Scribd
Upload
45 views1 page

Vertical Wall - Vertical Rein. Min % Thickness/2 Steel Through

The document provides specifications for reinforcing steel in three structural elements: a vertical wall, horizontal wall reinforcing, and a base. For each element, it lists the minimum steel requirements and thickness at different depths, the amount of steel provided, and the spacing of steel bars. The total amount of steel provided is calculated for each structural component.

Uploaded by

sameer mistry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
45 views1 page

Vertical Wall - Vertical Rein. Min % Thickness/2 Steel Through

The document provides specifications for reinforcing steel in three structural elements: a vertical wall, horizontal wall reinforcing, and a base. For each element, it lists the minimum steel requirements and thickness at different depths, the amount of steel provided, and the spacing of steel bars. The total amount of steel provided is calculated for each structural component.

Uploaded by

sameer mistry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

VERTICAL WALL - VERTICAL REIN.

Min % Thickness/2 Steel Provide 8 F 115 c/c THROUGH


0.350 213 mm Ast = 743.8 mm2/m
0.350 100 mm Ast = 350.0 mm2/m Area of steel provided, Astp 437 mm2
0.350 188 mm Ast = 656.3 mm2/m
0.350 0 mm Ast = 0.0 mm2/m Provide 10 F 150 c/c EXTRA
Total 1750.0
Area of steel provided, Astp 523 mm2

Total 960

VERTICAL WALL - HORIZONTAL REIN.

Min % Thickness/2 Steel Provide 10 F 120 c/c UPPER


0.240 133 mm Ast = 319.2 mm2/m
0.240 150 mm Ast = 360.0 mm2/m Area of steel provided, Astp 654 mm2
0.000 0 mm Ast = 0.0 mm2/m
0.000 0 mm Ast = 0.0 mm2/m Provide 12 F 165 c/c LOWER
Total 679.2
Area of steel provided, Astp 685 mm2

1339
BASE

Min % Thickness/2 Steel Provide 12 F 140 c/c THROUGH


0.350 225 mm Ast = 787.5 mm2/m
0.350 100 mm Ast = 350.0 mm2/m Area of steel provided, Astp 807 mm2
0.350 0 mm Ast = 0.0 mm2/m
0.350 0 mm Ast = 0.0 mm2/m Provide 8 F 200 c/c EXTRA
Total 1137.5
Area of steel provided, Astp 251 mm2

Total 1059

You might also like