Pipe Fitting Accessories: Import Price List

IMPORT PRICE LIST
PIPE FITTING ACCESSORIES

EFFECTIVE JANUARY 14, 2019
version: IMP-ACC-UPL.19.01 EFFECTIVE: JANUARY 14, 2019

(SUPERSEDES ALL PREVIOUS PRICING)
CORONA CALL CENTER (U.S.) HOUSTON CALL CENTER (U.S.) CAMBRIDGE CALL CENTER (CANADA)
Toll Free: (877) 701-7827 Toll Free: (800) 999-3009 Toll Free: (888) 893-7827
Fax: (951) 898-9561 Fax: (281) 558-9000 Fax: (519) 650-1553
Star Pipe Products Corporate Headquarters

4018 Westhollow Parkway 800.999.3009 Toll Free
Houston, Texas 77082 281.558.3000 Telephone
www.starpipeproducts.com 281.558.9000 Fax
General Terms and Conditions
GENERAL Star Pipe Products’ (“Seller”) terms and conditions of sale (the “Terms”) shall control with respect to any sale of Seller’s
products (the “Goods”) to any customer (each, a “Buyer”) (each, an “Order”). No waiver, alteration or modification of
these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration
or modification is specifically accepted in writing and signed by an authorized representative of Seller. Buyer acknowl-
edges that these Terms and Conditions are subject to change from time to time and the parties agree that each sale
of Goods will be independently governed by the version of the Terms available online at www.starpipeproducts.com at
the time of acceptance by Seller such order. All references by Seller to Buyer’s specifications and similar requirements
are only to describe Goods and work covered hereby and no warranties or other terms will have any force or effect.
Buyer may not rely on any representation, promise or term not set forth herein and Seller expressly objects to and rejects
all terms not contained in these Terms. Seller’s acceptance of an Order, whether oral or written, and/or its delivery of
Goods to Buyer is based on the express condition that Buyer agrees to all of these Terms.
GOVERNING LAW; These Terms (and every Order) shall be deemed made under and governed by the laws of the State of Texas and shall
VENUE be construed and enforced in accordance therewith (without regard to its rules respecting conflicts of Law). Buyer
irrevocably submits to the jurisdiction and venue of the state and federal courts located in Harris County, State of Texas,
hereby waives any objections or defenses to such forum jurisdiction and venue selection, and agrees and consents that
service of process may be made upon it in any legal proceeding relating to these Terms by any means allowed under
Texas or federal law. No party shall have the right to litigate, include in any lawsuit, or otherwise present claims for any
other person or entity or for any class of persons or entities, and each party waives any such rights or claims it might have.
QUOTATIONS Where Seller issues a quotation to place a bid, Seller’s quotation is for prompt acceptance (not later than 30 days)
and Seller reserves the right to modify and/or withdraw such quotation without notice. Buyer’s prompt acceptance
of the quotation and these Terms are material terms of the quotation and any resulting Order. In cases where freight
allowance is included in the quotation, Buyer shall be liable for any rate increase and/or additional expense over the
calculated allowance resulting from compliance with Buyer’s shipping instructions.
DELIVERY Seller will make every effort to complete delivery of Goods as indicated on an Order, but Seller shall have no responsibil-
ity or liability, and will accept no back charge, for losses or damages arising from delivery delays or failure to give notice
of expected delay. Seller may terminate any Order without liability of any nature, by written notice to Buyer, in the event
that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of longer
than sixty (60) days.
WARRANTY Seller warrants Goods of its own manufacture for one (1) calendar year from the date of shipment shall conform to the
material and technical specifications set forth in the Order. Goods manufactured by others are sold “as is” except to the
extent the manufacturer honors any applicable warranty made by the manufacturer. Secondhand goods are sold “as
is”. If the new Goods fail to conform with such specifications upon inspection by Seller, Seller will, at its option and as Buy-
er’s sole remedy, either repair or replace such Goods having defects in material or workmanship with the type originally
furnished. Seller shall not be liable or responsible and Seller’s warranty obligations shall not apply if (A) upon inspection
any defects are attributed to normal wear and tear, erosion or corrosion, improper storage, use or maintenance or use
of Goods with incompatible products, (B) the defect is in any portion or part of Goods not manufactured by Seller, (C)
Goods have been repaired or altered outside of Seller’s factory, in any manner; (D) Goods have been subjected to
misuse, negligence or accidents; or (E) Goods have been used in a manner contrary to Seller’s instructions or recom-
mendations. If (B) above is applicable, Seller will, as an accommodation to Buyer, assign to Buyer any warranties given
to it by any such other manufacturers; provided, however, that the foregoing will not extend Seller’s warranty to any
accessory products unless otherwise agreed to in writing by Seller. If Seller’s examination shall disclose to its satisfaction
that the Good is defective, cannot be replaced and an adjustment is required, the amount of such adjustment shall not
exceed the net line item sales price of the defective Good only and no allowance will be made for labor or expense
of repairing or replacing defective Good or workmanship or damage resulting from the same. No adjustment shall be
implemented unless the Good in question is returned to Seller in its originally installed condition, still connected to other
components of the joint. Buyer must contact Seller as quickly as possible so Seller can assess the Good in its installed
condition. No claims will be honored unless claim is made within forty-five (45) days of the defect being discovered.
Where engineering design or fabrication work is supplied, Buyer’s acceptance of Seller’s design or of delivery of work
shall relieve Seller of all further obligation for such servicess. THIS CLAUSE CONTAINS SELLER’S SOLE WARRANTY. SELLER
MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED
BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any
