Chapter 4 Solution..

CHAPTER 4
Process Costing and Hybrid Product-Costing

Systems
ANSWERS TO REVIEW QUESTIONS

4-1 In a job-order costing system, costs are assigned to batches or job orders of
production. Job-order costing is used by firms that produce relatively small numbers
of dissimilar products. In a process-costing system, costs are averaged over a large
number of product units. Process costing is used by firms that produce large
numbers of nearly identical products.
4-2 Process costing would be an appropriate product-costing system in the following

industries: petroleum, food processing, lumber, chemicals, textiles, and electronics.
Each of these industries is involved in the production of very large numbers of
highly similar products.
4-3 Process costing could be used in the following nonmanufacturing enterprises:

processing of tests in a medical diagnostic laboratory, processing of tax returns by
the Internal Revenue Service, and processing of loan applications in a bank.
4-4 Product-costing systems are used for the following purposes:
(a) In financial accounting: Product costs are needed to value inventory on the
balance sheet and to compute the cost-of-goods-sold expense on the income
statement.
(b) In managerial accounting: Product costs are needed for planning, for cost
control, and to provide managers with data for decision making.
(c) In reporting to interested organizations: Product cost information is used to

report on relationships between firms and various outside organizations. For
example, hospitals keep track of the costs of medical procedures that are
reimbursed by insurance companies or by the federal government under the
Medicare program.
4-5 An equivalent unit is a measure of the amount of productive effort applied in the
production process. In process costing, costs are assigned to equivalent units rather
than to physical units.
McGraw-Hill/Irwin  2002 The McGraw-Hill Companies, Inc.

Managerial Accounting, 5/e 4-1
4-6 The following four steps are used in process costing:
(a) Analysis of physical flow of units: All of the units in the beginning and ending
inventories, those started during the period, and those transferred out to finished
goods are accounted for.
(b) Calculation of equivalent units: The equivalent units of activity are computed for
direct material and for conversion.
(c) Computation of unit costs: The costs per equivalent unit for direct material and
conversion are computed.
(d) Analysis of total costs: The cost of the goods completed and transferred out and
the cost of the ending work-in-process inventory are determined.
4-7 (a) Journal entry to enter direct-material costs into Work-in-Process Inventory
account:
Work-in-Process Inventory: Department A .................... XXX
Raw-Material Inventory .......................................... XXX
(b) Journal entry to record transfer of goods from the first to the second department
in the production sequence:
Work-in-Process Inventory: Department B .................... XXX
Work-in-Process Inventory: Department A .......... XXX
4-8 Transferred-in costs are the costs assigned to partially completed products that
have been transferred from one production department into the next department.
4-9 The $175,000 of transferred-in costs were incurred prior to January 1 and in the
mixing department. The costs must have been incurred prior to January 1, because
they are included in the cost of the beginning work-in-process inventory on that
date. Moreover, these costs must have been incurred in the mixing department,
because they have been transferred into the cooking department.
4-10 The name ''weighted-average method'' comes from the fact that the cost per
equivalent unit computed under this method is a weighted average of costs incurred
during the current period and costs incurred during prior periods.

4-2 Solutions Manual
4-11 The difference between normal and actual costing lies in the calculation of the
manufacturing-overhead cost of the current period. Under actual costing, the
manufacturing-overhead cost of the current period is the actual overhead cost
incurred during the period. Under normal costing, the current-period manufacturing
overhead is computed as the product of the predetermined overhead rate and the
actual level of the cost driver used to apply manufacturing overhead.
4-12 If manufacturing overhead were applied according to some activity base (or cost
driver) other than direct labor, then direct-labor costs and manufacturing-overhead
costs would be accounted for separately instead of being combined into one
account called "conversion costs." Thus, instead of two columns for direct-material
and conversion costs, there would be three columns: direct material, direct labor,
and manufacturing overhead.
4-13 Operation costing is a hybrid product-costing system that is used when conversion
activities are very similar across product lines, but the direct materials differ
significantly. This is often the case in batch manufacturing operations. Conversion
costs are accumulated by department, and process-costing methods are used to
assign these costs to products. In contrast, direct-material costs are accumulated by
job order or by batch, and job-order costing is used to assign direct-material costs to
products.
4-14 The departmental production report is the key document in a process-costing

system rather than the job-cost sheet used in job-order costing. The departmental
production report shows the analysis of the physical flow of units, the calculation of
equivalent units, the computation of the cost per equivalent unit, and the analysis of
the total costs incurred in the production department. The report shows the cost of
the ending work-in-process inventory as well as the cost of the goods completed and
transferred out of the department.
4-15 There is no direct material in the March 1 work in process for the stitching
department because direct material (rawhide lacing) is added at the end of the
process in that department.

SOLUTIONS TO EXERCISES
EXERCISE 4-16 (10 MINUTES)
The general formula for all three cases is the following:
Work-in-process, + Units started – Units completed = Work-in-process,

beginning during month during month ending
Using this formula, the missing amounts are:
1. 12,000 units
2. 5,300 kilograms
3. 750,000 gallons
All three of these companies manufacture large numbers of relatively homogeneous

products (i.e., lumber and paper). Therefore, process costing is an appropriate product-
costing system.

1. 6,000 equivalent units (refer to (a) in the following table)
2. 4,400 equivalent units (refer to (b) in the following table)
CALCULATION OF EQUIVALENT UNITS: RAINBOW GLASS COMPANY

Weighted-Average Method
Percentage
of Equivalent Units
Completion with
Physical Respect to Direct
Units Conversion Material Conversion
Work in process, October 1 .... 1,000 60%
Units started during October .. 5,000
Total units to account for ........ 6,000
Units completed and transferred

out during October ........... 4,000 100% 4,000 4,000
Work in process, October 31 .. 2,000 20% 2,000 400
Total units accounted for ........ 6,000 _____ ____
Total equivalent units .............. (a) 6,000 (b) 4,400
CALCULATION OF EQUIVALENT UNITS: TERRA ENERGY COMPANY - LODI PLANT

Percentage
of
Completion
with Equivalent Units
Work in process, November 1................ 2,000,000 25%
Units started during November ............. 950,000
Total units to account for ....................... 2,950,000

out during November ......................... 2,710,000 100% 2,710,000 2,710,000
Work in process, November 30.............. 240,000 80% 240,000 192,000
Total units accounted for ....................... 2,950,000 ________ ________
Total equivalent units ............................. 2,950,000 2,902,000

