3 563

RAA31 RAA31.16 RAA31.26

Room Thermostats RAA31..

Adjustable room thermostat for heating only or cooling only systems

· Room thermostat with manual ON/OFF switch

· Two-position control
· Switching voltage AC 24…250 V

Use

The RAA31.. room thermostat is used in heating only or cooling only systems to main-
tain the selected room temperature.

Typical use:
· Residential buildings
· Light industrial buildings

In conjunction with
- zone valves, thermal valves
- gas or oil burners
- fans
- pumps

CE1N3563en
2015-01-13 Building Technologies
Functions

The front of the unit carries an ON/OFF switch.

OFF In the OFF position, the input voltage is physically separated from the output voltage.
ON The RAA31.. room thermostat has separate ouputs for heating only and cooling only. If
the room temperature falls below the selected setpoint, the heating contact will close. If
the room temperature exceeds the selected setpoint, the cooling contact will close.
Function diagrams Heating Cooling
Y1 Y2 T Room temperature
SD Switching differential
ON ON W Room temperature set-
point
Y1 Output signal "Heating"
W W
Y2 Output signal "Cooling"

Type summary

Functionality Order number (ASN)

Thermostat for heating or cooling application with RAA31
ON/OFF switch
Operating voltage AC 24...250 V
Thermostat for heating or cooling application with RAA31.16
ON/OFF switch and operation mode indication (LED)
Operating voltage AC 230 V + /-10 %.
Thermostat for heating or cooling application with RAA31.26
ON/OFF switch and operation mode indication (LED) and
independent ON/OFF switch
Operating voltage AC 230 V +/-10 %.

Equipment combinations

Type of unit Type reference Data sheet*)

Motoric on/off actuator SFA21... 4863
Electric actuator (for small valves) SFP21… 4865
Thermal actuator (for radiator valve) STA21... 4877
Thermal actuator (for small valve 2.5 mm) STP21... 4878
*)
The documents can be downloaded from http://siemens.com/bt/download.

Accessories

Description Type reference

Adapter plate 120 x 120 mm for 4“ x 4“ conduit boxes ARG70
Adapter plate 96 x 120 mm for 2“ x 4“ conduit boxes ARG70.1
Adapter plate for surface wiring 112 x 130 mm ARG70.2

Technical desig

Key features of the RAA31.. room thermostat:

· Two-position control
· Manual ON/OFF switch
· Gas-filled diaphragm

2/6

Siemens Room Thermostats RAA31... CE1N3563en

Building Technologies 2015-01-13
Adjustments

The required temperature is selected by a setpoint adjuster on the front of the thermo-
stat.
The setpoint setting range can be mechanically limited by means of setpoint limiter
under the cover.

Notes

Mounting, installation The room thermostat should be located where the air temperature can be sensed as
and commissioning accurately as possible, without getting adversely affected by direct solar radiation or
other heat or refrigeration sources.
Mounting height is about 1.5 m above the floor.

The unit can be fitted to most commercially available recessed conduit boxes or directly
on the wall.
Only authorised personnel may open the unit to perform service.
Warning:
The unit must be isolated from the mains supply before opening.
AC 24…250 V!
When installing the unit, fix the base plate first then hook on the thermostat body and
make the electrical connections. Then fit the cover and secure it (also refer to separate
mounting instructions).
The thermostat must be mounted on a flat wall.
The local electrical regulations must be complied with.
If there are thermostatic radiator valves in the reference room, set them to their fully
open position.

Warning!
No internal line protection for supply lines to external consumers (Y1, Y2)
Risk of fire and injury due to short-circuits!
· Adapt the line diameters as per local regulations to the rated value of the installed
overcurrent protection device.

Maintenance The room thermostat is maintenance-free.

Mechanical design The diaphragm is filled with environmentally friendly gas.

The thermostat housing is made of plastic.

