J40U

Engine ref. 3029TFS29

Alternator ref. KH00500T
Performance class G3

GENERAL CHARACTERISTICS
Frequency (Hz) 60 Hz
Voltage (V) 480/277
Standard Control Panel APM303
Optional control panel TELYS
Optional Control Panel M80
Optional control panel NA

POWER
ESP PRP
Voltage Standby Amps
kWe kVA kWe kVA

480/277 40 50 36 45 60
440/254 40 50 36 45 66
DESCRIPTIVE 220/127 40 50 36 45 131
Mechanic governor 208/120 37 46 34 42 128
Mechanically welded chassis with antivibration
suspension
Main line circuit breaker DIMENSIONS COMPACT VERSION
Radiator for core temperature of 48/50°C max with Length (mm) 1700
mechanical fan Width (mm) 896
Protective grille for fan and rotating parts (CE option)
Height (mm) 1221
9 dB(A) silencer supplied separately
Dry weight (kg) 820
Charger DC starting battery with electrolyte
12 V charge alternator and starter Tank capacity (L) 100
Delivered with oil and coolant -30°C
Manual for use and installation DIMENSIONS SOUNDPROOFED VERSION
Type soundproofing M127
Length (mm) 2080
Width (mm) 960
Height (mm) 1415
Dry weight (kg) 1040
POWER DEFINITION
PRP : Prime Power is available for an unlimited number of annual Tank capacity (L) 100
operating hours in variable load applications, in accordance with ISO
8528-1. ESP : The standby power rating is applicable for supplying
Acoustic pressure level @1m in dB(A) 77
emergency power in variable load applications in accordance with ISO Guaranteed acoustic power level (Lwa)
8528-1. Overload is not allowed.
Acoustic pressure level @7m in dB(A) 67
TERMS OF USE
According to the standard, the nominal power assigned by the genset is
given for 25°C Air Intlet Temperature, of a barometric pressure of 100
kPA (100 m A.S.L), and 30 % relative humidity. For particular conditions
in your installation, refer to the derating table.
ASSOCIATED UNCERTAINTY
For the generating sets used indoor, where the acoustic pressure levels
depends on the installation conditions, it is not possible to specify the
ambient noise level in the exploitation and maintenance instructions .
You will also find in our exploitation and maintenance instructions a
warning concerning the air noise dangers and the need to implement
appropriated preventive measures.

04/04/2019
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 J40U
ENGINE CHARACTERISTICS

GENERAL ENGINE DATA EXHAUST

Engine brand JOHN DEERE Exhaust gas temperature @ ESP 60Hz (°C) 517
Engine ref. 3029TFS29 Exhaust gas flow @ ESP 60Hz (L/s) 138
Air inlet system Turbo Max. exhaust back pressure (mm H2O) 625
Cylinders configuration L
Number of cylinders 3 FUEL
Displacement (L) 2,91 Fuel consumption 100% ESP load (L/hr) 12,50
Charge Air coolant Fuel consumption 100% load (L/hr) 11,20
Bore (mm) x Stroke (mm) 106 x 110 Fuel consumption 75% PRP load (L/h) 8,70
Compression ratio 17.2 : 1 Fuel consumption 50% PRP load (L/h) 6
Speed (RPM) 1800 Maximum fuel pump flow (L/h) 108
Pistons speed (m/s) 6,60
Maximum stand-by power at rated
48
RPM (kW) OIL
Frequency regulation, steady state (%) +/- 2.5% Oil system capacity including filters (L) 6
BMEP @ PRP 60 Hz (bar) 10 Min. oil pressure (bar) 1
Governor type Mechanical Max. oil pressure (bar) 5
Oil consumption 100% ESP 60Hz (L/h) 0,01
COOLING SYSTEM Oil sump capacity (L) 5,30
Radiator & Engine capacity (L) 16,10
HEAT BALANCE
Heat rejection to exhaust (kW) 43
Fan power (kW) 2,20 Radiated heat to ambiant (kW) 5
Fan air flow w/o restriction (m3/s) 2,34 Heat rejection to coolant HT (kW) 28
Available restriction on air flow (mm
20
H2O)
Type of coolant Glycol-Ethylene AIR INTAKE
Max. intake restriction (mm H2O) 300
Intake air flow (L/s) 48,60

EMISSIONS
Emission PM (g/kWh)
Emission CO (g/kW.h)
Emission HC+NOx (g/kWh) 0
Emission HC (g/kW.h)

04/04/2019
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 J40U
ALTERNATOR CHARACTERISTICS

