Spring supports

Type 29
ØD

Spring supports

F
type 29 C2 19 to 29 93 18
Standard design,


delivery from stock.

E
Ø L1

H
ØA

S
d6
C
 
B
 

weight
typ e  ØA B
  C
  d6 E F H ØD S [kg]
Load plate with integrated 29 C2 19 80 105 75 10 270 36 210 80 6 2.6
slide plate. 29 D1 19 90 125 95 12 195 36 145 80 8 3.2
29 D2 19 90 125 95 12 305 36 245 80 8 4.3
When using slide plates the 29 D3 19 90 125 95 12 550 36 470 80 8 6.6
sliding surfaces of the counter 29 11 18 90 125 95 12 195 36 145 80 8 3.4
component used should be 29 12 18 90 125 95 12 305 36 245 80 8 4.6
fitted with stainless steel 29 13 18 90 125 95 12 550 36 470 80 8 7.2
29 21 18 115 150 115 14 200 36 150 100 10 5.6
plating. This is indicated by
29 22 18 115 150 115 14 310 36 250 100 10 7.6
the suffix ‘SP’ on the type 29 23 18 115 150 115 14 540 36 460 100 10 11.1
designation (e.g. clamp 29 31 18 115 150 115 14 205 36 155 100 12 6.3
base type 49 22 25-SP). 29 32 18 115 150 115 14 310 36 250 100 12 8.4
29 33 18 115 150 115 14 550 36 470 100 12 13.0
29 41 18 155 190 140 18 240 48 180 120 12 11.9
type 29* with 29 42 18 155 190 140 18 360 48 290 120 12 16.0
slide plate 29 43 18 155 190 140 18 615 48 525 120 12 25.0
up to 180°C up to 350°C Ø L1 29 51 18 180 220 170 18 270 50 210 150 12 20.0
29 C2 17 29 C2 16 40 29 52 18 180 220 170 18 370 50 300 150 12 24.3
29 D. 17 29 D. 16 40 29 53 18 180 220 170 18 625 50 535 150 12 37.0
29 1. 17 29 1. 16 40 29 61 18 220 260 200 23 305 50 245 170 15 34.0
29 2. 17 29 2. 16 40
29 3. 17 29 3. 16 40 29 62 18 220 260 200 23 430 50 360 170 15 44.0
29 4. 17 29 4. 16 65 29 63 18 220 260 200 23 730 50 640 170 15 68.0
29 5. 17 29 5. 16 65 29 71 18 245 290 215 23 360 52 300 200 20 53.0
29 6. 17 29 6. 16 110 29 72 18 245 290 215 23 500 52 425 200 20 68.0
29 7. 17 29 7. 16 110 29 73 18 245 290 215 23 790 52 695 200 20 97.0
29 8. 17 29 8. 16 150 29 81 18 245 290 215 27 400 55 335 200 20 60.0
29 9. 17 29 9. 16 150
29 82 18 245 290 215 27 575 55 500 200 20 84.0
* friction values of the sliding 29 83 18 245 290 215 27 965 55 870 200 20 133.0
components, see table on p. 7.11. 29 91 18 275 340 255 33 440 60 370 240 25 91.0
29 92 18 275 340 255 33 625 60 545 240 25 118.0
For large horizontal load 29 93 18 275 340 255 33 1010 60 910 240 25 173.0
displacements, beside the
use of slide plates the  Dimension ‘E’ is independent of To bridge greater installation
the load adjustment; it changes on heights, adapted extensions
use of clamp bases with loading by the respective spring
E

twist-off restraints is also travel (see load table on p. 2.5). can be ordered.
recommended. Adjustment possibility + 30mm.
type 29 .9 15-E…
 Type 29 is supplied as standard
Order details: with a galvanized load plate with-
spring supports type 29 .. .. out a slide plate. If slide plates are load group
marking: … used, the ‘E’ dimension increases
set load: …kN by 2.5mm. Please note table
above. See also p. 7.12.
travel: …mm up/down
2.11