ROMANIAN ACADEMY OF TECHNICAL SCIENCES

“CONSTANTIN BRÂNCUŞI”
UNIVERSITY OF
TÂRGU – JIU

FACULTY OF ENGINEERING

PROGRAM

NATIONAL SCIENTIFIC
CONFERENCE
WITH INTERNATIONAL PARTICIPATION
“CONFERENG 2020”

20 November 2020
TÂRGU – JIU
ROMANIA
2
 HONORARY COMMITTEE
Professor PhD Adrian GORUN, President of "Constantin Brancusi" University Senate,
Honorary member of the Romanian Academy of Scientists
Professor PhD Mihai MIHĂIŢĂ, President of the Romanian Academy of Technical Sciences
Professor PhD Florin TANASESCU, Vice-president of the Romanian Academy of Technical
Sciences
Professor PhD Sorin Vasile PUREC, Rector of "Constantin Brancusi" University

3
 SCIENTIFIC COMMITTEE
President: Assoc. prof. PhD Cristinel POPESCU, "Constantin Brâncuşi" University of Târgu-Jiu / Dean of
Faculty of Engineering
Vice-president: Professor PhD Liliana LUCA, "Constantin Brâncuşi" University of Târgu-Jiu
Members:
Professor PhD Panagiotis SINIORUS, Technological Education Institute of Piraeus, Greece
Professor PhD Yury GUTSALENKO , Kharkov Polytechnic Institute, Ucraina
Professor PhD Ioannis TSIAFIS, Aristotle University of Thessaloniki, Greece;
Professor PhD Walter Leal FILHO, Hamburg University of Applied Sciences (HAW), Research and Transfer
Centre "Applications of Life Sciences"
Professor PhD Josef TIMMERBERG, Jade University, Wilhelmshaven, Germany
Assoc. prof. PhD Georgi Tsonev VELEV, Technical University of Gabrovo,, Bulgaria
Assoc. prof. PhD Radostin DIMITROV, Technical University of Varna,, Bulgaria
Professor PhD Iulian POPESCU, University of Craiova, member of the Romanian Academy of Technical
Sciences
Professor PhD Constantin MILITARU, Polytechnic University of Bucharest
Professor PhD Paun ANTONESCU, Polytechnic University of Bucharest
Professor PhD Dan DOBROTA, University "Lucian Blaga" of Sibiu
Professor PhD Gilbert Rainer GILLICH, Babeș-Bolyai University of Cluj-Napoca
Professor PhD Eugen RĂDUCA, Babeș-Bolyai University of Cluj-Napoca
Professor PhD Sava IANICI, Babeș-Bolyai University of Cluj-Napoca
Professor PhD Codruţa Oana HAMAT, Babeș-Bolyai University of Cluj-Napoca
Professor PhD Liviu Marius CÎRTINĂ, "Constantin Brancusi" University of Targu-Jiu
Professor PhD Mihai CRUCERU, "Constantin Brancusi" University of Targu-Jiu
Professor PhD Cristinel RACOCEANU, "Constantin Brancusi" University of Targu-Jiu
Professor PhD Catalin IANCU, "Constantin Brancusi" University of Targu-Jiu
Professor PhD Daniela CÎRTINĂ, "Constantin Brancusi" University of Targu-Jiu
Professor PhD Gheorghe GĂMĂNECI, "Constantin Brancusi" University of Targu-Jiu
Professor PhD Ştefan GHIMIŞI, "Constantin Brancusi" University of Targu-Jiu
Assoc. prof. PhD Mirela CHERCIU, University of Craiova
Assoc. prof. PhD Bogdan DIACONU, "Constantin Brancusi" University of Targu-Jiu
Assoc. prof. PhD Florin GROFU, "Constantin Brancusi" University of Targu-Jiu
Assoc. prof. PhD Mădălina BUNECI, "Constantin Brancusi" University of Targu-Jiu
Assoc. prof. PhD Ilie BORCOSI, "Constantin Brancusi" University of Targu-Jiu
Assoc. prof. PhD Roxana POPA, "Constantin Brancusi" University of Targu-Jiu
Lecturer PhD Cornel HAŢIEGAN, Babeș-Bolyai University of Cluj-Napoca
Lecturer PhD Nicoleta MIHUŢ, "Constantin Brancusi" University of Targu-Jiu

