Answer: Provide One Year Free Update!

Download as pdf or txt
Download as pdf or txt
You are on page 1of 42

QUESTION

& ANSWER
HIGHER QUALITY, BETTER SERVICE

Provide One Year Free Update!


https://www.passquestion.com
The safer , easier way to help you pass any IT exams. 

Exam : E20-375

Title : RecoverPoint Specialist


Exam for Implementation
Engineers

Version : V8.02

1 / 41
The safer , easier way to help you pass any IT exams. 

1.A new RecoverPoint/SE environment has been installed with a single cluster. There are no limitations
regarding journal sizes and you want to choose how frequently RecoverPoint can create point-in-time
copies.
What is the highest frequency available for point-in-time copies in this environment?
A. One per I/O
B. One per sec.
C. One per 500 µsec.
D. One per 500 msec.
Answer: A

2.Which RecoverPoint product(s) may be licensed by the amount of array capacity?


A. RecoverPoint/EX only
B. RecoverPoint/CL only
C. RecoverPoint/SE
D. RecoverPoint/EX and RecoverPoint/CL
Answer: A

3.What is the maximum supported storage capacity, per license, for an EMC RecoverPoint/EX
environment?
A. 100 terabytes
B. 2 petabytes
C. 4 petabytes
D. 10 petabytes
Answer: B

4.What is the maximum number of clusters supported in an EMC RecoverPoint/CL environment?


A. 2
B. 3
C. 4
D. 5
Answer: D

5.In a EMC RecoverPoint environment, which EMC product adds support for heterogeneous storage
systems?
A. VPLEX
B. VNX/CX
C. VMAX
D. Isilon
Answer: A

6.Which EMC storage technologies are supported with EMC RecoverPoint?


A. VNX, VMAX, and VPLEX
B. VNX, Data Domain, and Isilon
C. VMAX, VPLEX, and Data Domain

2 / 41
The safer , easier way to help you pass any IT exams. 

D. VPLEX, Isilon, and VNX


Answer: A

7.What is the maximum number of copies of production data supported with RecoverPoint?
A. Four remote copies
B. One local copy and four remote copies
C. Two remote copies
D. Two local copies and two remote copies
Answer: A

8.There is one instance of RecoverPoint/CL installed that is protecting data within a data center.
What is the maximum number of additional clusters that can be added to this configuration?
A. 1
B. 2
C. 4
D. 5
Answer: C

9.Your business is planning to deploy RecoverPoint for your DR solution.


What is an important consideration when using Consistency Groups in RecoverPoint 4.1?
A. Supports up to two synchronous copies per Consistency Group
B. Supports up to three remote copies in a same remote cluster
C. Fibre connectivity is required for synchronous replication
D. Supports host-based and array-based write splitters
Answer: A

10.Which Ethernet interface on an RPA is used for replication to the remote clusters?
A. eth0
B. eth1
C. eth2
D. eth3
Answer: A

11.Which Ethernet interface on an RPA is used for management?


A. eth0
B. eth1
C. eth2
D. eth3
Answer: B

12.Through what does RecoverPoint support heterogeneous storage environments?


A. VPLEX
B. Any array-based splitter
C. APIs

3 / 41
The safer , easier way to help you pass any IT exams. 

D. VMAX splitter only


Answer: A

13.Which virtualization solution components are supported by RecoverPoint?


A. Hyper-V, VMware vCenter monitoring, VMware SRM
B. Hyper-V only
C. VMware vCenter monitoring only
D. VMware SRM only
Answer: A

14.What is the maximum number of copies supported using the MetroPoint topology for VPLEX
continuous data replication?
A. 3
B. 4
C. 5
D. 8
Answer: C

15.Which protocol does the vRPA use to access the journal volumes?
A. iSCSI
B. FC
C. IP
D. FCoE
Answer: A

16.A company is using an EMC VNX storage array. RecoverPoint is being configured to replicate to a DR
site.
RP will be protecting three datastores:
- A thick 100 GB LUN containing 60 GB of data
- A thin 50 GB LUN containing 15 GB of data
- A thick 75 GB LUN containing 75 GB of data
How much of the user data is being replicated to the DR site?
A. 150
B. 185
C. 190
D. 225
Answer: C

17.What is the maximum number of RPA clusters allowed in a RecoverPoint/SE configuration?


A. 1
B. 2
C. 4
D. 5
Answer: B

4 / 41
The safer , easier way to help you pass any IT exams. 

18.Which RecoverPoint feature requires the production copy to be located on a VNX?


A. Snap-based Replication
B. Deduplication
C. Synchronous replication
D. Distributed Consistency Groups
Answer: A

19.Snap-based Replication requires the production volume of a Consistency Group to be on which array
type?
A. VNX
B. VMAX
C. VPLEX
D. Isilon
Answer: A

20.A storage administrator has been tasked to demonstrate the image access capability of RecoverPoint.
Which RecoverPoint option should they use?
A. Test a Copy
B. Fail Over
C. Fail Back
D. Recover Production
Answer: A

21.A RecoverPoint cluster contains a Consistency Group with one remote copy.
Which volume can be used to verify that snapshots are being created?
A. Remote copy
B. Production copy
C. Repository
D. Snap copy
Answer: A

22.Which RecoverPoint features are supported on physical and virtual RPAs?


A. Deduplication, SRM integration, and Snapshot-Based Replication
B. Distributed CGs, Deduplication, and SRM integration
C. SRM integration, Snapshot-Based Replication, and Distributed CGs
D. Snapshot-Based Replication, Distributed CGs, and Deduplication
Answer: A

23.What is the minimum number of RecoverPoint Clusters required to use the MetroPoint feature?
A. 1
B. 2
C. 3
D. 5

5 / 41
The safer , easier way to help you pass any IT exams. 

Answer: B

24.A company recently acquired a new DR site and requires local Fibre Channel based production data to
be replicated synchronously. They are investigating what infrastructure is needed on this DR site.
What is an important connectivity consideration?
A. Site-to-site connectivity can be based on IP.
B. Site-to-site connectivity requires Fibre Channel.
C. Site-to-site connectivity requires FCIP.
D. Maximum synchronous replication speed is 400 MBps.
Answer: A

25.A company recently acquired a new DR site and requires their production data to be replicated to this
DR site.
What is an important consideration about the RecoverPoint out-of-band architecture?
A. Performance on the production site is not impacted.
B. Site-to-site connectivity needs to be based on Fibre Channel.
C. Maximum asynchronous replication speed is 400 MBps.
D. Maximum synchronous replication speed is 400 Mbps.
Answer: A

26.An existing RecoverPoint/CL environment consists of one cluster at the main office and two off-site DR
clusters. You have been asked to expand the environment to the maximum number of DR sites using
RecoverPoint.
How many additional clusters could be added to this RecoverPoint Environment?
A. 2
B. 4
C. 5
D. 8
Answer: A

27.An existing RecoverPoint/CL environment consists of one cluster at the main office and one off-site DR
cluster. You have been asked to expand the environment to the maximum number of DR sites using
RecoverPoint.
How many additional clusters could be added to this RecoverPoint Environment?
A. 2
B. 3
C. 4
D. 5
Answer: B

28.Which RecoverPoint family is licensed per array and array capacity?


A. RecoverPoint/EX only
B. RecoverPoint/SE
C. RecoverPoint/CL only

6 / 41
The safer , easier way to help you pass any IT exams. 

D. RecoverPoint/EX and RecoverPoint/CL


Answer: A

29.What are the minimum RecoverPoint and VPLEX versions that support MetroPoint?
A. RecoverPoint 4.1 and GeoSynchrony 5.4
B. RecoverPoint 4.0 and GeoSynchrony 5.3
C. RecoverPoint 4.1 and GeoSynchrony 5.3
D. RecoverPoint 4.0 and GeoSynchrony 5.4
Answer: A

30.What are key use cases for RecoverPoint?


