Electrical & Electronics Engineering: A Mini Project On "A Detailed Study On Ktps - Vii Stage Over View"

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 8

A

MINI PROJECT ON

“A DETAILED STUDY ON KTPS -VII STAGE


OVER VIEW”

Submitted in partial fulfillment of the requirement for the award of degree

Bachelor of Technology

In

ELECTRICAL & ELECTRONICS ENGINEERING

Submitted by

K.DHANUNJAY - 18QP5A0211

R.SAI VIGNESH - 18QP5A0224

SYED LIYAQATH - 18QP5A0230

V.AVINASH - 18QP5A0236

Under The Esteemed Guidance of

Mr. G. RAKESH

AE/MRT KTPS/VII STAGE,PALONCHA

DEPARTMENT OF ELECTRICAL& ELECTRONICS ENGINEERING

KHAMMAM INSTITUE OF TECHNOLOGY AND SCINCES[KITS],KMM.

(Approved by AICTE,Govt of T.S & Affiliated to JNTUH University ,Hyderbad).

(2020-2021)
DECLARATION
We here by certify that the Project Report entitled “ A DETAILED STUDY
ON KTPS -VII STAGE OVER VIEW” under the guidance of Mr.
K.PRAVEEN KUMAR is submitted in partial fulfillment of the requirements
for the Award of the Degree of BACHELOR OF TECHNOLOGY in
ELECTRICAL & ELECTRONICS ENGINEERING. This is record of
bonafide work carried by us and the results embodied in this Project Report
have not been submitted to any other University or Institute for Award of any
other Degree or Diploma.

K. DHANUNJAY 18QP5A0211
R. SAI VIGNESH 18QP5A0224
SYED LIYAQATH 18QP5A0230
V. AVINASH 18QP5A0236

Date: Department of Electrical and Electronics Enigineering


Khammam Institute of Science & Technology
Khammam
ACKNOWLEDGEMENT

The development of this project through it was an arduous task, has been
successfully completed .We are pleased to express our thanks to these people,
whose suggestions, comments and critics greatly encouraged us in betterment of
this project.

We also thank Mr. G. RAKESH, AE/MRT/KTPS-VII STAGE and


Mr.K.MALLIKARJUNA RAO, DE/EM/KTPS-VIISTAGE who helped as
for the completion of this project.

We are greatful to Mr. G. RAKESH, AE/MRT/KTPS-VII STAGE


whose guided us in every aspect of the project and provided valuable material
without their motivation and inspiration. It would be impossible for us to
complete project. They helped us a lot to understand the theoretical concepts of
our subjects through practical point of view.

We also thank our each and every faculty member of the Electrical and
Electronics Engineering Department, KHAMMAM INSTITUTES OF
TECHNOLOGY AND SCIENCES, Ponnekal, Khammam for their able advice
and constant guidance , which lead me to project.

We also like to thank our Principal Prof. Pannala Krishna Murthy


for giving me the opportunity to do my project in this esteemed organisation.

It gives great delight to express our deep sense of gratitude to our


Head of the department Mr. CH. KRISHNA PRASAD.

Project by:

K. Dhanunjay.

R. Sai Vignesh.

Syed Liyaqath.

V. Avinash.
CONTENTS
CHAPTER-1

BRIEF HISTORY OF KOTHAGUDEM

THERMAL POWER STATION


• 1.1. ABOUT KTPS
• 1.2. GENERAL LAYOUT & BASIC IDEA
• 1.3. BASIC REQUIREMENTS

CHAPTER-2

TRANSFORMERS

 2.1. INTRODUCTION TO TRANSFORMER

 2.2. WORKING PRINCIPLE OF A TRANSFORMER

 2.3. DIFFERENT PARTS OF TRANSFORMER


• 2.3.1. CORE
• 2.3.2. INSULATING OIL
• 2.3.3. WINDING
• 2.3.4. TAP CHANGING `
• 2.3.5. CONSERVATOR
• 2.3.6. BREATHER
• 2.3.7. VALVES
• 2.3.9. TEMPERATURE GAUGE
• 2.3.10. RADIATORS
• 2.3.11. BUSHINGS
• 2.3.11.1. TYPES OF INSULATORS
 2.4. TYPES OF TRANSFORMERS
• 2.4.1. CORE TYPE TRANSFORMER
• 2.4.2. SHELL TYPE TRANSFORMER
• 2.4.3. DISTRIBUTION TRANSFORMER
• 2.4.4. POWER TRANSFORMER

CHAPTER-3

STEAM GENERETOR (BOILER)

 3.1. DATA SHEET OF BOILER


 3.2. SAFETY VALVE DETAILS
 3.3. HEAT BALANCE DIAGRAM
 3.4. BOILER PROTECTION
 3.5. BURNER MANAGEMENT SYSTEM
 3.6. FEEDERS

CHAPTER-4

GENERATOR
 4.1. GENERATOR PROTECTION
 4.2. GENERATOR INSTRUMENTATION

CHAPTER-5

STEAMTURBINE

 5.1. TURBINE PROTECTION


 5.2. STEAM PRESSURES BY TEMPERATURES
 5.3. LIMIT AND SETTING VALUES FOR STEAM TURBINE
 5.4. LIMITS FOR M.R.T OF STEAM TURBINES

 5.5. STEAM TURBINE CONTROL

CHAPTER-6

FEED WATER SYSTEM

 6.1. FEED WATER PUMPS


 6.1.1. TURBINE DRIVEN BOILER FEED PUMP
 6.2. DESING PARAMETERS
 6.3. MD BFP TRIP CONDITIONS
 6.4. TURBINE DRIVEN BFP

CHAPTER-7

RELAYS

 7.1. INTRODUCTION
 7.2. DIFFERENT TYPES OF RELAYS
 7.2.1. ELECTROMAGNETIC RELAY
 7.2.2. ATTRACTION TYPE RELAY
 7.2.3. INDUCTION TYPE
 7.2.4. MAGNETIC LATCHING TYPE
 7.2.5. SOLID STATE TYPE
 7.3. RELAYS USED IN TRANSFORMER PROTECTION
 7.4. 7DIFFERENTIAL RELAY FOR TRANSFORMER
 7.4.1. TIME OVER CURRENT RELAY
 7.4.2. GAS DETECTOR RELAY
 7.4.3. PRESSURE RELAY
 7.4.4.THERMAL RELAY

CONCLUSION

You might also like