4
 ORGANIZING COMMITTEE

President: Assoc. prof. PhD Cristinel POPESCU

Secretary: Professor PhD Liliana LUCA
Members:
Professor PhD Mihai CRUCERU
Professor PhD Liviu Marius CÎRȚÎNĂ
Professor PhD Catalin IANCU
Professor PhD Sorinel Stefan GHIMIȘI
Professor PhD Cristinel RACOCEANU
Assoc. prof. PhD Florin GROFU
Lecturer PhD Carmen BĂRBĂCIORU
Lecturer PhD Maria Nicoleta MIHUŢ
Lecturer PhD Alin STĂNCIOIU
Lecturer PhD Irina Ramona PECINGINĂ
Lecturer PhD Adriana FOANENE
Lecturer PhD Gheorghe GILCĂ
Lecturer PhD Lucica ANGHELESCU

5
 CONFERENCE SCHEDULE

Friday, 20 November 2020

1030 - 1100 - Opening ceremony, online

1100 - 1400 - Conference sessions (works presentations by sections), online

1400 - 1430 - Break

1430 - 1730 - Conference sessions (works presentations by sections), online

THE SECTIONS OF THE CONFERENCE

1. Control system, electronics, information technology and cyber

security

2. Environmental engineering, public feeding and sustainable

development

3. Power and electrical engineering

4. Mechanical engineering, materials and manufacturing systems

5. Quality management

6
 Section 1

CONTROL SYSTEM, ELECTRONICS, INFORMATION TECHNOLOGY AND

CYBER SECURITY

Date 20. 11. 2020

Hours : 1100 - 1400

Chairmen: Assoc. prof. PhD. Grofu Florin, “Constantin Brâncuși” University from Târgu Jiu
Co-chairmen: Lecturer PhD. M.D. Stroia, Babeș-Bolyai University
Tehnical secretariat: Lecturer PhD. Gȋlca Gheorghe, “Constantin Brâncuși” University from Târgu Jiu

1. VIRTUAL INSTRUMENT DESIGNED FOR DETECTING DISTORTION REGIME

CAUSED BY FREQUENCY VARIATION
M.D. Stroia, Department of Engineering Science, Babeș-Bolyai University, Reșița, ROMANIA
C. Hațiegan, Department of Engineering Science, Babeș-Bolyai University, Reșița, ROMANIA
C.Popescu, “Constantin Brȃncuşi” University of Tȃrgu Jiu, ROMANIA
C.M. Andrei, Department of Engineering Science Babeș-Bolyai University, Reșița, ROMANIA

2. THE EFFICIENCY OF THE AUTOMATION SYSTEM AND DEVELOPMENT IN

WATER AND WASTEWATER SYSTEMS
Prof. COSTACHE (Bira) M. LENUTA, UNIVERSITATEA POLITEHNICA BUCURESTI

3. FUZZY GROUPOID MORPHISMS AND ACTIONS

Mădălina Roxana Buneci, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA

4. MEAN SQUARE ASYMPTOTIC STABILITY OF DISCRETE-TIME LINEAR

FRACTIONAL ORDER SYSTEMS WITH MARKOVIAN JUMPS
Viorica Ungureanu,, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA

5. ON SOME OPERATIONS OF M-POLAR INTUITIONISTIC FUZZY GRAPHS

Iuliana Carmen Bărbăcioru, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA

6. FLOW CONTROL OF BLDC ENGINES AT SMALL RPM

Grofu Florin, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA
Marcuș Răzvan, Constantin Brâncuși” University from Târgu Jiu, ROMANIA

7. CREATING LOGIN AND REGISTRATION FORMS IN C #

Gîlcă Gheorghe, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA
Borcoși Ilie, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA
Runceanu Adrian, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA

8. SMALL GENERATOR IN TO THE COVER

Marcuș Răzvan, Assist. PhD Stud. Eng.“Constantin Brâncuși”University from Târgu Jiu,
ROMANIA

9. GENARATOR AUTOMATIC START SYSTEM FOR BACKUP POWER

Grofu Florin, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA
7
 Marcuș Răzvan, Constantin Brâncuși” University from Târgu Jiu, ROMANIA

