Pasolink Network Management System

Installation Training Manual

 Requirements
Windows Server Requirement
To use PNMSj Server on the Windows OS, RAM and HDD device require the
enumerated capacity in the following tables.

*1 „ Base NE point” is not the real number of NEs. Base NE calculation is explained later
on.
*2 HDD capacity is the free space assigned to the directory wherein log files of PNMSj are
stored (for 90 days max.). The default path is „C:\PNMSj”.
*3 2GB is reserved for OS.
Windows Client Requirement
To use PNMSj Client on the Windows OS, RAM and HDD device require the
enumerated capacity in the following tables.

*1 „ Base NE point” is not the real number of NEs. Base NE calculation is explained later
on.
 Base NE point calculation

“Base NE Point” = “number of NE of type A” * “coefficient of type A” + “number of NE of

type B” * “coefficient of type B” + “number of NE of type C” * “coefficient of type C”+ ...
e.g.) in case of using 1,000 NE (V4), 2,000 NE (NEO STD), 1000 NE (Ipasolink 200)
and 50 NE (5000S). “Base NE Point” = (1,000 * 1) + (2,000 * 1) + (1000 * 1) + (50 *
80) = 8,000
 Java heap memory configuration

*1: The default path is “C:\PNMSj\bin”.

*2 „ Base NE point” is not the real number of NEs. Base NE calculation was
explained on a previous slide
Part 1-A: PNMSj Server
Software Installation
 HTTP Server
Installation
(Windows Server 2008,
Windows Server 2008 R2,
Windows Server 2012 R2)
File sharing setup
 Server: PNMSj Installation Flow
Windows Server 2003/ Windows XP, HTTP server

(1) SERVER LAN SETUP SERVER DIALUP SETUP

REMOVE OR DISABLE
(2) WINDOWS® SNMP
SERVICE

INSTALL PNMSJ
(3) SOFTWARE

(4) LAUNCH PNMSJ

(END OF INSTALL)
 Server: PNMSj Software Installation

 Secure the appropriate software and installation

manual according to Operating system (Win2K, XP or
Solaris)
 Setup the LAN Settings of the server.
 Set the IP address. (DHCP is not supported)
 Set the default gateway.
 Disable the firewall setting.
 Remove and stop Windows SNMP service.
 Remove the SNMP from Windows component.
 Stop the SNMP service and set to “Manual” startup.
 Install PNMSj software
Step1: Server LAN Setup
 Server: (1) Server LAN Setup – IP setting

SELECT INTERNET
PROTOCOL
(TCP/IP)

OPEN THE LOCAL

AREA NETWORK
PROPERTIES SET THE (1) IP
ADDRESS, (2)
SUBNETMASK, (3)
AND DEFAULT
GATEWAY
 Server: (1) Server LAN Setup - Others
GO TO AUTHENTICATION
TAB
GO TO ADVANCED
TAB

CONT…

DISABLE THE
WINDOWS FIREWALL
 Step2: Remove/Disable
Windows® SNMP Service
 Server: (2) Remove Windows® SNMP Service

OPEN CONTROL PANEL AND

THEN ADD OR REMOVE
PROGRAM WINDOW.

SELECT MANAGEMENT
MONITORING TOOLS
CLICK ON DETAILS
BUTTON ANG UNCHECK
SNMP FROM THE LIST.
 Server: (2) Disable Windows® SNMP Service
OPEN CONTROL PANEL AND
THEN ADMINISTRATIVE TOOLS
WINDOW.

STOP SNMP
SERVICE AND
SET IT TO
MANUAL
STARTUP
Step3: Install PNMSj Software
 Server: (3) Install PNMSj Software
INSERT PNMSJ INSTALL
INSTALLSHIELD WIZARD
CDROM AND CLICK ON
setupwin32.exe.

CLICK ON NEXT BUTTON

ON THE ENSUING
WINDOW TO CONTINUE.
 Server: (3) Install PNMSj Software
ENTER THE DIRECTORY
WHERE THE PNMSJ
SOFTWARE WILL BE
INSTALLED.