A. Disaster Recovery, Operational Recovery, and Data Migration
B. Disaster Recovery and Operational Recovery only
C. Disaster Recovery and Data Migration only
D. High Availability Solution Implementation
Answer: A

31.An existing RecoverPoint cluster has four physical RPAs deployed with VMAX arrays.
Which RPAs need to be masked to the VMAX gatekeepers in order to deploy the VMAX splitter?
A. RPA 1 and RPA 2
B. RPA 1 only
C. All RPAs in the cluster
D. RPA 2 only
Answer: A

32.A customer is installing a new RecoverPoint environment. All RPAs have been racked, cabled, and
powered on. You have chosen to automatically discover the RPAs using Deployment Manager. After
running the discovery, no RPAs are found.
What is the most likely cause of this issue?
A. No DHCP server on the network
B. Port 443 not open on the network
C. RecoverPoint/SE wizard selected
D. RPAs not configured into a cluster
Answer: A

33.You are adding a VMAX array to a RecoverPoint/CL environment.


What needs to be done?
A. Verify there is a zone that includes the RPA ports and the same VMAX front end ports that are zoned to
the production host initiator.
B. Verify that the 16 new gatekeepers are in the same storage group as the repository and journals. Add
the RPA initiator and port groups to the masking view.
C. After setting up the masking view use boxmgmt to log in to one of the site leader RPAs and be sure to
tag all volumes that RecoverPoint is masked to – including the production and copy volumes.
D. Verify that the VMAX is at Enginuity microcode 5876 or higher. After doing the LUN masking, enable

7 / 41
The safer , easier way to help you pass any IT exams. 

Write-Protect ByPass (WPBP). Ensure that the proper license for the VMAX is installed on the RPAs.
Answer: A

34.A customer has three VMAX arrays and one VNX array fronted by an EMC VPLEX. They want to use
RecoverPoint to protect their environment.
How many licenses, of which type, would be required for their environment?
A. 1 EX license only
B. 4 EX licenses
C. 5 EX licenses
D. 1 SE license and 1 EX license
Answer: A

35.A customer has two VMAX arrays and three VNX arrays fronted by an EMC VPLEX. They wish to use
RecoverPoint to protect their environment.
How many licenses, and of which type, would be required for their environment?
A. 1 EX license
B. 1 SE license and 2 EX licenses
C. 5 EX licenses
D. 6 EX licenses
Answer: A

36.Which connectivity protocols are used to interconnect RecoverPoint clusters?


A. FC and IP
B. FC and iSCSI
C. FC and FCoE
D. FCoE and IP
Answer: A

37.What information is required to connect a new RecoverPoint cluster to an existing one?


A. WAN IP address and internal cluster name
B. RPA serial ID
C. Site ID and Management IP address
D. Internal cluster name only
Answer: A

38.You are installing RecoverPoint/SE, and have selected the automatic zoning option. There are four
VNX ports in each fabric.
How many zones are automatically created on each fabric for a two-node RPA cluster?
A. 2
B. 3
C. 4
D. 5
Answer: A

8 / 41
The safer , easier way to help you pass any IT exams. 

39.When using Deployment Manager to install RecoverPoint/SE, which zoning methods are available
with Brocade switches?
A. Automatic and Manual
B. Manual and Semi-automatic
C. Automatic and Semi-automatic
D. Automatic and Virtual
Answer: A

40.What must be installed on the VNX prior to deploying the RecoverPoint Write splitter?
A. RecoverPoint Splitter Enabler only
B. RecoverPoint Driver and RecoverPoint Splitter Enabler
C. RecoverPoint License
D. Unisphere Service Manager
Answer: A

41.You are responsible for installing a four-node RPA cluster. All RPAs are powered on. Both the FC and
IP networks are connected, zoned, and routed properly. The RPAs are loaded with the latest image and IP
addresses are set. However, Deployment Manager cannot discover RPAs.
What is a possible cause?
A. Port 22 not open between host running Deployment Manager and RPAs
B. Deployment Manager host and RPAs on different subnets
C. DHCP not used to set IP addresses for RPAs
D. RPAs not installed separately using Deployment Manager
Answer: A

42.When choosing a journal for a CG what would be a factor in selecting which LUNs to use?
A. Volumes that are all close to the same size
B. Volumes masked to the production host
C. Any volume less than 10 GB
D. Only thin LUNs
Answer: A

43.After expanding to include an additional existing RecoverPoint cluster you use Deployment Manager
to connect the clusters, but it fails.
What might be the problem?
A. New cluster is already licensed
B. RPAs at second cluster are not same type
C. Second cluster not yet added to Repository
D. No splitter added to second cluster
Answer: A

44.After expanding to include an additional existing RecoverPoint cluster you use Deployment Manager
to connect the clusters, but it fails.
What might be the problem?

9 / 41
The safer , easier way to help you pass any IT exams. 

A. New cluster has existing Consistency Group


B. RPAs at second cluster are not same type
C. Second cluster not yet added to the Repository
D. No splitter added to second cluster
Answer: A

45.A new RecoverPoint system is being installed and the RPAs need to be upgraded to the latest version.
How should this be done?
A. Choose the option to upgrade the RPA version from an ISO while installing RecoverPoint using
Deployment Manager.
B. Before doing the install ensure all the RPAs IP addresses reach each other. Connect to RPA1 with
boxmgmt and do the upgrade.
C. Install the new system with Deployment Manager and then log in as boxmgmt and perform the upgrade
on one RPA.
D. Upgrade the RPAs to the latest version first; otherwise Deployment Manager will prevent the
installation.
Answer: A

46.After installing two RecoverPoint clusters you find that a Consistency Group cannot be configured with
a remote copy.
Why?
A. Deployment Manager was not used to connect the clusters.
B. The RPAs at the second cluster are not the same type (virtual vs physical).
C. The second cluster has not yet been added to the Repository.
D. There is no splitter added to the second cluster.
Answer: A

47.A customer is interested in implementing a RecoverPoint solution using a four-node cluster with
physical RPAs.
How many total IP addresses are required for the cluster?
A. 4
B. 5
C. 8
D. 9
Answer: D

48.A customer wants to implement a two-node RecoverPoint solution with local replication. How many IP
addresses are required for each cluster?
A. 2
B. 3
C. 4
D. 5
Answer: D

10 / 41
The safer , easier way to help you pass any IT exams. 

49.A customer environment includes a two-cluster RecoverPoint/SE instance. They have a new data
center 100 km away that they wish to protect with RecoverPoint.
What steps are required to connect a new cluster to their existing RecoverPoint instance?
A. Use Deployment Manager to convert the existing instance to RP/EX. Use Deployment Manager to
connect the new cluster to the existing instance. Install RP/EX licenses for their existing arrays.
B. Use Deployment Manager to connect the new cluster to the existing instance.
C. Install RP/SE licenses for their existing arrays. Install RP/SE licenses for the new cluster. Use
Deployment Manager to connect the new cluster to the existing instance.
D. Install RP/CL licenses for their existing cluster. Use Deployment Manager to connect the new cluster to
the existing instance.
Answer: A

50.A customer environment includes a two-cluster RecoverPoint/SE instance. They have a new data
center 500 km away that they wish to protect with RecoverPoint.
What steps are required to connect a new cluster to their existing RecoverPoint instance?
A. Use Deployment Manager to convert the existing instance to RP/EX. Use Deployment Manager to
connect the new cluster to the existing instance. Install RP/EX licenses for their existing arrays.
B. Use Deployment Manager to connect the new cluster to the existing instance.
C. Install RP/SE licenses for their existing arrays. Install RP/SE licenses for the new cluster. Use
Deployment Manager to connect the new cluster to the existing instance.
D. Install RP/CL licenses for their existing cluster. Use Deployment Manager to connect the new cluster to
the existing instance.
Answer: A

51.You are adding an RPA to a cluster using Deployment Manager.


