Scribd
Upload
69 views8 pages

Gyroscope Data Logger

This document summarizes a gyroscope data logger. [1] It uses sensors to measure physical parameters like load, deflection, and angle, which are connected to a microcontroller data logger unit. [2] The data logger records the sensor measurements over time and sends the data to a PC via serial communication. [3] The PC uses LabVIEW software to manipulate the data, display graphs of RPM and deflection measurements, and store the results in an Excel spreadsheet.

Uploaded by

Jagdish Rajan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views8 pages

Gyroscope Data Logger

This document summarizes a gyroscope data logger. [1] It uses sensors to measure physical parameters like load, deflection, and angle, which are connected to a microcontroller data logger unit. [2] The data logger records the sensor measurements over time and sends the data to a PC via serial communication. [3] The PC uses LabVIEW software to manipulate the data, display graphs of RPM and deflection measurements, and store the results in an Excel spreadsheet.

Uploaded by

Jagdish Rajan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

TM

GYROSCOPE DATA LOGGER

Product Category DYNAMICS Code No: BSPIL-DYN-DLMICSOF

Product Photos

GYROSCOPE DATA LOGGER

INTRODUCTION

What is a data logger? General application

A data logger is an electronic instrument that records information over a period of time
for later use. The type of information recorded is determined by the user. For the
purposes here, we will limit the discussion to physical parameters such as temperature,
relative humidity, pressure, voltage, water level, etc.

SENSOR1

MICROCO
NTROLLER

SENSOR2 [DATA
LOGGER]

SENSOR3

SENSORS

In this sensors are used to measure the real physical parameters like load, deflection
and etc. A sensor is a device that measures a physical quantity and converts it into a
signal which can be read by an observer or by an instrument.
DATA LOGGER

In this data logger we used microcontroller to monitoring the physical quantity with the
help of sensors and data are given to PC through serial communication with the help of
programs

PC

In this pc side we are using lab view. The data are received by serially from data logger
unit and manipulated gaffes and Excel sheet

ANGLE
ROTARY ENCODER

SERIES : SHAFT TYPE TO MOUNTED AT THE SIDE

SHAFT DIA: 8MM

OUTPUT PHASE: 3: A,B,C

OUTPUT: NPN OPEN COLLECTOR OUTPUT

POWER SUPPLY: 12-24VDC

A rotary encoder, also called a shaft encoder, is an electro-mechanical device that converts the
angular position of a shaft or axle to an analog or digital code, making it an angle transducer.
Rotary encoders are used in many applications that require precise shaft unlimited rotation—
including industrial controls, robotics, special purpose photographic lenses[1], computer input
devices (such as opt mechanical mice and trackballs), and rotating radar platforms.

Standard Binary Encoding

Sector Contact 1 Contact 2 Contact 3 Angle

1 off off off 0° to 45°

2 off off ON 45° to 90°

3 off ON off 90° to 135°

4 off ON ON 135° to 180°

5 ON off off 180° to 225°

6 ON off ON 225° to 270°

7 ON ON off 270° to 315°

8 ON ON ON 315° to 360°

Two square waves in quadrature (clockwise rotation)


load measurements

Load measurement is stainless steel round-type load cell which can be used either in tension or
compression.

In put voltage- 5vDC

Electrical connections- 4 wires

Load capacity-1 to 10kg

RPM measurement unit :-

Proximity Sensor (RPM Measurement)

In this system we have 5 to 30v NPN proximity sensors for measuring RPM of the
motor. The sensor output is connected to the data logger.
Specifications:-
Input voltage: 5VDC

Electrical connections- Type 3 wire connection

Output: DC pulse wave form out put

DATA LOGGER

A data logger (also data logger or data recorder) is an electronic device that records
data over time or in relation to location either with a built in instrument or sensor or via
external instruments and sensors.

In this data logger microcontroller is used to measuring quantity of RPM and deflection
through sensors. In this microcontroller we had developing the program for related
application. Input voltage of microcontroller is 5VDC and 20MHZ 40pin dip package

DATA LOGGER

A data logger (also data logger or data recorder) is an electronic device that records
data over time or in relation to location either with a built in instrument or sensor or via
external instruments and sensors.

In this data logger microcontroller is used to measuring quantity of load and deflection
through sensors. In this microcontroller we had developing the program for related
application.

Input voltage of microcontroller is 5VDC and 20MHZ 40pin dip package


Front panel

Back panel

Software

MPLAB id is used to developing the algorithm of embedded.

In this data logger unit 3 9pin connector are used for

1. RPMsensor with 9 pin connector

2. LOAD sensor with 9 pin connector


1. ANGLE sensor with 9 pin connector

2. serial cable to pc with 9 pin connector

Connector 1

The first connector is used for RPM to measure deflection

The sensor outputs are connecting to the microcontroller through 9pin connector. The RPM
sensor having three wires and the input voltage is 5VDC

The load and displacement are monitored by microcontroller and the


data are sent to the PC with the help of max232 and RS232 (9pin con).
The displacement is 1mm to 75mm.

Connector2

The second connector is used to connect S type load sensors

Connector3

The second connector is used to connectANGLE sensors

Connector4

The third connector is used to connect the PC via serial port and the data are sent through
serial cable to PC

PC SOFTWARES

In this section the data are received by serially. And then data’s are manipulated by
software of lab view and Forming graph with the help of RPM and deflection data’s. And
the data are stored in excel sheet.
Front panel with calibration

The data are stored into grid and all so stored into excel sheet. In this received
deflection data’s and RPM data’s are manipulated and answer stored in grid. We all so
take the print grid and graph.

TM
B.S.PYROMATIC INDIA (P) LTD.,
AN ISO 9001- 2000 CERTIFIED COMPANY
P.B.No.6033,27/1,XII Avenue,
Ashok Nagar,Chennai-600 083.INDIA.
Phone : 091-44-24890009 / 24890710. Fax: 091-44-24897880

You might also like