GENERAL DATA OTHER DATA

Alternator ref. KH00500T Continuous Nominal Rating 40°C (kVA) 51
Number of Phase Three phase Standby Rating 27°C (kVA) 57
Power factor (Cos Phi) 0,80 Efficiencies 100% of load (%) 90,10
Altitude (m) 0 à 1000 Air flow (m3/s) 0,2420
Overspeed (rpm) 2250 Short circuit ratio (Kcc) 0,35
Number of pole 4 Direct axis synchro reactance unsaturated (Xd) (%) 333,30
Capacity for maintaining short circuit at Quadra axis synchro reactance unsaturated (Xq) (%) 108,40
Yes
3 ln for 10 s
Open circuit time constant (T'do) (ms) 1280
Insulation class H
Direct axis transcient reactance saturated (X'd) (%) 13,20
T° class (H/125°), continuous 40°C H / 125°K
Short circuit transcient time constant (T'd) (ms) 58
T° class (H/163°C), standby 27°C H / 163°K
Direct axis subtranscient reactance saturated (X''d)
Total Harmonic Distortion in no-load 9,90
3,0 (%)
DHT (%)
Subtranscient time constant (T"d) (ms) 14
AVR Regulation Yes
Quadra axis subtranscient reactance saturated (X"q)
Total Harmonic Distortion, on linear load 28,40
1,6 (%)
DHT (%)
Subtranscient time constant (T"q) (ms) 13
Wave form : NEMA=TIF <45
Zero sequence reactance unsaturated (Xo) (%) 2,99
Wave form : CEI=FHT <2
Negative sequence reactance saturated (X2) (%) 21,20
Number of bearing Single Bearing
Armature time constant (Ta) (ms) 30
Coupling Direct
No load excitation current (io) (A) 0,80
Voltage regulation at established rating
1 Full load excitation current (ic) (A) 2,20
(+/- %)
Recovery time (Delta U = 20% 200 Full load excitation voltage (uc) (V) 23,30
transcient) (ms)
Engine start (Delta U = 20% perm. or 30% trans.)
Indication of protection IP 23 129,20
(kVA)
Technology Brushless Transcient dip (4/4 load) - PF : 0,8 AR (%) 14,01
No load losses (W) 996
Heat rejection (W) 4483
Unbalanced load acceptance ratio (%) 100

DIMENSIONS
Dimensions soundproofed version Dimensions DW compact version
Type soundproofing M127 Type soundproofing
Length (mm) 2080 Length (mm) 2160
Width (mm) 960 Width (mm) 966
Height (mm) 1415 Height (mm) 1388
Dry weight (kg) 1040 Dry weight (kg) 1002
Tank capacity (L) 100 Tank capacity (L) 230
Acoustic pressure level @1m in dB(A) 77 Acoustic pressure level @1m in dB(A)
Guaranteed acoustic power level (Lwa) Guaranteed acoustic power level (Lwa)
Acoustic pressure level @7m in dB(A) 67 Acoustic pressure level @7m in dB(A)
Dimensions DW soundproofed version Dimensions DW 48h soundproofed version
Type soundproofing M127 DW Type soundproofing M127 DW48
Length (mm) 2160 Length (mm) 2160
Width (mm) 966 Width (mm) 966
Height (mm) 1582 Height (mm) 1631
Dry weight (kg) 1210 %PdnetE_5% 1215
Tank capacity (L) 230 Tank capacity (L) 420
Acoustic pressure level @1m in dB(A) 77 Acoustic pressure level @1m in dB(A) 76
04/04/2019
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 Guaranteed acoustic power level (Lwa) Guaranteed acoustic power level (Lwa)
Acoustic pressure level @7m in dB(A) 67 Acoustic pressure level @7m in dB(A) 66

04/04/2019
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 J40U
CONTROL PANEL

APM303, comprehensive and simple TELYS, ergonomic and user-friendly

The highly versatile TELYS control unit is complex yet

accessible, thanks to the particular attention paid to
optimising its ergonomics and ease of use. With its large
display screen, buttons and scroll wheel, it places the
accent on simplicity and communication.
The APM303 is a versatile unit which can be operated in
manual or automatic mode. It offers the following features: The TELYS offers the following functions:
Measurements:
phase-to-neutral and phase-to-phase voltages, fuel level Electrical measurements: voltmeter, frequency meter,
(In option : active power currents, effective power, power ammeter.
factors, Kw/h energy meter, oil pressure and coolant
temperature levels) Engine parameters: working hours counter, oil pressure,
Supervision: coolant temperature, fuel level, engine speed, battery
Modbus RTU communication on RS485 voltage.
Reports:
(In option : 2 configurable reports) Alarms and faults: oil pressure, coolant temperature, failure
Safety features: to start, overspeed, alternator min./max., battery voltage
Overspeed, oil pressure,coolant temperatures, minimum min./max., emergency stop, fuel level.
and maximum voltage, minimum and maximum frequency
(Maximum active power P<66kVA) Ergonomics: wheel for navigating around the various
Traceability: menus.
Stack of 12 stored events
For further information, please refer to the data sheet for the Communication: remote control and operation software,
APM303. USB connections, PC connection.

For more information on the product and its options, please

refer to the sales documentation.

04/04/2019
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.
 M80, transfer of information Basic terminal block

The M80 is a dual-function control unit. It can be used as a The control unit can be used as a basic terminal block for
basic terminal block for connecting a control box and as an connecting a control box.
instrument panel with a direct read facility, with displays
giving a global view of your generating set's basic Offers the following functions:
parameters.
emergency stop button, customer connection terminal
Offers the following functions: block, CE.

Engine parameters: tachometer, working hours counter,

coolant temperature indicator, oil pressure indicator,
emergency stop button, customer connection terminal
block, CE.

04/04/2019
This document is not contractual - The SDMO company reserves the right to modify any of the characteristics stated in this document without notice, in a constant effort to
improve the quality of its products. *ISO 8528.