other obligation in connection with the sale of its engineering designs or Goods. Seller shall not be responsible for design
errors due to inaccurate or incomplete information supplied by Buyer or its representatives. This warranty is non-transfer-
able.
LIABILITY Seller shall not be liable for any loss, damage, cost of repairs, labor costs, special, incidental or consequential damages
of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above),
contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the Goods or of the
engineering designs supplied to Buyer. IN NO EVENT SHALL SELLER’S AGGREGATE LIABILITY ARISING OUT OF OR RELATED
TO ANY ORDER ISSUED PURSUANT TO ANY ORDER, WHETHER ARISING OUT OF OR RELATED TO BREACH OF CONTRACT,
TORT (INCLUDING NEGLIGENCE OF ANY KIND) OR OTHERWISE, EXCEED THE LINE ITEM PRICE OF THE GOOD(S) GIVING RISE
TO THE CLAIM OR $10,000 USD, WHICHEVER IS LESS.
(Continued)
GTCREV030119
STAR® PIPE PRODUCTS
HOUSTON CORPORATE
TOLL FREE 1-800-999-3009 FAX 281-558-9000
www.starpipeproducts.com
Page 2
General Terms and Conditions
DISCLAIMER (1) PER AWWA/ANSI C110 A21.10, THE FLANGED JOINT IS GENERALLY SPECIFIED FOR ABOVE GROUND SERVICE. UNDER-
GROUND USE OF THE FLANGED JOINT IS GENERALLY NOT DESIRABLE DUE TO THE RIGIDITY OF THE JOINT. (2) SELLER WILL
NOT PROVIDE WARRANTY FOR OR BE RESPONSIBLE FOR THE REPAIR OR REPLACEMENT OF GOOD DAMAGED BY PRES-
SURE JETTING OF ANY KIND, REGARDLESS OF AGE OR CAUSE.
RETURNS Seller will not accept return of any Good(s) unless Seller’s written permission has been first obtained, in which case the
Goods will be credited subject to the following: (a) All material returned must, on its arrival at Seller’s plant, be found
to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b)
A handling charge deduction of twenty-five percent (25%) will be made from all credit memoranda issued for material
returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda.
SHIPMENTS All Goods sent out will be carefully examined, counted and packed. The cost of any special packing or special han-
dling caused by Buyer’s requirements or requests shall be added to the amount of the Order. No claim for shortages
will be allowed unless made in writing within ten (10) days of receipt of a shipment. Claims for Goods damaged or lost
in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.
GOODS Orders covering special, made-to-order, rush or non-standard Goods are not subject to cancellation except on such
terms as Seller may specify on application.
PRICES All prices and designs are subject to change without notice. All prices are F.O.B. Point of Shipment, unless otherwise
stated.
FORCE MAJEURE Seller shall not be responsible or liable in any way for any failure to perform due to acts of God, fire, flood, serious
accidents, foreign or United States embargo, war or riot, serious shortages, unavailability or significant price increases
in commodities, materials or components, labor disputes, interruption of transportation, loss of essential production
services, laws, rules, regulations, instructions or acts of any U.S. or foreign governmental authority, or by any other event
beyond the reasonable control of Seller or its subcontractors.
TAXES The amount of any sales, excise or other taxes, if any, applicable to the Goods covered by this order, shall be added to
the purchase price and shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptable
to the taxing authorities.
MISCELLANEOUS Seller produces both domestic and import Goods and each are cast with country of origin. The responsibility lies with
the ordering and receiving parties to determine the suitability and origin of all Goods being requested. All Goods
should be installed per Seller’s installation instructions. Seller’s Terms always apply. Please contact Seller if either are
not readily available. All Domestic fittings are compliant with the Consolidated Appropriations Act of 2014 (AIS), the
Recovery and Reinvestment Act of 2009 (ARRA) and the Buy America Acts of 1983 and 1933. We offer two (2) types of
Domestic restraint Goods: (1) AIS Compliant and (2) Buy American Compliant.
(1) All Goods described as AIS Compliant meet all requirements of the American Iron and Steel provision of the
Consolidated Appropriations Act of 2014 (AIS), the Buy America Act of 1983 and the Buy American Act of 1933.
(2) Buy American Compliant Goods meet the original Federal Buy American Act of 1933. These Goods may in-
clude import components and this will be noted in the description of the Good.
Pressure Cleaning Guidelines: The Ductile Iron Pipe Research Association publishes the Installation Guide for Ductile
Iron Pipe. The following language comes from Chapter 7 of the February 2012 edition of this document: “The use of
pressure washing to clean the inside diameter of cement-mortar-lined iron pipe is not recommended due to the pos-
sibility of damage to the seal coat and/or cement-mortar lining. The aggressiveness of the pressure washing is depen-
dent on water pressure, travel speed, water jets, water jet angle to the lining, distance of the water jets from the lining,
diameter of pipe, type of lining application, etc. Any attempt to do so is at the sole risk of the equipment operator.”
Seller concurs with this position. Seller will not provide warranty for or be responsible for the repair or replacement of
Good damaged by pressure jetting of any kind.
Non-Pressure Sewer Applications: If a mandrel test is required, or if a particular inside diameter is needed in order to
accommodate CCTV equipment or some other tool, it is recommended that the installer check inside diameter com-
patibility by passing an object of the same size through the fitting prior to installation in order to ensure that the fitting’s
inside diameter is compatible with the test or inspection desired. Mandrels, CCTV equipment, testing balls, and any
other object passed through the fitting shall be constructed such that it does not damage the fitting’s lining when trans-
ported through it. Seller will not be responsible for buried sewer fittings that are incompatible with the aforementioned
objects if that inside diameter that has not been assessed prior to installation.
GTCREV030119
HOUSTON CORPORATE
TOLL FREE 1-800-999-3009 FAX 281-558-9000
Page 3
NOTES:
® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS

