Scribd
Upload
441 views2 pages

Syllabus Power Electronics

This document outlines the objectives and content of a course on power electronics. The course will cover thyristors and their characteristics including SCRs, GTOs, DIACs and TRIACs. It will examine thyristor switching and triggering circuits. The course will also cover thyristor commutation techniques including self-commutation and auxiliary commutation. Phase control techniques for half-wave and full-wave rectifiers will be studied. Other topics will include choppers, cycloconverters, inverters, and the characteristics of various power semiconductor devices. Recommended textbooks are provided.

Uploaded by

prabhjot singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
441 views2 pages

Syllabus Power Electronics

This document outlines the objectives and content of a course on power electronics. The course will cover thyristors and their characteristics including SCRs, GTOs, DIACs and TRIACs. It will examine thyristor switching and triggering circuits. The course will also cover thyristor commutation techniques including self-commutation and auxiliary commutation. Phase control techniques for half-wave and full-wave rectifiers will be studied. Other topics will include choppers, cycloconverters, inverters, and the characteristics of various power semiconductor devices. Recommended textbooks are provided.

Uploaded by

prabhjot singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

POWER ELECTRONICS

(ACEE-16504)

Objectives: 1. Understand the importance of power electronics and its application.


2. Identify/mitigate the problems and find ways to solve them using power
electronics.
3. Understand the operation, function and interaction between various components
and subsystems used in power electronics converter.
4. Apply the knowledge gained for their project work.
5. Understand, analyze, design, model and synthesize power converter based
systems used for conversion of electric energy.

Part-I
Thyristors and their characteristics: Introduction to Thyristor family, V-I
characteristics of silicon- controlled rectifier (SCR), gate turn-off thyristor (GTO),
Bidirectional diode for alternating current (DIAC) and Bidirectional, Triode for
Alternating Current (TRIAC). Principle of operation of silicon-controlled rectifier
(SCR). Two transistor analogy. Turn on methods of a thyristor Switching
characteristics of thyristors during tum-on and turn-off. Gate characteristics. Firing
of thyristors. Gate triggering circuits. Series and parallel operation of silicon-
controlled rectifiers (SCR) and their triggering circuits. Thyristor specifications;
such as latching current and holding current, critical rate of rise of off-state voltage
(dv/dt) and critical rate of rise of on-state current (di/dt) etc. Protection of SCR from
over voltage and over current. Snubber circuits. Power dissipation.

Part-II
Thyristor commutation techniques: Self commutation by resonating the load
(Class A), Self commutation by LC circuit (class B), Complementary commutation
(class C), Auxiliary commutation (class D), External pulse commutation (class E),
AC Line commutation (class F).
Phase controlled techniques: Introduction to phase angle control. Single phase half
wave controlled rectifiers. Single phase half controlled and full controlled bridge
rectifiers. Three phase full controlled bridge rectifiers. Effect of resistive, inductive
and resistive cum inductive loads. Basic circuit and principle of operation of Dual
Converter, circulating current mode and non-circulating current mode of operation.
Applications of rectifiers and dual converters to speed control of DC motor drives.

Part-III
Choppers: Introduction of chopper, Basic chopper classification, Basic chopper
operations. Control strategies, Chopper configuration, voltage commutated chopper,
Current commutated chopper, Load commutated chopper. Cycloconverters: Basic
principle of operation, Single phase to. single phase cycloconverter. Three phase half
wave cycloconverter. Advantages disadvantages of cycloconverters.

Part-IV
Inverters: Introduction & Classification of inverter. Operating principle, Single
phase half bridge voltage source inverters, Single phase full bridge inverter.
Modified McMurray half-bridge and full-bridge inverter. Three-phase bridge
inverter. Voltage control (Pulse-width modulation (PWM) control etc.) and
reduction of harmonics in the inverter output voltage. Series inverter.
Symbols and V-I characteristics of Silicon Unilateral Switch (SUS), Silicon
Controlled Switch (SCS), Silicon Bilateral Switch (SBS), Unijunction Transistor
(UJT), Programmable Unijunction Transistor (PUT), Light-activated silicon-
controlled rectifier (LASCR), Reverse conducting Thyristors (RCT), Static
Induction Thyristor (SITH), N- Metal Oxide Semiconductor Controlled Thyristor
(N-MCT), Field Controlled Thyristors (FCT).
BOOKS RECOMMENDED: 1. Bimbhra, P.S., Power Electronics, Khanna
Publishers.
2. Singh M.D. and Khanchandani K.B., Power Electronics, Tata Mc Graw Hill
Publishing company limited.
3. Rashid M.H., Power Electronics, Circuits Devices and Applications, Prentice Hall
(India)
4. Sen, P.C., Power Electronics, Tata McGraw Hill Publishing Company limited.
5. Bhattacharya S.K. and Chatterji, S. Industrial Electronics and Control, by New Age
international Publications(P) Ltd, New Delhi.

You might also like