Router 6675 Datasheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Router 6675

The Router 6675 is a high capacity pre-aggregation and


aggregation router, designed to enable high quality network
Meeting the strictest radio requirements
service delivery while at the same time lowering operating costs Provides high 10GE density with 100GE support and 320Gbps
through features such as a completely filter-less mechanical switching capacity in a 1RU compact and hardened form factor
design. It provides high 10GE and 100GE port densities in a enabling lower rental costs and lower OPEX.
compact and hardened 1RU form factor enabling lower rental
costs and lower OPEX. It supports VPN services over IP/MPLS
networks, service provider SDN, service exposure using
Precise and proven synchronization
NETCONF/YANG, extensive quality of service and precise LTE-A enhancements such as COMP and e-ICIC that enable
synchronization features. efficient use of spectrum have strict synchronization
The Router 6675 has strong security features such as IPSec, requirements. The Ericsson synchronization solution comes pre-
vendor credential and vendor software authentication ensuring verified to work with Radio.
data security even in insecure environments.
With 320Gbps of switching capacity, the Router 6675 delivers
performance needed to fully support LTE, LTE Advanced, 5G, SDN capabilities and programmability
access sites for years to come. Provides application aware traffic engineering with open and
standardized interfaces, enabling network slicing and ability to
The Router 6675 is part of the Ericsson Router 6000 Series, a tailor services for utmost agility.
radio integrated, service provider SDN enabled and subscriber
aware IP transport family of products. The Router 6000 offers a
range of high-performance routers with resiliency features and Designed for low CAPEX and OPEX
form factors optimized for the various needs of metro and
Router 6000 series uses merchant silicon and a cost optimized
backhaul networks.
design to lower CAPEX. Filter less design removes costly truck
rolls every 3 months to inspect the filters, resulting in $1000
The Ericsson Router 6000 Series is an essential component of
yearly OPEX savings/site.
the Ericsson Radio system and is tightly integrated with Ericsson
Radio and Microwave to provide high capacity mobile backhaul
with unprecedented quality of experience. Strong Security
All routers in the Ericsson Router 6000 Series run the IP
Operating System (IPOS), enabling accelerated feature delivery Strong and complete security solution for Macro cell, Small Cell
and operational efficiencies. and Aggregation in trusted and untrusted environments enables
Ericsson Network Manager (ENM) manages the complete end- ubiquitous deployments.
to-end network for both Mobile and Fixed deployments: Radio,
Metro and Backhaul, Mobile Core, and Data Center. This enables Radio integrated Transport
seamless plug and play capabilities for radio and router
installation and network operation. Provides Radio aware transport for mobile backhaul enabling
improved Quality of Experience for end users. Tight hardware
and mechanical integration as part of Ericsson Radio System
allows significantly easier cell site deployment and lower overall
TCO.
Technical specification for Router 6675
Connectivity
Interfaces: 24x GE / 10GE SFP+ ports
4x QSFP28 ports each can be configured as 4x 10GE, 4x 25GE, 1x 40GE or 1x 100GE
1x 100 / 1000 Base-T Ethernet for Out-of-Band Management
1x RJ45 console port
1x RJ45 Alarm port for 3 input and 1 output alarm contacts
1x USB 2.0 port
Synchronization interfaces: 1x RJ45 port 1PPS+TOD (ITU-T G.703 Amd1)
1x RJ48C port for 2.048 MHz, E1/T1 (BITS) input/output

Mechanical
System weight: 8kg / 17.6lbs
Dimension (H x W x D): 1RU 43.6mm x 442.8mm x 315mm
Air flow: Filter-less design, Front to Back with field swappable fan tray

Electrical
Power supply DC: -48 VDC, dual feed
Power consumption: Typical 150 Watts, Max 225 Watts

Environmental
Operating Temperature: -40°C to 65°C
Relative Humidity: 5 - 95% Non-condensing
GR-3108-CORE Class 1: Controlled Protected Environments
GR-3108-CORE Class 2: Protected Equipment in Outside Environments
EN 300 019-1-3 Class 3.3: Not temperature-controlled locations