10. INCREASING PRODUCTION OF PHOTOVOLTAIC PANELS

Marcuș Răzvan, Assist. PhD Stud. Eng.“Constantin Brâncuși”University from Târgu Jiu,
ROMANIA

8
 Section 2
ENVIRONMENTAL ENGINEERING, PUBLIC FEEDING AND SUSTAINABLE
DEVELOPMENT

Date 20. 11. 2020

Hours : 1100 - 1400

Chairmen: Prof. PhD. Daniela Cirtina, “Constantin Brâncuși” University from Târgu Jiu
Co-chairmen: Assoc. prof. PhD. Roxana Popa, “Constantin Brâncuși” University from Târgu Jiu
Tehnical secretariat: Lecturer PhD. Emil Catalin Schiopu, “Constantin Brâncuși” University from Târgu Jiu

1. ASPECTS REGARDING THE ACTION OF FOREIGN SUBSTANCES IN FOOD

Daniela Cîrţînă, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA

2. ROMANIAN REGIONAL POLICY

Amelia Boncea, University “Constantin Brâncuşi”, Tg-Jiu, ROMANIA

3. CONTAMINATION OF FOOD WITH POLYCYCLIC AROMATIC

HYDROCARBONS
Popa Roxana – Gabriela, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA

4. CONSIDERATIONS REGARDING THE TOXICITY OF NITROSAMINES IN

FOOD
Daniela Cîrţînă, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA

5. NEW RECYCLING DIRECTIONS FOR ASH RESULTING FROM LOW-GRADE

COAL DEPOSITED IN ASH DUMP SITE
George Serban, University “Politehnica” of Bucharest, ROMANIA
Mihai Cruceru, University “Constantin Brancusi” of Targu Jiu, ROMANIA
Rodica David, Technical University of Petroșani, ROMANIA

6. TOXICITY OF CANNED TUNA

Popa Roxana – Gabriela, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA

7. CONSIDERATIONS ON THE WATER SOURCE IN VIEW OF THE LOCATION

OF A HYDROTECHNICAL CONSTRUCTION
Cristina Ionici, University “Constantin Brâncuşi”, Tg-Jiu, ROMANIA

8. GREENING OF SLAG AND ASH DEPOSITS

Tudorache Adriana, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA
Georgi Tsonev Velev, Technical University of Gabrovo, Bulgary
Daniela Cîrţînă, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA

9. ASPECTS REGARDING THE CULTIVATION AND USE OF AROMATIC PLANTS

IN FOOD
Pecingină Irina-Ramona, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA

9
Date 20. 11. 2020
Hours : 1430 - 173o

Chairmen: Prof. PhD. Daniela Cirtina, “Constantin Brâncuși” University from Târgu Jiu
Co-chairmen: Assoc. prof. PhD. Popa Roxana, “Constantin Brâncuși” University from Târgu Jiu
Tehnical secretariat: Lecturer PhD. Schiopu Emil Catalin, “Constantin Brâncuși” University from Târgu Jiu

10. VEGETABLE PRODUCTS USED FOR THE EXTRACTION OF NATURAL DYES

Șchiopu Emil Cătălin, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA

11. STUDY ON THE NUTRITIVAL VALUE OF FOOD PRODUCTS

Ramona Violeta Cazalbaşu, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA

12. STUDY FOR EVALUATING THE WATER QUALITY OF THE JIU RIVER IN
GORJ COUNTY
Delia Nica-Badea, Constantin Brancusi University Targu – Jiu, ROMANIA
Aniela Balacescu, Constantin Brancusi University Targu – Jiu, ROMANIA

13. IMPORTANCE IN DIET OF CONSUMPTION OF DRIED VEGETABLES AND

FRUIT
Pecingină Irina-Ramona, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA

14. INDUSTRIAL INSTALLATIONS USED IN THE SELECTION OF FOOD

PRODUCTS
Șchiopu Emil Cătălin, “Constantin Brâncuși” University from Târgu Jiu, ROMANIA

15. CONSIDERATIONS ON THE ASPECTS OF LIFE AND THE SOCIAL

FRAMEWORK PRODUCED BY HYDRO-ENERGY ARRANGEMENTS
Cristina Ionici, University “Constantin Brâncuşi”, Tg-Jiu, ROMANIA