CALCULATION OF EQUIVALENT UNITS: FIT-FOR-LIFE FOODS CORPORATION

Percentage
of Percentage
Completion of
with Completion
Respect to with Equivalent Units
Physical Direct Respect to Direct
Units Material Conversion Material Conversion
Work in process, January 1 .... 20,000 80% 60%
Units started during the year .. 120,000
Total units to account for ........ 140,000
Unit completed and transferred

out during the year ............ 125,000 100% 100% 125,000 125,000
Work in process, December 31 15,000 70% 30% 10,500 4,500
Total units accounted for ........ 140,000 ______ _______
Total equivalent units .............. 135,500 129,500
CALCULATION OF COST PER EQUIVALENT UNIT: IDAHO LUMBER COMPANY

Direct
Material Conversion Total
Work in process, November 1................... $ 65,000 $180,000 $ 245,000
Costs incurred during November ............. 425,000 690,000 1,115,000
Total costs to account for ......................... $490,000 $870,000 $1,360,000
Equivalent units ......................................... 7,000 1,740
Costs per equivalent unit .......................... $70* $500† $570
*$70 = $490,000 ÷ 7,000

†$500 = $870,000 ÷ 1,740

CALCULATION OF COST PER EQUIVALENT UNIT: OTSEGO GLASS COMPANY

Direct
Work in process, June 1 ......................... $ 37,000 $ 36,750 $ 73,750
Costs incurred during June ................... 150,000 230,000 380,000
Total costs to account for ...................... $187,000 $266,750 $453,750
Equivalent units ...................................... 17,000 48,500
Costs per equivalent unit ....................... $11.00* $5.50† $16.50
*$11.00 = $187,000 ÷ 17,000

†$5.50 = $266,750 ÷ 48,500

SAVANNAH TEXTILES COMPANY

Direct
Work in process, September 1.................. $ 94,000 $ 44,400 $138,400
Costs incurred during September ............ 164,000 272,800 436,800
Total costs to account for ......................... $258,000 $317,200 $575,200
Equivalent units ......................................... 60,000 52,000
Costs per equivalent unit .......................... $4.30 $6.10 $10.40
1. Cost of goods completed and

transferred out during September:
 number of units  total cost per 
    ..................... 50,000$10.40 $520,000
 transferred out   equivalent unit
2. Cost remaining in September 30

work in process:
Direct material (10,000*$4.30) $43,000

Conversion (2,000*$6.10) ....... 12,200
Total ............................................. 55,200
Total costs accounted for ............... $575,200
*Equivalent units in September 30 work in process:
Direct
Material Conversion
Total equivalent units (weighted average) ........................ 60,000 52,000
Units completed and transferred out ................................ (50,000) (50,000)
Equivalent units in ending work in process ..................... 10,000 2,000

TULSA PAPERBOARD COMPANY

Direct
Work in process, February 1 ................... $ 5,500 $ 17,000 $ 22,500
Costs incurred during February ............. 110,000 171,600 281,600
Total costs to account for ....................... $115,500 $188,600 $304,100
Equivalent units ....................................... 110,000 92,000
Costs per equivalent unit ........................ $ 1.05 $ 2.05 $ 3.10
1. Cost of goods completed and

transferred out during February:
    ....................... 90,000$3.10 $279,000
 transferred out   equivalent unit
2. Cost remaining in February 28 work

in process:
Direct material (20,000*$1.05) . $ 21,000

Conversion (2,000*$2.05) ........ 4,100
Total .............................................. 25,100
Total costs accounted for ................ $304,100
*Equivalent units in February 28 work in process:
Direct
Material Conversion
Total equivalent units (weighted average) ....................... 110,000 92,000
Units completed and transferred out ............................... (90,000) (90,000)
Equivalent units in ending work in process .................... 20,000 2,000

1. Diagram of production process:

Work-in-Process Inventory:
Preparation Department
Batch P25 Batch S33
Accumulated Conversion costs:

by Direct-labor
department Manufacturing
overhead
Finishing Department
Batch P25 Batch S33
Accumulated Direct-
by material
batch costs
Packaging Department
Batch P25
Finished-Goods Inventory

EXERCISE 4-25 (CONTINUED)
2. The product cost for each basketball is computed as follows:
Professional Scholastic
Direct material: ....................................................................
Batch P25 ($42,000 ÷ 2,000) .......................................... $21.00 -0-
Batch S33 ($45,000 ÷ 4,000) .......................................... -0- $11.25
Conversion: Preparation Department .............................. 7.50 7.50
Conversion: Finishing Department .................................. 6.00 6.00
*Conversion: Packaging Department ................................ .50 -0-
Total product cost ............................................................. $35.00 $24.75
*The two production departments each worked on a total of 6,000 balls, but the Packaging
Department handled only the 2,000 professional balls.
3. Journal entries:
Work-in-Process Inventory: Preparation Department .......... 39,500*

Raw-Material Inventory ................................................. 39,500
*$39,500 = $42,000 of direct material

for batch P25 – $2,500 of packaging material

*Direct-material cost for batch S33.

Applied Conversion Costs ............................................ 45,000
*$45,000 = 6,000 units$7.50 per unit
Work-in-Process Inventory: Finishing Department .............. 129,500*

Work-in-Process Inventory: Preparation Department 129,500
*$129,500 = $39,500 + $45,000 + $45,000

EXERCISE 4-25 (CONTINUED)
Work-in-Process Inventory: Finishing Department .............. 36,000*

Applied Conversion Costs ............................................ 36,000
*$36,000 = 6,000 units$6.00 per unit
Work-in-Process Inventory: Packaging Department ............ 66,500*

Finished-Goods Inventory ...................................................... 99,000†
Work-in-Process Inventory: Finishing Department .... 165,500
*$66,500 = $39,500 + (2,000$7.50) + (2,000$6.00).

These are the costs accumulated for batch P25 only.
†$99,000= $45,000 + (4,000$7.50) + (4,000$6.00).
These are the costs accumulated for batch S33 only.
Work-in-Process Inventory: Packaging Department ............ 3,500

Raw-Material Inventory ................................................. 2,500*
Applied Conversion Costs ............................................ 1,000†
*Cost of packaging material for batch P25.