What requirement must be satisfied before proceeding?
A. Zoning and LUN masking must be known to be identical to the existing RPAs in the cluster.
B. RPA iSCSI configuration settings must be known. All other zoning and LUN masking settings will
automatically be read from the existing RPA site leader.
C. RPA and array iSCSI configuration settings must be known. All other zoning and LUN masking settings
will automatically be read from the existing RPA site leader.
D. RPA and Storage iSCSI configuration settings will automatically be read from the cluster.
Answer: A

52.Which RecoverPoint tool is used for system conversions?


A. Deployment Manager
B. Unisphere for RecoverPoint
C. SolVe Desktop
D. BCSD Sizing
Answer: A

53.You are implementing a RecoverPoint/SE cluster using vRPAs.


What must be configured and available on the new VNX array prior to the installation of the cluster with
Deployment Manager?

11 / 41
The safer , easier way to help you pass any IT exams. 

A. An iSCSI interface from SPA and SPB of the VNX


B. Zones from SPA and SPB FC ports to the ESX servers
C. Zones from SPA and SPB FC ports to the Virtual WWNs of the vRPAs
D. Physical connections from the ESX HBAs to the FC interfaces of SPA and SPB
Answer: A

54.A RecoverPoint/SE cluster is using vRPAs. A second cluster needs to be connected.


Which RPA type must be used at the new cluster?
A. Virtual or Physical
B. Virtual only
C. Generation 5
D. Physical only
Answer: A

55.A customer is evaluating the deployment of RecoverPoint with their VMAX array. They want to deploy
the RPAs in the virtual appliance form. They ask your opinion about using vRPA versus physical
appliances.
What should you advise them?
A. They can only use physical RPAs in the current environment.
B. For performance reasons, they can mix vRPAs and physical RPAs in the same RPA cluster, but only at
remote sites.
C. For performance reasons, they cannot mix physical and vRPAs within an RPA cluster.
D. They can mix vRPA and physical RPAs in the same RPA cluster at all sites.
Answer: A

56.A customer is evaluating the deployment of RecoverPoint with their VNX array. They want to deploy
the RPAs in virtual appliance form. They ask your opinion about using vRPA versus physical appliances.
What should you advise them?
A. They cannot mix physical and virtual RPAs within their RPA cluster.
B. For performance reasons, they can mix vRPAs and physical RPAs in the remote RPA cluster.
C. vRPAs cannot be used in a VNX environment.
D. They can mix vRPA and physical RPAs in the same RPA cluster at all sites.
Answer: A

57.A customer is installing a single cluster RecoverPoint/SE environment and has decided to create a
cluster of six virtual RPAs to perform RecoverPoint operations.
According to EMC best practices, how many ESX hosts are needed to host the required vRPAs?
A. 2
B. 3
C. 4
D. 6
Answer: D

58.A customer environment uses VMAX arrays for production storage. The customer wants to implement

12 / 41
The safer , easier way to help you pass any IT exams. 

RecoverPoint for data protection. Having researched vRPAs, they want to use this technology as well.
What should you advise them?
A. vRPAs are only supported with VNX arrays
B. Add iSCSI interfaces to their VMAX arrays
C. Use vRPAs with FC connections to the SAN
D. Implement FCoE for connections from the vRPAs
Answer: A

59.What is a prerequisite for deploying a RecoverPoint/SE system?


A. VNX splitter enabled
B. RecoverPoint/SE license installed
C. RecoverPoint/SE registered with EMC
D. Unisphere for RecoverPoint installed and running
Answer: A

60.When selecting the semi-automatic zoning method while installing RecoverPoint/SE, which zones are
displayed per RPA?
A. One RPA HBA zoned to SP-A One RPA HBA zoned to SP-B All RPA HBAs zoned to each other
B. All RPA HBAs zoned to SP-A All RPA HBAs zoned to SP-B All RPA HBAs zoned to each other
C. All RPA HBAs zoned to SP-A All RPA HBAs zoned to SP-B One RPA HBA zoned to multiple HBA ports
on each of the other RPAs in the cluster
D. One RPA HBA zoned to SP-A One RPA HBA zoned to SP-B One RPA HBA zoned to a single HBA on
each of the other RPAs in the cluster
Answer: A

61.Which statement is true regarding vRPAs?


A. vRPAs are deployed using the OVA template.
B. The proper license must be installed before vRPA deployment.
C. vRPAs can be connected to storage through the VNX splitter in the RecoverPoint/SE system.
D. vRPAs are installed using Unisphere for RecoverPoint.
Answer: A

62.Which statement is true regarding vRPAs?


A. vCenter Server is required to deploy vRPAs.
B. The proper license must be installed before vRPA deployment.
C. vRPAs can be connected to storage through the VNX splitter in the RecoverPoint/SE system.
D. vRPAs are installed using Unisphere for RecoverPoint.
Answer: A

63.Which Unisphere for RecoverPoint view displays both the system traffic and Consistency Group
status?
A. RecoverPoint Dashboard
B. Recovery
C. RPA Clusters

13 / 41
The safer , easier way to help you pass any IT exams. 

D. Admin
Answer: A

64.In the Recovery tab of Unisphere for RecoverPoint, which option is used to temporarily mount an
image?
A. Test a Copy
B. Enable Image Access
C. Manage Recovery
D. Enable Direct Access
Answer: A

65.After selecting a cluster in the RPA Clusters tab, which option can display alerts that have been logged
for any of the physical components of the RecoverPoint system in that cluster?
A. General Cluster Info
B. Overall Health
C. System Events
D. System Notifications
Answer: A

66.In Unisphere for RecoverPoint, where should a user navigate in order to collect logs for support
purposes?
A. Admin Tab > System Analysis Tools > Collect System Information
B. Admin Tab > System Notifications > Configure System Reports and Alerts
C. Dashboard Tab > System Analysis Tools > Detect Bottlenecks
D. Admin Tab > RPA Clusters > Export Consolidated Statistics
Answer: A

67.The Getting Started wizard that is displayed the first time a user accesses Unisphere for RecoverPoint
assists with performing what action?
A. Adding licenses
B. Adding splitters
C. Configuring RPAs
D. Creating Consistency Groups
Answer: A

68.System events can be copied to the clipboard from which Unisphere for RecoverPoint view?
A. RecoverPoint Dashboard
B. Recovery
C. RPA Clusters
D. Admin
Answer: A

69.When logging into an unattached RecoverPoint appliance for the first time, which username and
password combination must be used?

14 / 41
The safer , easier way to help you pass any IT exams. 

A. usernamE.boxmgmt passworD.boxmgmt
B. usernamE.admin passworD.Mi@Dim7T
C. usernamE.admin passworD.admin
D. usernamE.service passworD.service
Answer: A

70.You are working on a RecoverPoint local replication solution in an environment that includes VNX and
VMAX storage arrays. You want to create a Consistency Group (CG) for your Oracle database. However,
some of the database volumes are located in the VNX and others are located in the VMAX.
What is the recommended management solution?
A. Create one CG using VNX and VMAX volumes
B. Create a new RecoverPoint cluster and add the VNX splitter
C. Migrate all LUNs to the VMAX
D. Create two CGs: one for VNX volumes and another for VMAX volumes
Answer: A

71.Which journal action available in Unisphere for RecoverPoint will NOT result in a full sweep
synchronization and the loss of all history in the existing journal?
A. Add a journal volume
B. Remove a journal volume
C. Expand a journal volume
D. Reduce a journal volume
Answer: A

72.In order to create a new Consistency Group, a user should navigate to which option within the
Protection tab of Unisphere for RecoverPoint?
A. Protect Volumes
B. Manage Protection
C. Deployment Manager
D. Group Sets
Answer: A

73.A company has a DR site connected using a 4 Gbps FC link and two RPAs on the primary site, and two
RPAs at the DR site. They are experiencing high load events although the FC link is not fully utilized.
What would be the best solution to get the FC link utilization up as high as possible?
A. Add two RPAs to the primary site and add two RPAs to the DR site
B. Add two RPAs to the primary site only
C. Use distributed consistency groups with one primary RPA and two secondary RPAs on the primary site
D. Add two RPAs to the DR site only
Answer: A

74.Which RecoverPoint feature allows the protection of volumes on both sides of a VPLEX Metro
Cluster?
A. MetroPoint

15 / 41
The safer , easier way to help you pass any IT exams. 