ENTER THE LICENSE KEY

FILE. THE LICENSE KEY
FILE DETERMINES THE
EQUIPMENT TYPE
SUPPORTED AND
OPTIONAL FUNCTIONS
(EX. UPPER SNMP, SQL
INTFC, ETC)
 Server: (3) Install PNMSj Software

VERIFY THE
INSTALLATION
SETTINGS AND
CLICK ON INSTALL
TO PROCEED WITH
THE INSTALLATION
OF THE SOFTWARE
Part 1-B: PNMSj Server Setting
 Server: PNMSj Server Setting
Secure the appropriate server setting manual
according to Operating system (Win2K, XP or
Solaris)
IIS setting
 Add the IIS component
 Set the virtual directory for PNMSj.
Edit the Pnmsj.jnlp and Pnms.lax files.
 Input the PNMSj server IP address.
 Set the max-heap-size value.
OPEN CONTROL PANEL AND ADD CHECK THE ITEMS AS
OR REMOVE PROGRAMS WINDOW SHOWN BELOW

CHECK ON THE
CLICK ON INTERNET
THE INFORMATION
ADD/REMOVE SERVICES (IIS)
WINDOWS CLICK ON
COMPONENT DETAILS BUTTON

Server Setting: Internet Information Services (IIS) 1/4

SELECT INTERNET
INFORMATION
SERVICES FROM GO TO DEFAULT
THE WEB SITE AND
ADMINISTRATIVE RIGHT-CLICK TO
TOOLS WINDOW. OPEN CONTEXT
MENU. SELECT
NEW VIRTUAL CLICK NEXT BUTTON TO CONTINUE.
DIRECTORY.
Server Setting: Internet Information Services (IIS) 2/4
 Server Setting: Internet Information Services (IIS) 3/4

SELECT READ AND

BROWSE AND
UNCHECK THE REST
OF THE OPTIONS.

ENTER PnmsJ AS
THE ALIAS FOR
THE VIRTUAL
DIRECTORY. CLICK
ON NEXT BUTTON
TO CONTINUE. ENTER PNMSJ INSTALL
DIRECTORY. CLICK ON
NEXT BUTTON TO
CONTINUE.
CLICK ON NEXT BUTTON
TO FINISH.
Server Setting: Internet Information Services (IIS) 4/4
FTP server setting – 1/3
FTP server setting – 2/3
FTP server setting – 3/3
Server Setting: Edit the Pnmsj.jnlp file
ENTER THE PNMSj SERVER
IP ADDRESS IN THE LINE
SHOWN BELOW.
Part 1-C: Additional Settings
Server: PNMSj Additional Settings – PNMS Type
THE PNMS TYPE AND CONNECTION PORT THAT IT WILL UTILIZE
IN THE NE CAN BE CONFIGURED BY EDITING THE
PNMS.PROPERTIES FILE. THIS FILE IS LOCATED IN THE CONFIG
FOLDER OF THE PNMSJ INSTALL DIRECTORY (EX.
C:\PNMSJ\CONFIG). THIS FILE CAN BE EDITED BY WORDPAD OR
NOTEPAD.

THE “PnmsType” CAN HAVE THE

FOLLOWING VALUES:
1 REGIONAL TYPE (NORMAL)
2 CENTRAL TYPE (NORMAL)
3 NOT USED
4 REGIONAL TYPE (BACKGROUND)
5 CENTRAL TYPE (BACKGROUND)
Server: PNMSj Additional Settings – Connection Type
THE PNMS TYPE AND CONNECTION PORT THAT IT WILL UTILIZE
IN THE NE CAN BE CONFIGURED BY EDITING THE
PNMS.PROPERTIES FILE. THIS FILE IS LOCATED IN THE CONFIG
FOLDER OF THE PNMSJ INSTALL DIRECTORY (EX.
C:\PNMSJ\CONFIG). THIS FILE CAN BE EDITED BY WORDPAD OR
NOTEPAD.

