Scribd
Upload
213 views1 page

Form Qw-485 Suggested Format For Demonstration of Standard Welding Procedure Specifications (SWPS) (See Article V)

This document provides a suggested format for Standard Welding Procedure Specifications (SWPS) demonstrations. It includes sections for identifying the SWPS being demonstrated, the base metal and filler metal specifications, welding variables like process, position, and heat treatment, and test results from visual, bend, and radiographic examinations. Upon completion of a successful demonstration, the document is to be certified and signed by the welding supervisor and organization.

Uploaded by

Emma D
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
213 views1 page

Form Qw-485 Suggested Format For Demonstration of Standard Welding Procedure Specifications (SWPS) (See Article V)

This document provides a suggested format for Standard Welding Procedure Specifications (SWPS) demonstrations. It includes sections for identifying the SWPS being demonstrated, the base metal and filler metal specifications, welding variables like process, position, and heat treatment, and test results from visual, bend, and radiographic examinations. Upon completion of a successful demonstration, the document is to be certified and signed by the welding supervisor and organization.

Uploaded by

Emma D
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

FORM QW-485 SUGGESTED FORMAT FOR DEMONSTRATION OF STANDARD WELDING

PROCEDURE SPECIFICATIONS (SWPS)


(See Article V)

Identification of Standard Welding Procedure Specification Demonstrated


Date of Demonstration

Demonstration Welding Variables

Specification and type or grade or UNS Number of Base Metal(s)


to Specification and type or grade or UNS Number of Base Metal(s)
Base Metal P-Number to Base Metal P-Number Thickness

Welding Process(es) used


Plate Pipe (Enter Diameter of Pipe or Tube)
Groove Design (Single V, Double V, Single U, etc.)
Initial Cleaning Method
Backing (with or without)
Filler Metal Specification
Filler Metal or Electrode Classification
Filler Metal or Electrode Trade Name
Size of Consumable Electrode or Filler Metal
Tungsten Electrode Classification and Size for GTAW
Consumable Insert Class and Size for GTAW
Shielding Gas Composition and Flow Rate for GTAW or GMAW (FCAW)
Preheat Temperature
Position(s)
Progression (Uphill or Downhill)
Interpass Cleaning Method
Measured Maximum Interpass Temperature
Approximate Deposit Thickness for Each Process or Electrode Type
Current Type and Polarity (AC, DCEP, DCEN)
Postweld Heat Treatment Time and Temperature

Visual Examination of Completed Weld (QW-302.4) Date of Test

Bend Test (QW-302.1) Transverse Face and Root [QW-462.3(a)] Side (QW-462.2)

Type Result Type Result Type Result

Alternative Radiographic Examination Results (QW-302.2)


Specimens Evaluated By Title Company
Welding Supervised By Title Company
Welder's Name Stamp No.
We certify that the statements in this record are correct and that the weld described above was prepared, welded, and tested in accordance with
the requirements of Section IX of the ASME BOILER AND PRESSURE VESSEL CODE.

Organization

Signature Date Demonstration Number

(07/17)

You might also like