B. Continuous Remote Replication


C. Distributed Consistency Groups
D. Group Sets
Answer: A

75.A storage administrator has an implementation with 40 Consistency Groups (CGs). They need to
create distributed CGs.
What is the maximum number of distributed CGs that can be added to this particular system?
A. 8
B. 16
C. 24
D. 128
Answer: A

76.A storage administrator has a RecoverPoint environment with vRPAs containing 64 Consistency
Groups (CGs). They want to create distributed CGs.
What is the maximum number of distributed CGs that can be added to this particular system?
A. 0
B. 8
C. 40
D. 128
Answer: A

77.You are protecting a volume using the wizard in Unisphere for RecoverPoint.
Which state will the new Consistency Group be in immediately after completing the wizard?
A. Initializing
B. Active
C. Paused
D. Disabled
Answer: A

78.What is used when more performance is needed than a single RPA can provide for asynchronous
replication?
A. Distributed Consistency Groups
B. Journal compression
C. Fibre Channel connections
D. Multi-cluster copies
Answer: A

79.What is the minimum size of the journal when using Distributed Consistency Groups?
A. 5 GB
B. 20 GB
C. 40 GB
D. 60 GB

16 / 41
The safer , easier way to help you pass any IT exams. 

Answer: C

80.A company with a DR site connected with a 2 Gbps FC link has three RPAs at each site. They are
experiencing High Load events, although the FC link is not fully utilized.
What would be the best solution to get the FC link utilization up as high as possible while mitigating those
events?
A. Use a Distributed Consistency Group
B. Add one RPA to the Primary site
C. Use the Consistency Group on both RPAs and add two RPAs to the secondary site
D. Add one RPA to the DR site
Answer: A

81.A company with a DR site connected with a 2 Gbps FC link has three vRPAs at each site. They are
experiencing High Load events, although the FC link is not fully utilized.
What would be the best solution to get the FC link utilization up as high as possible while mitigating those
events?
A. Replace the vRPAs with physical RPAs and start using a Distributed Consistency Group
B. Add two more vRPAs to the Primary site and divide the Consistency Group into four segments
C. Divide the Consistency Group into two segments and start using Distributed Consistency Groups
D. Add two RPAs to the Primary site as well as the secondary site
Answer: A

82.What should be used when more performance is needed than a single RPA can provide for
asynchronous replication?
A. Distributed Consistency Groups
B. Journal Compression
C. Fibre Channel connections
D. Multi-Cluster copies
Answer: A

83.You are protecting a volume using the wizard in Unisphere for RecoverPoint.
Which state will the new Consistency Group be in immediately after completing the wizard?
A. Initializing
B. Active
C. Paused
D. Disabled
Answer: A

84.Which FA ports must the production LUN be mapped to in order to perform write splitting using the
VMAX splitter?
A. The ports zoned to both the Host and the RPAs only
B. Every available port; the RPAs access the VMAX through the gatekeepers
C. The ports zoned to the Production Host only
D. The ports zoned to the RPAs only

17 / 41
The safer , easier way to help you pass any IT exams. 

Answer: A

85.A Consistency Group consists of one production copy, one local copy, and two remote copies.
How many journals are required for this configuration?
A. Four in total
B. Two in total
C. One for each remote copy and one for the local copy
D. One for the production and one for each remote copy
Answer: A

86.You are creating a Consistency Group with the Protect Volumes wizard in a RecoverPoint/EX
environment.
What LUNs are displayed in the list generated by the wizard?
A. LUNs masked to the RPAs
B. LUNs configured on the licensed array
C. LUNs attached to the splitter
D. LUNs masked to the production host
Answer: A

87.What is a named point-in-time copy of data marked by the system for recovery purposes within
RecoverPoint?
A. Bookmark
B. Snapshot
C. Image Access Point
D. Journal
Answer: A

88.What is the first operation involved in the RecoverPoint Initialization process?


A. Production and replica volumes are divided into data segments.
B. Dirty segments of the replica volume Consistency Group are checked.
C. Hash is created for all segments in production and replica volumes.
D. Production and replica hashes are compared.
Answer: A

89.What is a characteristic of a full sweep?


A. Initialization is done on all volumes in a Consistency Group.
B. Initialization is done on specific volumes in a Consistency Group.
C. A full sweep occurs when a user enables a disabled volume.
D. A full sweep occurs when a user enables a disabled splitter.
Answer: A

90.What is a characteristic of a volume sweep?


A. Initialization is done on specific volumes in a Consistency Group.
B. Initialization is done on all volumes in a Consistency Group.

18 / 41
The safer , easier way to help you pass any IT exams. 

C. A volume sweep occurs when a user enables a disabled volume.


D. A volume sweep occurs when a user enables a disabled splitter.
Answer: A

91.How much data, at a minimum, must change in order for the snapshot consolidation process to start?
A. 64 MB
B. 128 MB
C. 512 MB
D. 1 GB
Answer: C

92.What user action causes a full sweep to occur?


A. Enable a disabled Consistency Group
B. Enable a disabled volume
C. Enable a disabled splitter
D. Attach a volume to a splitter
Answer: A

93.Which statement is true about Logged Access mode?


A. RecoverPoint will roll back (or forward) the snapshots until the selected image is reached.
B. RecoverPoint creates a virtual disk by pulling the needed data either from the snapshots or from the
storage.
C. RecoverPoint will retrieve the snapshot from the Image Access log.
D. When Logged Access is disabled, all writes made to the image will be saved to the journal.
Answer: A

94.When a copy is in Image Access mode, where is the Image Access Log stored?
A. Journal of the copy
B. Journal of the source
C. In memory of the RPA
D. On the copy volume
Answer: A

95.You are a storage administrator tasked with creating a Consistency Group in a RecoverPoint/EX
system. You launch the Protect Volumes wizard in Unisphere and notice that the desired production
volume is not available.
What would be a possible cause?
A. The volumes are not masked to the RPAs.
B. The volumes are masked to a host.
C. The journal volumes are on a non-licensed array.
D. Consistency Groups can only be created by boxmgmt.
Answer: A

96.You are a storage administrator tasked with creating a Consistency Group in a RecoverPoint/EX

19 / 41
The safer , easier way to help you pass any IT exams. 

system. You launch the Protect Volumes wizard in Unisphere and notice that the desired production
volume is not available.
What would be a possible cause?
A. The production volumes are on a non-licensed array.
B. The volumes are masked to a host.
C. The journal volumes are on a non-licensed array.
D. Consistency Groups can only be created by boxmgmt.
Answer: A

97.Which Image Access Mode should be used when large portions of an image might be changed?
A. Logged Access
B. Virtual Access (without Roll)
C. Snap Access
D. Virtual Access (with Roll)
Answer: A

98.If you wanted to use the Roll Image in Background option to access an image, which access mode
should you select?
A. Virtual Access
B. Logged access
C. Direct Access
D. Snap Access
Answer: A

99.Which image access mode provides the quickest way to access data?
A. Virtual Access
B. Logged Access
C. Direct Access
D. Snap Access
Answer: A

100.When determining the journal volume size, which parameters must be considered?
A. Rate of change Data set to be replicated Number of snapshots to retain
B. Rate of change Percentage of sequential writes RPO/RTO
C. Number of snapshots to retain Rate of change Consistency Group type
D. Number of Consistency Groups RPO/RTO Network type
Answer: A

101.An application team will be performing a major update to a RecoverPoint protected application. You
have been asked by the application team for the best way to ensure a quick recovery at the remote cluster
in case the update fails.
In RecoverPoint, what should be done to the associated Consistency Group?
A. Manually create a bookmark prior to the update
B. Enable logged access mode on the source

20 / 41
The safer , easier way to help you pass any IT exams. 