THE “ConnStyle” CAN HAVE THE

FOLLOWING VALUES:
1 FIRST PNMS
2 SECOND PNMS
3 THIRD PNMS

THIS MEANS THAT A MAXIMUM 3

PNMSJ SERVERS CAN BE PUT IN
A SYSTEM. PARALLEL PNMS IS
ALSO POSSIBLE. EACH PNMS
MUST USE A UNIQUE ConnStyle.
Part 2: Remote Client Setting
Client: Remote Client Installation Flow

(1) JAVA™ RUNTIME/SDK

INSTALLATION

JAVA™ POLICY
(2) SETTING

LAUNCH REMOTE CLIENT

(3) (END OF INSTALL)
 Client: Java Runtime/SDK installation

ACCEPT THE LICENSE

AGREEMENT, CLICK ON
EXECUTE THE ACCEPT BUTTON TO
INSTALLATION FILE CONTINUE.
FOR THE JAVA™
RUNTIME/SDK.
 Client: Java Runtime/SDK installation

INSTALLATION WILL PROCEED

AND NO USER INTERACTION IS
NEED FROM THIS POINT.

CLICK ON FINISH BUTTON TO

COMPLETE THE INSTALLATION.
 Client:Java™ policy Setting (Common)
Copy the win.java.policy file from <CD-ROM Drive> <PNMSj Setup Disk
Directory> policy on the PNMS PC server (or workstation).
 Client:Java™ policy Setting (Common)
Paste the win.java.policy file copy in <Home Directory> of a User which you want to use as
PNMS Client on the Client PNMS PC.
For example, if the User is "user" and windows OS is installed in C drive, you would copy in
C:\Documents and Settings\user
Then Open the win.java.policy file with a text editor.
 Client:Java™ policy Setting (Common)
Enter the IP address of the PNMS Server, (not that of the Client PNMS), for JWS in
the selected area shown below. Save and close the modified file.
 Client:Java™ policy Setting (Common)
Rename win.java.policy file to .java.policy file.
From comand prompt, enter: ren win.java.policy .java.policy.
Confirm that file name has been changed.
 Client: PNMSj Internet Explorer (IE) Setting
 Make sure that the following requirements are available in the client
PC.
 Internet Explorer 6.0 or higher
 Acrobat Reader
 Java Runtime (j2re or j2SDK) Ver 1.6 update 7 or higher
 Java plug-in setting.
 Java policy setting.
 Set up java policy

URL: http://<IP.address.of.server>/Pnmsj/Pnmsj.html
 Client: Internet Explored (IE) Remote Client Launch
SELECT StartProgramsInternet URL: http://<IP of PNMS server>/Pnmsj/Pnmsj.html
Explorer FROM THE START MENU (in this example, IP address of server is 172.29.97.125)

CLICK APPLICATION IN THE

INTERNET EXPLORER
WINDOW. APPLICATION
WILL BE DOWNLOADED.
 Client: PNMSj Java Webstart Setting
 Make sure that the following requirements are available in the
client PC.
 Acrobat Reader
 Java Runtime (j2re or j2SDK) Ver 1.6 update 7 or higher
 Java policy setting.
 Set up java policy

Command : javaws http://<IP.address.of.server>/Pnmsj/Pnmsj.jnlp

 Client: Java™ Web Start Remote Client Launch
AFTER THE COMMAND IS PERFOMED APPLICATION WILL
BE DOWNLOADED

PNMS LOGIN SCREEN WILL APPEAR

BEFORE THE PNMS APPLICATION IS
STARTED.
 Creating shortcut for PNMSj application
OPEN CONTROL PANEL, SELECT
JAVA. JAVA CONTROL PANEL WILL
APPEAR.

RIGHT CLICK ON PNMSj JAVA WEB START LINE AND

SELECT INSTALL SHORTCUT

ON GENERAL TAB, CLICK ON

„VIEW”.

SHORTCUT OF PNMSj WILL BE PLACED ON THE

DESKTOP
Setting up a web proxy
Server: PNMSj Installation Flow
Windows Server 2008/ Windows Server 2008 R2

(1) INSTALL IIS

(2) FILE SHARING SETUP

(3) FIREWALL SETUP

(4) CONFIGURE THE

PNMS PC SERVER
(1)Install IIS
IIS needs to be installed on the PNMS PC Server.
(2) File sharing setup
To open History Data on PNMSj Client, it is necessary to setup the followings.
(3) Firewall setup
To open History Data on PNMSj Client, it is necessary to setup the followings.
In order to use PNMS Client, certain programs need to be allowed through Windows
Firewall.
< For Windows Server 2008>
(1)Configuring the PNMS PC Server
It will be necessary to edit the Pnmsj.jnlp file to use the PNMS Client..
Setting up web proxy
- End -