†$1,000 = 2,000 units$.50 per unit
Finished-Goods Inventory ...................................................... 70,000*

Work-in-Process Inventory: Packaging Department .. 70,000
*$70,000 = $66,500 + $3,500

1. Work-in-Process Inventory: Pouring Department ............... 1,090,000

Wages Payable .............................................................. 340,000
Manufacturing Overhead .............................................. 680,000
2. Work-in-Process Inventory: Finishing Department ............. 900,000

Work-in-Process Inventory: Pouring Department ...... 900,000
3. Work-in-Process Inventory: Finishing Department ............. 725,000

Raw-Material Inventory ............................................... 25,000
Wages Payable ............................................................. 280,000
Manufacturing Overhead ............................................. 420,000
4. Finished-Goods Inventory ..................................................... 400,000

Work-in-Process Inventory: Finishing Department ... 400,000

SOLUTIONS TO PROBLEMS
PROBLEM 4-27 (50 MINUTES)
1. Physical flow of units:
Physical
Units
Work in process, 1/1/x1 .......................................................................... 200,000
Units started during 20x1 ....................................................................... 1,000,000
Total units to account for ....................................................................... 1,200,000
Units completed and transferred out during 20x1 ............................... 900,000

Work in process, 12/31/x1 ...................................................................... 300,000
Total units accounted for ....................................................................... 1,200,000
2. Equivalent units:
Percentage
of
Completion
Work in process, 1/1/x1 ............... 200,000 80%
Units started during 20x1 ............ 1,000,000
Total units to account for ............ 1,200,000

out during 20x1 ....................... 900,000 100% 900,000 900,000
Work in process, 12/31/x1 ........... 300,000 50% 300,000 150,000
Total units accounted for ............ 1,200,000 ________ ________
Total equivalent units .................. 1,200,000 1,050,000

PROBLEM 4-27 (CONTINUED)
3. Costs per equivalent unit:
Direct
Work in process, 1/1/x1 ................................. $ 200,000 $ 504,000 $ 704,000
a
Costs incurred during 20x1 ........................... 1,300,000 3,192,000b 4,492,000

Total costs to account for.............................. $1,500,000 $3,696,000 $5,196,000
Equivalent units.............................................. 1,200,000 1,050,000
Costs per equivalent unit............................... $1.25 c $3.52d $4.77e
aConversion cost = direct labor + overhead

= direct labor + (60%direct labor)
= 160%direct labor
= 160%$315,000
= $504,000
bConversion cost = 160%direct labor
= 160%$1,995,000
= $3,192,000
c$1.25 = $1,500,000 ÷ 1,200,000
d$3.52 = $3,696,000 ÷ 1,050,000
e$4.77 = $1.25 + $3.52

4. Cost of ending inventories:
Cost of goods completed and transferred out:

     .................... 900,000$4.77 $4,293,000
 transferred out   equivalent unit 
Cost remaining in 12/31/x1 work-in-process inventory:
Direct material:
 number of   cost per 

   
 equivalent   equivalent 
 units of    unit of  ........................ 300,000$1.25 $375,000
   
 direct material  direct material
Conversion:

   
 units of    unit of  .................................. 150,000$3.52 528,000
   
 conversion   conversion 
Total cost of 12/31/x1 work in process ..................................................... $903,000
Check: Cost of goods completed and transferred out ........................... $4,293,000

Cost of 12/31/x1 work-in-process inventory .............................. 903,000
Total costs accounted for ............................................................ $5,196,000
The cost of the ending work-in-process inventory is $903,000
Ending finished-goods inventory: Of the 900,000 units completed during 20x1,

200,000 units remain in finished-goods inventory on December 31, 20x1. Therefore:
$4,293,000(200,000 ÷ 900,000) = $954,000*
The cost of the ending finished-goods inventory is $954,000.
*Also, $954,000 = 200,000$4.77 per unit

1. Physical
Units
Work in process, June 1 ........................................................................... 50,000
Units started during June ......................................................................... 200,000
Total units to account for .......................................................................... 250,000
Units completed and transferred out during June .................................. 190,000

Work in process, June 30 ......................................................................... 60,000
Total units accounted for .......................................................................... 250,000
2.
Percentage
of
Completion
Work in process, June 1 .......... 50,000 40%
Units started during June ........ 200,000
Total units to account for ......... 250,000

out during June .................... 190,000 100% 190,000 190,000
Work in process, June 30 ........ 60,000 60% 60,000 36,000
Total units accounted for ......... 250,000
Total equivalent units ............... 250,000 226,000
3.
Direct
Work in process, June 1 ................ $120,000 $ 34,400 $154,400
Costs incurred during June .......... 492,500 349,800 842,300
Total costs to account for ............. $612,500 $384,200 $996,700
Equivalent units ............................. 250,000 226,000
Costs per equivalent unit .............. $2.45 $1.70 $4.15

4. Cost of goods completed and transferred out during June:

    ........................ 190,000$4.15 $788,500
Cost remaining in June 30 work-in-process inventory:
Direct material:

   
 equivalent    equivalent  .......................... 60,000$2.45 $147,000
 units of   unit of 
   
Conversion:

   
 equivalent    equivalent  ...................................... 36,000$1.70 61,200
 units of   unit of 
   
 conversion  conversion
Total cost of June 30 work in process ....................................................... $208,200
Check: Cost of goods completed and transferred out .............................. $788,500

Cost of June 30 work-in-process inventory .................................. 208,200
Total costs accounted for ............................................................... $996,700

The missing amounts are shown below. A completed production report follows.
Units started during July ....................................................................................... 45,000

Units completed and transferred out during July ............................................... 50,000
Total equivalent units: conversion ....................................................................... 56,000
Work in process, July 1: conversion .................................................................... $ 79,800

Costs incurred during July: direct material ......................................................... 371,850
Cost per equivalent unit: conversion ................................................................... 13.20
Cost of goods completed and transferred out during July ................................ 1,072,500
Cost remaining in ending work-in-process inventory: direct material .............. 123,750
PRODUCTION REPORT: VESUVIUS TILE COMPANY

Percentage
of
Completion
Work in process, July 1 ................... 20,000 30%
Units started during July ................. 45,000
Total units to account for ................ 65,000

out during July ............................ 50,000 100% 50,000 50,000
Work in process, July 31 ................. 15,000 40% 15,000 6,000
Total units accounted for ................ 65,000 _____ _____
Total equivalent units ...................... 65,000 56,000

Direct
Work in process, July 1 ..................................... $164,400 $ 79,800 $ 244,200
Costs incurred during July ............................... 371,850 659,400 1,031,250
Total costs to account for ................................. $536,250 $739,200 $1,275,450
Equivalent units ................................................. 65,000 56,000
Costs per equivalent unit .................................. $8.25* $13.20† $21.45**
*$8.25 = $536,250 ÷ 65,000

†$13.20 = $739,200 ÷ 56,000
**$21.45 = $8.25 + $13.20
Cost of goods completed and transferred out during July:

     ............................. 50,000$21.45 $1,072,500
Cost remaining in July 31 work-in-process inventory:
Direct material:

   
 units of    unit of  ................................ 15,000$8.25 $ 123,750
   
 direct material   direct material 
Conversion:

   
 units of    unit of  .......................................... 6,000$13.20 79,200
   
Total cost of July 31 work in process ..................................................... $202,950
Check: Cost of goods completed and transferred out .. $1,072,500

Cost of July 31 work-in-process inventory ........ 202,950
Total costs accounted for ................................... $1,275,450

