DC/DC Converter

B_S-1WR2 & B_D-1WR2 series

1W, Fixed input voltage, isolated & unregulated FEATURES

single output
z Continuous short-circuit protection
z Operating temperature range: -40℃ to +105℃
z High efficiency up to 80%
z Miniature SIP/DIP package
z Isolation voltage: 1.5K VDC
z No external component required
z International standard pin-out

Patent Protection RoHS

B_S-1WR2 & B-D-1WR2 series are specially designed for applications where an isolated voltage is required in a distributed power supply
system. They are suitable for
1. Where the voltage of the input power supply is stable (voltage variation: ±10%Vin);
2. Where isolation between input and output is necessary (isolation voltage ≤1500VDC);
3. Where the output voltage regulation and the ripple & noise of the output voltage is not strictly required;
4. Typical application: digit circuit condition; normal low-frequency artificial circuit condition; relay drive circuit and data switching circuit
condition, etc.

Selection Guide
Input Voltage (VDC) Output Efficiency Max.
Certification Part No. Nominal Output Voltage Output Current (%,Min./Typ.) Capacitive
(Range) (mA)(Max./Min.) @ Full Load Load(μF)
(VDC)
-- B0303S-1WR2 3.3 303/30 68/72
B0305S-1WR2 5 200/20 72/76
UL/CE 3.3
B0312S-1WR2 12 84/9 76/80
(2.97-3.63)
B0303D-1WR2 3.3 303/30 68/72
-- B0305D-1WR2 5 200/20 72/76
B0503S-1WR2 3.3 303/30 68/72
B0505S-1WR2 5 200/20 76/80
B0509S-1WR2 9 111/12 76/80
UL/CE B0512S-1WR2 12 84/9 76/80
B0515S-1WR2 15 67/7 76/80
B0524S-1WR2 5 24 42/4 76/80
-- B0503D-1WR2 (4.5-5.5) 3.3 303/30 68/72
B0505D-1WR2 5 200/20 76/80
B0509D-1WR2 9 111/12 76/80
220
UL/CE B0512D-1WR2 12 84/9 76/80
B0515D-1WR2 15 67/7 76/80
B0524D-1WR2 24 42/4 76/80
-- B1203S-1WR2 3.3 303/30 68/72
B1205S-1WR2 5 200/20 76/80
B1209S-1WR2 9 111/12 76/80
UL/CE
B1212S-1WR2 12 83/9 76/80
B1215S-1WR2 15 67/7 76/80
12
B1224S-1WR2 24 42/4 76/80
-- (10.8-13.2)
B1203D-1WR2 3.3 303/30 68/72
B1205D-1WR2 5 200/20 76/80
B1209D-1WR2 9 111/12 76/80
UL/CE
B1212D-1WR2 12 84/9 76/80
B1215D-1WR2 15 67/7 76/80

2015.04.17-A/3 Page 1 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
B_S-1WR2 & B_D-1WR2 series

B1505S-1WR2 5 200/20 76/80

B1512S-1WR2 12 84/9 76/80
B1515S-1WR2 15 15 67/7 76/80
-- B1505D-1WR2 (13.5-16.5) 5 200/20 76/80
B1509D-1WR2 9 111/12 76/80
B1515D-1WR2 15 200/20 76/80
B2403S-1WR2 3.3 303/30 68/72
B2405S-1WR2 5 200/20 76/80
B2409S-1WR2 9 111/12 76/80
UL/CE B2412S-1WR2 12 84/9 76/80
B2415S-1WR2 15 67/7 76/80
B2424S-1WR2 24 24 42/4 76/80
-- B2403D-1WR2 (21.6-26.4) 3.3 303/30 68/72
B2405D-1WR2 5 200/20 76/80
B2409D-1WR2 9 111/12 76/80
UL/CE B2412D-1WR2 12 84/9 76/80
B2415D-1WR2 15 67/7 76/80
B2424D-1WR2 24 42/4 76/80

Input Specifications
Item Operating Conditions Min. Typ. Max. Unit
3.3V input -- 404/30 --/70
5V input -- 277/20 --/60
Input Current
12V input -- 115/15 --/50 mA
(full load / no-load)
15V input -- 83/10 --/35
24V input -- 57/17 --/30
Reflected Ripple Current -- 15 -- mA
3.3 input -0.7 -- 5
5V input -0.7 -- 9
Surge Voltage (1sec. max.) 12V input -0.7 -- 18 VDC
15V input -0.7 -- 21
24V input -0.7 -- 30
Input Filter Filter capacitor
Hot Plug Unavailable