STAR PIPE PRODUCTS
HOUSTON CORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000
Page 4
Price List
Import Pipe Fitting Accessories ACCESSORIES
IMP-ACC-UPL1901
TABLE OF CONTENTS
General Terms & Conditions pg. 2-3

UTILITY PIPE FITTINGS ACCESSORIES
MJ Glands pg. 6-7
Pre-Packaged MJ Accessories pg. 7-11
MJ /Push-On Gaskets pg. 11-12
MJ Bolts & Nuts pg. 12-13

(T-head, Pigtail, Anti-Rotational, HLSA, Blue, Stainless Steel)

HOUSTON CORPORATE
Page 5 TOLL FREE 1-800-999-3009 FAX 281-558-9000
Price List
IMP-ACC-UPL1901 Size Item Code Weight Crate Qty List Price
(inches) (lbs.)
DUCTILE IRON MJ GLAND - COMPACT

SIZE ITEM CODE WT QTY LIST PRICE
2 MJG02 3 1000 $8.00
3 MJG03 3 600 $9.00
4 MJG04 3 500 $16.00
6 MJG06 5 360 $18.00
8 MJG08 6 270 $23.00
10 MJG10 8 180 $36.00
12 MJG12 9 120 $37.00
14 MJG14 13 64 $59.00
16 MJG16 17 50 $59.00
18 MJG18 30 20 $97.00
20 MJG20 35 20 $138.00
24 MJG24 50 20 $205.00
30 MJG30 85 10 $299.00
36 MJG36 115 10 $513.00
42 MJG42 143 10 $803.00
48 MJG48 237 10 $1,114.00
DUCTILE IRON MJ GLAND (OVERSIZED) - COMPACT

4 MJGO04 5 300 $18.00
6 MJGO06 6 360 $23.00
8 MJGO08 7 200 $26.00
10 MJGO10 10 124 $36.00
12 MJGO12 12 120 $42.00
16 MJGO16 18 50 $106.00
DUCTILE IRON MJ SWIVEL GLAND - COMPACT