1. a.
Percentage
of
Completion
Work in process, May 1 ................... 25,000 40%
Units started during May ................. 30,000
Units completed and

transferred out during May ......... 35,000 100% 35,000 35,000
Work in process, May 31 ................. 20,000 80% 20,000 16,000
b.
Direct
Total costs to account for $308,000 $2,483,700
Equivalent units 55,000 51,000
Costs per equivalent unit $5.60 $48.70 $54.30*
*$54.30 = $5.60 + $48.70

c. Cost of goods completed and transferred out during May:

     35,000  $54.30 $1,900,500
Cost remaining in May 31 work-in-process inventory:
Direct material:

   
 equivalent   equivalent  ......................20,000  $5.60 $112,000
 units of    unit of 
   
 direct material  direct material
   
Conversion:

   
 equivalent   equivalent  .............................. 16,000  $48.70 779,200
 units of    unit of 
   
 conversion  conversion
   
Total cost of May 31 work in process.................................................... $891,200
Check: Cost of goods completed and transferred out ............................ $1,900,500

Cost of May 31 work-in-process inventroy ................................ 891,200
Total costs accounted for ............................................................. $2,791,700
2. Journal entry:
Finished-Goods Inventory .............................................. 1,900,500

1,900,500
Work-in-Process Inventory ................................................................. 1,900,500

1.
Physical
Units
Work in process, April 1 ........................................................................... 10,000
Units started during April ......................................................................... 100,000
Total units to account for ......................................................................... 110,000
Units completed and transferred out during April .................................. 80,000

Work in process, April 30 ......................................................................... 30,000
Total units accounted for .................................................................................... 110,000
2.
Percentage
of
Completion
Work in process, April 1 .................. 10,000 20%
Units started during April ................ 100,000
Units completed and

transferred out during April ........ 80,000 100% 80,000 80,000
Work in process, April 30 30,000 33 1/3% 30,000 10,000
Total units accounted for ................ 110,000 ______ _____
3.
Direct
Work in process, April 1 .................................... $ 22,000 $ 4,500 $ 26,500
Costs incurred during April .............................. 198,000 158,400 356,400
Total costs to account for ................................. $220,000 $162,900 $382,900
Costs per equivalent unit .................................. $2.00 $1.81 $3.81

4. Cost of goods completed and transferred out during April:
 numberof units  total cost per 

     ..............................
80,000$3.81 $304,800
Cost remaining in April 30 work-in-process inventory:
Direct material:

   
 units of    unit of  .................................
30,000$2.00 $60,000
   
Conversion:

   
 units of    unit of  ...........................................
10,000$1.81 18,100
   
Total cost of April 30 work-in-process ................................................... $78,100
Check: Cost of goods completed and transferred out ........................ $304,800

Cost of April 30 work-in-process inventory ............................ 78,100
Total costs accounted for ........................................................ $382,900

1.
Percentage
of
Completion
Work in process, August 1 .............. 40,000 80%
Units started during August ............ 80,000
Total units to account for ................. 120,000

out during August ........................ 100,000 100% 100,000 100,000
Work in process, August 31 ............ 20,000 30% 20,000 6,000
Total units accounted for ................. 120,000 ______ ______
Total equivalent units ....................... 120,000 106,000
2.
Direct
Total costs to account for $138,000 $1,089,680
Equivalent units 120,000 106,000
Costs per equivalent unit $1.15 $10.28 $11.43*
*$11.43 = $1.15 + $10.28
3. Cost of goods completed and transferred out during August:

     .............................
100,000$11.43 $1,143,000

4. Cost remaining in August 31 work-in-process inventory:
Direct material:

   
 units of    unit of  .................................20,000$1.15 $23,000
   
Conversion:

   
 units of    unit of  ...........................................6,000$10.28 61,680
   
Total cost of August 31 work in process .................................................... $ 84,680
Check: Cost of goods completed and transferred out .............................. $1,143,000

Cost of August 31 work-in-process inventory .............................. 84,680
Total costs accounted for: .............................................................. $1,227,680
5. Journal entry:
Finished-Goods Inventory ................................................ 1,143,000

Work-in-Process Inventory ..................................... 1,143,000

1. Direct material cost was $1,404,000:
XY634……….. $ 267,000
AA788………. 689,000
GU321………. 448,000
Total……. $1,404,000
Goodson’s total direct-labor payroll amounted to $126,500 for 6,325 hours of work
($126,500 ÷ $20 per hour). Thus, conversion cost was $506,000:
Direct labor……………………………….…….. $126,500

Overhead applied (6,325 hours x $60)…….. 379,500
Total………………………………………….. $506,000
2. Goods completed during April cost $1,872,000 (24,000 units x $78) as the following
calculations show:
Percentage
Of
Completion Equivalent Units
With
Work in process, April 1………………. 4,000 75%

Units started during April…………….. 25,000
Total units to account for…………….. 29,000

out during April…………………….. 24,000 100% 24,000 24,000
Work in process, April 30…………….. 5,000 40% 5,000 2,000
Total units accounted for……………... 29,000
Total equivalent units………………….. 29,000 26,000

Direct
Work in process, April 1…………………… $ 220,000 $ 66,000 $ 286,000

Costs incurred during April………………. 1,404,000 506,000 1,910,000
Total costs to account for…………………. $1,624,000 $572,000 $2,196,000
Equivalent units……………………………... 29,000 26,000
Cost per equivalent unit…………………… $56a $22b $78c
a$1,624,000 ÷ 29,000 = $56

b$572,000 ÷ 26,000 = $22
c$56 + $22 = $78
3. The cost of the ending work-in-process inventory is $324,000:
Direct material (5,000 x $56)…….. $280,000

Conversion cost (2,000 x $22)….. 44,000
Total……………………………. $324,000
4. (a) No material would be added during May. All material is introduced at the start
of Goodson’s manufacturing process, and these units were begun in April.
(b) Since the work-in-process inventory is 40% complete at the end of April, 60%
of the conversion would be done in May.
5. Given that the ending work-in-process inventory is at the 40% stage of completion,
these units would not have reached the 70% point in April where HH887 is added.
Therefore, there would be zero equivalent units with respect to part HH887 in the
ending work-in-process inventory.