Output Specifications
Item Operating Conditions Min. Typ. Max. Unit
Output Voltage Accuracy See tolerance envelope graph (Fig. 1)
Input voltage 3.3VDC output -- -- ±1.5
Line Regulation --
change: ±1% Other output -- -- ±1.2
3.3VDC output -- 18 --
5VDC output -- 12 --
9VDC output -- 8 --
Load Regulation 10%-100% load %
12VDC output -- 7 --
15VDC output -- 6 --
24VDC output -- 5 --
Ripple & Noise* 20MHz bandwidth -- 60 150 mVp-p
Temperature Coefficient Full load -- -- ±0.03 %/℃
B24xxS-1WR2/ B24xxD-1WR2/B0524S-1WR2/ B0524D-1WR2 -- -- 1 s
Short Circuit Protection**
Others Continuous, self-recovery
Note: * Ripple and noise are measured by “parallel cable” method, please see DC-DC Converter Application Notes for specific operation;
**Supply voltage must be discontinued at the end of short circuit duration for B24xxS-1WR2/ B24xxD-1WR2 series, and B0524S-1WR2/B0524D-1WR2 models.

2015.04.17-A/3 Page 2 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
B_S-1WR2 & B_D-1WR2 series

General Specifications
Item Operating Conditions Min. Typ. Max. Unit
Input-output, with the test time of 1 minute and the leak
Isolation Voltage 1500 -- -- VDC
current lower than 1mA
Isolation Resistance Input-output, isolation voltage 500VDC 1000 -- -- MΩ
Isolation Capacitance Input-output, 100KHz/0.1V -- 20 -- pF
Operating Temperature Derating when operating temperature up to 85℃, (see Fig. 2) -40 -- 105
Storage Temperature -55 -- 125
℃
Casing Temperature Rise Ta=25℃, nominal input, full load output -- 25 --
Pin Welding Resistance Temperature Welding spot is 1.5mm away from the casing, 10 seconds -- -- 300
Storage Humidity Non-condensing -- -- 95 %RH
Switching Frequency Full load, nominal input voltage -- 100 -- KHz
MTBF MIL-HDFK-217F@25℃ 3500 -- -- K hours

Physical Specifications
Casing Material Black flame-retardant heat-proof epoxy resin (UL94-V0)
B_S-1WR2 series 11.60*6.00*10.16 mm
Dimensions
B_D-1WR2 series 12.70*10.16*8.20 mm
B_S-1WR2 series 1.3g(Typ.)
Weight
B_D-1WR2 series 1.8g(Typ.)
Cooling Method Free convection

EMC Specifications
CE CISPR22/EN55022 CLASS B (see Fig. 4 for recommended circuit)
EMI
RE CISPR22/EN55022 CLASS B (see Fig. 4 for recommended circuit)
EMS ESD IEC/EN61000-4-2 Contact ±8KV perf. Criteria B

Product Characteristic Curve

3.3VDC output Other output
Tolerance Envelope Cur ve Tolerance Envelope Cur ve
Output Voltage Accuracy (%)

+10% +15%
Output Voltage Accuracy (%)

+5% Max . +10%

Max .
+1.0% +5%
0
Ty p . Ty p . +2.5%
-5% 0
-7.5% M in. -2.5%
-10% M in. -5%
-7.5%
-15% -15% -10%

10% 20% 40% 60% 80% 100% 10% 20% 40% 60% 80% 100%
Output Current Percentage(%) Output Current Perc ent(%)
(Nominal Input Voltage) (Nominal Input Voltage)
Fig. 1
Temperature Derating Curve
Output Power Percent(%)

120
100

80
60
Safe Operating Area
40
20

0
-40 0 40 85 105 120
Ambient Temp.(℃)
Fig. 2

2015.04.17-A/3 Page 3 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
B_S-1WR2 & B_D-1WR2 series

Efficiency Vs Input Voltage (Full Load) Efficiency Vs Output Load(Vin=5V)

100 100
95 90
90 80 B0505S-1WR2
Efficiency(%)

85 70

Efficiency(%)
B0505S-1WR2
80 60
75 50
70 40
65 30
60 20
55 10
50 0
4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 10 20 30 40 50 60 70 80 90 100
Input Voltage(V) Output Current Percentage(%)