Key features
IP Routing MPLS: IPv4, IPv6, BGP-4, MP-BGP, BGP FRR, BGP-LS, IS-IS, OSPFv2/v3, VRRPv2/v3, LFA/RLFA/TI-LFA,
RSVP-TE including FRR, LDP, T-LDP, mLDP, Segment Routing, PCEP, Seamless MPLS, CSPF, Routing
policy, Policy based routing , DHCP client/relay/Server
Ethernet: 802.1Q virtual LAN (VLAN), 802.1ad Provider Bridge, IEEE 802.3ad Link Aggregation Control Protocol,
BVI – Bridged Virtual Interface, QinQ, G.8032 Ethernet Ring Protection Switching, BUM storm protection,
Jumbo Frame up to 9600 bytes
Layer-2/Layer-3 Virtual Private Networking: L3 MPLS VPNs, 6VPE/6PE, Inter-autonomous-system MPLS VPN (options A, B, C), VPWS for E-Line
Services, VPLS/H-VPLS for E-LAN Services, Pseudowire redundancy, MEF CE1.0/2.0 Compliant, Ethernet
VPN for E-Line & E-LAN Services
Multicast Protocols: IPv4/IPv6 multicast, PIM-SM/SSM, IGMP v1/v2/v3, MLDv2, MVPN, IGMP snooping*
Timing and Synchronization: IEEE 1588-2008 Precision Time Protocol, ITU-T Profiles for Frequency (G.8265.1 SOOC) and Time/Phase
(G.8275.1 T-BC/GM & G.8275.2 T-BC/GM), NTP, SyncE with ESMC, Enhanced SyncE, Stratum 3E clock, L1
Assist holdover, PTP quality measurement and monitoring
Operation and Maintenance: IEEE 802.1ag Connectivity Fault Management, ITU-T Y.1731 (DM, SLM and Throughput), 802.3ah
Ethernet OAM, Microwave Bandwidth Notification, MACSWAP, MPLS Ping /Traceroute, BFD IPv4 & IPv6
Single Hop, BFD IPv4 & IPv6 Multi Hop, Micro-BFD, Seamless BFD, TWAMP Reflector, TWAMP Initiator,
Port Mirroring, LLDP, IPFIX (IP Flow Information Export)*
Security: Secure boot, Vendor credential, Secured storage, Access control lists, RADIUS, TACACS+, LDAP, SSH
v1/v2, Reverse-path forwarding, IPSec, IKEv2, CMPv2, CRL, TLS, 802.1x port-based network access
control
Quality of Service: Strict-queuing, weighted fair queuing, priority-weighted fair queuing, Multi-tier Hierarchical QoS, Deep
packet buffers, RED/Weighted RED, Ingress policing, Egress shaping, 802.1p, MPLS EXP bits,
Differentiated Services
Network Management: Management by Ericsson Network Manager (ENM), Management by Ericsson OSS-RC, Management by
Ericsson ServiceOn Element Manager (SoEM), CLI, SNMP v2c/v3, NETCONF, YANG models, Syslog,
RMON, PM Job, Zero Touch Provisioning, Telemetry Streaming

Standards and specifications


Safety: LVD Directive 2014/35/EU, IEC/EN 60950-1, IEC/EN 62368-1, CFR 29 Part 1910, UL/CSA 62368-1
EMC: EMC Directive 2014/30/EU, EN 300386, CISPR 32, EN 55032, CISPR 24, EN 55024, EN 50121-1, EN
50121-4, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 300132-2, EN 300132-1, ES 201468, DTAG 1
TR 9; CFR 47 Part 15, ICES-003; VCCI V-3
ENV: RoHS Directive 2011/65/EU, WEEE Directive 2012/19/EU, EN 300 019-2-1, EN 300 019-2-2, EN 300
019-2-3, EN 300 753, ECE-C1.1
NEBS: GR-1089-CORE, GR-63-CORE, SR-3580 (NEBS Level 3), ATT-TP-76200, VZ.TPR.9203, VZ.TPR.9305

*Future release

1/287 01-FGC 101 3443 Uen Rev M


The content of this document is subject to revision without notice.
© Ericsson AB 2019 Ericsson shall have no liability for any error or damage of any kind
www.ericsson.com resulting from the use of this document.

You might also like