1. The ending work-in-process inventory consisted of 500 units (300 + 900 – 700).
2. The cost of goods completed during June totaled $57,400 (700 units x $82):
Percentage
Of
Completion Equivalent Units
With
Work in process, June 1………………. 300 30%

Units started during June…………….. 900
Total units to account for……………... 1,200

during June………………………….. 700 100% 700 700
Work in process, June 30……………... 500 60% 500 300
Total units accounted for……………… 1,200
Total equivalent units………………….. 1,200 1,000
Direct
Work in process, June 1…………………… $15,000 $ 6,300 $21,300

Costs incurred during June………………. 45,000 25,700 70,700
Total costs to account for…………………. $60,000 $32,000 $92,000
Equivalent units……………………………... 1,200 1,000
Cost per equivalent unit……………………. $50a $32b $82c
a$60,000 ÷ 1,200 = $50

b$32,000 ÷ 1,000 = $32
c$50 + $32 = $82
Finished-Goods Inventory…………………………… 57,400

Work-in-Process Inventory…………………. 57,400
3. The cost of the June 30 work-in-process inventory is $34,600:
Direct materials (500 x $50)……... $25,000

Conversion cost (300 x $32)…….. 9,600
Total……………………………… $34,600

4. Equivalent units measure the amount of manufacturing activity (i.e., for direct
material or conversion) that has been applied to a batch of physical units. If, for
example, a company has 600 physical units in process that are 40% complete as to
conversion, the firm has done the equivalent amount of conversion activity as would
be required to do all of the conversion work for 240 units (600 x 40%).
Equivalent units are needed to state manufacturing activity on a common

measurement scale. One cannot add completed units to units in process. Such a
combination is like adding apples and oranges, as some units are complete and
some are incomplete. Instead, these units are first converted to equivalent units,
and the latter are then used in unit-cost calculations.

The missing amounts are shown below. A completed production report follows.
Work in process, May 1 (in units) ......................................................................... 15,000

Units completed and transferred out during May ............................................... 65,000
Total equivalent units: conversion ....................................................................... 71,000
Work in process, May 1: conversion .................................................................... $ 37,500

Costs incurred during May: direct material ......................................................... 570,000
Cost per equivalent unit: conversion ................................................................... 12.25
Cost of goods completed and transferred out during May ................................ 1,407,250
Cost remaining in ending work-in-process inventory: direct material .............. 94,000
PRODUCTION REPORT: HERCULES TIRE AND RUBBER COMPANY

Percentage
of
Completion
Work in process, May 1 ................. 15,000 20%
Units started during May ............... 60,000
Total units to account for .............. 75,000

out during May..................... 65,000 100% 65,000 65,000
Work in process, May 31 ............... 10,000 60% 10,000 6,000
Total units accounted for .............. 75,000 _____ _____
Total equivalent units .................... 75,000 71,000

Direct
Work in process, May 1 ................. $135,000 $ 37,500 $ 172,500
Costs incurred during May ........... 570,000 832,250 1,402,250
Total costs to account for ............. $705,000 $869,750 $1,574,750
Costs per equivalent unit .............. $9.40* $12.25† $21.65**
*$9.40 = $705,000 ÷ 75,000

†$12.25 = $869,750 ÷ 71,000
**$21.65 = $9.40 + $12.25

Cost of goods completed and transferred out during May:

     ............................... 65,000$21.65 $1,407,250
Cost remaining in May 31 work-in-process inventory:
Direct material:

   
 units of    unit of  ................................. 10,000$9.40 $94,000
   
Conversion:

   
 units of    unit of  ........................................... 6,000$12.25 73,500
   
Total cost of May 31 work-in-process ............................................................... $167,500
Check: Cost of goods completed and transferred out ...... $1,407,250

Cost of May 31 work-in-process inventory............ 167,500
Total costs accounted for ....................................... $1,574,750

1. a.
Percentage
of
Completion
with Respect
Tax to
Returns Conversion
(physical (labor and Equivalent Units
units) overhead) Labor Overhead
Returns in process, February 1 ..... 200 25%
Returns started in February ........... 825
Total returns to account for ........... 1,025
Returns completed
during February ........................ 900 100% 900 900
Returns in process, February 28 ... 125 80% 100 100
Total returns accounted for ........... 1,025 ____ ____
Total equivalent units of activity ... 1,000 1,000
b.
Labor Overhead Total
Returns in process, February 1 ................... £ 6,000 £ 2,500 £ 8,500
Costs incurred during February .................. 89,000 45,000 134,000
Total costs to account for ............................ £95,000 £47,500 £142,500
Equivalent units ............................................ 1,000 1,000
Costs per equivalent unit ............................. £95.00 £47.50 £142.50
2. Cost of returns in process on February 28:
Labor: equivalent unitscost per equivalent unit

100£95.00 ....................................................... £ 9,500
Overhead: equivalent unitscost per equivalent unit
100£47.50 ....................................................... 4,750
Total cost of returns in process on February 28 ......................................... £14,250

1. PRODUCTION REPORT: MIXING DEPARTMENT

(Weighted-Average Method)
Percentage
of
Completion
Work in process, November 1....... 4,000 75%
Units started during November .... 16,000
Total units to account for .............. 20,000

out during November .......... 15,000 100% 15,000 15,000
Work in process, November 30 5,000 20% 5,000 1,000
Total units accounted for .............. 20,000 ____ _ _ ____
Total equivalent units .................... 20,000 16,000
Direct
Work in process, November 1....... $ 22,800 $ 46,510 $ 69,310
Costs incurred during November . 81,600* 196,690† 278,290
Total costs to account for ............. $104,400 $ 243,200 $347,600
Costs per equivalent unit .............. $5.22 $15.20 $20.42
*$81,600 = $10,000 + $51,000 + (4,000 ÷ 10,000)($51,500)

†$196,690 = $103,350 + (.40)($103,350) + $52,000

Cost of goods completed and transferred out during November:

     ............................. 15,000$20.42 $306,300
Cost remaining in November 30 work-in-process inventory
Direct material:
   
 units of    unit of  ................................. 5,000$5.22 $26,100
   
Conversion
   
 units of    unit of  ........................................... 1,000$15.20 15,200
   
Total cost of November 30 work in process .................................................... $41,300
Check: Cost of goods completed and transferred out ........ $306,300

Cost of November 30 work-in-process inventory ... 41,300
Total costs accounted for ........................................ $347,600
2. a. Work-in-Process Inventory: Mixing Department ............ 81,600

Raw-Material Inventory ........................................... 81,600
b. Work-in-Process Inventory: Mixing Department ............ 103,350

Wages Payable ........................................................ 103,350
c. Work-in-Process Inventory: Mixing Department ............ 93,340*

Manufacturing Overhead ........................................ 93,340
*$93,340 = (.40)($103,350) + ($52,000)
d. Work-in-Process Inventory: Finishing Department ........ 306,300

Work-in-Process Inventory: Mixing Department .. 306,300

1. The unit costs and total costs for each of the products manufactured by Plasto
Corporation during the month of May are calculated as follows:
Extrusion Form Trim Finish

Units produced ..................... 16,000 11,000 5,000 2,000
Material costs ....................... $192,000 $ 44,000 $15,000 $12,000
Unit material cost .......... 12.00 4.00 3.00 6.00
Conversion costs* ................ 392,000 132,000 69,000 42,000
Unit conversion cost ..... 24.50 12.00 13.80 21.00
*Direct labor and manufacturing overhead.

