0% found this document useful (0 votes)
174 views2 pages

(Silicon) : N Channel Junction Field Effect Transistors

These are specifications for three depletion mode N-channel junction field-effect transistors (JFETs) - the 2N5668, 2N5669, and 2N5670. They are designed for VHF amplifier and mixer applications with low distortion, interchangeable drain and source, and low noise figure down to 2.5 dB maximum at 100 MHz. The document provides maximum ratings, typical electrical characteristics like transconductance and capacitance, and a diagram of the transistor package.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
174 views2 pages

(Silicon) : N Channel Junction Field Effect Transistors

These are specifications for three depletion mode N-channel junction field-effect transistors (JFETs) - the 2N5668, 2N5669, and 2N5670. They are designed for VHF amplifier and mixer applications with low distortion, interchangeable drain and source, and low noise figure down to 2.5 dB maximum at 100 MHz. The document provides maximum ratings, typical electrical characteristics like transconductance and capacitance, and a diagram of the transistor package.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

2N5668 (SILICON)

2N5669
2N5670

N·CHANNEL
JUNCTION FIELD·EFFECT
SILICON N·CHANNEL TRANSISTORS
JUNCTION FIELD·EFFECT TRANSISTORS
(Type A)

Depletion Mode (TypeA) Junction F ield-EffectTransistors designed


for VHF amplifier and mixer applications.

• Low Cross Modulation and Intermodulation Distortion

• Drain and Source Interchangeable

• Low 100-MHz Noise Figure -


NF = 2.5 dB (Max)

• Low Reverse Transfer and Input Capcitances-


Crss = 1.0 pF (Typ); Ciss = 4.7 pF (Typ)
• High Maximum Stable Gain Due to Drain and Gate Lead Separation

*MAXIMUM RATINGS
Rating Svmbol Value Unit
Drain-Source Voltage VOS 25 Vde

·Drain-Gate Voltage VOG 25 Vdc


*Reverse Gate-SOu~ce Voltage VGSR 25 Vdc
·Forward Gate Current IGF 10 mAde
Drain Current 10 20 mAde
*Total Device Dissipation@TA = 250 C Po '" 310 mW
Derate above 2SoC 2.82 mW/oC
·Storage Temperature Range Tstg III -65 to +150 °c
-Indicates JEDEC Registered Data.
STYLE 5'
(11 Continuous package improvements have enhanced these guaranteed Maximum Ratings as PIN 1. DRAIN
follows' Po = 1.0 W @TC "" 25°C, Derate above 25°C - B,O mW~C, T J "" -65 to +150 o C, 1 SOURCE
8 JC '" 125 0 C/W. 3. GATE
MILLIMETERS INCHES
DIM MIN MAX MIN MAX
A 4450 5.100 0.175 0.205
B 3.18 4.1 0 0.125 0.165
C 4.310 5.330 0170 0.110
D 0.407 0.533 0.016 0.011
F O. 07 0.481 D.ul. 0.019
-
L 1.150 1.3!/0 0.045 0.055
N 1.270 - 0.050
P 6.350 0.150 -
a 3.430 0.135 -
R 1.410 2.670 0.095 0.105
S 1.030 2.670 0.080 0.105

CASE 29.(J2
TO-92

2·241
2N5668, 2N5669, 2N5670 (continued)
ELECTRICAL CHARACTERISTICS ITA = 25°C unless otherwise noted}
I Characteristic I Symbol Min Typ Max Unit

'OFF CHARACTERISTICS
Gate~Source Breakdown Voltage V(BR)GSS 25 - - Vde
IIG = 10 /JAde, VOS = 0)
Gate-Source Cutall Voltage VGS(off) Vde
(VOS = 15 Vde, 10 = 10 nAde) 2N5668 0.2 - 4.0
2N5669 1.0 - 6.0
2N5670 2.0 - 8.0
Gate Reverse Current IGSS
(VGS = -15 Vdc, VOS = 0) - - 2.0 nAde
(VGS = -15 Vde, VOS = 0, TA = l00a C) - - 2.0 I'Ade

'ON CHARACTERISTICS
Zero-Gate Voltage Drain Current (Note 11 lOSS mAde
(VOS = 15 Vde. VGS = 0) 2N5668 1.0 - 5.0
2N5669 4.0 - 10
2N5670 8.0 - 20

SMALL-SIGNAL CHARACTERISTICS
* Forward Transadmittance IYfsl ,umhos
(VOS = 15 Vde. VGS = 0, f = 1.0 kHz) 2N5668 1500 - 6500
2N5669 2000 - 6500
2N5670 3000 - 7500

* Forward Transconductance Re(Yls) ,umhos


(VOS = 15 Vde. VGS = O. I = 100 MHz) 2N5668 1000 - -
2N5669 1600 - -
2N5670 2500 - -
·Output Admittance IYasl ",mhos
(VOS= 15Vde. VGS=O,f= 1.0kHz) 2N5668 - - 20
2N5669 - - 50
2N5670 - - 75

·Output Conductance R'(Yas) Ilmhos


(VOS = 15 Vde, VGS = O. I = 100 MHz) 2N5668 - 10 50
2N5669 - 25 100
2N5670 - 35 150

*Input Conductance Re(Yis) - 125 800 ",mhos


(VOS = 15 Vde. VGS = O. I = 100 MHz)
* Input Capacitance Ciss - 4.7 7.0 pF
(VOS = 15 Vde, VGS = 0, f = 1.0 MHz)
* Reverse Transfer Capacitance Crss - 1.0 3.0 pF
(VOS = 15 Vde. VGS = O. f = 1.0 MHz)
Output Capacitance Coss - 1.4 4.0 pF
(VOS = 15 Vde. VGS = O. f = 1.0 MHz)
'Cammon Source Noise Figure (Figure 1) NF d8
(VOS = 15 Vde. VGS = 0, f = 100 MHz, at RG' = 1.0 k ohm) - - 2.5

Power Gain (Figure 1) Gps 16 - - d8


(VOS = 15 Vde. VGS = O. I = 100 MHz)

"Indicates JEDE,C Registered Data. excluding typical values.


Note 1: Pulse Test: Pulse With ::= 100 ms, Duty Cycle.s; 10%.

FIGURE 1 - 100 MHz, POWER GAIN AND NOISE FIGURE TEST CI RCUIT
L3

L1
RL'-SOOhms

Rs"500hms
11

T-'" LI "'S 5 TUrrls 0' 114AW1311nned Copper,Qla ... 3/8","'09" lony


0.01 $IF

L3'" 17 turns of 128 AWG Enameled


CopperW.re, Close Wound on 9/32"
Tappedat",Z·1/2TurIls(adjusttogive RG = \Okohm\,
Parallel ReSIstance = 40 kolims,tunes al",aOpF Ceramic Form, TuningProYldedbva
lZ", 135TurllSI16AWG Tmned Copper, DIB "'3/S",,,,12"long Powdered Iron Slug
Tapped at '" 5 Turns, Parallet RUlstance= 40 kohms,
tUllIlSat",40pF

2-242

You might also like