Ref No: TAG/11/2020

Date: 4th August 2020

Internal Career Opportunities:

Assistant Manager (IL6) Vacancies - Cycle 2
(For locations across the company)

Position Assistant Manager

Level IL6 (For locations across the company)
Domain
Minimum Qualification
(Test Cluster)
Full time Post Graduate Degree / Post Graduate Diploma / MBA /
Administration Degree or Diploma in Engineering / Graduate in any discipline from
a recognized institute.
Full Time Engineering Degree / Diploma in any discipline from a
Agglomerates
recognized Institute or Ex OT.
Full Time Engineering Degree / Diploma in any discipline from a
Blast Furnace
recognized Institute or Ex OT.
Full Time Engineering Degree / Diploma in Civil from a recognized
Civil
Institute
Full Time Engineering Degree / Diploma in any discipline from a
Coke Plant
recognized Institute or Ex OT.
Full Time Engineering Degree / Diploma in any discipline from a
Cold Rolling
recognized Institute or Ex OT.
Full Time Engineering Degree / Diploma in Mechanical /
Engineering Services Production/ Industrial Engineering/ Civil from a recognized
Institute.
Fabrication & Full Time Engineering Degree / Diploma in Mechanical /
Assembly Production from a recognized Institute
Full Time Engineering Degree / Diploma in any discipline from a
Minimum Fuel Management recognized Institute or Ex OT / Graduate in Science from a
Qualifications recognized Institute.
for Domain Full Time Engineering Degree / Diploma in any discipline from a
Hot Rolling
recognized Institute or Ex OT.
Full time Post Graduate Degree / Post Graduate Diploma / MBA /
Logistics and Supply
Degree or Diploma in Engineering / Graduate in any discipline
Chain
from a recognized Institute
Full time Post Graduate Degree / Post Graduate Diploma / MBA /
Marketing & Sales Degree or Diploma in Engineering / Graduate in any discipline
from a recognized Institute.
Full time Degree in Engineering or equivalent (AMIE) or Diploma
Mining Operations
in Mining with Second Class Mine Manager Competency
(Coal)
Certificate (Coal)
Full Time Engineering Degree / Diploma in Mechanical /
Mobile Equipment &
Production/ Industrial Engineering/ Automobile Engineering from
Loco Maintenance
a recognized Institute.
Natural Resource
Full time B. Sc. in Chemistry from recognized Institute / University.
Division - Chemical
Full Time Engineering Degree / Diploma in Mechanical from a
New Material Business
recognized Institute
Full Time Engineering Degree / Diploma in Mechanical / Electrical
Power Plant
/ Electronics / Power Engineering / Instrumentation from a
Operations
recognized Institute.
Product Technology Full Time Engineering Degree / Diploma in Metallurgy/ Material
1
 (Quality Assurance) Science/ Mechanical/ Production Engineering from recognized
institute.
Full Time Engineering Degree / Diploma in Ceramics from a
Refractories
recognized Institute or Ex OT.
Full Time Engineering Degree / Diploma in any discipline /
Safety
Graduate / Post graduate in Science from a recognized Institute.
Full Time Engineering Degree / Diploma in any discipline from a
Steel Making
recognized Institute or Ex OT.
Full Time Engineering Degree / Diploma in any discipline from a
Wire Drawing
recognized institute or Ex OT.
Full Time Engineering Degree / Diploma in any discipline from a
Wire Rod Rolling
recognized institute or Ex OT.
1) All permanent employees of Tata Steel, possessing the requisite qualification and
experience are eligible to apply.
2) Employees, with Only full-time qualification, are eligible to apply. Part time courses,
distance education programs and correspondence courses are not eligible;

However, employees who have acquired the following diploma level certificate / degree
level certificate in engineering from professional bodies / institutions as on date are also
eligible to apply.

 AMIIM from Indian Institute of Metal, Kolkata

 AMIE from Indian Institute of Engineers
 Diploma in Mechanical Engineering from Institute of Mechanical Engineers(India)
 Diploma in Electronics & Telecommunications Engineering from Institute of
Electronics & Telecommunications Engineering, New Delhi
 Section A and Section B of Institution examinations from Institute of Computer
Engineers of India
 BE in Mechanical Engineering from the institute of Engineers of India

Employees who had enrolled prior to 10.06.2002 and have acquired diploma level
certificate / degree level certificate in engineering from the Indian Institute of Engineers
(India), Mumbai during the period 10.6.2002 to 16.10.2006 are also eligible to apply.
Eligibility
Employees undergoing the above diploma level certificate / degree level certificate in
engineering from professional bodies / institutions who have already appeared for the
final examination as on date will be eligible to apply and get assessed for the Internal IL6
selection process.