Plastic Standard Deluxe Executive

Unit Costs Sheets Model Model Model
Material costs:
Extrusion ........................ $12.00 $12.00 $12.00 $12.00
Form ............................... 4.00 4.00 4.00
Trim ................................ 3.00 3.00
Finish.............................. 6.00
Conversion costs:
Extrusion ........................ 24.50 24.50 24.50 24.50
Form ............................... 12.00 12.00 12.00
Trim ................................ 13.80 13.80
Finish.............................. _ _ _ 21.00
Total unit cost ....................... $36.50 $52.50 $69.30 $96.30
Units produced .....................  5,000  6,000  3,000  2,000
Total product cost*............... $182,500 $315,000 $207,900 $192,600
*Total costs accounted for:
Product Total Product Costs

Plastic sheets $182,500
Standard model 315,000
Deluxe model 207,900
Executive model 192,600
Total $898,000
2. Journal entries:
Work-in-Process Inventory: Extrusion ............................. 584,000

Raw-Material Inventory ............................................ 192,000
Applied Conversion Costs ...................................... 392,000
Finished-Goods Inventory ................................................. 182,500

Work-in-Process Inventory: Extrusion ................... 182,500
Work-in-Process Inventory: Forming ............................... 577,500

Work-in-Process Inventory: Extrusion ................... 401,500


Work-in-Process Inventory: Forming ..................... 315,000
Work-in-Process Inventory: Trimming ............................. 346,500

Work-in-Process Inventory: Forming ..................... 262,500

Work-in-Process Inventory: Trimming ................... 207,900
Work-in-Process Inventory: Finishing .............................. 192,600

Work-in-Process Inventory: Trimming ................... 138,600

Work-in-Process Inventory: Finishing ................... 192,600

1. Conversion cost per unit in department I:
direct labor  manufacturing overhead


units produced*
$38,000  $230,000

11,000  4,000  5,000
 $13.40 per uni t
*Note that all of the products sold after processing in departments I, II, or III were
produced orginally in department I.
2. Conversion cost per unit in department II:

direct labor  manufacturing overhead

units produced*
$22,000  $68,000

4,000  5,000
 $10.00 per unit
*Note that all of the products sold after processing in departments II and III were
colored in department II.
3. Cost of a clear glass sheet:

direct material per conversion cost per
= unit in department I + unit in department I
$450,000
  $13.40
20,000
 $35.90 per sheet

4. Cost of an unetched, colored glass sheet:

cost per clear direct material conversion cost per
= glass sheet + per unit in department II + unit in department II
$72,000
 $35.90   $10.00
9,000
5. Cost of an etched, colored glass sheet:

cost per unetched conversion cost per
= colored glass sheet + unit in department III
$38,000  $73,750
 $53.90 
5,000
1. Conversion costs:
Rolling Molding Punching Dipping

Direct labor .................................. $300,000 $112,000 $128,000 $ 45,000
Manufacturing overhead .............. 450,000 168,000 192,000 67,500
Total conversion cost................... $750,000 $280,000 $320,000 $112,500
Total units produced:

Rolling only ............................ 20,000
Rolling, molding, punching 8,000 8,000
Rolling, molding, punching,
dipping ............................... 3,000
Conversion cost per unit ............. $37.50 $35.00 $40.00 $37.50

2. Product costs:
Ceralam
Sheets
Sold Nonreflective Reflective
after Ceralam Ceralam Total
Rolling Housings Housings Costs
Direct material:
Ceralam sheets .................... $480,000 $200,000 $120,000 $ 800,000
Chemical dip ....................... 30,000 30,000
Conversion costs:
Rolling .................................. 450,000a 187,500a 112,500a 750,000
Molding ................................ 175,000b 105,000b 280,000
Punching.............................. 200,000c 120,000c 320,000
Dipping ................................ _______ ________ 112,500d 112,500
Total cost .................................... $930,000 $762,500 $600,000 $2,292,500
Units manufactured.................... 12,000 5,000 3,000
Unit cost ...................................... $77.50 $152.50 $200.00
aNumber of unitsrolling cost per unit ($37.50)

bNumber of unitsmolding cost per unit ($35.00)
cNumber of unitspunching cost per unit ($40.00)
dNumber of unitsdipping cost per unit ($37.50)
3. Journal entries:
Work-in-Process Inventory: Rolling ...............................................

1,550,000
Raw-Material Inventory ......................................................... 800,000*
Applied Conversion Costs .................................................... 750,000†
*$800,000 = direct-material cost for ceralam sheets

†$750,000 = conversion cost in rolling operation

Finished-Goods Inventory ...............................................................

930,000*
Work-in-Process Inventory: Rolling ..................................... 930,000
*$930,000 = 12,000 ceralam sheets sold after

rolling$77.50 per unit
Cost of Goods Sold..........................................................................

930,000*
Finished-Goods Inventory .................................................... 930,000
*$930,000 = cost of ceralam sheets sold after

rolling
Work-in-Process Inventory: Molding ..............................................

620,000*
Work-in-Process Inventory: Rolling ..................................... 620,000
*$620,000 = cost remaining in Work-in-Process

Inventory: Rolling
= $1,550,000 – $930,000
Work-in-Process Inventory: Molding ..............................................

280,000*
Applied Conversion Costs .................................................... 280,000
*$280,000 = conversion cost in molding operation
Work-in-Process Inventory: Punching ...........................................

900,000*
Work-in-Process Inventory: Molding.................................... 900,000

Inventory: Molding
= $620,000 + $280,000
Work-in-Process Inventory: Punching ...........................................

320,000*
Applied Conversion Costs .................................................... 320,000
*$320,000 = conversion cost in punching operation


762,500*
Work-in-Process Inventory: Punching ................................. 762,500
*$762,500 = 5,000 nonreflective ceralam housings

sold after punching$152.50 per unit
Cost of Goods Sold..........................................................................

762,500*
*$762,500 = cost of nonreflective ceralam

housings sold after punching
Work-in-Process Inventory: Dipping ..............................................