10
 Section 3
POWER AND ELECTRICAL ENGINEERING
and
Section 5
QUALITY MANAGEMENT

Date 20. 11. 2020

Hours : 1100 - 1400
Chairmen: Prof. PhD. Mihai Cruceru, “Constantin Brâncuși” University from Târgu Jiu
Co-chairmen: Assoc. prof. PhD. Diaconu Bogdan, “Constantin Brâncuși” University from Târgu Jiu
Tehnical secretariat: Lecturer Ph.D. Tudorache Adriana, “Constantin Brâncuși” University from Târgu Jiu

1. UNDERSTANDING TIME-FREQUENCY REPRESENTATIONS USING EXCEL

Andrea Amalia Minda, Babeș-Bolyai University, Cluj-Napoca, ROMANIA
Nicoleta Gillich, Babeș-Bolyai University, Cluj-Napoca, ROMANIA
Cristinel Popescu, “Constantin Brâncuși” University, Târgu Jiu, ROMANIA
Gilbert-Rainer Gillich, Babeș-Bolyai University, Cluj-Napoca, ROMANIA

2. APPLICATION FOR SIMULATING AND ANALYSIS OF A SERIAL R-L-C

CIRCUIT
C. Hațiegan, Department of Engineering Science, Babeș-Bolyai University, Reșița, ROMANIA
M.D. Stroia, Department of Engineering Science, Babeș-Bolyai University, Reșița, ROMANIA
C.Popescu, “Constantin Brȃncuşi” University of Tȃrgu Jiu, ROMANIA
C.M. Muscai, Polytechnic University of Bucharest, Faculty of Electrical Engineering, Bucuresti,
Department of Engineering Science, Babeș-Bolyai University, Reșița, ROMANIA

3. MODELING AND SIMULATION OF HEAT TRANSFER IN ANSYS IN A ROOM

OF A HOUSE
Mihaela MOLNAR, Babes -Bolyai University, Cluj Napoca, ROMANIA
Eugen RĂDUCA, Babes -Bolyai University, Cluj Napoca, ROMANIA
Ana-Maria BUDAI, Babes -Bolyai University, Cluj Napoca, ROMANIA
Silvia Teodora ORBAI, Reșița, ROMANIA

4. THE VARIATION OF TEMPERATURE MEASURED FOR HEAT EXCENGER

Eugenia Adriana Stăncuț, Faculty of Mechanical Engineering University of Craiova, ROMANIA
Corina Dana Cernăianu, Faculty of Mechanical Engineering University of Craiova, ROMANIA

5. POSSIBILITIES TO RECYCLE THE BOTTOM ASH FROM COAL FIRED

BOILERS. PART I. METHODOLOGY
Mihai Cruceru, University Constantin Brâncuși of Tg-Jiu, ROMANIA
Bogdan Diaconu, University Constantin Brâncuși of Tg-Jiu, ROMANIA
Lucica Anghelescu, University Constantin Brâncuși of Tg-Jiu, ROMANIA

6. POSSIBILITIES TO RECYCLE THE BOTTOM ASH FROM COAL FIRED

BOILERS. PART II. RESULTS
Mihai Cruceru, University Constantin Brâncuși of Tg-Jiu, ROMANIA
Lucica Anghelescu, University Constantin Brâncuși of Tg-Jiu, ROMANIA
Bogdan Diaconu, University Constantin Brâncuși of Tg-Jiu, ROMANIA

7. ANALYZE OF “BLACK GOLD” - COAL

Tudorache Adriana, University Constantin Brâncuși of Tg-Jiu, ROMANIA
Josef Timmeberg, Jade University of Applied Science, Wilhelmshaven, GERMANY
Liviu Marius Cîrțînă, University Constantin Brâncuși of Tg-Jiu, ROMANIA
11
 8. THE USE OF WASTE FROM ENERGY INDUSTRY - NEW OPPORTUNITIES
WITHIN GREEN DEAL CONTEXT
Luminița Georgeta Popescu, University Constantin Brâncuși of Tg-Jiu, ROMANIA

9. COMPARATIVE STUDY OF THE CALCULATION OF ERRORS IN ELECTRIC

ARC WELDING IN X60 STEEL SHIELDING GAS MEDIUM
Cîndea L., UBB University Center from Resita, Faculty of Engineering, ROMANIA
Iancu V., UBB University Center from Resita, Faculty of Engineering, ROMANIA

10. EXERGY ANALYSIS OF POWER EQUIPMENT – PART I: GENERAL EXERGY

BALANCE
Cristinel Racoceanu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA

11. EXERGY ANALYSIS OF POWER EQUIPMENT – PART II: EXERGY

EFFICIENCY OF THE COMBUSTION PROCESS
Cristinel Racoceanu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA

Date 20. 11. 2020

Hours : 1430 - 1730

Chairmen: Prof. PhD. Mihai Cruceru, “Constantin Brâncuși” University from Târgu Jiu
Co-chairmen: Assoc. prof. PhD. Diaconu Bogdan, “Constantin Brâncuși” University from Târgu Jiu
Tehnical secretariat: Lecturer Ph.D. Tudorache Adriana, “Constantin Brâncuși” University from Târgu Jiu

12. GRAPH THEORY APPLICATION IN PLANNING POWER EQUIPMENT

MAINTENANCE OPERATIONS
Bogdan Diaconu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Mihai Cruceru, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Lucica Anghelescu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Marius Vlaicu, CEO, ROMANIA

13. VERIFICATION OF POWER TRANSFORMERS VECTOR GROUP BY MEANS

OF A SIMPLE AND PRECISE PROCEDURE
Bogdan Diaconu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Mihai Cruceru, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Lucica Anghelescu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Rodica David, Technical University of Petroșani, ROMANIA

14. ELECTROSTATIC PRECIPITATOR PHYSICAL MECHANISMS – DEUTSCH

MODEL
Lucica Anghelescu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Mihai Cruceru, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Bogdan Diaconu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA

15. BIOMASS AS A FUEL FOR COAL-FIRED BOILERS. CASE STUDY – ROVINARI

THERMAL POWER PLANT
Lucica Anghelescu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Bogdan Diaconu, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA
Mihai Cruceru, University “Constantin Brâncuși” of Tg-Jiu, ROMANIA

12
 QUALITY MANAGEMENT

16. CONSIDERATIONS ON ONLINE ENGINEERING EDUCATION IN THE COVID-

19 PANDEMIC
Eugen Răduca, Babes -Bolyai University, Cluj Napoca, ROMANIA
Cristinel Popescu, “Constantin Brâncuşi” University, Târgu Jiu, ROMANIA
Codruța-Oana Hamat*, Babes -Bolyai University ,Cluj Napoca, ROMANIA
Mihaela Molnar, Babes -Bolyai University , Cluj Napoca, ROMANIA
Ileana Rotaru, West University, Timișoara, ROMANIA
Roberta Răduca, Politehnica University, Timișoara, ROMANIA

17. POSSIBLE METHODS OF MANAGEMENT AND DEVELOPMENT COMPANY

Amelia Boncea, University “Constantin Brâncuşi”, Tg-Jiu, ROMANIA

18. STUDY CONCERNING THE QUALITY TOOL USE FOR THE BOLTS QUALITY
IMPROVEMENT
Liliana Luca, University Constantin Brancusi of Targu-Jiu, , ROMANIA

13
 Section 4
MECHANICAL ENGINEERING, MATERIALS
AND MANUFACTURING SYSTEMS
Date 20. 11. 2020
Hours : 1100 - 1400

Chairmen: Professor PhD. Cȋrtȋnă Liviu, “Constantin Brâncuși” University from Târgu Jiu
Co-chairmen: Professor PhD. Ghimisi Stefan, “Constantin Brâncuși” University from Târgu Jiu
Tehnical secretariat: Lecturer PhD. Rădulescu Constanţa, “Constantin Brâncuși” University from Târgu Jiu

1. THE COMPLEX PLANETARY MECHANISMSUSED AS THE AUTOMATION

TRANSMISSIONS
Ovidiu Antonescu, Politehnica University of Bucharest, ROMANIA
Margareta Strimbeanu, High School Iuliu Maniu of Bucharest, ROMANIA
Paun Antonescu, Politehnica University of Bucharest, ROMANIA

2. DESIGN AND IMPLEMENTATION OF A MILLING MACHINE WITH

NUMERICAL CONTROL ALONG THREE AXES
Iosif Dumitrescu, University of Petroşani, Petroşani, ROMANIA
Răzvan Bogdan Itu, University of Petroşani, Petroşani, ROMANIA
Bogdan Ioan Marc, University of Petroşani, Petroşani, ROMANIA

