TECHNICAL DATA

Fluke 729 Automatic

Pressure Calibrator

Portable automatic pressure calibrator simplifies

pressure calibration
The Fluke 729 Automatic Pressure Calibrator has been designed
specifically with process technicians in mind to simplify the pres-
sure calibration process and provide faster, more accurate test
results. Technicians know that calibrating pressure can be a time-
consuming task, but the 729 makes it easier than ever with an
internal electric pump that provides automatic pressure generation
and regulation in an in an easy-to-use, rugged, portable package.

The ideal portable pressure calibrator, the 729 allows you to simply
type in a target pressure, and the calibrator will automatically
pump to the desired set-point. Then, internal fine adjustment con-
trol automatically stabilizes the pressure at the requested value.

The Fluke 729 can also automatically test multiple pressure test
points and automatically document the results. Calibration is as
easy as typing in the starting and ending pressure and the number
of test points and tolerance level. The 729 does the rest.

Built-in HART communication capabilities enable HART transmitter

mA adjustments, light HART configuration and the ability to adjust
to applied 0 % and 100 % values.

Upload and manage documented calibration results with DPCTrack2™

Calibration Management Software, making it easy to manage your
instrumentation, create scheduled tests and reports, and manage
calibration data.

With three ranges to choose from, 30 psi (2 bar, 200 kPa), 150 psi
(10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), Fluke 729 Automatic
Pressure Calibrators are designed to perform when and where you
KEY PRESSURE FUNCTIONS: need them.
Pressure sourcing/control and
measurement

KEY ELECTRICAL FUNCTIONS:

mA source, simulate and measure.
Measure mA with 24V loop power.
Measure Vdc and measure temperature
(with optional RTD probe).

FLUKE CONNECT COMPATIBILITY:

With Fluke Connect ® mobile app and
desktop software compatibility, technicians
can wirelessly monitor and log measured
and sourced pressure values.
 Automatic pressure generation and control to 300 psi, (20 bar,
2 MPa). Enter a pressure and the 729 automatically pumps to the
desired pressure. Fill in a test template and the 729 will automati-
cally pump to and document a multiple-point pressure calibration
test.

Easy calibration documentation using defined templates for

transmitters and switches. Type in the starting and ending test
pressures and number of test points. The 729 does the rest by
documenting the applied pressure, measured mA and % error for
each test point. The bright color graphical display will flag out of
tolerance test results in red.

Automatic internal fine pressure adjustment helps compensate

for minor leaks in hoses and test setups. No need to manually turn
a vernier to compensate for leaks helping to eliminate the hassle
of manual pumping and manual fine adjustment of test setups.
Fluke 729 key features: HART communication enables mA output trim, trim to applied
• Automatic pressure generation and values and pressure zero trimming of HART pressure transmit-
regulation to 300 psi ters. You can also do light configuration tasks such as changing a
transmitter tag, measurement units and ranging. Other supported
• Easily document the process using HART commands include setting fixed mA outputs for trouble-
onboard test templates shooting, read device configuration and variables and read device
• Automatic internal fine-pressure diagnostics.
adjustment
Measure mA signals on transmitter outputs, source and
• Measure, source and simulate simulate mA signals for testing I/Ps and other mA loop devices.
4 to 20 mA signals Includes a 24V loop power supply for testing and powering trans-
• 24V loop power for powering mitters in standalone tests disconnected from the control system.
transmitters for tests
Rugged portable design and 3-year warranty set the 729 apart
• Bright dual/triple-channel color from most other pressure calibrators. The 729 is tested and war-
graphical display ranted to withstand a 1-meter drop test so it is ready for field
• HART communication for testing instrumentation calibration work.
HART smart transmitters
Fluke Connect® compatibility enables a user to perform remote
• Built in leak testing for verifying monitoring using the Fluke Connect mobile app and also manage
test setups for leakage and store pressure measurements and logging events. Share mea-
• Rugged portable design with surements using ShareLive™ video calls and emails.
standard 3-year warranty
Measure temperature with optional 720RTD probe for performing
• Fluke Connect App compatibility
®
custody transfer calibrations.
• Measure temperature with optional
720RTD probe Measure pressure with legacy 700 Series and the new 750
Series pressure modules if different pressure measurement ranges
• Measure Vdc for testing 1 V dc to or resolution is desired.
5 V dc output transmitters
• Compatible with 700 Series and Multiple language support, select language from the instrument
750 Series pressure modules setup utility. Hart communication commands are limited to English
per the HART device descriptors and protocol.
• Upload documented test results to
DPCTrack2™ Calibration Management Semi-rigid carrying case designed for field work, with room in
Software the case to store test hoses, fittings, test leads and small hand
• Innovative semi-rigid carrying case tools needed for field pressure calibrations.
designed for field work