457,500*
Work-in-Process Inventory: Punching ................................. 457,500

Inventory: Punching
= $900,000 + $320,000 – $762,500
Work-in-Process Inventory: Dipping ..............................................142,500

Raw-Material Inventory .......................................................... 30,000*
Applied Conversion Costs .................................................... 112,500†
*$30,000 = direct-material cost for chemical dip

†$112,500 = conversion cost in dipping operation

600,000*
Work-in-Process Inventory: Dipping .................................... 600,000
*$600,000 = 3,000 reflective ceralam housings

sold after dipping$200.00 per unit
Cost of Goods Sold..........................................................................600,000


1. a. Cost of units completed and transferred to finished-goods inventory during

May:
Units completed and transferred out.............................................. 11,900

Total cost per equivalent unit .........................................................  _ $9.00
Cost of units completed and transferred out ................................. $107,100
b. To compute the cost of the Finishing Department's work-in-process inventory

on May 31, first determine the number of units in ending work-in-process
inventory, as follows:
Work-in-process inventory, May 1 (in units) .................................. 1,400

Add: Units transferred in ................................................................. 14,000
Units to account for ......................................................................... 15,400
Less: Units transferred to finished goods ..................................... 11,900
Work-in-process inventory, May 31 (in units) ................................ 3,500
Then compute the transferred-in, direct-material, and conversion costs in the

May 31 work-in-process inventory:
Cost per
Equivalent Equivalent
Input Units Unit Cost
Transferred-in .....................................................
3,500  $5.00 = $17,500
Direct material ....................................................
3,500  $1.00 = 3,500
Conversion .........................................................
3,50040%  $3.00 = 4,200
Total cost of May 31 work-in-process inventory .............................................
$25,200
2. Equivalent units of transferred-in costs................................................... 15,400

Transferred-in cost per equivalent unit ....................................................  $5.00
Total transferred-in cost ............................................................................ $77,000
Deduct: Transferred-in cost in May 1 work-in-process inventory .......... 6,750
Total cost transferred in from the Assembly Department ...................... $70,250
Journal entry to record transfer:
Work-in-Process Inventory: Finishing Department .......................70,250

Work-in-Process Inventory: Assembly Department ............... 70,250

SOLUTIONS TO CASES
CASE 4-42 (45 MINUTES)
1. Equivalent units of material .................................................................................... 8,000

Equivalent units of conversion ............................................................................... 7,500
2. Cost per equivalent unit of material ....................................................................... $3.30

Cost per equivalent unit of conversion .................................................................. $2.80
3. October 31 work-in-process inventory ...................................................................$4,700

Cost of goods completed and transferred out....................................................... $42,700
4. Weighted-average unit cost of completed leather belts ....................................... $6.10
These answers are supported by the following process-costing schedules. The firm's cost
per belt used for planning and control, $5.35, is substantially lower than the actual cost per
belt incurred in October, $6.10. Management should investigate this situation to determine
whether production costs can be reduced. If not, then the cost used for planning and
control purposes should be changed to reflect the firm's actual experience.
CALCULATION OF EQUIVALENT UNITS: LAREDO LEATHER CO. - DALLAS PLANT

Percentage
of
Completion
Work in process, October 1 ............ 400 25%
Units started during October .......... 7,600

out during October ........................ 7,000 100% 7,000 7,000
Work in process, October 31 .......... 1,000 50% 1,000 500
Total units accounted for ................ 8,000

CASE 4-42 (CONTINUED)
CALCULATION OF COSTS PER EQUIVALENT UNIT: DALLAS PLANT

Direct
Work in process, October 1 .............................. $ 1,250 $ 300 $ 1,550
Costs incurred during October ......................... 25,150 20,700 45,850
ANALYSIS OF TOTAL COSTS: DALLAS PLANT

Cost of goods completed and transferred out during October:

     ............................. 7,000$6.10 $42,700
Cost remaining in October 31 work-in-process inventory:
Direct material:

   
 units of    unit of  ................................ 1,000$3.30 $3,300
   
Conversion:

   
 units of    unit of  .......................................... 500$2.80 1,400
   
Total cost of October 31 work in process ............................................... $4,700

Check: Cost of goods completed and transferred out ...... $42,700

Cost of October 31 work-in-process inventory ..... 4,700
Total costs accounted for ....................................... $47,400
5. If the units were 60 percent complete as of October 31, there would be 7,600
equivalent units with respect to conversion. (To see this, just change the 500 in the
right-hand column of the table in the solution to requirement (4) to 600. This
changes the last number in the right-hand column from 7,500 to 7,600.)
Now the unit cost of conversion drops from $2.80, as currently computed,
to $2.76 (rounded, $21,000 ÷ 7,600). Thus, the unit cost drops from $6.10 to $6.06
(rounded).
As controller, Jeff Daley has an ethical obligation to refuse his friend's

request to alter the estimate of the percentage of completion. What Daley can do is
to help Murray think of some legitimate ways to bring about real cost reductions.
Several ethical standards for management accountants (listed in Chapter 1) apply
in this situation. Among the relevant standards are the following:
Competence:
 Prepare complete and clear reports and recommendations after appropriate

analyses of relevant and reliable information.
Objectivity:
 Communicate information fairly and objectively.
 Disclose fully all relevant information that could reasonably be expected to

influence an intended user's understanding of the reports, comments, and
recommendations presented.

CASE 4-43 (60 MINUTES)
PRODUCTION REPORT: HOME GARDEN COMPANY - GRADING DEPARTMENT

Percentage
of
Completion
Work in process, November 1 ......... -0- —
Units started during November ...... 36,000

out during November.................. 36,000 100% 36,000 36,000
Work in process, November 30 ....... -0- — -0- -0-
Direct
Work in process, November 1 ........................... -0- -0- -0-
Costs incurred during November ..................... $265,680 $86,400 $352,080
Cost of goods completed and transferred out of the Grading Department

during November:

     ............................. 36,000$9.78 $352,080
Cost remaining in November 30 work-in-process inventory in the

Grading Department ..................................................................................... -0-
Check: Cost of goods completed and transferred out ............. $352,080

Cost of November 30 work-in-process inventory ........ -0-
Total costs accounted for .............................................. $352,080

PRODUCTION REPORT: HOME GARDEN COMPANY - SATURATING DEPARTMENT

Percentage
of
Completion
Physical Respect to Transferred
Units Conversion in Conversion
Work in process, November 1 ......... 1,600 50%
Units transferred in during November 36,000

out during November.................. 35,600 100% 35,600 35,600
Work in process, November 30 ....... 2,000 50% 2,000 1,000
Transferred
In Conversion Total
Work in process, November 1 ........................... $ 13,850 $ 3,750 $ 17,600
Costs incurred during November ..................... 352,080* 85,920 438,000
*Cost of goods completed and transferred out of Grading Department during November,
under the weighted-average method.