Ordering

Type (ASN) Part number (SSN) Description

RAA31 S55770-T221 Room thermostat RAA31
RAA31.16 S55770-T222 Room thermostat RAA31.16
RAA31.26 S55770-T223 Room thermostat RAA31.26

3/6

Siemens Room Thermostats RAA31... CE1N3563en

Building Technologies 2015-01-13
Disposal

The devices are considered electronics devices for disposal in term of European
Directive 2012/19/EU and may not be disposed of as domestic waste.
· Dispose of the device via the channels provided for this purpose
· Comply with all local and currently applicable laws and regulations.

Technical Data
Switching capacity
Power Voltage
· RAA31... AC 24...250 V / 50 or 60 Hz
· RAA31.16 and 31.26 AC 230 V +/-10 %
Power consumption of each LED 0.5 VA (Only RAA31.16 and RAA31.26)
Current 0.2…6 (2.5) A
Frequency 50 or 60 Hz
No internal fuse
External preliminary protection with max. C 10 A circuit breaker in the supply line required under all
circumstances
2 2
Screw terminals for 2 x 1.5 mm (min. 0.5 mm )
Operational data Switching differential SD £1 K
Setpoint setting range 8…30 °C
Environmental conditions Operation to IEC 60721-3-3
Climatic conditions Class 3K5
Temperature 0…50 °C
Humidity <95 % r.h.
Pollution degree Normal, to EN 60730-1
Transport / storage to IEC 60721-3-2
Climatic conditions Class 2K3/1K3
Temperature -20…50 °C
Humidity <95 % r.h.
Mechanical conditions Class 2M2
*)
Industry standards EU Conformity (CE) CE1T3561xx
*)
RCM Conformity CE1T3561en_C1
Safety standard II to EN 60730-1
Degree of protection of housing IP30 to EN 60529
*)
Environmental The product environmental declarations CE1E3015, CE1E3561 contain data on envi-
ronmentally compatible product design and assessments (RoHS compliance, materials
compatibility composition, packaging, environmental benefit, disposal).
Mechanical design Weight 0.14 kg
Colour of top cover white, NCS 50502-G (RAL 9003)

*)
The documents can be downloaded from http://siemens.com/bt/download.

4/6

Siemens Room Thermostats RAA31... CE1N3563en

Building Technologies 2015-01-13
Connection diagrams

D1 Zone valve or thermal valve

for heating
D2 Zone valve or thermal valve
S S for cooling
T T L Switching voltage
AC 24…250 V (RAA31 only)
AC 230 V
(RAA31.16 / 26/ only)
N1 Room thermostat
S ON/OFF switch

3210A03

3210A04
Y1 Control output "Heating",
AC 24…250 V (RAA31 only)
RAA31 – Heating mode RAA31 – Cooling mode AC 230 V
(RAA31.16 / 26 only)
Y2 Control output "Cooling",
AC 24…250 V (RAA31 only)
AC 230 V
(RAA31.16 / 26 only)
N Neutral
T Thermostat element
(gas-filled diaphragm)

L4, L5 Input AC 230 V

L50 Output
SA Auxiliary switch

RAA31.16 – Heating mode RAA31.26 – Heating mode

5/6

Siemens Room Thermostats RAA31... CE1N3563en

Building Technologies 2015-01-13
Dimensions

RAA31 and Room thermostat Base plate

RAA31.16

RAA31.26 Room thermostat Base plate

Remarks

Heating:
Because of the unavoidable self heating effects of the electrical current, any loads of
more than 3 Amperes connected to the unit can influence the control behavior and
temperature accuracy in a negative way.

Cooling:
Because of the unavoidable self heating effects of the electrical current, any loads of
more than 1 Amperes connected to the unit can influence the control behavior and
temperature accuracy in a negative way.

6/6 ã Siemens Switzerland Ltd, 2011 Subject to change

Siemens Room Thermostats RAA31... CE1N3563en

Building Technologies 2015-01-13