9/1/2020 Reset Procedures

Reset Procedures
What is the Reset for ... Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

AccuMap Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the UP & DOWN
key arrow keys
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when TEST
the unit powers up MENU appears
5. Advance cursor to FINAL SETUP,
press EXIT, then ENTER to exit mode
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

AccuMap 12 Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the MODE 2. Press and hold the UP & DOWN
(or PAGES) key arrow keys
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when TEST
the unit powers up MENU appears
5. Advance cursor to FINAL SETUP,
press EXIT, then ENTER to exit mode
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

AccuMap Sport Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the MODE 2. Press and hold the UP & DOWN
(or PAGES) key arrow keys
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when TEST
the unit powers up MENU appears
5. Advance cursor to FINAL SETUP,
press EXIT, then ENTER to exit mode
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

AccuNav Sport Reset 1. Press the ON button 1. Turn unit OFF

2. Press POS button 2. Press and hold F4 key

3. Turn Menu 3. Press the ON key

4. Press Right Arrow twice 4. Release both buttons when diagonal

www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 1/16
9/1/2020 Reset Procedures

lines appear
5. Press F5 (preset unit) 5. Press the CLR key to return to
normal screen

Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

Accura Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the CLR 2. Press and hold the upper left hand
key corner key
3. Turn unit ON 3. Turn unit ON

4. Release both buttons when 4. A test screen appears

unit powers up
5. Release upper left hand corner key

6. Press the CLR key

7. Shut unit off

Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

Accura 240 Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the EXIT 2. Press and hold the LEFT & RIGHT
key arrow keys
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when unit
the unit powers up powers up
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

Cuda 128 Reset 1. Turn unit OFF - Press and hold the
up arrow key.
2. Press power, unit will enter
keyboard test mode.
3. Release up arrow key.

4. Press PWR/clear key 7 times.

(System Info Screen)
5. press MENU/DOWN and unit will
shut off.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

Cuda 128P Reset 1. Turn unit OFF - Press and hold the
up arrow key.
2. Press power key. Unit will enter
keyboard test mode.
www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 2/16
9/1/2020 Reset Procedures

3. Release up arrow key.

4. Press PWR/clear key 7 times.

(System Info Screen)
5. press MENU/DOWN and unit will
shut off.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

Cuda 168 Reset 1. Turn unit OFF - Press and hold the
up arrow key.
2. Press power key. Unit will enter
keyboard test mode.
3. Release up arrow key.

4. Press Menu up or down key one

time

5. Press PWR/clear key 7 times. Unit

will show system info screen.
6. Press MENU/DOWN key and unit
will shut off.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

Cuda 168EX Reset 1. Turn unit OFF - Press and hold the
up arrow key.
2. Press power, unit will enter
keyboard production test mode.
3. Release up arrow.

4. Press PWR/clear key 7 times.

(System Info Screen)
5. press MENU/DOWN and unit will
shut off.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

Cuda 240 Reset 1. Turn unit off 1. Turn unit OFF - Press and hold the
down arrow key.
2. Press and hold the pages 2. Press power, unit will enter
and power keys production test mode.
3. When the alarm box 3. Press exit key 7 times. (System Info
appears, release the keys Screen)
4. press the Z out key and unit will shut
off.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

Cuda 242 Reset 1. Turn unit OFF - Press and hold the
up arrow key.
2. Press power, unit will enter
production keyboard test mode.
3. Release up arrow.

www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 3/16
9/1/2020 Reset Procedures

4. Press PWR/clear key 7 times.

(System Info Screen)
5. press MENU/DOWN and unit will
shut off.
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

Cuda 250 Reset 1. Turn unit off 1. Turn unit OFF - Press and hold the
down arrow key.
2. Press and hold the pages 2. Press power, unit will enter
and power keys production test mode.
3. When the alarm box 3. Press exit key 7 times. (System Info
appears, release the keys Screen)
4. press the Z out key and unit will shut
off.
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

Eagle Map Guide Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the MODE 2. Press and hold the UP & DOWN
(or PAGES) key arrow keys
3. Press and release the 3. Press and hold the PWR key
PWR key
4. Release PAGES key when 4. Release both buttons when TEST
the unit completely powers up MENU appears
5. Advance cursor to FINAL SETUP,
press EXIT, then ENTER to exit mode
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

Eagle Map Guide Pro Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the MODE 2. Press and hold the UP & DOWN
(or PAGES) key arrow keys
3. Press and release the 3. Press and hold the PWR key
PWR key
4. Release PAGES key when 4. Release both buttons when TEST
the unit completely powers up MENU appears
5. Advance cursor to FINAL SETUP,
press EXIT, then ENTER to exit mode
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

EagleView Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the MODE 2. Press and hold the UP & DOWN
(or PAGES) key arrow keys
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when TEST
the unit powers up MENU appears
5. Advance cursor to FINAL SETUP,
press EXIT, then ENTER to exit mode

www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 4/16
9/1/2020 Reset Procedures

Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

EGC 12W Reset N/A N/A

Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

Eagle Expedition Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the MODE 2. Press and hold the UP & DOWN
(or PAGES) key arrow keys
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when TEST
the unit powers up MENU appears
5. Advance cursor to FINAL SETUP,
press EXIT, then ENTER to exit mode
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

Eagle Expedition II Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the MODE 2. Press and hold the UP & DOWN
(or PAGES) key arrow keys
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when TEST
the unit powers up MENU appears
5. Advance cursor to FINAL SETUP,
press EXIT, then ENTER to exit mode
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

Eagle Explorer Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the MODE 2. Press and hold the UP & DOWN
(or PAGES) key arrow keys
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when TEST
the unit powers up MENU appears
5. Advance cursor to FINAL SETUP,
press the Right Arrow Key and the unit
will shut itself off.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishEasy Reset N/A N/A

Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishEasy Portable Reset N/A N/A

Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 5/16
9/1/2020 Reset Procedures

FishEasy 2 Reset 1. Turn the unit OFF

2. Press and hold the UP arrow key.

FishEasy 2 T Reset 3. Press and hold the PWR key.

4. Production test mode will appear.

5. Press clear 5 times and you will see

System Info Screen
6. Press MENU/DOWN and the unit
will shut off
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishEasy 240 Reset 1. Turn unit off 1. Turn unit OFF - Press and hold up
arrow key
2. Press and hold the down 2. Press power, unit will enter
arrow and power keys production test mode.
3. When the alarm box 3. Release both keys when the test
appears, release the keys menu appears.
4. Press exit key 5 times. (System Info
Screen)
5. Press the Menu Down key and unit
will shut off.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishEasy 245 DS Reset 1. Turn unit OFF - Press and hold up

arrow key
2. Press power, unit will enter
production test mode.
3. Release both keys when the test
menu appears.
4. Press PWR/Clear key 7 times.
(System Info Screen appears)
5. Press the Menu Down key and unit
will shut off.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishEasy 250 DS Reset 1. Turn unit OFF - Press and hold up

arrow key
2. Press power, unit will enter
production test mode.
3. Release both keys when the test
menu appears.
4. Press exit key 5 times. (System Info
Screen)
5. Press the Menu Down key and unit
will shut off.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishEasy 320C Reset 1. Turn unit OFF - Press and hold the
www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 6/16
9/1/2020 Reset Procedures

down arrow key.

2. Press power, unit will enter
production test mode.
3. Press exit key 5 times.

4. press ENTER/PAGES and unit will

shut off.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishEasy ST Reset N/A N/A

Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

FishElite 320 Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the EXIT 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the unit
the unit powers up to Full powers up to Full Map Screen
Map Screen
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

FishElite 480 Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the unit
the unit powers up to Full powers up to Full Map Screen
Map Screen
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

FishElite 500C Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the unit
the unit powers up to Full powers up to Full Map Screen
Map Screen
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

FishElite 502C Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the unit

www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 7/16
9/1/2020 Reset Procedures

the unit powers up to Full powers up to Full Map Screen

Map Screen
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

FishElite 640C Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the unit
the unit powers up to Full powers up to Full Map Screen
Map Screen
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

FishElite 642C Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the unit
the unit powers up to Full powers up to Full Map Screen
Map Screen
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishID 128 Reset N/A N/A

Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishID 128 Portable Reset N/A N/A

Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishMark 160 Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the EXIT 2. Press and hold the Menu Key
key
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when LCD
the unit powers up test mode appears. Press Exit
5. Press Exit to remove the split screen

6. turn the unit off.

Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishMark 240 Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the EXIT 2. Press and hold the Menu Key
key
3. Press and hold the PWR 3. Press and hold the PWR key

www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 8/16
9/1/2020 Reset Procedures

key
4. Release both buttons when 4. Release both buttons when LCD
the unit powers up test mode appears. Press Exit
5. Press Exit to remove the split screen

6. turn the unit off.

Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishMark 320 Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the unit
the unit powers up beeps.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishMark 480 Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the unit
the unit powers up beeps.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishMark 500C Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the EXIT 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the unit
the unit powers up beeps.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

FishMark 640C Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the EXIT 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the unit
the unit powers up beeps.
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

FishStrike 1000C Reset 1. Turn unit OFF 1. Turn unit OFF

www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 9/16
9/1/2020 Reset Procedures

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the USA
the USA map appears map appears

Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

IntelliMap 320 Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the EXIT 2. Press and hold the ZIN&ZOUT Keys
key at the same time

3. Press and hold the PWR 3. Press and hold the PWR key
key

4. Release both buttons when 4. Release both buttons when the Full
the Full Map Screen appears. Map Screen appears.

Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

IntelliMap 480 Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the Full
the Full Map Screen appears. Map Screen appears.
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

IntelliMap 500C Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the Full
the Full Map Screen appears. Map Screen appears.
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

IntelliMap 502C iGPS Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the Full
the Full Map Screen appears. Map Screen appears.
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 10/16
9/1/2020 Reset Procedures

GPS Data) Data such as Waypoints and trails)

IntelliMap 640C Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the Full
the Full Map Screen appears. Map Screen appears.

Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

IntelliMap 642C iGPS Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the Full
the Full Map Screen appears. Map Screen appears.
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

Journey Reset 1. Turn unit OFF 1. Turn unit off

2. Press and hold the MODE 2. Press and hold the UP & DOWN
(or PAGES) key arrow keys
3. Press and release the 3. Press and hold the PWR key
PWR key
4. Release PAGES key when 4. Release both buttons when TEST
the unit completely powers up MENU appears
5. Advance cursor to FINAL SETUP,
press EXIT, then ENTER to exit mode
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

Optima Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the EXIT 2. Press and hold the LEFT & RIGHT
key arrow keys
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when unit
the unit powers up powers up
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

SeaChamp 1000C DF Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the USA
the USA map appears map appears

www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 11/16
9/1/2020 Reset Procedures

Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

SeaChamp 2000C DF Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the USA
the USA map appears map appears
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

SeaCharter 320DF Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the EXIT 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the USA
the USA map appears map appears
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

SeaCharter 480DF Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the USA
the USA map appears map appears
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

SeaCharter 500C DF Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the USA
the USA map appears map appears
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

SeaCharter 502C DF iGPS Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the USA
the USA map appears map appears
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 12/16
9/1/2020 Reset Procedures

GPS Data) Data such as Waypoints and trails)

SeaCharter 640C DF Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the USA
the USA map appears map appears

Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

SeaCharter 642C DF iGPS Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the USA
the USA map appears map appears
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

SeaFinder 240 DF Reset . 1. Turn the unit OFF

2. Press and hold the UP arrow key.

3. Press and hold the PWR key.

4. Production test mode will appear.

5. Press clear 5 times and you will see

System Info Screen
6. Press MENU/DOWN and the unit
will shut off
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

SeaFinder 245 DS Reset . 1. Turn the unit OFF

2. Press and hold the UP arrow key.

3. Press and hold the PWR key.

Production test mode will appear.
4. Release both keys when the test
menu appears.
5. Press PWR/CLEAR 7 times and you
will see the System Info Screen.
6. Press MENU/DOWN and the unit
will shut off
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

SeaFinder 250 DF Reset . 1. Turn the unit OFF

2. Press and hold the UP arrow key.

www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 13/16
9/1/2020 Reset Procedures

3. Press and hold the PWR key.

4. Production test mode will appear.

5. Press clear 5 times and you will see

System Info Screen
6. Press MENU/DOWN and the unit
will shut off

Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

SeaFinder 320 DF Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the EXIT 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the unit
the unit powers up beeps.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

SeaFinder 480 DF Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the unit
the unit powers up beeps.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

SeaFinder 500C DF Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the unit
the unit powers up beeps.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

SeaFinder 640C DF Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the PAGES 2. Press and hold the ZIN&ZOUT Keys
key at the same time
3. Press and hold the PWR 3. Press and hold the PWR key
key
4. Release both buttons when 4. Release both buttons when the unit
the unit powers up beeps.
Soft Reset (Does not delete Hard Reset (Deletes stored data)

GPS Data)

www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 14/16
9/1/2020 Reset Procedures

Status Reset 1. Turn unit OFF 1. Turn unit off

2. Press and hold the MODE 2. Press and hold the UP & DOWN
(or PAGES) key arrow keys
3. Press and release the 3. Press and hold the PWR key
PWR key
4. Release PAGES key when 4. Release both buttons when TEST
the unit completely powers up MENU appears
5. Advance cursor to FINAL SETUP,
press EXIT, then ENTER to exit mode
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

Strata 128 Reset N/A N/A

Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

Strata 128 Portable Reset N/A N/A

Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

StrataView 128 Reset N/A N/A

Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

StrataView 128 Plus Reset N/A N/A

Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

TriFinder N/A N/A

Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

TriFinder 2 1. Turn the unit OFF

2. Press and hold the UP arrow key.

3. Press and hold the PWR key.

4. Production test mode will appear.

5. Press clear 5 times and you will see

System Info Screen
6. Press MENU/DOWN and the unit
will shut off
Soft Reset (Does not delete Hard Reset (Deletes stored data)

Data)

Ultra Classic Reset 1. Turn unit OFF 1. Turn unit OFF

2. Press and hold the EXIT 2. Press and hold the LEFT & RIGHT
key arrow keys
3. Press and hold the PWR 3. Press and hold the PWR key
www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 15/16
9/1/2020 Reset Procedures

key
4. Release both buttons when 4. Release both buttons when unit
the unit powers up powers up
Soft Reset (Does not delete Hard Reset (Deletes stored GPS

GPS Data) Data such as Waypoints and trails)

UltraMap Reset 1. Turn unit OFF 1. Turn unit off

2. Press and hold the MODE 2. Press and hold the UP & DOWN
(or PAGES) key arrow keys
3. Press and release the 3. Press and hold the PWR key
PWR key
4. Release PAGES key when 4. Release both buttons when TEST
the unit completely powers up MENU appears
5. Advance cursor to FINAL SETUP,
press EXIT, then ENTER to exit mode

Copyright © 2016 Navico

>>
>> javascript:; >> javascript:;

www.eaglenav.com/Support/Troubleshooting-Guide/Reset-Procedures/ 16/16