Scribd
Upload
301 views2 pages

MIDAS Gen Analysis Features

midas Gen is an integrated design system for structural analysis and design of buildings and general structures. It offers a range of finite element types and analysis modules, including static, dynamic, buckling, heat transfer and nonlinear analyses. It also includes design modules for steel, concrete, masonry and composite structures. Additional modules can be purchased for advanced dynamic analysis, material nonlinearity, and construction stage analysis.

Uploaded by

Andreas Pratama
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
301 views2 pages

MIDAS Gen Analysis Features

midas Gen is an integrated design system for structural analysis and design of buildings and general structures. It offers a range of finite element types and analysis modules, including static, dynamic, buckling, heat transfer and nonlinear analyses. It also includes design modules for steel, concrete, masonry and composite structures. Additional modules can be purchased for advanced dynamic analysis, material nonlinearity, and construction stage analysis.

Uploaded by

Andreas Pratama
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

midas Gen

Integrated Design Systems for


Building and General Structures

Item Module

midas Gen Unlimited Nodes (Elements)


-Plus- Static Analysis
Dynamic Analysis
- Eigen (Lanczos) and Ritz vector Analyses
- Response Spectrum Analysis
- Time History Analysis
Pushover Analysis
P-Delta Analysis
Buckling Analysis
Thermal Stress Analysis
Moving Load Analysis
Masonry Wall Analysis (Linear/Nonlinear)
Design (Steel, Concrete & SRC)
- AISC (LRFD & ASD), CSA S16.1, BS 5950 & Eurocode3
- ACI 318, CSA-A23.3, BS 8110 & Eurocode2
Section Property Calculator for irregular sections
midas Gen *Includes -Plus- Version functionality and:
-Advanced- Construction Stage Analysis (Time-dependent)
- Creep, Shrinkage & Mod. of Elasticity
- Tension losses in tendons
- Column Shortening
- Construction Stage Wizard
Large Displacement Analysis (Cable structures)
Post-tensioning & Prestressing
Boundary Nonlinear Dynamic Analysis
(Gap, Hook, Damper, Isolator, Hysteretic System, etc.)
Options for Advanced Version
Option 1 Heat of Hydration Analysis for Mass Concrete
- Heat Transfer Analysis based on construction stages
- Convection, Heat Source, Pipe cooling, etc.
Option 2 Material Nonlinear Analysis
- Truss, Plate, Plane stress, Plane strain, Axisymmetric and Solid
- Tresca, von Mises, Mohr-Coulomb and Drucker-Prager
- Isotropic, kinematic and mixed hardening
Option 3 Inelastic Time History Analysis
- Beam element
- Lumped hinge & Distributed hinge
- Automatic calculation of yield strength
- Fiber model
- Axial load – biaxial moment interaction
midas Gen
midas Gen Advanced + All Options (1, 2, 3)
-Full Version-

PT. MIDASINDO TEKNIK UTAMA 1


MODS (Annual Maintenance + Service Module)
MODS Service Software Update
Technical Support

MODS Module midas Design+


- Unit member design (connectuin, footing, composite)
Automatic Mesh Generator for Plane Wall and Slabs
- Planar Mesh Generation for 2D Elements (Plate, Plane Stress, Plane Strain)
- Automesh Planar Area (Automatic consideration of internal columns and walls)
- Mapped Mesh Generation Using 4 Nodes
Slab & Meshed Wall Design (Eurocode 2)
- Flexural design (Wood-Armer moment)
- Punching shear check
- Serviceability check (Stress, Crack width, deflection)
GSD (General Section Design)
- Draw Arbitrary Cross-sections (RC, Steel, Composite)
- Moment-Curvature Curves for Different Axial Loads
- Stress Contours for Combined Loading
- Capacity Curves (P-M, M-M, 3D) & Capacity Check Ratio (Eurocode)

Finite Element Library for midas Gen


Module Finite Element Library
- General Beam - Plane Stress
- Tapered Beam - Plane Strain
- Truss - Plate (Thick/Thin, In-plane/out-of-plane Thickness & Orthotropic materials)
-Plus- - Compression Only - Stiffened Plate
- Tension Only - Solid (Hexahedron, Pentahedron & Tetrahedron)
- Gap - Cable (Equivalent Truss Type)
- Hook - Rigid Link
- Mass/Spring/Damper
- All -Plus- module finite elements
-Advanced-
- Cable (Elastic Catenary Type in Advanced ver.)

PT. MIDASINDO TEKNIK UTAMA 2

You might also like