www.lfm-software.

com
LFM Software – Overview

Realise the true value of your laser scan data.

Outside the EPC environment, Owner Operators

are now also recognising the benefits of 3D laser
scanning. Laser scanning allows for compliance with
Health and Safety regulations; remote data capture is
possible and less working at height is required. Rapid
data collection has beneficial implications for the
amount of time and the number of people exposed to
potential hazards on site.
Register Connect CAD
Off site, Owner Operators continue to benefit from
3D laser scanning as the accurate, high resolution,
high quality data forms an integral part of their
asset management strategy and downstream work
processes. Laser scanning data allows for the
management of building data throughout its lifecycle.
It aids communication and collaboration between
architects, engineers, builders and owners.

For brownfield projects, the use of laser scanning

mitigates project risks and reduces costs by providing
the designer with a detailed, accurate ‘as-built’ Model Share
knowledge of the site.

By utilising this powerful technology, the user is

able to spend less time on site capturing as-built
information, dramatically reducing project timescales
and costs. Project timescales can also be reduced
during the design and construction phases by up
to 80% and 20% respectively. Overall schedule
compressions of 10% have been reported.

LFM Software – Key Features

The BubbleView™ provides a 3D, 360° rotation of a high
resolution intensity image. It is so powerful that the user has
the impression of being on site.

An unlimited number of registered scans can be stored in a

single database without compromise, using InfiniteCore™
technology. Acccess speed and quality of laser scan data
are unaffected.

LFM is hardware neutral: this has cost-saving implications

for LFM customers since only one software solution is
required even when there are multiple hardware systems.

LFM is CAD neutral: users can interface seamlessly with

their preferred CAD package and ‘clash check’ a proposed
design against existing conditions.
LFM Software – Business Benefits

Open system without

compatibility restrictions
LFM aims to be neutral at both ends:
neutral with respect to capture devices,
and neutral with respect to CAD and
modelling technologies.

Minimise the design risks

By providing the designer with a
detailed, as-built knowledge of the plant,
3D laser scanning mitigates project risks
and reduces design rework, thereby also
reducing costs. Get it right first time,
every time.

Relevant throughout the entire

plant lifecycle
LFM Software provides a complete
solution from registration of laser
scan data to as-built modelling. It is
considered by many as a
turn-key solution.

Reduces the amount of time

spent on site
The data captured by a 3D laser
scanner can be brought to the user’s
or designer’s desktop, and reviewed
at any time. By utilising this powerful
technology, the user is able to spend
less time on site capturing as-built
information, dramatically reducing
project timescales and costs.

Project collaboration
The LFM suite provides users with
comprehensive and easy-to-use tools,
to help project collaboration even when
multiple users are in different parts
of the world.
‘When correct work
flows are followed,
an 80% reduction in
the cost of capturing
as-built data can be
achieved with laser
scanning compared to
traditional means’
LFM Software – Product Portfolio

LFM Register™

LFM Register allows users to take raw data from individual 3D laser scanning
positions and bring them together into a fully coordinated framework faster and more
efficiently than any other package. LFM Register ensures accurate registration and,
therefore, accurate data; it moves the registration process off the critical project
path so that clients can quickly receive the full benefit from laser scan data. Various
features lead to higher levels of accuracy that, until now, have been associated with
traditional survey instruments. Moreover, users are provided with tools that will make
the process of searching for targets redundant, providing additional opportunities to
Register reduce project timescales and costs.

For instance, trials have shown that as much as 50% less control work may be
needed when using the bundle adjustment feature. Data registered in LFM can be
used with server packages from other laser scanning software vendors.

Key Features
Automatic registration process.

Traffic light metrics : immediately display the quality of registration.

Intercloud registration : register scans accurately without the use of targets.

Target prediction : locate one or two targets in the scan data, and LFM Register
automatically locates and fits the remaining ones.

LFM Server™

LFM Server allows users to access, and work with, preregistered 3D laser scan data
from any scanner vendor, clash detect as-built data against a proposed design, and
interface with CAD packages from AVEVA, Autodesk, Bentley, Intergraph or
VR Context.

With LFM Server, not only can users create and manage huge point cloud databases
from a large range of laser scanners, they can also link seamlessly to almost all of
the major CAD packages, using just one piece of software. Therefore, staff require
Connect CAD training in only one laser scanning software package, even where multiple CAD
deliverables are required.

LFM customers are also able to benefit from InfiniteCore technology. This technology
is unique, as it allows an unlimited number of registered laser scans to be stored in
a single database without compromise. Access speed is unaffected and individual
laser scans remain unaltered and intact. Every measured coordinate is stored ready
for rapid retrieval by the user.

Key Features
Import laser scan data from any scanner – export to any CAD package.

Load unlimited number of scans without compromise.

Clash detect proposed CAD design against as-built environment.