4 MJGS04 7 100 $62.00
6 MJGS06 8 100 $69.00
8 MJGS08 10 100 $82.00
12 MJGS12 12 50 $216.00
DUCTILE IRON MJ GLAND - FULL BODY

2 MJG02** 3 500 $8.00
3 MJDG03 5 360 $16.00
4 MJDG04 6 288 $25.00
6 MJDG06 10 216 $39.00
8 MJDG08 14 80 $57.00
10 MJDG10 20 72 $68.00
12 MJDG12 24 72 $92.00
14 MJDG14 45 64 $120.00
16 MJDG16 55 30 $189.00
18 MJDG18 55 30 $272.00
20 MJDG20 66 30 $367.00
24 MJDG24 90 20 $440.00
30 MJDG30 220 10 $849.00
36 MJDG36 286 10 $1,168.00
42 MJDG42 288 10 $1,553.00
48 MJDG48 400 10 $1,905.00
**C153

HOUSTON CORPORATE
Price List
(inches) (lbs.)
OPCION 2 Y 3 HEAVY DUTY RETAINER GLANDS

ARO SIZE ITEM CODE WT QTY LIST PRICE
3 MJRGHD03 3 224 $28.00
4 MJRGHD04 5 224 $30.00
6 MJRGHD06 9 180 $54.00
8 MJRGHD08 12 162 $62.00
10 MJRGHD10 17 64 $108.00
12 MJRGHD12 20 64 $152.00
14 MJRGHD14 38 52 $189.00
16 MJRGHD16 42 52 $213.00
18 MJRGHD18 49 26 $369.00
20 MJRGHD20 60 26 $393.00
24 MJRGHD24 80 12 $690.00
30 MJRGHD30 162 9 $1,638.00
36 MJRGHD36 196 8 $1,889.00
GLAND PACK - COMPACT

MJ GLAND, MJ GASKET & T-HEAD BOLTS & NUTS
2 MJGP02 5 360 $26.00
3 MJGP03 5 360 $26.00
4 MJGP04 7 360 $34.00
6 MJGP06 10 204 $47.00
8 MJGP08 12 175 $52.00
10 MJGP10 16 108 $75.00
12 MJGP12 17 72 $78.00
14 MJGP14 24 60 $119.00
16 MJGP16 30 60 $127.00
18 MJGP18 45 56 $164.00
20 MJGP20 60 40 $227.00
24 MJGP24 70 40 $317.00
30 MJGP30 123 1 $566.00
36 MJGP36 161 1 $826.00
42 MJGP42 296 1 $1,419.00
48 MJGP48 340 1 $1,807.00
LONGER BOLT - GLAND PACK - COMPACT

MJ GLAND, MJ GASKET & LONGER T-HEAD BOLTS & NUTS
3 MJGP03W/3.5 5 360 $29.00
4 MJGP04W/4B 7 360 $36.00
6 MJGP06W/4B 10 204 $48.00
8 MJGP08W/4B 12 175 $55.00
10 MJGP10W/4.5B 16 108 $77.00
12 MJGP12W/4.5B 17 72 $80.00
14 MJGP14W/5B 25 60 $127.00
16 MJGP16W/5B 31 60 $133.00
18 MJGP18W/5 46 56 $218.00
20 MJGP20W/5 61 40 $233.00

HOUSTON CORPORATE
Price List
(inches) (lbs.)
TRANSITION GLAND PACK - COMPACT

MJ GLAND, MJ TRANSITION GASKET & T-HEAD BOLTS & NUTS
2 MJGPT02 6 360 $29.00
3 MJGPT03 7 360 $27.00
4 MJGPT04 8 360 $36.00
6 MJGPT06 12 204 $48.00
8 MJGPT08 15 175 $55.00
10 MJGPT10 20 108 $77.00
12 MJGPT12 25 72 $79.00
GLAND PACK WITH STAR BLUE BOLTS - COMPACT

MJ GLAND, MJ GASKET WITH FLUOROPOLYMER COATED T-HEAD BOLTS & NUTS
3 MJGPCB03 7 360 $48.00
4 MJGPCB04 8 300 $57.00
6 MJGPCB06 12 204 $76.00
8 MJGPCB08 15 175 $79.00
10 MJGPCB10 20 108 $116.00
12 MJGPCB12 25 72 $122.00
14 MJGPCB14 35 1 $199.00
16 MJGPCB16 42 1 $213.00
18 MJGPCB18 46 1 $342.00
20 MJGPCB20 61 1 $372.00
24 MJGPCB24 70 1 $452.00
VALVE PACK - COMPACT