C. Enable physical access on the target


D. Use virtual access mode on the source
Answer: A

102.A company is using RecoverPoint to protect their environment. They need to add a new Replication
Set to a Consistency Group that will have an extremely high I/O load.
What would best meet their needs?
A. Use the Distributed Consistency Group feature
B. Increase the number of storage LUNs for the journal
C. Devote an RPA to just that Consistency Group
D. Increase the Consistency Group journal volume size
Answer: A

103.You are using the Test a Copy wizard and have chosen virtual access to test your database upgrade.
The image has been mounted to a test host. While testing the database upgrade, the host loses access to
the image.
What can you do to avoid this problem in the future?
A. Add more journal capacity
B. Add an RPA to the local RecoverPoint cluster
C. Re-enable image access
D. Mount the image to another host
Answer: A

104.An administrator performs a Consistency Group failover to a remote cluster.


What happens to the data stored in the copy journal after the copy journal becomes the production
journal?
A. It is deleted.
B. It is replicated to the journal at the production site.
C. It is replicated to the journal volume at the DR site.
D. It remains as accessible snapshots at the DR site.
Answer: A

105.A company has a database protected by RecoverPoint that has become corrupted. They want to use
the Recover Production wizard to repair the corruption.
What action should be taken at the production host prior to starting the recovery?
A. Unmount the production volume(s)
B. Pause replication
C. Disable the Consistency Group
D. Create a bookmark
Answer: A

106.What is a possible trigger to initiate RecoverPoint Snap-based Replication?


A. High Load condition detected
B. RecoverPoint snapshot takes place

21 / 41
The safer , easier way to help you pass any IT exams. 

C. INIT snapshot takes place


D. Incoming date marked on Delta Marker stream
Answer: A

107.Which EMC storage does RecoverPoint leverage for Snap-based Replication?


A. VNX only
B. VMAX only
C. VPLEX
D. VNX and VMAX
Answer: A

108.A conversion from RecoverPoint/SE to RecoverPoint/EX was just completed.


What is the next required step?
A. Remove RecoverPoint/SE license, then add RecoverPoint/EX license
B. Add RecoverPoint/EX license directly, because the newly added license will replace the existing one
C. Run a health check of RecoverPoint/EX
D. Reconfigure the Consistency Groups
Answer: A

109.You have VMware SRM with RecoverPoint protection already configured.


What additional software is needed to run an SRM failover using a particular point-in-time image from
RecoverPoint?
A. VSI RecoverPoint Management plug-in
B. Replication Manager
C. VSI for VMware vSphere Web Client
D. RecoverPoint SRA
Answer: A

110.Which GUI do you use when choosing a point-in-time image for VMware SRM to use during a failover
or failover test?
A. VSphere Client
B. Unisphere for RecoverPoint
C. VSphere Web Client
D. Replication Manager
Answer: A

111.The VSI RecoverPoint Management plug-in can protect datastores accessed by the ESXi host using
which protocols?
A. Fibre Channel, FCoE, and iSCSI
B. Fibre Channel, FCoE, and NFS
C. FCoE, iSCSI, and CIFS
D. FCoE, iSCSI, and NFS
Answer: A

22 / 41
The safer , easier way to help you pass any IT exams. 

112.A VMware user is currently protecting their virtual application servers with RecoverPoint. All data is
stored on two VNX arrays. They will soon be adding Site Recovery Manager (SRM) to their VMware
infrastructure.
What will be needed to integrate RecoverPoint functionality into their SRM deployment?
A. EMC Storage Replication Adapter (SRA) for RecoverPoint only
B. EMC Virtual Storage Integrator (VSI)
C. EMC Storage Replication Adapters (SRAs) for VNX and RecoverPoint
D. vSphere SRM Plug-in for Unisphere for RecoverPoint
Answer: A

113.An Oracle user is currently protecting their virtual application servers with RecoverPoint. All data is
stored on two VNX arrays. They will soon be adding Site Recovery Manager (SRM) to their VMware
infrastructure.
What will be needed to integrate RecoverPoint functionality into their SRM deployment?
A. EMC Storage Replication Adapter (SRA) for RecoverPoint only
B. EMC Virtual Storage Integrator (VSI)
C. EMC Storage Replication Adapters (SRAs) for VNX and RecoverPoint
D. vSphere SRM Plug-in for Unisphere for RecoverPoint
Answer: A

114.A storage administrator is installing the VSI RecoverPoint Management plug-in, but the installation
fails.
What could be causing this?
A. vSphere client not installed
B. vSphere client not running during the installation
C. RPAs used were all virtual
D. At least one virtual RPA present
Answer: A

115.What is a benefit of integrating RecoverPoint with VMware Site Recovery Manager (SRM)?
A. Enables coordinated failover of virtual machines and their storage
B. Eliminates hardware dependencies when using heterogeneous storage with VMware
C. Enables replication of individual virtual machines without the need to replicate an entire VMFS volume
D. Enables full protection of VMware ESXi servers
Answer: A

116.In a VPLEX splitter environment, where is the splitter process running?


A. VPLEX directors
B. VPLEX FE ports
C. VPLEX BE ports
D. VPLEX volumes
Answer: A

117.An existing environment is replicating using RecoverPoint/CL. A new VPLEX has just been installed

23 / 41
The safer , easier way to help you pass any IT exams. 

and the VPLEX splitter has been added to the RecoverPoint configuration. The administrator can see the
VPLEX splitter in Unisphere for RecoverPoint but cannot obtain management, installation, and integration
information about volume types.
What could cause this issue?
A. RecoverPoint and VPLEX certificates have not been exchanged.
B. The VPLEX certificate has expired.
C. VPLEX splitter is only compatible with RecoverPoint/EX.
D. RPAs have not been added to a Storage View.
Answer: A

118.For a RecoverPoint system with multiple clusters, how many gatekeepers are needed for each VMAX
splitter/RecoverPoint-cluster combination?
A. 2
B. 8
C. 4
D. 16
Answer: D

119.A large data center is hosting storage protection solutions for multiple companies. This solution is
accomplished by the hosting organization's ability to consolidate data to an environment with two VNX
arrays.
How many RecoverPoint clusters can be used in this environment?
A. 12 clusters, assuming each LUN is attached to only one cluster at a time
B. 6 clusters, assuming only vRPAs are used
C. 12 clusters, assuming each LUN is replicated across the clusters
D. 6 clusters, assuming each LUN is attached to only one cluster at a time
Answer: A

120.An organization is hosting storage protection solutions for multiple companies. This solution is
accomplished by the hosting organization's ability to consolidate data to a single VNX platform.
How many RecoverPoint clusters can be used in this environment?
A. 6 clusters, assuming each LUN is attached to only one cluster at a time
B. 6 clusters, assuming only vRPAs are used
C. 8 clusters, assuming each LUN is replicated across the clusters
D. 8 clusters, assuming each LUN is attached to only one cluster at a time
Answer: A

121.When creating a Consistency Group (CG), what is true of RecoverPoint/SE only?


A. All volumes of the array are displayed in the available volumes list.
B. Journal Compression may be used.
C. The CG must be created from Unisphere for RecoverPoint.
D. Journal volumes may be automatically provisioned.
Answer: A

24 / 41
The safer , easier way to help you pass any IT exams. 

122.Which ports from a VPLEX Metro system must be zoned to the RPAs in order to install the VPLEX
write splitter?
A. FE and BE ports
B. FE ports only
C. BE ports only
D. FA ports
Answer: A

123.When is the Open Replicator RecoverPoint session created for each production volume in the
Consistency Group (CG)?
A. CG is enabled
B. CG is created
C. LUN is attached to the splitter
D. LUN is added to an RSET
Answer: A

124.When is the Open Replicator RecoverPoint session created for each replica volume in the
Consistency Group (CG)?
A. CG is put into Image Access mode
B. CG is created
C. CG is enabled
D. CG is taken out of Image Access mode
Answer: A

125.When designing an EMC RecoverPoint environment, what must be taken into account when a site
consists of multiple VMAX splitters or multiple RecoverPoint clusters?
A. A total of 16 gatekeepers are required for each VMAX splitter/RecoverPoint cluster combination.
B. All gatekeepers must be connected to each VMAX splitter/RecoverPoint cluster combination with fixed
paths.
C. A total of eight gatekeepers are required for each VMAX splitter/RecoverPoint cluster combination.
D. When the VMAX splitter/RecoverPoint cluster is connected through Fibre Channel only two
gatekeepers must be used.
Answer: A

126.Which Open Replicator mode is used by the RecoverPoint VMAX write splitter?
A. Modified Hot Push
B. Cold Push
C. Hot Pull
D. Cold Pull
Answer: A

127.When RecoverPoint is deployed with a VMAX splitter, what presents the virtual target and virtual
remote devices?
A. RPAs

25 / 41
The safer , easier way to help you pass any IT exams. 

