Power Safety
Protect 8.INV1 Industrial Inverters
Protect 8.INV1
Industrial Inverter
Single Phase output 230V
10 – 60 kVA
Engineering is our Business
Inverter und UPS solutions engineered by AEG Power Solutions have been protecting oil & gas infrastructure, power stations
and other industrial installations for more than 60 years.
Designed for all Industrial Applications Protect 8. industrial Applications
Protect 8.INV1, the latest new generation of our Protect • Oil & Gas (Petrochemicals, Offshore, Onshore, Pipelines)
Inverter product range is extremely robust, both electrically • Energy & Electricity generation (Power Generation, Trans-
and mechanical. It is custom-designed for use in harsh mission, Distribution)
industrial environments to meet the toughest product • Water (Desalination, Treatment)
customization requirements: • Instrumentation & Process Control (Chemicals, Mining,
• Specific mechanical protection degree Steel, Paper)
• Specific input & output voltage • Emergency Lightning
• Desired documentation • All Industrial Applications.
Protect 8.INV1 is just a part of the Protect Product Range of
Inverters and UPS suitable for industrial applications. See also
our Protect 3, Protect 4 and Protect 8 range of UPS.
PERFECT IN FORM AND FUNCTION
Power Safety
Protect 8.INV1 Industrial Inverters
Complete Systems Oversized components ensure:
Protect 8.INV1 is an industrial inverter classified according to • Higher reliability and MTBF
IEC 62040-3. • High overload capacity.
• On-line operation ensures permanent service Redundant control for high reliability:
• Microprocessor-driven control and command system • Separate microprocessors for inverter, static switch and
provides reliable power supply communication
• Battery management system boosts battery life and cuts • Separate, redundant power supplies for control cards.
operating costs
• Broad range of output power ratings, battery autonomy Low maintenance cost
times and options meet complex industrial applications Ergonomic control unit with graphical display
needs
• High level protection for users and connected equipment High short circuit resistance
(high intermittent overload capacity; high level short High EMC robustness compared to Standard IEC 62040-2
circuit strength) by a factor 2-to-3
• Excellent dynamic response easily high cyclic loads.
Redundant and individually monitored fans
Unique Design Low noise via fan speed management
Protect 8.INV1 configurations:
• Single systems Floating 220V battery voltage for linking to existing DC bus
• Parallel systems bars
• Customized input/output voltages Intelligent battery management, test and status diagnostics
Parallel operation for capacity and performance:
• Flexible Multi Master technology and Can-Bus communi- Capable of communicating with computer and
cation enables up to 8 Inverters to be connected in parallel control systems (SCADA, ESD, DCS, BMS):
for increased power, redundancy or system upgrade. • Modbus
• Profibus
Key Features • Monitoring software
High and constant efficiency even at low output power: • Ethernet, SNMP...
• Reduced operating costs Additional system equipment:
• Reduced air conditioning requirements • Bypass transformers
• Reduced battery Ah requirments. • Voltage stabilizer
Full digital control: • Maintenance bypass switch
• High reliability (no potentiometers) • AC distribution panels
• High flexibility (software controlled parameters) • Battery cubicles
• Fast dynamic response. • Explosion proof battery circuit breaker enclosures.
Full compatible with all other AEG Power Solutions:
• Industrial DC systems
• Protect STS
• Telecom systems
Protect 8.INV1: Specification
Single Phase Output
MODEL P8.INV1-10 P8.INV1-20 P8.INV1-30 P8.INV1-40 P8.INV1-60
NOMINAL RATING (AT COS 0.8 LAG)
IN KVA 10 20 30 40 60
INVERTER UNIT
DC input 220 V ± 20%
Nominal AC voltage 230 V (220 V, 240V)
Output voltage static response < ±1%
Output voltage dynamic response < ±2%
Recovery time 1 ms
Frequency 50/60Hz
Frequency tolerance without mains ±0.1%
Frequency synchronisation range ±1% (±2%, ±3%)
Allowable load power factor 0.0 lag to 0.0 lead
Output phase current in A 43 87 130 174 261
Voltage wave form sinusoidal
Voltage distortion <3%
Crest factor max. 3
Overload response 1 min. 150%
Overload response 10 mn. 125%
Max short circuit current > 3 x Inom
STATIC BYPASS SWITCH
AC voltage 230 V (220 V, 240 V)
Frequency 50/60 Hz
Nominal power in kVA 10 20 30 40 60
GENERAL DATA
Efficiency – typical up to 92%
Noise level depending on rating < 55–70 dB(A)
EMC compatibility EN 62040-2
Air cooling with redundant and monitored fans Yes
Operating temperature range min./max.
(without de-rating) –5°C / +40°C
Storage temperature range min./max. –30°C / +75°C
Maximum altitude without de-rating 1000 m
Protection degree per IEC 529/EN 60529
standard system (as option) IP20 (IP22 & IP43; >IP43 engineered)
Equipment colour RAL 7035
WEIGHTS AND DIMENSIONS
Height standard Inverter (mm) 1810 1810 1810 1810 1810
Height with max. Options (mm) 2015 2015 2015 2015 2015
Width (mm) 600 900 900 900 1200
Depth (mm) 860 860 860 860 860
Weight (kg) ~ 270 400 580 580 900
Protect 8.INV1 - AEG - 06/10 - EN. Due to our policy of continuous development, data in this document is subject to change without notice and becomes contractual only after written confirmation.
Batteries Services
AEG Power Solutions has considerable in-house With over 60 years of expertise in power systems and
knowledge in battery technology and is able to offer solutions, AEG Power Solutions is renowned for its
expert advice on the specifying, selection, operation unparalleled services and technical support in critical
and testing of batteries. Our total system solutions application environments. As the world class system
include a wide range of products using lead acid and provider, you can rely on a global network of
nickel-cadmium batteries in vented and gas recombination 20 Services Centers supported by over 150 field
technologies. Replacement batteries can be supplied engineers and more than 100 certified service partners
around the world. From the power solution selection
and installed by our Global Service Team.
to your process installation and commissioning, our
certified experts go beyond your expectations by
offering service excellence that will ensure the lowest
operational cost for your mission-critical equipment.
The reliability of your installed power solution is
supported by a Global Service Team renowned for its
short response time and trouble shooting efficiency.
TM
Choosing one of the Pro Care Preventive
Maintenance Options gives you the ultimate peace
of mind reassuring complete cost control, security
and uninterrupted power supply in utmost critical
situations.
You can also benefit from a full range of professional
services that will protect and ensure the durability of
Protect 8. Family Highlights your investment and will take over when you need it
• The new generation of AEG Power Solution UPS the most:
TM
• More than 60 years experience in UPS business • Pro Care Preventive Maintenance Options
summarized in Protect 8 • Turnkey solutions
• Modern modular „Building block“ to meet all • Installation & commissioning
customization requirements • Maintenance services
• E-Service / remote monitoring
• True on-line double conversion UPS (VFI SS 111)
• 24/7 hotline
• UPS designed for industrial applications • Onsite training
• Short lead time • Hot swapping
• High robustness for harsh working environments • Onsite battery replacement
• Redundant controls for high reliability • Battery monitoring
• Small footprint • Facility and equipment management
• High efficiency even at low output power • 24/7 global onsite contracts
• Compatible with every type of battery • Power quality assessment
• Full digital control • Load bank & site capacity analysis
• Top class communication platform. • Trouble shooting and repair.
AEG is a registered trademark used under license from AB Electrolux
For further information
please refer to our website:
www.aegps.com PERFECT IN FORM AND FUNCTION