MJ GLAND, MJ GASKET WITH ANTI-ROTATIONAL BOLTS & NUTS
2 MJGPV02 5 360 $32.00
3 MJGPV03 7 360 $38.00
4 MJGPV04 8 360 $38.00
6 MJGPV06 12 204 $52.00
8 MJGPV08 15 175 $57.00
10 MJGPV10 20 108 $75.00
12 MJGPV12 25 72 $83.00
14 MJGPV14 36 1 $156.00
16 MJGPV16 42 1 $175.00
18 MJGPV18 45 1 $277.00
20 MJGPV20 60 1 $297.00
24 MJGPV24 70 1 $377.00
TRANSITION VALVE PACK - COMPACT

MJ GLAND, MJ TRANSITION GASKET WITH ANTI-ROTATIONAL BOLTS & NUTS
3 MJGPVT03 7 360 $40.00
4 MJGPVT04 8 360 $42.00
6 MJGPVT06 12 204 $55.00
8 MJGPVT08 15 175 $63.00
10 MJGPVT10 20 108 $83.00
12 MJGPVT12 25 72 $89.00

HOUSTON CORPORATE
Price List
(inches) (lbs.)
GLAND PACK - FULL BODY

MJ FULL BODY GLAND, MJ GASKET & T-HEAD BOLTS & NUTS
2 MJGP02** 5 360 $26.00
3 MJDGP03 7 340 $30.00
4 MJDGP04 10 300 $42.00
6 MJDGP06 16 200 $66.00
8 MJDGP08 25 100 $86.00
10 MJDGP10 30 100 $107.00
12 MJDGP12 40 50 $132.00
14 MJDGP14 45 1 $175.00
16 MJDGP16 55 1 $249.00
18 MJDGP18 65 1 $337.00
20 MJDGP20 85 1 $439.00
24 MJDGP24 105 1 $532.00
30 MJDGP30 220 1 $1,098.00
36 MJDGP36 301 1 $1,463.00
42 MJDGP42 424 1 $2,134.00
48 MJDGP48 579 1 $2,556.00
**C153
OPCION
HEAVY DUTY RETAINER GLAND PACKS
1
3 MJRGHDP03 6 100 $78.00
4 MJRGHDP04 9 100 $80.00
6 MJRGHDP06 15 72 $128.00
8 MJRGHDP08 18 54 $130.00
10 MJRGHDP10 28 32 $276.00
12 MJRGHDP12 30 32 $283.00
14 MJRGHDP14 49 1 $325.00
16 MJRGHDP16 55 1 $419.00
18 MJRGHDP18 62 1 $525.00
20 MJRGHDP20 75 1 $507.00
24 MJRGHDP24 101 1 $813.00
30 MJRGHDP30 200 1 $1,840.00
36 MJRGHDP36 242 1 $2,122.00
BOLT PACK
MJ GASKET WITH T-BOLTS & NUTS
2 MJBGAS02 2 360 $17.00
3 MJBGAS03 3 360 $23.00
4 MJBGAS04 4 360 $26.00
6 MJBGAS06 6 360 $30.00
8 MJBGAS08 6 300 $34.00
10 MJBGAS10 8 198 $45.00
12 MJBGAS12 8 150 $47.00
14 MJBGAS14 11 100 $67.00
16 MJBGAS16 13 100 $75.00
18 MJBGAS18 13 100 $78.00
20 MJBGAS20 15 100 $87.00
24 MJBGAS24 21 100 $104.00
30 MJBGAS30 38 1 $204.00
36 MJBGAS36 46 1 $236.00
HOUSTON CORPORATE
Price List
(inches) (lbs.)
42 MJBGAS42* 104 1 $846.00

48 MJBGAS48* 119 1 $950.00
* Can not be used on StarGrips
LONGER BOLT PACK

MJ GASKET WITH LONGER T-BOLTS & NUTS
3 MJBGAS03W/3.5 3 360 $26.00
4 MJBGAS04W/4 4 360 $28.00
6 MJBGAS06W/4 6 360 $34.00
8 MJBGAS08W/4 6 300 $37.00
10 MJBGAS10W/4.5 8 198 $49.00
12 MJBGAS12W/4.5 8 150 $54.00
14 MJBGAS14W/5 12 100 $75.00
16 MJBGAS16W/5 14 100 $82.00
18 MJBGAS18W/5 14 100 $90.00
20 MJBGAS20W/5 16 120 $107.00
TRANSITION BOLT PACK