2 Fluke Corporation Fluke 729 Automatic Pressure Calibrator

Specifications
Pressure specification*
One-year specification 0.02 % of full scale
Control specification 0.005 % full scale minimum
*See manual for detailed specifications

Model Psi range, resolution Bar range, resolution kPa range, resolution Comment
729 30G -12.0000 to 30.0000 psi -0.82737 to 2.06842 bar -82.737 to 206.843 kPa No wireless communication
729 150G -12.000 to 150.000 psi -0.8273 to 10.3421 bar -82.73 to 1034.21 kPa No wireless communication
729 300G -12.000 to 300.000 psi -0.8273 to 20.6843 bar -82.73 to 2068.43 kPa No wireless communication
729 30G FC -12.0000 to 30.0000 psi -0.82737 to 2.06842 bar -82.737 to 206.843 kPa Wireless communication
for Fluke Connect
729 150G FC -12.000 to 150.000 psi -0.8273 to 10.3421 bar -82.73 to 1034.21 kPa Wireless communication
for Fluke Connect
729 300G FC -12.000 to 300.000 psi -0.8273 to 20.6843 bar -82.73 to 2068.43 kPa Wireless communication
for Fluke Connect
729CN 200K -12.0000 to 30.0000 psi -0.82737 to 2.06842 bar -82.737 to 206.843 kPa For China, no wireless communication
729CN 1M -12.000 to 150.000 psi -0.8273 to 10.3421 bar -82.73 to 1034.21 kPa For China, no wireless communication
729CN 2M -12.000 to 300.000 psi -0.8273 to 20.6843 bar -82.73 to 2068.43 kPa For China, no wireless communication
729CN 200K FC -12.0000 to 30.0000 psi -0.82737 to 2.06842 bar -82.737 to 206.843 kPa For China, wireless communication
for Fluke Connect
729CN 1M FC -12.000 to 150.000 psi -0.8273 to 10.3421 bar -82.73 to 1034.21 kPa For China, wireless communication
for Fluke Connect
729CN 2M FC -12.000 to 300.000 psi -0.8273 to 20.6843 bar -82.73 to 2068.43 kPa For China, wireless communication
for Fluke Connect
729JP 200K N/A N/A -82.737 to 206.843 kPa For Japan, no wireless communication
729JP 1M N/A N/A -82.73 to 1034.21 kPa For Japan, 1 MPa range, no wireless
communication
729JP 2M N/A N/A -82.73 to 2068.43 kPa For Japan, 2 MPa range, no wireless
communication
729JP 200K FC N/A N/A -82.737 to 206.843 kPa For Japan, wireless communication
for Fluke Connect
729JP 1M FC N/A N/A -82.73 to 1034.21 kPa For Japan, wireless communication
for Fluke Connect
729JP 2M FC N/A N/A -82.73 to 2068.43 kPa For Japan, wireless communication
for Fluke Connect
Electrical specification
All specifications are valid to 110 % of range, except 24 mA source and simulate which are valid to 100 % of range.
Ranges
mA measure, source and simulate 0 mA to 24 mA
Volts dc measure 0 V dc to 30 V dc
Resolution
mA dc source, simulate and measure 1 μA
Voltage dc measurement 1 mV
Accuracy 0.01 % ± 2 LSD all ranges (at 23 °C ± 5 °C)
Stability 20 ppm of full scale /°C from -10 °C to +18 °C and 28 °C to +50 °C
Loop compliance voltage 24 V dc @ 20 mA
mA simulate external voltage requirement 12 V dc to 30 V dc
Temperature measurement only/100 Ω Pt(385) -50 °C to 150 °C (-58 °F to 302 °F)
RTD
Temperature resolution 0.01 °C (0.01 °F)
Temperature accuracy ± 0.1 °C (0.2 °F) ± 0.25 °C (± 0.45 °F) combined uncertainty when using 720 RTD probe
(optional accessory)
Drive capability 1200 Ω without HART resistor, 950 Ω with internal HART resistor

