Series 13 DIR-ACT™

Direct Mount
3-Piece Ball Valve
Design Features
• Full Port
• 1000 CWP (1/4” - 2”), 600 CWP (2-1/2” - 4”),
150 WSP
• 316 Stainless Steel ASTM A351 CF8M
• Carbon Steel ASTM A216 WCB Threaded and
Socket Weld Ends, Stainless Steel ASTM A351
CF8M Threaded, Socket Weld and Schedule 10
or 40 Butt Weld Ends
• Direct Mount Pad Eliminates
Need for Brackets and Couplings*
• Low Profile, Space Saving Design
• Live Loaded, Blow-Out Proof Stem
• Patented System Allows Adjustment of Stem
Packing Nut With Actuator In Place
(U.S. Patent No. 6,446,935 B1)
• Lockable, Reversible, Lever Handle

Applicable Standards
• Mounting Dimensions ISO 5211
• Socket Weld & Threaded Ends ASME B16.11
• Butt-Weld Ends ASME B16.25
• Shell and Seat Pressure Test ASME B16.34

Options
• 4X4 Pneumatic Four Piston Actuator
• SPN II Pneumatic Two Piston Actuator
• SEA Electric Actuator
USA 800-766-0076
• Solenoids
Fax 323-890-4456
• Limit Switches
www.smithcooper.com
www.sharpevalves.com
Los Angeles, CA
Chicago, IL
Atlanta, GA *Mounting Bracket Must be Used for High Temperature (>180o F) and
Steam Applications
Vancouver, WA
Houston, TX Page 1 of 4
 Series 13 DIR-ACT™
Direct Mount 3-Piece Ball Valve
Dimensions

Dimensions (Inches)

Size PORT A C D E F G ØH ØI J K M
1/4 0.46 2.65 4.92 2.65 1.97 1.50 0.31 F03 (1.42)* F05 (1.97) 0.130 0.110 0.350
3/8 0.50 2.65 4.92 2.65 1.97 1.50 0.31 F03 (1.42)* F05 (1.97) 0.130 0.110 0.350
1/2 0.59 2.83 4.92 2.65 1.97 1.50 0.31 F03 (1.42)* F05 (1.97) 0.130 0.110 0.350
3/4 0.79 3.35 4.92 2.89 1.97 1.85 0.40 F04 (1.65) F05 (1.97) 0.118 0.118 0.350
1 1.00 3.62 7.48 3.19 2.76 2.20 0.44 F05 (1.97) F07 (2.76) 0.177 0.138 0.350
1-1/4 1.26 4.33 7.48 3.58 2.76 2.60 0.60 F05 (1.97) F07 (2.76) 0.177 0.138 0.430
1-1/2 1.50 4.83 7.48 3.80 2.76 2.81 0.54 F05 (1.97) F07 (2.76) 0.177 0.138 0.430
2 2.00 5.58 7.48 4.15 2.76 3.17 0.54 F05 (1.97) F07 (2.76) 0.177 0.138 0.430
2-1/2 2.56 6.84 9.84 5.99 4.02 3.84 0.79 F07 (2.76)** F10 (4.02) 0.216 0.177 0.665
3 2.95 7.57 9.84 6.42 4.02 4.25 0.79 F07 (2.76)** F10 (4.02) 0.216 0.177 0.665
4 3.94 10.78 14.96 7.05 4.92 4.86 1.00 F10 (4.02) F12 (4.92) 0.256 0.216 0.665
* Slotted bolt holes will accept F03, F04 and F05
** F07 size only for use with a bracket.

The dimensions above are for informational purposes only. Please refer to Sharpe Valves if you need dimensions for construction.
Page 2 of 4
Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com • www.sharpevalves.com
 Series 13 DIR-ACT™
Direct Mount 3-Piece Ball Valve
Parts & Materials

No. Part Name Qty Material

1 Body 1 316 Stainless Steel ASTM A351 CF8M
2 End Pieces 2 Carbon Steel ASTM A216 WCB or
316 Stainless Steel ASTM A351 CF8M
3 Body Seal 2 PTFE
4 Ball 1 316 Stainless Steel
5 Seat 2 TFM or RTFE
6 Stem 1 17-4PH: 1/4” - 2”
316 Stainless Steel: 2-1/2” - 4”
7.1 Thrust Bearing 1 PEEK
7.2 Thrust Bearing* 1 Nova
8 Stem Packing 1 RTFE
9 Gland Packing 1 300 Series Stainless Steel
10 Belleville Washers 4 300 Series Stainless Steel
11 McNut (Packing Nut) 1 300 Series Stainless Steel
12 Set Screw 1 300 Series Stainless Steel
13 Handle Washer** 1 300 Series Stainless Steel
14 Handle 1 300 Series Stainless Steel
15 Handle Sleeve 1 PVC
16 Stem Cover 1 300 Series Stainless Steel
17 Lock Washer 1 300 Series Stainless Steel
18 Stem Bolt 1 300 Series Stainless Steel
19 Bolt/Stud 4 / 6 300 Series Stainless Steel
20 Washer 6 / 12 300 Series Stainless Steel
21 Nut 6 / 12 300 Series Stainless Steel
* Not used on 2-1/2”, 3” or 4”
** Two washers used on 2-1/2”, 3” or 4”

Page 3 of 4
Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com • www.sharpevalves.com
 Series 13 DIR-ACT™
Direct Mount 3-Piece Ball Valve
Technical Information

Break Away* Pressure - Temperature Ratings

Weight
Size Cv Torque 1200
(lbs.)
(in-lbf)
1000
1/4 6 40 1.4 (1/4” - 2”)
3/8 6 40 1.4 800
1/2 24 40 1.4 TFM / RTFE

Pressure (psi)
3/4 35 80 2.0 600
1 47 110 3.4 (2-1/2” - 4”)
1-1/4 81 160 5.4 400
1-1/2 105 190 7.2
2 240 250 11
200
2-1/2 320 500 20
3 580 720 32 0 100 200 300 400 500
4 970 800 51 Temperature (°F)
*Based on clean non-lubricating fluid at listed pressures and
ambient temperature. Call Sharpe Valves for assistance for
other conditions.

How to Order

Ends
Size Series Body Ball & Stem Seat
Material Connection
1/4 13 6 316 Stainless Steel 4 Carbon Steel TE Threaded M TFM
3/8 SW Socket Weld R RTFE
1/2
3/4
1
1-1/4 6 316 Stainless Steel TE Threaded
1-1/2 SW Socket Weld
2 BW Butt-weld (Sch 40)
2-1/2 BW10 Butt-weld (Sch 10*)
3
4
Example: 1/4 = 13 = 6 = 6 = TE = M = 1/4”-13-6-6-TE-M

*Price on Application

Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.

01/18 Page 4 of 4
Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com • www.sharpevalves.com