B. VMAX
C. Switch
D. Gatekeepers
Answer: A

128.Once a device is in an Open Replicator RecoverPoint session, what must be done in order to make
configuration changes to that device?
A. Disable the Configuration Group
B. Pause the Configuration Group
C. Unmap the device
D. Unmask the device
Answer: A

129.A VPLEX write splitter can be shared with how many RecoverPoint clusters?
A. 5
B. 6
C. 8
D. 10
Answer: B

130.You have been tasked with installing licenses for your RecoverPoint/CL System. It consists of a single
cluster with one VMAX and three VNX arrays.
How many license files would you need to install for proper cluster operation?
A. 1
B. 2
C. 3
D. 4
Answer: A

131.Which type of Consistency Group requires a primary and secondary production copy?
A. MetroPoint
B. Synchronous
C. Distributed
D. Asynchronous
Answer: A

132.What are two requirements for an EMC RPA to connect to an EMC VNX via a SAN?
A. Each VNX SP needs to be connected to both fabrics At least two initiators per RPA need to be zoned to
each SP
B. Each VNX SP needs to be connected to both fabrics RPA HBA1 needs to be zoned to SPA and RPA
HBA2 needs to be zoned to SPB
C. Each VNX SP needs to be connected on a separate fabric At least two initiators per RPA need to be
zoned to each SP
D. Each VNX SP needs to be connected on a separate fabric RPA HBA1 needs to be zoned to SPA and

26 / 41
The safer , easier way to help you pass any IT exams. 

RPA HBA2 needs to be zoned to SPB


Answer: A

133.What action causes the loss of journal content?


A. The replica is accessed in Direct Access mode
B. Enabling Image Access mode
C. A journal is added to a Consistency Group
D. An RPA performed marking
Answer: A

134.When registering the RPA with a VNX to enable a VNX splitter for RecoverPoint, what failover mode
must be set on the VNX?
A. 1
B. 2
C. 3
D. 4
Answer: D

135.What would cause a volume sweep to occur?


A. A previously disabled volume is enabled
B. A new Replication Set is added to a disabled Consistency Group
C. A previously enabled splitter is disabled
D. A Replication Set is removed from a disabled Consistency Group
Answer: A

136.What would cause a volume sweep to occur?


A. A new Replication Set is added to an enabled Consistency Group
B. A previously disabled splitter is enabled
C. A Replication Set is removed from a disabled Consistency Group
D. A previously enabled splitter is disabled
Answer: A

137.A VPLEX write splitter can be shared with how many RecoverPoint clusters?
A. 5
B. 6
C. 8
D. 10
Answer: B

138.What is the maximum number of VMAX splitters that can be added to a RecoverPoint cluster?
A. 2
B. 4
C. 5
D. 6

27 / 41
The safer , easier way to help you pass any IT exams. 

Answer: B

139.Which tool is used to enable a VNX splitter?


A. Unisphere Service Manager
B. Unisphere for RecoverPoint
C. Deployment Manager
D. NaviSecCLI
Answer: A

140.What is the maximum number of RecoverPoint clusters that can share a VMAX splitter?
A. 3
B. 4
C. 5
D. 6
Answer: D

141.What zoning must be created in the fabric when implementing a VNX splitter?
A. Separate server-to-storage, RPA-to-storage, and RPA-to-RPA zones
B. Separate VSANs and zones for the front-end and back-end devices
C. Separate server-to-storage, RPA-to-storage, and server-to-RPA zones
D. Separate server-to-storage, RPA-to-storage, and RPA-to-RPA virtual fabric zones
Answer: A

142.What zoning must be created in the fabric when implementing a VMAX splitter?
A. Separate server-to-storage, RPA-to-RPA, and RPA-to-storage zones
B. Separate VSANs and zones for the front-end and back-end devices
C. Separate RPA-to-RPA and RPA-to-server zones
D. Multiple VSANs with a zone per RPA and front end-devices
Answer: A

143.You are implementing a VPLEX 4-engine Metro with a RecoverPoint cluster at one site. You need to
add all VPLEX splitters to the RecoverPoint cluster.
How many splitters need to be registered?
A. 1
B. 2
C. 4
D. 8
Answer: A

144.A company is currently using RecoverPoint/SE in their environment. They have purchased a VMAX
which will be deployed to replace the VNX splitter at one site only.
What must be done before they can use the VMAX with RecoverPoint (RP)?
A. Use RecoverPoint Deployment Manager to convert from RP/SE to RP/EX or RP/CL
B. Use Unisphere for RecoverPoint to convert from RP/SE to RP/EX or RP/CL

28 / 41
The safer , easier way to help you pass any IT exams. 

C. Purchase and use a VMAX at the other site


D. Deploy an updated splitter on the existing array that will function with the new VMAX splitter
Answer: A

145.A company is currently using RecoverPoint/SE in their environment. They have purchased a VMAX
which will be deployed to replace a VNX splitter at one site only.
What must be done before they can use the VMAX with RecoverPoint (RP)?
A. Obtain an updated license that will support RP/EX or RP/CL
B. Use Unisphere for RecoverPoint to convert from RP/SE to RP/EX or RP/CL
C. Purchase and use a VMAX at the other site
D. Deploy an updated splitter on the existing array that will function with the new VMAX splitter
Answer: A

146.A company is currently using RecoverPoint/CL with CLARiiON CXs in their environment. All of the
data has been migrated to new VNXs and the CX splitters need to be removed from RecoverPoint.
How is this accomplished?
A. In Unisphere for RecoverPoint, navigate to RPA Clusters > RPA-Cluster-Name tab > Splitters and
remove the CX splitters
B. In Unisphere for RecoverPoint, navigate to RPA Clusters > Splitters and remove the CX splitters
C. Use RecoverPoint Deployment Manager to remove the CX splitters
D. The CXs will not be detected by Unisphere and the splitter entries will be removed automatically
Answer: A

147.What does the MetroPoint feature provide?


A. Local protection on both sides of a VPLEX Metro
B. Local protection on one side of a VPLEX Metro
C. Protection for only the active copy of a VPLEX distributed device
D. Simplified manual switchover
Answer: A

148.For optimal performance when presenting gatekeepers for a VMAX splitter, how many FA ports
should be used in each port group?
A. 4
B. 8
C. 12
D. 16
Answer: B

149.Which authentication method is available for use between the vRPA and the VNX when configuring
RecoverPoint/SE with Deployment Manager?
A. CHAP
B. iSNS
C. LDAP
D. RSA

29 / 41
The safer , easier way to help you pass any IT exams. 

