Scribd
Upload
110 views2 pages

Steam Turbine Oil System Operation Shutdown Diagram

This document outlines the shutdown procedure for a steam turbine and its oil system. It provides 8 steps for shutting down including: 1) Allowing the turbine to cool before stopping the turning gear, 2) Starting the shutdown once auxiliary pumps and criteria are met, 3) Using a manual or automatic shutdown, 4) Closing the turning gear valve and switching controls off, 5) Waiting for the shaft to fully stop, 6) Switching off auxiliary pumps and controls, 7) Waiting for jacking pumps to reduce expansion, 8) Switching off jacking pumps and controls. Precise temperatures, pumps, valves and controls are specified at each step.

Uploaded by

parthibanemails5779
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
110 views2 pages

Steam Turbine Oil System Operation Shutdown Diagram

This document outlines the shutdown procedure for a steam turbine and its oil system. It provides 8 steps for shutting down including: 1) Allowing the turbine to cool before stopping the turning gear, 2) Starting the shutdown once auxiliary pumps and criteria are met, 3) Using a manual or automatic shutdown, 4) Closing the turning gear valve and switching controls off, 5) Waiting for the shaft to fully stop, 6) Switching off auxiliary pumps and controls, 7) Waiting for jacking pumps to reduce expansion, 8) Switching off jacking pumps and controls. Precise temperatures, pumps, valves and controls are specified at each step.

Uploaded by

parthibanemails5779
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Steam Turbine Oil System

Operation Shutdown Diagram

(01) + CRITERIA FOR STANDSTILL CHECK


+ CASING TEMPERATURE < 100 °C MAA50 CT053A
BEFORE THE TURBINE GEAR IS STOPPED, SHAFTS AND MAA50 CT054A
AND CASING MUST COQL DOWN TO 100 °C TO
PREVENT SHAFT DISTORTION DURING STANDSTILL
PERIOD FOLLOWING TURNING GEAR OPERATION.
THE TURNING GEAR MUST BE STOPPED IF ABOVE
TEMPERATURES ARE REACHED, EXCEPT IN CASES
WHERE EXTENDED TURNING GEAR OPERATION IS
REQUIRED e.g. IF THE TURBINE IS TO BE STARTED
IN SHORT TIME.

(02) + CRITERIA FOR BEGIN OF SHUT DOWN CHECK


IF THE FOLLOWING CRITERIA ARE FULFILLED
THE SYSTEM WILL BE SHUT DOWN FROM
TURNING GEAR OPERATION.
+ SUBLOOP CONTROL TURNING GEAR ON
AND
+ SUBLOOP CONTROL OF AUXILIARY OIL PUMPS ON
AND
+ SUBLOOP CONTROL OF EMERGENCY OIL PUMPS ON
AND
+ AVXILIARY OIL PUMP ON MAV22 A Pool
OR MAV23 A Pool
+ WAITING TIME FOR COOLING DOWN (K4) EXPIRED
+ SUBLOOP CONTROL OF JACKING OIL PUMPS ON
AND
+ JACKING OIL PUMP ON MAV31 A Pool
OR MAV32 A Pool

(03) + FGA (OIL SUPPLY STANDSTILL)


FOR OPERATION OF PUSH BUTTONS REFER
TO MANUAL FOR FGA.
OR
+ TURNING GEAR MANUALLY OPERATED SHUTDOWN

(04) + SUBLOOP CONTROL TURNING GEAR SWITCH OFF


AND
+ TURNING GEAR OIL VALVE CLOSE MAV51 AAOO1
+ SUBLOOP CONTROL TURNING GEAR OFF
AND
+ TURNING GEAR OIL VALVE CLOSED MAV51 AAOO1
OR WITH FGA (OIL SUPPLY)
(04/S) *+ SUBLOOP CONTROL TURNING GEAR OFF MAV51AAO12

(05) + WAIT
THE WAITING TIME IS EXPIRED WHEN THE
SHAFT COMES TO A COMPLETE STOP.
+ SHAFT STAND STILL

BHEL Hardwar 6.2-0340-01/1


06) + SUBLOOP CONTROL OF AUXILIARY OIL PUMPS SWITCH OFF
AND
+ SUBLOOP CONTROL OF EMERGENCY OIL PUMPS SWITCH OFF
AND
+ AUXILIARY OIL PUMP SWITCH OFF MAV22 A Pool
OR MAV23 A Pool
+ SUBLOOP CONTROL OF AUXILIARY OIL PUMPS OFF
AND
+ SUBLOOP CONTROL OF EMERGENCY OIL PUMPS OFF
AND
+ AUXILIARY OIL. PUMP OFF MAV22 A Pool
AND MAV23 A Pool
AND
+ EMERGENCY OIL PUMPS OFF MAV24 A Pool
OR WITH FGA (OIL SUPPLY)
(06/S) *+ SUBLOOP CONTROL OF AUXILIARY OIL PUMPS OFF
AND
*+ SUBLOOP CONTROL OF EMERGENCY OIL PUMPS OFF
AND
*+ AUXILIARY OIL PUMP OFF MAV22 A Pool
AND MAV23 A Pool
AND
*+ EMERCJENCY OIL PUMP OFF MAV24 A Pool

(07) + WAIT
WAIT FOR SHUTDOWN OF JACKING OIL PUMP UNTIL
THE RELATIVE EXPANSIONS ARE REDUCED AND NO
FURTHER MAJOR AXIAL SHIFTING OF THE JOURNALS
IN THE BEARINGS IS EXPECTED.

(08) + SUBLOOP CONTROL OF JACKING OIL PUMP SWITCH OFF


AND
+ JACKING OIL PUMP SWITCH OFF MAV31 A Pool
OR MAV32 A Pool
+ SUBLOOP CONTROL OF JACKING OIL PUMP OFF
AND
+ JACKING OIL PUMP OFF MAV31 A Pool
OR WITH FGA (OIL SUPPLY) AND MAV32 A Pool
(08/S) *+ SUBLOOP CONTROL OF JACKING OIL PUMP OFF
AND
*+ JACKING OIL PUMP OFF MAV31 A Pool
AND MAV32 A Pool

BHEL, Hardwar 6.2-0340-01/2

You might also like