3. AUTOMOTIVE DOOR LATCH MECHANISMS

Ovidiu Antonescu, Politehnica University of Bucharest, ROMANIA
Ioana Popescu, Iuliu Maniu High School of Bucharest, ROMANIA
Daniela Antonescu, Iuliu Maniu High School of Bucharest , ROMANIA

4. STUDY OF A MECHANISM FOR GENERATING INVERSE CURVES

Mirela Cherciu, University of Craiova, ROMANIA
Iulian Popescu, Emeritus Professor, University of Craiova, ROMANIA
Liliana Luca, University "Constantin Brâncuși", Tg.Jiu, ROMANIA

5. ANALYSIS OF RESIDUAL STRESSES AND DURABILITY OF THE CUTTING

INSERTS AFTER DIAMOND-SPARK GRINDING
Yury Sizyi, Nat. Tech. Univ. “Kharkov Polytech. Inst.”, Kharkov, Ukraine
Roman Strelchuk, ME Doctoral Candidate, Nat. Tech. Univ. “Kharkov Polytech. Inst.”, Kharkov,
UKRAINE
Shailendra Kumar Jha, University of Delhi, New Delhi, INDIA
Alexander Rudnev, Sen. Staff Scientist, Nat. Tech. Univ. “Kharkov Polytech. Inst.”, Kharkov,
UKRAINE
Yury Gutsalenko, Sen. Staff Scientist, Nat. Tech. Univ. “Kharkov Polytech. Inst.”, Kharkov,
UKRAINE

6. TECHNICAL EXPERTISE OF THE WHEEL'S ARM -COAL EXTRACTION

MACHINE - T2052
Cîrţînă Liviu Marius, “Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA
Rădulescu C., Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA
Stăncioiu A., Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA

7. NON-DESTRUCTIVE CONTROL ON QUARRY MACHINERY TYPE ERc 1400-

30/7
Radu Sorin Mihai, Technical University of Petrosani, ROMANIA
Rodica David, Technical University of Petrosani, ROMANIA

14
8. STUDY OF CONSTRUCTIVE IMPROVEMENT OF CABLE WINDING DRUMS
FOR THE LIFTING MECHANISM OF THE BUCKET HOLDER WHEEL OF
EsRc-1400 EXCVATOR
Iosif Dumitrescu, University of Petroşani, Petroşani, ROMANIA
Răzvan Bogdan Itu, University of Petroşani, Petroşani, ROMANIA
Bogdan Ioan Marc, University of Petroşani, Petroşani, ROMANIA

9. SYNTHESIS AND ANALYSIS OF A MECHANISM WITH THREE DYADS AND

TWO DRIVING ELEMENTS
Iulian Popescu, Emeritus Professor, University of Craiova, ROMANIA
Mirela Cherciu, University of Craiova, ROMANIA
Liliana Luca, University "Constantin Brâncuși", Tg.Jiu, ROMANIA

10. TECHNICAL INSPECTION FOR PATH OF ROLLING FROM COAL REMOVAL

MACHINE
Cîrţînă Liviu Marius, “Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA
Stăncioiu A., Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA
Rădulescu C., Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA

11. EXPERIMENTAL INVESTIGTION OF THE FRETTING

Stefan Ghimiși, Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA

12. APPLICATION OF MINIMUM LUBRICATION METHODOLOGY FOR

DIAMOND SPARK GRINDING
Yury Gutsalenko, Nat. Tech. Univ. “Kharkov Polytech. Inst.”, Kharkov, UKRAINE
Cătălin Iancu, Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA
Alexander Rudnev, Nat. Tech. Univ. “Kharkov Polytech. Inst.”, Kharkov, UKRAINE
Roman Strelchuk, Nat. Tech. Univ. “Kharkov Polytech. Inst.”, Kharkov, UKRAINE

13. FORCES AND ENERGY EFFICIENCY OF DIAMOND AND DIAMOND SPARK

GRINDING OF TUNGSTEN-COBALT HARD ALLOY
Yury Gutsalenko, Nat. Tech. Univ. “Kharkov Polytech. Inst.”, Kharkov, UKRAINE