Answer: A

150.You need to define the volumes required in a RecoverPoint solution. Your environment includes
VMAX arrays. Four RPAs per cluster will be deployed.
How many gatekeeper volumes are required per cluster?
A. 4
B. 8
C. 16
D. 32
Answer: C

151.You are deploying a RecoverPoint cluster into an existing VPLEX environment. You want to validate
the following conditions: -VPLEX splitters are installed -All VPLEX splitters are the same version -VPLEX
splitter status. In addition, you want to verify that the VPLEX management server can reach all of the
attached RecoverPoint clusters.
How can you verify all the information?
A. Use VPLEX CLI to run rp validate-configuration
B. Use VPLEX CLI to run rp verify-configuration
C. Use RecoverPoint CLI to run rp validate-configuration
D. Use RecoverPoint CLI to run rp verify-configuration
Answer: A

152.A company already using RecoverPoint/SE has just finished installing and configuring VPLEX. They
are unable to use the VPLEX splitter.
What might cause this issue?
A. VPLEX splitter not supported with RP/SE
B. RecoverPoint not licensed on the VPLEX
C. Splitter not activated on the VPLEX
D. Splitter not installed on the VPLEX
Answer: A

153.When adding a new vRPA, what is the only storage authentication method that is supported?
A. CHAP
B. iSNS
C. RADIUS
D. LDAP
Answer: A

154.A company has a RecoverPoint environment with 20 Consistency Groups doing remote replication. A
new building was just acquired for disaster recovery and they want to move to this new location. The IP
addresses and cluster name are going to be changed.
What should the company consider before making the proposed change?
A. The Cluster Modification wizard should be used
B. Changes cannot be made without a full sweep of the production and replica copies

30 / 41
The safer , easier way to help you pass any IT exams. 

C. Additional journal space will be required at the production site


D. Changes cannot be made without a full sweep of the replica copies only
Answer: A

155.When modifying a cluster's settings, what value can be changed from the Environment Settings
screen in Deployment Manager?
A. Cluster Name
B. IP Type
C. Cluster Management IP
D. Additional Gateways
Answer: A

156.A customer has a four-node RecoverPoint cluster using a VNX array. All LUNs are replicating and
failover has been tested. The customer would like to integrate RecoverPoint and Unisphere. However,
they are unable to manage the cluster through Unisphere.
What should the customer do to correct the issue?
A. Convert to RecoverPoint/SE using Deployment Manager
B. Reinstall the RecoverPoint splitter enabler on the VNX
C. Rescan the VNX splitters in the management application
D. Reinstall the RecoverPoint/SE license file
Answer: A

157.A customer has a four-node RecoverPoint cluster replicating over a 10 Mbps WAN link. They have a
requirement to upgrade the WAN link to 1 Gbps. This will require a change of the default gateway on the
RPAs. They need to accomplish this with as little impact as possible.
What can be done?
A. Use Deployment Manager to edit the cluster settings
B. Pause replication and update one RPA at a time
C. Pause replication and update all RPAs simultaneously
D. Leave the Consistency Groups alone and update one RPA at a time
Answer: A

158.You are adding a new vRPA to a cluster using the Add New RPAs wizard in Deployment Manager.
SAN diagnostics fail and you cannot add the RPA. Pings to the vRPA and VNX iSCSI ports are returned
successfully.
What is most likely the cause for this connection problem?
A. CHAP authentication not correct
B. vRPA iSCSI ports MTU set to a number lower than 9000
C. Default gateway setting for RPA iSCSI ports not correct
D. Wrong IP version set on vRPA iSCSI ports
Answer: A

159.During deployment of a vRPA OVF template a temporary IP address must be set to be used by
Deployment Manager in later steps.

31 / 41
The safer , easier way to help you pass any IT exams. 

Which IP address allocation policy should be selected?


A. Fixed
B. Transient
C. DHCP
D. No manual selection needed. The OVF template deployment automatically selects the correct IP
allocation policy.
Answer: A

160.Which host command, run as the boxmgmt user, is available from the 'Run Internal Command'
menu?
A. ssh
B. ls
C. rm
D. tracert
Answer: A

161.Which three methods are supported for sending SYR reports to EMC?
A. FTPS, SMTP, and ESRS
B. ESRS, FTP, and SMTP
C. SMTPS, FTPS, and ESRS
D. SMTP, HTTPS, and ESRS
Answer: A

162.Which three methods are supported for sending system alerts to EMC?
A. FTPS, SMTP, and ESRS
B. FTP, SMTP, and ESRS
C. SMTPS, FTPS, and ESRS
D. HTTPS, SMTP, and ESRS
Answer: A

163.During Consistency Group initialization, the host application experiences a performance impact.
What can be used to reduce the negative impact on performance?
A. I/O throttling
B. Detect bottlenecks
C. FC diagnostics
D. IP diagnostics
Answer: A

164.An administrator experiences a serious error with an RPA and calls EMC Support to resolve the issue.
They are concerned that the system did not automatically notify EMC Support via the ESRS gateway. You
check all settings in Unisphere Configure System Notification and find they are correct.
What is the most likely cause for this notification failure?
A. TCP port 25 blocked at their firewall
B. TCP port 989 blocked at their firewall

32 / 41
The safer , easier way to help you pass any IT exams. 

C. TCP port 990 blocked at their firewall


D. Temporary remote support license key expired
Answer: A

165.An environment consists of a two-RPA, single cluster. There are 74 Consistency Groups (CGs)
configured and replicating. The administrator asks you what impact an RPA failure would have.
What should you tell them?
A. All CGs will run on a single RPA.
B. The first 64 CGs will run on the single RPA, the others will be disabled.
C. The first 64 CGs will run on the single RPA, the others will be paused.
D. The 64 CGs with the highest priority will run on the single RPA.
Answer: A

166.An environment consists of a two-RPA, single cluster. There are 112 Consistency Groups (CGs)
configured and replicating. The administrator asks you what impact an RPA failure would have.
What should you tell them?
A. All CGs will run on a single RPA.
B. The first 64 CGs will run on the single RPA, the others will be disabled.
C. The first 64 CGs will run on the single RPA, the others will be paused.
D. The 64 CGs with the highest priority will run on the single RPA.
Answer: A

167.What is a quick way to determine if the required TCP ports for RecoverPoint are blocked?
A. Run the Ports Diagnostics test by connecting to an RPA as the boxmgmt user
B. Browse to the site management address and open Unisphere for RecoverPoint
C. Run the Port Diagnostics test by connecting to an RPA as the admin user
D. Run the Port Diagnostics test by connecting to an RPA as the security-admin user
Answer: A

168.What occurs in a RecoverPoint system during a High Load event?


A. It keeps tracking I/O in marking mode.
B. It saves I/O in the production journal.
C. It saves I/O in the remote journal.
D. It does not track or journal I/O.
Answer: A

169.Which drop-down menu in Unisphere for RecoverPoint would you use to navigate to ‘Collect System
Information’?
A. Admin
B. Event Logs
C. Dashboard
D. Support
Answer: A

33 / 41
The safer , easier way to help you pass any IT exams. 

170.What collection period is automatically set when ‘Collect System Information’ is run from the ‘System
Events’ pane?
A. From 10 min. before to 10 min. after the selected event
B. From 30 min. before to 30 min. after the selected event
C. From 60 min. before to 60 min. after the selected event
D. The previous 24 hours
Answer: A

171.Your RecoverPoint system is configured to send EMC system alerts. To prevent an EMC SR from
being opened during a maintenance activity, what do you need to do?
A. Uncheck the ‘Enable System Notification’ box
B. Call EMC support and tell them you are conducting maintenance
C. Uncheck the ‘Enable System Alerts’ box
D. Add an event filter
Answer: A

172.A customer has added VPLEX to an existing RecoverPoint system. When configuring journals for a
new Consistency Group they note that VPLEX Distributed Volumes are available.
Why are Distributed Volumes available?
A. Certificates were not created when installing the VPLEX splitter.
B. This is not a problem; you can tell the customer to use them.
C. The VPLEX is not running GeoSynchrony code 5.1.
D. The VPLEX Distributed Volume should not be in the RPA Storage View.
Answer: A

173.RecoverPoint support has asked you to collect logs from your RecoverPoint system.
After the log collection process is complete, what URL do you use to access the log file for download?
A. https://[RPA IP address]/info
B. https://[RPA IP address]/webdownload
C. https://[RPA IP address]/logs
D. https://[RPA IP address]
Answer: A

174.RecoverPoint support has asked you to collect logs from your RecoverPoint system.
After the log collection process is complete, which user account is used to access the log file for
download?
A. admin
B. webdownload
C. boxmgmt
D. security-admin
Answer: A

175.A company has a RecoverPoint cluster in a remote replication environment that has several
Consistency Groups. The Consistency Groups are constantly going into High Load. After reviewing the

34 / 41
The safer , easier way to help you pass any IT exams. 