MJ TRANSITION GASKET WITH T-BOLTS & NUTS
2 MJBGAST02 2 360 $23.00
3 MJBGAST03 3 360 $23.00
4 MJBGAST04 4 360 $27.00
6 MJBGAST06 6 360 $34.00
8 MJBGAST08 6 300 $39.00
10 MJBGAST10 8 198 $50.00
12 MJBGAST12 8 150 $54.00
STAR BLUE BOLT PACK - MJ GASKET WITH

FLUOROPOLYMER COATED T-BOLTS & NUTS
3 MJBCGAS03 3 300 $38.00
4 MJBCGAS04 4 360 $40.00
6 MJBCGAS06 6 360 $55.00
8 MJBCGAS08 6 300 $55.00
10 MJBCGAS10 8 198 $73.00
12 MJBCGAS12 8 150 $78.00
14 MJBCGAS14 11 100 $125.00
16 MJBCGAS16 13 100 $138.00
20 MJBCGAS20 14 100 $159.00
24 MJBCGAS24 17 100 $226.00
VALVE BOLT PACK

MJ GASKET WITH ANTI-ROTATIONAL BOLTS & NUTS
2 MJBGASV02 2 360 $19.00
3 MJBGASV03 3 360 $24.00
4 MJBGASV04 4 360 $24.00
6 MJBGASV06 6 360 $32.00
8 MJBGASV08 6 300 $50.00
10 MJBGASV10 8 198 $50.00
12 MJBGASV12 8 150 $55.00

HOUSTON CORPORATE
Price List
(inches) (lbs.)
OPCION 3 E
MPAQUE Y P LONGER VALVE BOLT PACK (IN PLASTIC BAGS)
ERNOS MJ GASKET WITH LONGER ANTI-ROTATIONAL BOLTS & NUTS
3 MJBGASV03W/3.5P 3 360 $24.00
4 MJBGASV04W/4P 4 360 $25.00
6 MJBGASV06W/4P 6 360 $35.00
8 MJBGASV08W/4P 6 300 $36.00
10 MJBGASV10W/4.5P 8 198 $56.00
12 MJBGASV12W/4.5P 8 150 $58.00
MJ GASKET - SBR
2 MJGAS02 0.30 2880 $7.00
3 MJGAS03 0.40 2000 $8.00
4 MJGAS04 0.50 1260 $8.00
6 MJGAS06 0.60 880 $8.00
8 MJGAS08 0.80 720 $9.00
10 MJGAS10 1.00 640 $13.00
12 MJGAS12 1.10 480 $15.00
14 MJGAS14 1.50 420 $25.00
16 MJGAS16 2.00 350 $25.00
18 MJGAS18 2.30 700 $28.00
20 MJGAS20 2.70 600 $30.00
24 MJGAS24 3.00 560 $38.00
30 MJGAS30 4.20 200 $90.00
36 MJGAS36 4.80 200 $102.00
42 MJGAS42 5.80 100 $214.00
48 MJGAS48 6.50 100 $227.00
MJ TRANSITION GASKET
2 MJGAST02 0.40 2700 $6.00
3 MJGAST03 0.50 2000 $8.00
4 MJGAST04 0.60 1200 $9.00
6 MJGAST06 0.70 700 $10.00
8 MJGAST08 1.10 720 $15.00
10 MJGAST10 1.30 420 $17.00
12 MJGAST12 1.60 350 $19.00
PUSH ON GASKET
4 POGAS04 0.4 2144 $7.00
6 POGAS06 0.6 1704 $8.00
8 POGAS08 0.7 920 $10.00
10 POGAS10 0.9 640 $16.00
12 POGAS12 1 600 $17.00
14 POGAS14 1.3 400 $36.00
16 POGAS16 1.45 300 $36.00
18 POGAS18 3.32 250 $50.00
20 POGAS20 3.55 220 $54.00
24 POGAS24 4.4 180 $54.00

HOUSTON CORPORATE
Price List
(inches) (lbs.)
EMPAQ PUSH ON TRANSITION GASKET

UE SIZE ITEM CODE WT QTY LIST PRICE
4 POGAST04 0.4 102 $47.00
6 POGAST06 0.6 60 $52.00
8 POGAST08 0.7 45 $87.00
10 POGAST10 0.9 35 $107.00
12 POGAST12 1 24 $145.00
MJ T-HEAD BOLT WITH HEXAGON NUT (LOOSE)