3 Fluke Corporation Fluke 729 Automatic Pressure Calibrator

 General specifications
Mechanical specification
Size (HxWxL) 7 cm x 27.94 cm x 17.27 cm (2.75 in x 11 in x 6.8 in)
Weight 6.5 lbs., 2.95 kg
Ingress protection IP54
Environmental specification
Operating temperature -10 °C to 50 °C for measurement, 0 °C to 50 °C for pressure control
Operating temperature with battery -10 °C to 40 °C
Battery will only charge to 40 °C
Storage temperature -20 °C to 60 °C
Operating altitude 3000 m
Storage altitude 13000 m
Wireless (729FC only)
Radio frequency certification FCC ID: T68-FBLE IC:6627A-FBLE
Wireless radio frequency range 2412 MHz to 2462 MHz

Ordering information
Model Description Comment
FLK-729 30G Fluke 729 30G, 30 psi, 2 Bar Automatic Pressure 30 psi, 2 bar range, no wireless communication
Calibrator
FLK-729 150G Fluke 729 150G, 150 psi, 10 Bar Automatic 150 psi, 10 bar range, no wireless communication
Pressure Calibrator
FLK-729 300G Fluke 729 300G, 300 psi, 20 Bar Automatic 300 psi, 20 bar range, no wireless communication
Pressure Calibrator
FLK-729 30G FC Fluke 729 30G FC, 30 psi, 2 Bar Automatic 30 psi, 2 bar range, includes wireless communication for
Pressure Calibrator, with Fluke Connect Fluke Connect
FLK-729 150G FC Fluke 729 150G FC, 150 psi, 10 Bar Automatic 150 psi, 10 bar range, includes wireless communication for
Pressure Calibrator, with Fluke Connect Fluke Connect
FLK-729 300G FC Fluke 729 300G FC, 300 psi, 20 Bar Automatic 300 psi, 20 bar range, includes wireless communication for
Pressure Calibrator, with Fluke Connect Fluke Connect
FLK-729CN 200K Fluke 729CN 200K, 200 kPa Automatic Pressure For China, 200 kPa range, no wireless communication
Calibrator, China
FLK-729CN 1M Fluke 729CN 1M, 1 MPa Automatic Pressure For China, 1 mpa range, no wireless communication
Calibrator, China
FLK-729CN 2M Fluke 729CN 2M, 2 MPa Automatic Pressure For China, 2 MPa range, no wireless communication
Calibrator, China
FLK-729CN 200K FC Fluke 729CN 200K FC, 200 kPa Automated For China, 200 kPa Range, includes wireless communication
Pressure Calibrator, China with Fluke Connect for Fluke Connect
FLK-729CN 1M FC Fluke 729CN 1M FC, 1 MPa Automatic Pressure For China, 1 MPa range, includes wireless communication for
Calibrator, China with Fluke Connect Fluke Connect
FLK-729CN 2M FC Fluke 729CN 2M FC, 2 MPa Automatic Pressure For China, 2 MPa range includes wireless communication for
Calibrator, China with Fluke Connect Fluke Connect
FLK-729JP 200K Fluke 729JP 200K, 200 kPa Automatic Pressure For Japan, 200 kPa Range, no wireless communication
Calibrator, Japan
FLK-729JP 1M Fluke 729JP 1M, 1 MPa Automatic Pressure For Japan, 1 MPa Range, no wireless communication
Calibrator, Japan
FLK-729JP 2M Fluke 729JP 2M, 2 MPa Automatic Pressure For Japan, 2 MPa range, no wireless communication
Calibrator, Japan
FLK-729JP 200K FC Fluke 729JP 200K FC, 200 kPa Automatic Pressure For Japan, 200 kPa range, includes wireless communication for
Calibrator, Japan with Fluke Connect Fluke Connect
FLK-729JP 1M FC Fluke 729JP 1M FC, 1 MPa Automatic Pressure For Japan, 1 MPa range, includes wireless communication for
Calibrator, Japan with Fluke Connect Fluke Connect
FLK-729JP 2M FC Fluke 729JP 2M FC, 2 MPa Automatic Pressure For Japan, 2 MPa range, includes wireless communication for
Calibrator, Japan with Fluke Connect Fluke Connect