14. RESEARCH CONCERNING THE SYLVESTER- KEMPE INVERTER

Liliana Luca, University Constantin Brancusi of Targu-Jiu, ROMANIA
Iulian Popescu, University of Craiova, member of the Romanian Academy of Technical Sciences
Mirela Cherciu, University of Craiova

15. SYNTHESIS OF A HOSPITAL BED LIFTING AND TILTING MECHANISM

USING ADVANCED SIMULATION TECHNIQUES
Doru-Ioan Boblea, Biomechanical Devices Designer, IRELAND
Mariana Trofimescu, "Dinu Lipatti" High School, Bucharest, ROMANIA
Paun Antonescu, Politehnica University of Bucharest, ROMANIA

16. STUDY ON THE IMPLEMENTATION OF A PREVENTIVE MENTENANT PLAN

FOR THE IMPROVAL OF THE PERFORMANTS OF A PRELUCRATION
CENTRE WITH 6 AXES
Solomon Aurelian, Polytechnic University of Bucharest, Faculty of Industrial Engineering &
Robots, Mechanisms & Robots Theory Department, Bucharest, ROMANIA
Vasile Mihai, Polytechnic University of Bucharest, Faculty of Industrial Engineering & Robots,
Mechanisms & Robots Theory Department, Bucharest, ROMANIA
Iosif Tempea, Polytechnic University of Bucharest, Faculty of Industrial Engineering & Robots,
Mechanisms & Robots Theory Department, Bucharest, ROMANIA

15
 17. STUDY OF THE ELASTIC DEFORMATION OF A SHORT FLEXIBLE TOOTHED
WHEEL UNDER THE ACTION OF A TWO - ROLLERS WAVE GENERATOR
Sava Ianici, Babeş Bolyai University, University Center from Resita, Faculty of Engineering,
ROMANIA
Draghiţa Ianici, Babeş Bolyai University, University Center from Resita, Faculty of Engineering,
ROMANIA

18. ABOUT 3D PRINTING OF METALLIC MATERIALS

Cătălin Iancu, Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA

Date 20. 11. 2020

Hours : 1430 - 1730

Chairmen: Professor PhD. Cȋrtȋnă Liviu, “Constantin Brâncuși” University from Târgu Jiu
Co-chairmen: Professor PhD. Ghimisi Stefan, “Constantin Brâncuși” University from Târgu Jiu
Tehnical secretariat: Lecturer PhD. Rădulescu Constanţa, “Constantin Brâncuși” University from Târgu Jiu

19. AN ANALYSIS OF STAINLESS STEEL SERIES 200 VS. SERIES 300

Alin Nioaţă, Engineering Faculty, ”Constantin Brâncuşi” University of Tg-Jiu, ROMANIA
Florin Ciofu, Engineering Faculty, ”Lucian Blaga” University of Sibiu, ROMANIA

20. EQUIPMENT FOR DETERMINING THE FLOW PROPERTIES OF GRANULAR

AND POWDERING MATERIALS
Florin Ciofu, Engineering Faculty, ”Lucian Blaga” University of Sibiu, ROMANIA
Alin Nioaţă, Engineering Faculty, ”Constantin Brâncuşi” University of Tg-Jiu, ROMANIA

21. CONSIDERATIONS REGARDING THE X-RAY FLUORESCENT

SPECTROMETRY
Mihut Nicoleta-Maria, “Constantin Brâncuși” University of Târgu Jiu, ROMANIA

22. APPROACH REGARDING COMPOSITE ELECTRODEPOSITIONS

Pasăre Minodora-Maria, “Constantin Brâncuși” University of Târgu Jiu, ROMANIA

23. ASPECTS REGARDING REINFORCEMENT WITH COMPOSITE MATERIALS

Cătălina Ianăşi, University “Constantin Brancusi” of Tg-Jiu, ROMANIA

24. TECHNICAL EXPERTISE OF THE ROTARY PLATFORM - ASSEMBLY OF THE

COAL EXTRACTION MACHINE - T2052
Rădulescu C., University ,,Constantin Brâncuși,, from Târgu-Jiu, ROMÂNIA
Cîrțînă L.M., University ,,Constantin Brâncuși,, from Târgu-Jiu, ROMÂNIA
Stăncioiu A., University ,,Constantin Brâncuși,, from Târgu-Jiu, ROMÂNIA