PERNO SIZE ITEM CODE WT QTY LIST PRICE
5/8 x 3 BOLTCS30 0.50 2880 $2.90
S 3/4 x 3 1/2 BOLTCS35 0.80 2400 $3.30
3/4 x 4 BOLTCS40 0.85 2160 $3.30
3/4 X 4 1/2 BOLTCS45 0.90 1920 $3.70
3/4 x 5 BOLTCS50 1.10 1680 $4.00
1x6 BOLTCS60 1.70 768 $10.00
1 1/4 x 6 BOLTCS61.25 1.80 720 $25.90
3/4 x 6 BOLTCS3/4X6 1.20 $8.70
1 1/4 x 6 1/2 BOLTCS651.25 3.50 432 $15.00
3/4 x 7 BOLTCS70 1.52 1200 $8.70
3/4 x 9 BOLTCS90 2.02 720 $11.50
MJ 304 STAINLESS STEEL T-HEAD BOLT WITH HEXAGON NUT (LOOSE)

5/8 x 3 BOLTSS30 0.50 2880 POA
3/4 x 3.5 BOLTSS35 0.80 2040 POA
3/4 x 4 BOLTSS40 0.85 1800 POA
3/4 x 4.5 BOLTSS45 0.90 1560 POA
3/4 x 5 BOLTSS50 1.00 1560 POA
1x6 BOLTSS60 2.00 768 POA
1 1/4 x 6.5 BOLTSS651.25 2.00 432 POA
1 1/4 x 8.5 BOLTSS850 4.87 360 POA
MJ 316 STAINLESS STEEL T-HEAD BOLT WITH HEXAGON NUT (LOOSE)

5/8 x 3 BOLTSS31630 0.50 2880 POA
3/4 x 3.5 BOLTSS31635 0.80 2040 POA
3/4 x 4 BOLTSS31640 0.85 1800 POA
3/4 x 4.5 BOLTSS31645 0.90 1560 POA
3/4 x 5 BOLTSS31650 1.00 1560 POA
1x6 BOLTSS31660 2.00 768 POA
1 1/4 x 6.5 BOLTSS316650 2.00 432 POA
1 1/4 x 8.5 BOLTSS316850 4.87 360 POA
MJ STAR BLUE T-HEAD BOLT WITH HEXAGON NUT (LOOSE)

(FLUOROPOLYMER COATED)
5/8 x 3 BOLTCB30 0.50 2880 $6.50
3/4 x 3 1/2 BOLTCB35 0.80 2040 $7.20
3/4 x 4 BOLTCB40 0.85 1800 $8.00
3/4 x 4 1/2 BOLTCB45 0.90 1560 $8.70
3/4 x 5 BOLTCB50 1.10 1440 $9.40
1x6 BOLTCB60 1.70 768 $20.10

HOUSTON CORPORATE
Price List
(inches) (lbs.)
MJ ANTI-ROTATIONAL T-HEAD BOLT WITH HEXAGON NUT (LOOSE)

5/8 x 3 BOLTAR30 0.50 2880 $8.70
3/4 x 3 1/2 BOLTAR35 0.80 2040 $5.50
3/4 x 4 BOLTAR40 0.85 1800 $5.80
3/4 x 4 1/2 BOLTAR45 0.90 1560 $6.50
3/4 x 5 BOLTAR50 1.10 1560 $10.40
MJ STAR BLUE ANTI-ROTATIONAL T-HEAD BOLT WITH HEXAGON NUT (LOOSE)

(FLUOROPOLYMER COATED)
5/8 x 3 BOLTARB30 0.50 2880 $15.00
3/4 x 3.5 BOLTARB35 0.80 2040 $16.00
3/4 x 4 BOLTARB40 0.85 1800 $15.00
3/4 x 4.5 BOLTARB45 0.90 1560 $19.00
3/4 x 5 BOLTARB50 1.10 1440 $22.00
MJ EYEBOLT (PIGTAIL) WITH HEXAGON NUT (LOOSE)

