Scribd Logo
Upload

Welcome to Scribd!

  • 225 views

    ASTM A554 Ek Syf

    Uploaded by

    ALİ YİĞİT
    This document outlines the chemical requirements and dimensional tolerances for six types of welded stainless steel mechanical tubing according to the ASTM A554-03 specification. It provides the maximum allowable percentages for various chemical elements in 304, 304L, 309S, 316, 316L, and 321 stainless steel grades. It also specifies tolerances for dimensions like outside diameter, squareness, straightness, weld height, and wall thickness for tubing sizes ranging from 1 to 4 inches. Mechanical testing requirements from ASTM and United Standards are included for tests like flaring and eddy current inspection.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ASTM A554 Ek Syf

    Uploaded by

    ALİ YİĞİT
    225 views1 page
    This document outlines the chemical requirements and dimensional tolerances for six types of welded stainless steel mechanical tubing according to the ASTM A554-03 specification. It provides the maximum allowable percentages for various chemical elements in 304, 304L, 309S, 316, 316L, and 321 stainless steel grades. It also specifies tolerances for dimensions like outside diameter, squareness, straightness, weld height, and wall thickness for tubing sizes ranging from 1 to 4 inches. Mechanical testing requirements from ASTM and United Standards are included for tests like flaring and eddy current inspection.

    Original Description:

    Specification for Welded Stainless Steel Mechanical Tubing

    Original Title

    ASTM A554 Ek syf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines the chemical requirements and dimensional tolerances for six types of welded stainless steel mechanical tubing according to the ASTM A554-03 specification. It provides the maximum allowable percentages for various chemical elements in 304, 304L, 309S, 316, 316L, and 321 stainless steel grades. It also specifies tolerances for dimensions like outside diameter, squareness, straightness, weld height, and wall thickness for tubing sizes ranging from 1 to 4 inches. Mechanical testing requirements from ASTM and United Standards are included for tests like flaring and eddy current inspection.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    225 views1 page

    ASTM A554 Ek Syf

    Uploaded by

    ALİ YİĞİT
    This document outlines the chemical requirements and dimensional tolerances for six types of welded stainless steel mechanical tubing according to the ASTM A554-03 specification. It provides the maximum allowable percentages for various chemical elements in 304, 304L, 309S, 316, 316L, and 321 stainless steel grades. It also specifies tolerances for dimensions like outside diameter, squareness, straightness, weld height, and wall thickness for tubing sizes ranging from 1 to 4 inches. Mechanical testing requirements from ASTM and United Standards are included for tests like flaring and eddy current inspection.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Not For Production Use (For Reference Only)

    ASTM A554-03
    Specification for Welded Stainless Steel Mechanical Tubing
    Reapproved 1995

    ASTM Chemical Requirements


    304 304L 309S 316 316L 321
    Elements
    (C) Carbon, max 0.08 0.035 0.08 0.08 0.035 0.08
    (Mn) Manganese, max 2.00 2.00 2.00 2.00 2.00 2.00
    (P) Phosphorus, max 0.040 0.040 0.040 0.040 0.045 0.045
    (S) Sulfur, max 0.030 0.030 0.030 0.030 0.030 0.030
    (Si) Silicon 1.00 1.00 1.00 1.00 1.00 1.00
    (Ni) Nickel 8.0-11.0 8.0-13.0 12.0-15.0 10.0-14.0 10.0-15.0 9.0-13.0
    (Cr) Chromium 18.0-20.0 18.0-20.0 22.0-24.0 16.0-18.0 16.0-18.0 17.0-20.0
    (Mo) Molybdenum N/A N/A N/A 2.0-3.0 2.0-3.0 N/A
    (Ti) Titanium N/A N/A N/A N/A N/A 5xC - 0.060

    Mechanical Testing Test Length Requirements*


    Test ASTM United
    Flare Not Required Required Cut Length O.D. ASTM United
    Flatten Not Required Required Up to 4', incl. Up to 2", incl. -0 +1/16 -0 +1/16
    Eddy Current Not Required Required Over 2" tp 4" incl. -0 +3/32 -0 +3/32

    Over 4' to 10' incl. Up to 2", incl. -0 +3/32 -0 +3/32


    Over 2" -0 +1/8 -0 +1/8

    Over 10' to 24', incl. All sized -0 +3/16 -0 +3/16

    * For lengths over 24', add a tolerance of 1/8" for each 10', or fraction thereof, up to maximum of 1/2".

    Dimensional Requirements
    Outside Diameter Squareness Straightness Weld Height** Wall
    Size ASTM United ASTM United ASTM United ASTM United ASTM United

    1" +/- .005 +/- .005 N/A .020 .030/36" .030/36" .005 .005 +/- 10% +/- 10%
    1-1/2" +/- .006 +/- .006 N/A .025 .030/36" .030/36" .005 .005 +/- 10% +/- 10%
    2" +/- .007 +/- .007 N/A .035 .030/36" .030/36" .005 .005 +/- 10% +/- 10%
    2-1/2" +/- .010 +/- .010 N/A .040 .030/36" .030/36" .005 .005 +/- 10% +/- 10%
    3" +/- .010 +/- .010 N/A .045 .030/36" .030/36" .005 .005 +/- 10% +/- 10%
    3-1/2" +/- .015 +/- .015 N/A .045 .030/36" .030/36" .005 .005 +/- 10% +/- 10%
    4" +/- .015 +/- .015 N/A .045 .030/36" .030/36" .005 .005 +/- 10% +/- 10%
    (See ASTM A554 6.2.2 for var.)
    ** Weld Height is .005" or 15% of wall thickness, whichever is greater.

    OP-05-01-F ISSUE: 02/26/97 REV: 05/23/05 ref: 2005 ASTM Standard Vol. 01.01

    You might also like