pcm-9361 DATA SHEET
pcm-9361 DATA SHEET
pcm-9361 DATA SHEET
Utility:
SMBus LAN KB/Mouse COM1 TTL USB
BIOS flash Monitoring
Specifications
CPU Intel® Atom™ Processor N270 1.60 GHz
Front Side Bus 533 MHz
Processor System L2 Cache 512 KB
Chipset Intel® 945GSE
BIOS Award 4 Mbit
Technology DDR2 400/533 MHz
Memory Max. Capacity 2 GB
Socket 1 x 200-pin SODIMM
SSD CompactFlash Card Type I/II
VGA 1
COM 1 (RS-232)
Coastline I/O RJ-45 1
USB 1
K/B, Mouse 1
RS-232/422/485 1
K/B -
Mouse -
Internal I/O USB 4 x USB 2.0
Audio High Definition Audio (HD), Lin-in, Lin-out, Mic-in
GPIO 8-bit general purpose Input/Output
SMBus Supported
Max. Data Transfer Rate 150 MB/s
SATA
Channel 2
Expansion Slot PCI-104 1
Speed 10/100/1000 Mbps
Ethernet Controller Realtek 8110SC
Interface 1 x RJ-45
Controller Intel 945GSE
Optimized Shared Memory Architecture up to 224 MB system memory
VRAM
LVDS2 wide screen support: EX:1366 x 768 (24-bits), 1440 x 900 (48-bits), 1680 x 1050 (48-bits), 1920 x 1080 (48-bits)
Display
LVDS LCD 1 x 36-bit LVDS1, 1 x 48-bit LVDS2 (PCM-9361EVG-S6A1E)
TTL LCD 1 x 18-bit TTL
Dual Independent Display CRT + LVDS, CRT + TTL
Operation Temperature 0 ~ 60° C (32 ~ 140° F)
Environment
Operating Humidity 10% ~ 90% relative humidity, non-condensing
Power Type AT / ATX
ATX: +5 V ± 5%, ±12 V ± 5%
Power Supply Voltage
AT: 5V only to boot up (12 V is optional for LCD inverter and add on card)
Power Typical (WinXP Idle Mode): +5 V @ 1.9 A, +12 V @ 0.07 A
Power Consumption
Max (Test in HCT): +5 V @ 2.38 A, +12 V @ 0.09 A
Power Management APM1.2, ACPI3.0, wake on LAN, and modem ring-in functions
Battery Lithium 3 V / 210 mAH
Output System reset
Watchdog Timer
Interval Programmable 1 ~ 255 sec
Dimensions (L x W) 146 x 102 mm (5.7" x 4")
Physical Characteristics
Weight 0.85 kg (1.87 lb), weight of total package
Board Diagram
Atom N270
1.6 GHz
uFCBGA 437P
22 x 22 mm
FSB 533MHz
Watchdog COM1/2
Ordering Information
USB Thermal Operating
Part No. CPU Memory CRT LVDS LVDS2 TTL LAN Audio RS-232 RS-232/422/485 LPT KB/MS Expansion
2.0 Solution Temp.
PCM-9361FG-S6A1E Atom N270 1.6G DIMM 1 NA NA 1 1 GE HD 5 1 1 1 1 PCI-104 Passive 0 ~ 60° C
PCM-9361EG-S6A1E Atom N270 1.6G DIMM 1 36-bit NA NA 1 GE HD 5 1 1 1 1 PCI-104 Passive 0 ~ 60° C
PCM-9361L-S6A1E
Atom N270 1.6G DIMM 1 36-bit NA NA 1 GE HD 5 1 1 1 1 N/A Passive 0 ~ 60° C
(W/O cables)
PCM-9361FZ-1GS6A1E Atom N270 1.6G 1G bundle 1 NA NA 1 1 GE HD 5 1 1 1 1 PCI-104 Passive -20 ~ 80° C
PCM-9361EVG-S6A1E Atom N270 1.6G DIMM 1 36-bit 48-bit NA 1 GE HD 5 1 1 1 1 PCI-104 Passive 0 ~ 60° C
Software APIs
Control Monitor
General Purpose Input/Output is a flexible parallel interface
A watchdog timer (WDT) is a device that performs a specific
that allows a variety of custom connections. It allows users
operation after a certain period of time if something goes wrong
to monitor the level of signal input or set the output status to
and the system does not recover on its own.
switch on/off a device. Our API also provides Programmable
A watchdog timer can be programmed to perform a warm boot
GPIO, which allows developers to dynamically set the GPIO
GPIO Watchdog (restarting the system) after a certain number of seconds.
input or output status.
Software Utilities
The BIOS Flash utility allows customers to update the flash The eSOS is a small OS stored in BIOS ROM. It will boot up in
ROM BIOS version, or use it to back up current BIOS by case of a main OS crash. It will diagnose the hardware status,
copying it from the flash chip to a file on customers’ disk. The and then send an e-mail to a designated administrator. The
BIOS Flash utility also provides a command line version and eSOS also provides remote connection: Telnet server and FTP
BIOS Flash API for fast implementation into customized applications. eSOS server, allowing the administrator to rescue the system.
The embedded application is the most important property of Flash Lock is a mechanism that binds the board and CF card
a system integrator. It contains valuable intellectual property, (SQFlash) together. The user can “Lock” SQFlash via the Flash
design knowledge and innovation, but it is easily copied! The Lock function and “Unlock” it via BIOS while booting. A locked
Embedded Security ID utility provides reliable security functions SQFlash cannot be read by any card reader or boot from other
Embedded for customers to secure their application data within embedded Flash Lock platforms without a BIOS with the “Unlock” feature.
Security ID BIOS.