Unisphere for RecoverPoint event log, you see the following event: Journal is unable to handle the
incoming data rate
What should you review to identify the problem?
A. Storage array performance of the remote site
B. Storage array performance of the source site
C. WAN link utilization
D. RecoverPoint appliance performance of the source site
Answer: A

176.A Consistency Group is experiencing High Load twice a day in a RecoverPoint remote replication
environment.
What is a possible reason for the High Load to occur on the Consistency Group?
A. Slow-performing journal volume at the remote copy cluster
B. Large amount of reads coming from the local source volumes
C. Slow-performing repository at the local cluster
D. Slow-performing repository at the remote cluster
Answer: A

177.You ran Collect System Information from an RPA. However, you forgot where you specified to save
the logs on the FTP server.
What is the recommended way to retrieve the logs?
A. Use http:// <RPA mgmt IP> /info
B. Re-run Collect System Information from the RPAs
C. Re-run Collect System Information from the GUI
D. Use ftp:// <RPA mgmt IP>
Answer: A

178.Which RecoverPoint tool will recommend the preferred RPA you should assign to each Consistency
Group?
A. Balance Load
B. Detect Bottlenecks
C. Collect System Information
D. Manage Event Filters
Answer: A

179.Which RecoverPoint tool will give you an overview of the system state, based on the system’s long
term statistics?
A. Detect Bottlenecks
B. Balance Load
C. Collect System Information
D. Manage Event Filters
Answer: A

180.What Installation Manager menu selections would you make to view the VNX iSCSI ports?

35 / 41
The safer , easier way to help you pass any IT exams. 

A. 3 - Diagnostics > 2 - SAN diagnostics > 2 - View RPA ports


B. 3 - Diagnostics > 1 - IP diagnostics > 2 - View IP details
C. 3 - Diagnostics > 2 - SAN diagnostics > 3 - View target LUNs
D. 3 - Diagnostics > 1 - IP diagnostics > 6 - System connectivity
Answer: A

181.What Installation Manager menu selections would you make to view the RPA PWWNs?
A. 3 - Diagnostics > 2 - SAN diagnostics > 2 - View RPA ports
B. 3 - Diagnostics > 1 - IP diagnostics > 2 - View IP details
C. 3 - Diagnostics > 2 - SAN diagnostics > 3 - View target LUNs
D. 3 - Diagnostics > 1 - IP diagnostics > 6 - System connectivity
Answer: A

182.Which tool do you need in order to run the save_settings command from a Windows command
prompt?
A. PLink
B. PuTTY
C. CuteFTP
D. WinSCP
Answer: A

183.A company has just installed a RecoverPoint solution and configured it with two clusters.
Which command will monitor system performance for both sites?
A. export_statistics
B. netstat -a
C. balance_load D. config_io_throttling
Answer: A

184.What are the three potential bottlenecks that can cause a RecoverPoint Consistency Group to go into
High Load?
A. WAN bandwidth, remote storage performance, and RPA performance
B. RPA performance, splitter overhead, and SAN latency
C. WAN bandwidth, SAN latency, and host performance
D. Host performance, splitter overhead, and WAN bandwidth
Answer: A

185.Which RecoverPoint CLI command would you run to get the errors and warnings for one cluster or for
the entire environment?
A. get_system_status
B. get_rpa_states
C. get_groups
D. get_clusters_topology
Answer: A

36 / 41
The safer , easier way to help you pass any IT exams. 

186.After running a log collection, which user should you log in as to download the output file?
A. admin
B. monitor
C. boxmgmt
D. security-admin
Answer: A

187.Which IP diagnostic command is used to test the IP connectivity performance between RPAs when
the 'Test Throughput' option is chosen in the RPA interface?
A. iperf
B. top
C. ethtool
D. netstat
Answer: A

188.You are concerned about the performance of the RecoverPoint replication. Some of the Consistency
Groups continue to go into High Load. Initial troubleshooting points to a data compression issue.
Which command will determine if compression is set too high?
A. detect_bottlenecks
B. get_events_log
C. top
D. config_io_throttling
Answer: A

189.Which command displays RPA hardware platform information?


A. get_rpa_states
B. get_system_status
C. get_system_settings
D. get_rpa_statistics
Answer: A

190.In a six RPA cluster, RPA 2 is hosting a Consistency Group with only a local copy. It is frequently
reporting High Load Events.
What would you do to troubleshoot this issue?
A. Use the Balance Load feature
B. In Installation Manager, use Diagnostics > IP Diagnostics >Test throughput
C. Increase the production journal size
D. Change the RPO of the affected Consistency Group
Answer: A

191.Which RecoverPoint volume type stores information about the cluster and must be accessible by all
RPAs?
A. Repository
B. Production Journal

37 / 41
The safer , easier way to help you pass any IT exams. 

C. Replicas
D. Copy Journal
Answer: D

192.You have configured replication using a local and remote copy. After a data corruption event, you
decide to restore production from a point-in-time image of the local copy.
What must be considered before restoring the volume?
A. Remote replication is paused during the restore
B. Journal history at both sites will be lost
C. Consistency Group will be disabled
D. Production journal must be restored
Answer: C

193.A company believes their WAN IP network has performance problems.


Which IP diagnostic tool can be used to confirm this issue?
A. Test Throughput
B. Port diagnostics
C. Full mesh network test
D. View Routing Table
Answer: C

194.During a failover event, you have determined that the last bookmark had corrupted data.
What is the fastest way to find the last good replica?
A. Fail back to the primary and create a new replica
B. Complete the failover and restore the data from the local backup
C. Create a new bookmark and use the Test a Copy wizard
D. Move to the previous point in time
Answer: A

195.A administrator wants to add a new RecoverPoint UserID.


Which role must their UserID belong to in order to manage user settings?
A. security
B. admin
C. boxmgmt
D. monitor
Answer: D

196.Which write splitter type allows host connectivity to production LUNs with either iSCSI or FC?
A. VNX
B. VPLEX
C. VMAX
D. SanTap
Answer: D

38 / 41
The safer , easier way to help you pass any IT exams. 

197.Refer to the exhibit.

A customer is implementing a RecoverPoint solution with a two-node cluster.


What is represented by the 'A' in the exhibit?
A. WAN
B. LAN
C. iSCSI
D. Floating IP
Answer: A

198.Refer to the exhibit.

In Unisphere for RecoverPoint, the status tab diagram of a particular Consistency Group shows two
copies linked by a dashed green line on top of a solid green line.
What type of link is this?
A. Synchronous
B. Asynchronous
C. Fibre Channel
D. iSCSI
Answer: A

39 / 41
The safer , easier way to help you pass any IT exams. 

199.Refer to the exhibit.

A RecoverPoint cluster with two RPAs and VPLEX splitter has been deployed. When you run the rp
validate-configuration VPLEX CLI command, the error shown in the exhibit is displayed.
What is the most likely cause of this error?
A. Only two initiators per RPA have been used.
B. The RPAs are not zoned to the VPLEX BE ports.
C. One of the two RPAs is missing.
D. The RPAs are not zoned to the VPLEX FE ports.
Answer: A

200.Refer to the exhibit.

A storage administrator wants to protect their distributed VPLEX volumes using RecoverPoint and the
VPLEX splitter. The admin asks if there are special considerations they must be aware of.
What should you tell the admin?
A. The VPLEX Consistency Group that is protected by RecoverPoint must have its site preference set to
Site B.
B. RecoverPoint does not support replication of distributed VPLEX devices.
C. Only VPLEX devices at Site B can be replicated using RecoverPoint.

40 / 41
The safer , easier way to help you pass any IT exams. 

D. All VPLEX devices at both sites can be protected using RecoverPoint, regardless of whether they are
local or distributed.
Answer: A

41 / 41

You might also like