Scribd
Upload
45 views

Tutorial 1: User Interface

1. The document provides step-by-step instructions for creating a topographic survey in Land Desktop software, including importing point data, creating point groups and surfaces, and generating contours. 2. It describes how to set up a new project, import point data from a CSV file, build a surface from point groups, import 3D lines, and create and style contours. 3. The tutorial notes that some points may need to be deleted and the surface rebuilt if errors are present in the contour output.

Uploaded by

ryabs
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
45 views

Tutorial 1: User Interface

1. The document provides step-by-step instructions for creating a topographic survey in Land Desktop software, including importing point data, creating point groups and surfaces, and generating contours. 2. It describes how to set up a new project, import point data from a CSV file, build a surface from point groups, import 3D lines, and create and style contours. 3. The tutorial notes that some points may need to be deleted and the surface rebuilt if errors are present in the contour output.

Uploaded by

ryabs
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

Anil Kutuwo Introduction to Land Desktop

1. TUTORIAL 1
Drawing in 1:500 scale
Plot point data
Create surface from point group
Create Contours

USER INTERFACE

CREATE NEW FILE


1. File Menu
2. New
3. New Drawing: Project Dialogue box pops up
Select Create Project

Sanima Hydro and Engineering (P.) Ltd. 1–1 June 2016


Anil Kutuwo Introduction to Land Desktop

4. Project Details Dialogue box pops up


Input as shown in figure.

5. Select ok in Project Details dialogue box


6. Input as follow in New Drawing: Project Dialogue box and select acad.dwt template and
select ok.

Sanima Hydro and Engineering (P.) Ltd. 1–2 June 2016


Anil Kutuwo Introduction to Land Desktop

7. Select no when dialogue box prompt for ‘Save changes to Drawing1.dwg?’


8. Select m1000.set (Metric, 1:1000) and click Load button then select next in Load setting
dialogue box.

Sanima Hydro and Engineering (P.) Ltd. 1–3 June 2016


Anil Kutuwo Introduction to Land Desktop

9. Make your setting as shown in screen shots below:

10. After finishing your setting you can save your setting for future. If you want to save provide
your setting name and select finish

Sanima Hydro and Engineering (P.) Ltd. 1–4 June 2016


Anil Kutuwo Introduction to Land Desktop

11. Finish dialogue box pops up showing your setting. Check the dialogue box and click ok.
(Note: these setting can be changed from drawing setup command from project menu)

12. Check the Use Point Names for this tutorial and select ok in Create Point Database dialogue
box

13. Text style


Sd command
Set text height 1.5
Close the diaglogue box

Sanima Hydro and Engineering (P.) Ltd. 1–5 June 2016


Anil Kutuwo Introduction to Land Desktop

POINT IMPORT
1. From point menu go to Import/Export Points and select Import Points Command

2. Select PENZD (comma delimited file) format, PNEZD_BRIDGE.csv file as Source file, and
click ok in Format Manager-Import Points dialogue box.

3. Click ok on COGO Database:Import Options dialogue box.

4. Points will be loaded in autocad window.

Sanima Hydro and Engineering (P.) Ltd. 1–6 June 2016


Anil Kutuwo Introduction to Land Desktop

POINT SETTING
1. Select Point Setting command from Point menu.
2. Change following setting and select ok.

Sanima Hydro and Engineering (P.) Ltd. 1–7 June 2016


Anil Kutuwo Introduction to Land Desktop

REMOVE POINT AND INSERT POINT


1. Select Remove from Drawing.. command from Point Menu.
2. Follow command line. Select yes i.e input y and enter.
3. Select All option i.e. input a and enter.
4. Select Insert Points to Drawing..
5. Select All option i.e. input a and enter.
6. Use Zoom Extend command to view all point in screen.

CREATE ALL POINT GROUP


1. Select Point Group Manager Command as shown in figure

2. Select Create Point Group Command in Point Group Manager Dialogue box

Sanima Hydro and Engineering (P.) Ltd. 1–8 June 2016


Anil Kutuwo Introduction to Land Desktop

3. Provide Group name as All, Description as All survey point, and check Include All Points.

4. Select ok.
5. Close Point Group Manager Dialogue box

CREATE SURFACE
1. Select Terrain Model Explorer… command

2. Right click on Terrain menu and select Create New Surface

Sanima Hydro and Engineering (P.) Ltd. 1–9 June 2016


Anil Kutuwo Introduction to Land Desktop

3. Expand Terrain menu clicking + sign adjacent to Trerrain. Similarly open Surface1and Tin
Data. Right click on Surface1 and Rename it to EG (i.e. existing ground). Note that all the
values are set to zero indicating no data in the EG surface.

4. Right click on Point Groups and select Add Point Group.

5. Select ok.

Note: Any point group data can be selected if number of point group data are created.

Sanima Hydro and Engineering (P.) Ltd. 1–10 June 2016


Anil Kutuwo Introduction to Land Desktop

6. Right Click on EG and select Build command

7. Check whether use point group data are checked on not. If it is unchecked checked it and
select ok.

8. Select ok when dialogue box prompt for Done building surface.


9. Close the Terrain Model Explorer dialogue box.

Sanima Hydro and Engineering (P.) Ltd. 1–11 June 2016


Anil Kutuwo Introduction to Land Desktop

IMPORT 3D LINES
1. Go to Edit Surface in Terrain menu and select Import 3D Lines to plot triangulation line.

2. Select command yes (follow command line)

CREATE CONTOURS
1. Select Create Contours.. command from Terrain menu.

Sanima Hydro and Engineering (P.) Ltd. 1–12 June 2016


Anil Kutuwo Introduction to Land Desktop

2. Ensure following setting and select Style Manager

3. Change different tabs of Contour Style Manager as follow:

Sanima Hydro and Engineering (P.) Ltd. 1–13 June 2016


Anil Kutuwo Introduction to Land Desktop

4. Select Apply and ok.


5. Select ok in Create Contours dialogue box.
6. Follow command line. Select yes option. The contour appears in windows.
In this data there are some errors which can be rectify by erasing some point and again rebuilding
surface. Try to delete point numbers 41, 112, 38, 253, and 161, rebuild the surface, and create
contours.

Sanima Hydro and Engineering (P.) Ltd. 1–14 June 2016

You might also like