Cost of goods completed and transferred out of the Saturating

Department during November:

     .............................35,600$12.1822 $433,686†
Cost remaining in November 30 work-in-process inventory in the

Saturating Department:
Transferred-in costs:
 number of   transferred-in 
   
 equivalent   cost per 
 units of    equivalent  .......................... 2,000$9.7322 $19,464†
   
 transferred-in cost   unit 
Direct material:
None
Conversion:
 number of   conversion
   
 equivalent   cost per 
 units of    equivalent  .......................................... 1,000$2.45 2,450
   
 conversion   unit 
Total cost of November 30 work in process ........................................... $21,914
Check: Cost of goods completed and transferred out ............. $433,686

Cost of November 30 work-in-process inventory ........ 21,914
Total costs accounted for .............................................. $455,600
†Rounded

CURRENT ISSUES IN MANAGERIAL ACCOUNTING
ISSUE 4-44
"BOTTLED UP: PROFITS AREN'T FLOWING LIKE THEY USED TO AT PACKAGED-GOODS
COMPANIES. GREEN KETCHUP AND TUNA IN A POUCH SAVE HEINZ?, " FORTUNE,
SEPTEMBER 18, 2000, JULIE CRESWELL.
1. Heinz is a food processor and manufactures large quantities of relatively

homogeneous products. Thus, process costing would be an appropriate product
costing system for Heintz.
2. Heinz has recently begun to compete for more noticeable and attractive shelve
space, and, after years of neglect, the company has begun to market and package to
reflect the growing demographic changes in America. By bringing on the StarKist
Tuna in a Pouch it has recognized that eating habits have changed in America. The
green ketchup in an EZ Squirt bottle is an attempt to gain a young audience because
eating habits begin early. Fruit and Vegetable Wash is a new product offering.
ISSUE 4-45
“INTERNATIONAL PAPER SHUTTING PLANTS TO CUT SUPPLY,” THE WALL STREET
JOURNAL, OCTOBER 19, 2000, ALLANNA SULLIVAN.
1. International paper would use process costing since they produce large
quantities of relatively homogeneous products.
2. Paper supply costs and total production costs should be reduced. The fixed
costs of the closed plants would be eliminated while the fixed costs of the
remaining plants would remain stable. Production of the remaining plants would
increase.
ISSUE 4-46
“U.S. IS UNLIKELY TO RELEASE MORE OIL SOON,” THE WALL STREET JOURNAL,
OCTOBER 19, 2000, JOHN J. FLAKA. ALSO SEE “NO SURGE IN CRUDE DELIEVERIES
EXPECTED,” THE WALL STREET JOURNAL, OCTOBER 16, 2000, BHUSHAN BAHREE.
1. The government's release of 30 million gallons of crude oil is only about one
day's supply of oil for the United States, so I would have a negligible effect on the
oil companies.
2. Oil companies would use process costing since they produce large quantities of
relatively homogeneous products.

ISSUE 4-47
“GEORGIA-PACIFIC PROFIT DECLINES BY 43 PERCENT: SLUGGISH BUILDING PRODUCTS

SECTOR CITED,” THE WALL STREET JOURNAL, OCTOBER 19, 2000, BETSY MCKAY.
1. Georgia-Pacific would use process costing since the company produces large
quantities of relatively homogeneous products.
2. Lower prices for building materials would not directly affect the company’s
product costs, but lower prices would pressure management to attempt to
reduce product costs in order to remain price competitive in a weakening market.


Chapter 4 Solution..

Uploaded by

Copyright:

Available Formats

Chapter 4 Solution..

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Chapter 4 Solution..

Uploaded by

Copyright:

Available Formats

CHAPTER 4

Process Costing and Hybrid Product-Costing

ANSWERS TO REVIEW QUESTIONS

4-2 Process costing would be an appropriate product-costing system in the following

4-3 Process costing could be used in the following nonmanufacturing enterprises:

4-4 Product-costing systems are used for the following purposes:

(c) In reporting to interested organizations: Product cost information is used to

McGraw-Hill/Irwin  2002 The McGraw-Hill Companies, Inc.

McGraw-Hill/Irwin  2002 The McGraw-Hill Companies, Inc.

4-14 The departmental production report is the key document in a process-costing

McGraw-Hill/Irwin  2002 The McGraw-Hill Companies, Inc.

The general formula for all three cases is the following:

Work-in-process, + Units started – Units completed = Work-in-process,

Using this formula, the missing amounts are:

EXERCISE 4-17 (30 MINUTES)

All three of these companies manufacture large numbers of relatively homogeneous

McGraw-Hill/Irwin  2002 The McGraw-Hill Companies, Inc.

1. 6,000 equivalent units (refer to (a) in the following table)

2. 4,400 equivalent units (refer to (b) in the following table)

CALCULATION OF EQUIVALENT UNITS: RAINBOW GLASS COMPANY

Units completed and transferred

EXERCISE 4-19 (15 MINUTES)

CALCULATION OF EQUIVALENT UNITS: TERRA ENERGY COMPANY - LODI PLANT

Units completed and transferred

McGraw-Hill/Irwin  2002 The McGraw-Hill Companies, Inc.

CALCULATION OF EQUIVALENT UNITS: FIT-FOR-LIFE FOODS CORPORATION

Unit completed and transferred

EXERCISE 4-21 (15 MINUTES)

CALCULATION OF COST PER EQUIVALENT UNIT: IDAHO LUMBER COMPANY

*$70 = $490,000 ÷ 7,000

McGraw-Hill/Irwin  2002 The McGraw-Hill Companies, Inc.

CALCULATION OF COST PER EQUIVALENT UNIT: OTSEGO GLASS COMPANY

*$11.00 = $187,000 ÷ 17,000

McGraw-Hill/Irwin  2002 The McGraw-Hill Companies, Inc.

SAVANNAH TEXTILES COMPANY

1. Cost of goods completed and

2. Cost remaining in September 30

Direct material (10,000*$4.30) $43,000

*Equivalent units in September 30 work in process:

McGraw-Hill/Irwin  2002 The McGraw-Hill Companies, Inc.

TULSA PAPERBOARD COMPANY

1. Cost of goods completed and

2. Cost remaining in February 28 work

Direct material (20,000*$1.05) . $ 21,000

*Equivalent units in February 28 work in process:

McGraw-Hill/Irwin  2002 The McGraw-Hill Companies, Inc.

1. Diagram of production process:

Batch P25 Batch S33

Accumulated Conversion costs:

Batch P25 Batch S33

McGraw-Hill/Irwin  2002 The McGraw-Hill Companies, Inc.

2. The product cost for each basketball is computed as follows:

Work-in-Process Inventory: Preparation Department .......... 39,500*

*$39,500 = $42,000 of direct material

Work-in-Process Inventory: Preparation Department .......... 45,000*

*Direct-material cost for batch S33.

Work-in-Process Inventory: Preparation Department .......... 45,000*

*$45,000 = 6,000 units$7.50 per unit

Work-in-Process Inventory: Finishing Department .............. 129,500*