4 Fluke Corporation Fluke 729 Automatic Pressure Calibrator

 Ordering information
continued
Wireless versions include:
Calibrator with wireless communication,
soft case, stackable test leads, AC280 hook
clips, alligator clips, test probes, magnetic
hanger kit, carrying strap, wireless adapter,
quick start guide, safety sheet, power supply,
rechargeable battery (installed), hose kit
with push fit adapters, hanging clip, USB Preventive maintenance simplified. Rework eliminated.
cable, 1/8 in FNPT to 1/4 in FNPT adapter,
1/8 in FNPT to F-M20 adapter, 1/8 in FNPT to Save time and improve the reliability of your maintenance data by
1/4 in FBSP adapter, PTFE tape, (2) sintered wirelessly syncing measurements using the Fluke Connect® system.
filters, water trap drain and valve tuning • Eliminate data-entry errors by saving measurements directly from the
hoses. tool and associating them with the work order, report or asset record.
• Maximize uptime and make confident maintenance decisions with data
Versions with no wireless functionality you can trust and trace.
include: • Access baseline, historical and current measurements by asset.
Calibrator without wireless communication, • Move away from clipboards, notebooks and multiple spreadsheets with
soft case, stackable test leads, AC280 hook a wireless one-step measurement transfer.
clips, alligator clips, test probes, magnetic • Share your measurement data using ShareLiveTM video calls and emails.
hanger kit, carrying strap, quick start guide, • Fluke 729 Automatic Pressure Calibrator is part of a growing system of
safety sheet, power supply, rechargeable connected test tools and equipment maintenance software. Visit the
battery (installed), hose kit with push fit website to learn more about the Fluke Connect® system.
adapters, hanging clip, USB cable, 1/8 in Find out more at flukeconnect.com
FNPT to 1/4 in FNPT adapter, 1/8 in FNPT to
F-M20 adapter, 1/8 in FNPT to 1/4 in FBSP
adapter, PTFE tape, (2) sintered filters, water
trap drain and valve tuning hoses.

All trademarks are the property of their respective owners. WiFi or cellular service required to share
data. Smartphone, wireless service and data plan not included with purchase. First 5 GB of storage is
free. Phone support details can be viewed at fluke.com/phones.
Smart phone wireless service and data plan not included with purchase. Fluke Connect
is not available in all countries.

Fluke. Keeping your world up and running.®.

Fluke Corporation For more information call:

PO Box 9090, Everett, WA 98206 U.S.A. In the U.S.A. (800) 443-5853 or
Fluke Europe B.V. Fax (425) 446-5116
PO Box 1186, 5602 BD In Europe/M-East/Africa +31 (0)40 267 5100 or
Eindhoven, The Netherlands Fax +31 (0)40 267 5222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
Modification of this document is not ©2017 Fluke Corporation.
permitted without written permission Specifications subject to change without notice.
from Fluke Corporation. Printed in U.S.A. 3/2017 6008874c-en

5 Fluke Corporation Fluke 729 Automatic Pressure Calibrator