3/4 x 3.5 BOLTPE35 0.91 1320 $5.90
3/4 x 4 BOLTPE40 1.00 1200 $6.00
3/4 x 4.5 BOLTPE45 1.16 1080 $6.25
ORDERING INFORMATION
PIPE QTY C153 T-BOLT C110 T-BOLT STARGRIP
SIZE REQ. SIZE SIZE T-BOLT SIZE
2 2 5/8 x 3 5/8 x 3 N/A
3 4 5/8 x 3 5/8 x 3 5/8 x 3
4 4 3/4 x 3 1/2 3/4 x 3 1/2 3/4 x 3 1/2
6 6 3/4 x 3 1/2 3/4 x 3 1/2 3/4 x 3 1/2
8 6 3/4 x 3 1/2 3/4 x 4 3/4 x 4
10 8 3/4 x 3 1/2 3/4 x 4 3/4 x 4
12 8 3/4 x 3 1/2 3/4 x 4 3/4 x 4
14 10 3/4 x 4 3/4 x 4 1/2 3/4 x 4 1/2
16 12 3/4 x 4 3/4 x 4 1/2 3/4 x 4 1/2
18 12 3/4 x 4 3/4 x 4 1/2 3/4 x 4 1/2
20 14 3/4 x 4 3/4 x 4 1/2 3/4 x 4 1/2
24 16 3/4 x 4 1/2 3/4 x 5 3/4 x 5
30 20 1 x 5 1/2 1x6 1x6
36 24 1 x 5 1/2 1x6 1x6
42 28 1 1/4 x 6 1 1/4 x 6 1/2 1 1/4 x 8 1/2
48 32 1 1/4 x 6 1 1/4 x 6 1/2 1 1/4 x 8 1/2
FLANGE ACC PACKS - PLEASE CONTACT YOUR

CUSTOMER SERVICE REPRESENTATIVE FOR PRICING

HOUSTON CORPORATE

Pipe Fitting Accessories: Import Price List

Uploaded by

Copyright:

Available Formats

Pipe Fitting Accessories: Import Price List

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pipe Fitting Accessories: Import Price List

Uploaded by

Copyright:

Available Formats

IMPORT PRICE LIST

PIPE FITTING ACCESSORIES

version: IMP-ACC-UPL.19.01 EFFECTIVE: JANUARY 14, 2019

Star Pipe Products Corporate Headquarters

® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS

General Terms & Conditions pg. 2-3

MJ Glands pg. 6-7

Pre-Packaged MJ Accessories pg. 7-11

MJ /Push-On Gaskets pg. 11-12

MJ Bolts & Nuts pg. 12-13

STAR® PIPE PRODUCTS

DUCTILE IRON MJ GLAND - COMPACT

DUCTILE IRON MJ GLAND (OVERSIZED) - COMPACT

DUCTILE IRON MJ SWIVEL GLAND - COMPACT

DUCTILE IRON MJ GLAND - FULL BODY

STAR® PIPE PRODUCTS

OPCION 2 Y 3 HEAVY DUTY RETAINER GLANDS

GLAND PACK - COMPACT

LONGER BOLT - GLAND PACK - COMPACT

STAR® PIPE PRODUCTS

TRANSITION GLAND PACK - COMPACT

GLAND PACK WITH STAR BLUE BOLTS - COMPACT

VALVE PACK - COMPACT

TRANSITION VALVE PACK - COMPACT

STAR® PIPE PRODUCTS

GLAND PACK - FULL BODY

42 MJBGAS42* 104 1 $846.00

LONGER BOLT PACK

TRANSITION BOLT PACK

STAR BLUE BOLT PACK - MJ GASKET WITH

VALVE BOLT PACK

STAR® PIPE PRODUCTS

STAR® PIPE PRODUCTS

EMPAQ PUSH ON TRANSITION GASKET

MJ T-HEAD BOLT WITH HEXAGON NUT (LOOSE)

MJ 304 STAINLESS STEEL T-HEAD BOLT WITH HEXAGON NUT (LOOSE)

MJ 316 STAINLESS STEEL T-HEAD BOLT WITH HEXAGON NUT (LOOSE)

MJ STAR BLUE T-HEAD BOLT WITH HEXAGON NUT (LOOSE)

STAR® PIPE PRODUCTS

MJ ANTI-ROTATIONAL T-HEAD BOLT WITH HEXAGON NUT (LOOSE)

MJ STAR BLUE ANTI-ROTATIONAL T-HEAD BOLT WITH HEXAGON NUT (LOOSE)

MJ EYEBOLT (PIGTAIL) WITH HEXAGON NUT (LOOSE)

FLANGE ACC PACKS - PLEASE CONTACT YOUR

STAR® PIPE PRODUCTS

You might also like