Efficiency Vs Input Voltage (Full Load) Efficiency Vs Output Load(Vin=24V)

100 100
95 90
90 80 B2415S-1WR2
Efficiency(%)

85 70

Efficiency(%)
B2415S-1WR2
80 60
75 50
70 40
65 30
60 20
55 10
50 0
22 22.5 23 23.5 24 24.5 25 25.5 26 26.4 10 20 30 40 50 60 70 80 90 100
Input Voltage(V) Output Current Percentage(%)

Design Reference
1. Typical application circuit
If it is required to further reduce input and output ripple, a filter capacitor may be connected to the input and output terminals, see Fig.3.
Moreover, choosing a suitable filter capacitor is very important, start-up problems may be caused if the capacitance is too large. Under the
condition of safe and reliable operation, the recommended capacitive load values are shown in Table 1.

Recommended capacitive load value table (Table 1)

Vin(VDC) Cin(μF) Vo (VDC) Cout(μF)

+Vo 3.3/5 4.7 3.3/5 10

Vin
12 2.2 9 4.7
Cin DC DC Cout
GND 15 2.2 12 2.2
0V
Fig.3 24 1 15 1
-- -- 24 0.47

2. EMC solution-recommended circuit

LDM
Vin Vin +Vo Input voltage (VDC) 3.3/5/12/15/24
C1 4.7μF /50V
C1 DC/DC C2 LOAD
EMI C2 Refer to the Cout in Fig.3
LDM 6.8μH
GND GND 0V

Fig. 4
3. Output load requirements
When using, the minimum load of the module output should not be less than 10% of the nominal load. In order to meet the performance
parameters of this datasheet, please connect a 10% dummy load in parallel at the output end, the dummy load is generally a resistor,
Please note that the resistor needs to be used in derating.

4. For more information please find DC-DC converter application notes on www.mornsun-power.com

2015.04.17-A/3 Page 4 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
B_S-1WR2 & B_D-1WR2 series

Dimensions and Recommended Layout B_S-1WR2

THIRDANGLEPROJECTION

0.50[0.020]

10.16[0.400]
FrontView
1 2 3 4

4.10[0.161] ∅1.00[∅0.039]

Note：Grid2.54*2.54mm
7.62[0.300]

2.54[0.100] 0.50[0.020]
0.90[0.035]
Pin-Out
Pin Function
1 2 3 4
0.30[0.012] 6.00[0.236] 1 GND
BottomView
2 Vin
3 0V
11.60[0.457]
4 +Vo
Note:
Unit:mm[inch]
Pinsectiontolerances:±0.10[±0.004]
1100000301-B0
Generaltolerances:±0.25[±0.010]

Dimensions and Recommended Layout B_D-1WR2

THIRDANGLEPROJECTION

∅1.00[∅0.039]
7.70[0.303]
8.20[0.323]

4.10[0.161]

Frontview
7 5

1 4
0.50[0.020]
0.30[0.012]

12.70[0.500] Note:Grid2.54*2.54mm
5.10[0.201]

7.62[0.300]

1 4
Pin-Out
10.16[0.400]
7.62[0.300]

Bottomview Pin Function

1 GND
7 5 4 Vin
∅1.00[∅0.039] 5.08[0.200] 5 +Vo
7 0V
Note:
Unit:mm[inch]
Pinsectiontolerances:±0.10[±0.004]
Generaltolerances:±0.25[±0.010]
1100000501-B0

2015.04.17-A/3 Page 5 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
B_S-1WR2 & B_D-1WR2 series

Notes:
1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing
bag number: 58210003(B_S-1WR2), 58200011(B_D-1WR2)；
2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all
parameters in the datasheet;
3. The maximum capacitive load offered were tested at nominal input voltage and full load;
4. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25 ℃ , humidity<75% with nominal
input voltage and rated output load;
5. All index testing methods in this datasheet are based on our Company’s corporate standards;
6. The performance parameters of the product models listed in this manual are as above, but some parameters of non-standard model
products may exceed the requirements mentioned above. Please contact our technicians directly for specific information;
7. We can provide product customization service;
8. Specifications are subject to change without prior notice.

MORNSUN Guangzhou Science & Technology Co., Ltd.

Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China
Tel: 86-20-38601850-8801 Fax: 86-20-38601272 E-mail: [email protected]

2015.04.17-A/3 Page 6 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation