Scribd
Upload
238 views5 pages

802D SL Encoder Configuration

Uploaded by

Baldev Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
238 views5 pages

802D SL Encoder Configuration

Uploaded by

Baldev Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 5
Commissioning the drives via HIM! 70.8 Coniguration - Power unils, encoders and motors 10.8.1 Configuration - Encoders. Operating sequence [Enoner lia Figure 10-22. Confguration - encader g Use the arrow keys and the button’ or selecting the encoder assignment using the dummy location Note You can find the encoder interface and component rumber assignment for the current encode in the topelogy overvie > Ne Ifthe cursor 's on "Encoder 1", you can on to configure themoter encoder with "> Next Toning min, 2 porating Inseuctions, 08:20 oop 19.88%0 307 Commissioning the arives via Hitt 70.8 Configuration - Power urils, eACOdaIS and mOIOTS Figure 10-23 Encoder selectan The moter data set forthe first encoder is recognized {"known’), The encoder data are displayed. > Ifthe curser is on "Encoder 2" or "Switch LED of sensor moduleto flash for recognition’, you Next can go on te configure the secend encoder with ">> Next" Note The ste selow explain how to commission 2 second encoder “Another window opens for configuring the selected second encoder Tusning, miliog rinsing, bing 308 (SperatingInstuntions,06:2009, 6FO5397-00P 10.6680 Commissioning the drives via HIM! 70.8 Coniguration - Power unils, encoders and motors LO Figure 10-25 Encoder data message Press "OK" to confirm the message. Note Ifa second encoder is used, the following must be taken into consideration during fkst ‘commisstoning ‘The encoder data set (EDS) for he second encoder is preassigned with the first encoders encoder data set In this case, you can identiy the encoder data ofthe second excoder using the "Type softkey Tine Press "Type" (see screenshot below Ne L_| Figure 10-26 Encoder type Toming, mln, ging, being porating nsvuctns, 0612008, 6FO5387-0CP 10-6680 Commissioning the arives via Hitt 70.8 Configuration - Power urils, eACOdaIS and mOIOTS > Next Eateoe lan 310 If no encoder is identfied {value "O"), you have the following options! 1. You can select an existing encoder trom thelist Cliok ">> Next to confirn your selection 2. Select the box "User-defined" (see screenshot below} Figure 10-27 “User-defined selecten You can configure this encoder in the "Configuration - encoder’ window (see screenshot below) Ifthe configuration is not yet complete, new values can be entered You can use the "Configuration" softkey to configure the encoder via parameter “p0404" bit- by-bil (see screenshot below) Tusning, miliog rinsing, bing (SperatingInstuntions,06:2009, 6FO5397-00P 10.6680 Commissioning the drives via HIM! 70.8 Coniguration - Power unils, encoders and motors a Figure 10-29 Bit-by-bit configuration Fae cross"Save te save tho configuration x Press"Canceto ext he confgaton and rtum othe season mer i,t ho. porating nsvuctns, 0612008, 6FO5387-0CP 10-6680 st

You might also like