-2 CSTR-3

F6

You might also like