Navigate inside the BubbleView™ with the impression of being on-site, and
realise the true value of your laser scan data.
 LFM Modeller™

LFM Modeller allows users to produce 3D CAD models from as-built laser scan data
with only a few clicks, and export their intelligent 3D model creations into a wide
range of target CAD systems.

3D laser scanning offers considerable benefits to plant revamp and plant asset
management projects. However, the process of modelling 3D laser scan data can be
a time-consuming exercise, as fitting structural elements and modelling single pipe
runs can be a slow and error-prone process. LFM Modeller allows users to rapidly
Model create 3D models at an unsurpassed rate, without compromise.

3D models created in LFM Modeller are also exceptionally accurate and are relied
upon by leading Owner Operators to document their as-built conditions for safety,
inspection, maintenance and training purposes.

Key Features
Use BubbleView modelling to rapidly create intelligent, accurate 3D models.

A large range of standards and components are included in the standard library.

Smooth, intelligent export of as-built models into CAD package.

Extensive CAD manipulation and editing facilities allow the user to manipulate the
model until the modelling objectives have been achieved.

LFM NetView™

LFM NetView allows users to securely access remote 3D laser scan data. More than
an online viewing package, it provides tools that allow users to work collaboratively
with laser scan data over the Internet. LFM NetView is innovative in its approach to
sharing 3D laser scan data online, as it connects back to the master LFM Server
data set. This approach ensures that resolution of 3D laser scan data is maintained
when accessed remotely. Alternative Internet-based products involve the transfer of
laser data, inevitably necessitating a loss of resolution.

Share LFM NetView is intuitive and requires no formal training, while simultaneously
offering more functionality than simple web-enabled viewing packages. For instance,
annotations and measurements can be made at any time during a live session,
enabling full project collaboration.

LFM NetView is also available in a stand-alone mode. This enables users to operate
via the Internet and then switch easily to a file-based local or Intranet mode.

Key Features
Collaboration: extensive mark-up and measurement facilities.

Master-slave mode: live project reviews remotely, with colleagues or clients.

Review the full database in the intuitive BubbleView.

Stand-alone mode: operate without the Internet in a file-based local or

Intranet mode.
LFM Software – Applications

Whether you are a service provider looking for fast database generation; an
Owner Operator looking for an effective asset management tool; or a designer
working on the latest process plant for a major oil & gas multinational company,
the use of LFM Software brings business benefits to brownfield and as-built
documentation projects.

LFM can be used on a wide variety of applications, including:

Engineering Design verification Verify survey control

Tie-in location Work package planning

Clash detection Collaboration with engineering & vendors

Project collaboration Manage assets

Bid documents Decommissioning

Demolition definition Manage change

Verify against design model Quality control

Construction
Quality assurance Workshare

Registration Database generation

Modelling

Owner-Operator

Service Provider
 LFM Software – Comparison Matrix
Navigation

3D view
View

2D intensity view
Plan navigation

LFM BubbleView
Objects in BubbleView
BubbleView
Technology

Hotspots in BubbleView
Clash in BubbleView
Inter-BubbleView measurements
Neighbouring scan site map
Annotations

InfiniteCore technology
3D point measurement
Tie-in extraction/visualisation
Scan registration vs survey
Scan to scan registration
Target prediction
Orthophoto generation
Core Features
LFM Software

3D model generation
Robust fitting algorithm
CAD standard library
Comparison with CAD models
Cell library models
Database generation
Intelligent piping & structural export
Clash reporting
Internet sharing
Automatic target recognition

Autodesk - AutoCAD
Autodesk - AutoPlant 3D
Autodesk - Navisworks
Autodesk - Revit
CAD Systems

AVEVA - Plant / Marine

Connectivity

AVEVA - Review
Bentley - AutoPLANT
Bentley - Microstation
Intergraph - CADWorx
Intergraph - PDS
Intergraph - SmartPlant 3D
Intergraph - SmartPlant Review
VR Context - Walkinside

Intelligent Model Export

.pcf and .pxf
LFM Scan Gateway

LFM Scan Gateway allows users to import

any 3D laser scan data format into the
LFM suite. Scan data imported into
LFM Scan Gateway is relevant throughout
the entire LFM Software portofolio.

This includes .ptx, .zfs, .zfc, .fls, .ptz, .3dd, .rdb

and .rxp
All product names mentioned are the trademarks of their respective holders.
LFM Software Limited, an AVEVA Group company

5 Avocado Court, Commerce Way

Trafford Park, Manchester
M17 1HW, UK

Tel +44 (0) 161 869 0450

Fax +44 (0) 161 869 0451

www.lfm-software.com

LFM Software Limited believes the information in this publication is correct as of its publication date. As part of continued product development, such information is subject
to change without prior notice and is related to the current software release. LFM Software Limited is not responsible for any inadvertent errors. All product names mentioned
are the trademarks of their respective holders.

Copyright 2012 AVEVA Solutions Limited and its subsidiaries. All rights reserved. LFM/PFL/12