ElsaWin Installation Instructions
Instructions for update
installation of ElsaWin 5.10
Page 1 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
Contents
1. Requirements .................................................................................................................. 3
2. Updating to version 5.10 .................................................................................................. 4
3. Client update .................................................................................................................. 15
Page 2 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
1. Requirements
ElsaWin 5.00 must be installed.
In addition, the following programs must be installed on the server
before ElsaWin can be updated to version 5.10:
1. Microsoft Installer MSI 4.5 (or higher)
2. Microsoft .Net 3.5 SP1 (or higher)
3. Microsoft Power Shell 1.0 (or higher)
Note: Please ensure that all clients are logged off the server during the
installations.
Only the system administrator can perform the installation.
Before starting the installation, log on to your ElsaWin server
(standalone devices, e.g. VAS diagnostic tester) with your
administrator authorisation.
Please close all applications (server and connected clients) and restart
the server.
When installing the program on Windows 7 or Windows Server
2008 R2 operating systems, the option "Run as administrator"
must be activated when starting the installation program.
Please observe the supplementary instructions "Installing Adobe
SVG plugin with Windows 7".
The update can take significantly longer if any anti-virus software is
active.
Page 3 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
2. Updating to version 5.10
Please log on to the server with your administrator authorisation.
Insert the "ElsaWin disk1_upd" disc into the CD drive and perform the following steps:
Open the Windows Explorer.
Select your CD drive in the Explorer tree on the left side.
In the right window of the Explorer, double click on Elsa_51_Upd_Setup.exe to start the program.
When installing the program on Windows 7 or Windows Server 2008 R2
operating systems, the option "Run as administrator" must be activated when
starting the installation program.
Open the Windows Explorer.
Select "R:\Elsa_51_Upd_Setup.exe". Right click on "Run as administrator".
Note:
An installation in silent mode can be started with the command prompt option /S. The
options /s, -S, and -s. are also possible.
Page 4 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
When all software requirements for the ElsaWin installation have been met, the following dialog box will
appear:
Click on "Next".
Page 5 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
Select the desired
reference medium.
Choose whether or not
the BB gate service
should be installed
Choose the folder in
which BB gate should
be installed
The IP address (DNS
alias) and port number
of the DMS backbone
will be displayed.
Please ask support
before changing this
value.
If necessary, change
the default installation
folder for the Microsoft
SQL Server instance.
Then click on "Next".
Page 6 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
Click on "Next".
Page 7 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
The previous installation
folder is used as the
destination folder. Only
change the destination
folder after consultation
with the support services
Click on "Next".
Page 8 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
Click on "Next".
Page 9 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
Click on "Install".
Page 10 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
Click on "Next".
Page 11 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
If the ElsaWin program installation can be completed without restarting the ElsaWin server computer, the
following window will appear:
Click on "Finish".
If the ElsaWin program installation requires you to restart the ElsaWin server computer, the following window
will appear:
Page 12 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
Choose when you want
to restart.
Click on "Finish".
If you restart the ElsaWin server computer later, you will have to log in again as administrator so that the
ElsaWin setup program can configure the remaining settings after the restart.
If you have also installed the BB gate service, check whether the following service exists in the DMS
Backbone.
Open the Internet Explorer and go to http://lpnbb:81. Call up the services from there. For DMSBB 4.x you will
have to log in first.
Page 13 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
If the service "OrderService" is shown, you have completed the ElsaWin 5.10 update.
If the service "OrderService" is not listed in the DMS Backbone, you must create it as follows.
Right click on Start and open the Explorer.
In My Computer > Appl (D): > srv_apps > bbgate, you will find the file "dmsbb_config_OrderService.cmd".
Start it with a double-click.
After running the file successfully, please check again whether the service is listed in the DMS Backbone.
Page 14 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
3. Client update
After completion of the server installation, the client update will automatically begin when a connected
ElsaWin client program is started.
When installing the program on Windows 7 or Windows Server 2008 R2 operating systems, the
installation program requires local administrator rights.
Click on "OK".
Select the language for
the installation.
Click on "OK".
Page 15 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
Please close all other
programs and click on
"Next"
Your configuration will be shown once more in the following window.
Click on "Install".
The copying process will then be started.
Page 16 of 17
Update_ELSA_510_en Version: 1.5
ElsaWin Installation Instructions
Click on "Next".
Click on "Finish".
The client update has been completed.
Page 17 of 17
Update_ELSA_510_en Version: 1.5