25. THE EXPERTISE OF THE ENSEMBLE ,,THE METAL BEAM - SECTION II"-
COAL EXTRACTION MACHINE - T2052
Rădulescu C., University ,,Constantin Brâncuși,, from Târgu-Jiu, ROMÂNIA
Cîrțînă L.M., University ,,Constantin Brâncuși,, from Târgu-Jiu, ROMÂNIA
Penka Zlateva, Technical University – Varna, BULGARIA
Stăncioiu A., University ,,Constantin Brâncuși,, from Târgu-Jiu, ROMÂNIA

26. CALCULATION OF THE FIRST OWN PULSATION FOR THE SYSTEM WITH A
DEGREE OF FREEDOM FOR AN ABOVE-GROUND PARKING
Carmen Elisabeta Radu, University POLITEHNICA of Bucharest, ROMANIA
Edward Rășchitor, UniversityPOLITEHNI CA of Bucharest, ROMANIA
Iosif Tempea, University POLITEHNICA of Bucharest, ROMANIA
16
27. SEISMIC PROTECTION OF AN OVERGROUND PARKING OVER THE
DAMBOVITA RIVER BY USING THE BASIC CONTAINMENT METHOD. THE
ANTI-SEISMIC PROTECTION SYSTEM.
Edward Rășchitor, UniversityPOLITEHNI CA of Bucharest, ROMANIA
Carmen Elisabeta Radu, University POLITEHNICA of Bucharest, ROMANIA
Iosif Tempea, University POLITEHNICA of Bucharest, ROMANIA

28. EXTENDED TECHNICAL INSPECTION OF THE INCLINED ARM OF THE M5A

COAL REMOVER
Stăncioiu A., Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA
Cîrţînă Liviu Marius, “Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA
Rădulescu C., Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA

29. NANOMATERIALS AND NANOTECHNOLOGIES-APPLICATIONS IN

DIFFERENT FIELDS OF ACTIVITY
Adina Tătar - University “Constantin Brâncuşi”, Tg-Jiu, ROMANIA

30. EXTENDED TECHNICAL INSPECTION OF THE LIFTING MECHANISM

SUPPORT PLATFORM OF THE M5A COAL REMOVER
Stăncioiu A., Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA
Cîrţînă Liviu Marius, “Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA
Rădulescu C., Constantin Brâncuşi’’ University of Tg-Jiu, ROMANIA

31. INVESTIGATION OF THE REMOVAL OF THE DIAMOND LAYER OF A

WHEEL DURING ED GRINDING WITH CHANGING POLARITY OF
ELECTRODES
Roman Strelchuk, Nat. Tech. Univ. “Kharkov Polytech. Inst.”, Kharkov, UKRAINE

32. RESEARCH ON NEW MANUFACTURING TECHNOLOGIES OF RUBBER

MATERIALS WITH AUTOMATIC INDUSTRY APPLICATIONS
Dimulescu Sabin Cristinel, Lucian Blaga University of Sibiu, ROMANIA
M. Wetternek, Colegiul Tehnic Resita, ROMANIA

33. ANALYSIS OF THE FACTORS THAT INFLUENCE THE PROCESSING

PRECISION AND THE EFFECTS OF THE VIBRATIONS FROM THE CUTTING
PROCESS ON IT
Mădălin Tomescu, Lucian Blaga University of Sibiu, Sibiu, ROMANIA
Cosmin Ionescu, Energy High School of Tg-Jiu, Gorj, ROMANIA

34. ANALYSIS OF THE POSSIBILITIES OF REDUCTION AND MEASUREMENT OF

CUTTING TOOL VIBRATIONS DURING THE CUTTING PROCESS
Mădălin Tomescu, Lucian Blaga University of Sibiu, Sibiu, ROMANIA

35. RADIATION AND LIGHT - THE INTERACTION OF RADIATION WITH THE

SUBSTANCE
Gîrdu Constantin Cristinel, University Transilvania from Brașov, ROMÂNIA
Mileșan Mihaela, University Transilvania from Brașov, ROMÂNIA
Rădulescu Constanța, University ,,Constantin Brâncuși,, from Târgu-Jiu, ROMÂNIA

17
18