Employees undergoing the Company sponsored Three Year Diploma Course at NIT
Jamshedpur (Batch of 2017-2020) who have appeared for the final year exams will be
eligible to apply and get assessed for the Internal IL6 selection process.

However, promotion (subject to clearing written test and being found suitable in
Interview) of such employees would be effective only after the candidate(s) successfully
complete(s) the programme and submit(s) the Pass certificate to TAG.

3) Experience Eligibility
a) Employees applying with B.E. / B.Tech. / M.E. / M.Tech. or equivalent
qualifications (wherever applicable) must have minimum of 5 (five) years of
experience in Tata Steel.
b) Employees applying with Diploma / Post Graduate / Graduate degree must have
minimum 7 (seven) years of experience in Tata Steel.
c) Non OPR diploma holders, recruited laterally having minimum relevant
2
 experience of 4 (four) years prior to joining Tata Steel and having completed 5
(five) years in Tata Steel on the last day of application of the selection process,
are also eligible to apply.
Written test (domain), behavioral assessment and interview. The written test and
Selection behavioral assessment will be conducted online.
Method Specific guidelines pertaining to online assessment will be shared with the eligible
candidates before written test.
1. Selected candidates will undergo necessary induction training.
2. They will be placed against vacancies as per the domain in which they have applied
Training and
3. The positions are across locations of Tata Steel India.
Placement
4. The selected candidates can be placed and / or transferred to any locations of Tata
Steel or its subsidiaries during their employment.
1. Technical test for the domains will be different. Candidates need to select the domain
in which they want to apply at the time of application. Forms once submitted will be
considered as final and no request for change of domain will be accepted.
2. An individual can apply for any two domains (Test Clusters) in one or more cycles
during a Financial Year. For eg: If a candidate has already applied for Electrical domain
in last advertisement (May 2020), in this cycle he/she can apply for only one more
domain. However, if the candidate had applied for both Electrical & Electrical –
Transmission & Distribution in the last cycle (May 2020), then the candidate will not
be eligible to apply for any more domains in this cycle. However, if the candidate did
Other Terms not apply for any domain in the May 2020 cycle, then the said candidate can apply for
& Conditions any two domains.
(Read 3. The last date for submission (19th Aug 2020) of applications will be taken as cut-off date
Thoroughly) for considering experience.
4. Training period in Tata Steel, before being confirmed will not be counted as experience.
5. The qualification of the candidates must be from AICTE / UGC recognized Institutes and
courses.
6. Employees selected as Asst. Manager (IL6) will not be allowed to revert to their original
position, at any point after their selection.
7. If the information submitted by the candidate is found to be incorrect, during or after
the selection process, the candidate will be removed from the selection process and
suitable action will be taken.
8. Canvassing in any form will disqualify the candidate
1. Please click on the link below to fill up the online application form
How to Apply http://176.0.0.99:8080/recruit/Location.aspx
2. The last date of receipt of application is 19th Aug 2020

Note: Indicative Course Content is given below

(Neena Bahadur)
Head HRM (TAG)

3
 Indicative Syllabus for IL6 2020 - Cycle 2

S. No. Domain Topic

a) TQM Basics
b) Customer Relations
c) Project Management Skill
d) Safety - Office Safety
e) Resource Management
1. Administration f) Travel / Arrangement Trends
g) Communication System
h) Basic IT Skill
i) Record Keeping
j) Team Management
k) External Stakeholder management
a) Raw Material Bedding & Blending (Receiving, Storing, Crushing & Making
Base Mix.)
b) Sinter Making Process & Mechanism
c) Sinter Dispatch & Quality
2. Agglomerates d) Drying & Grinding process of iron ore
e) Green Pelletizing
f) Induration Process
g) Raw Material Handling & Pellet Dispatch
h) Pellet Dispatch & Quality
a) Raw Material of Blast Furnace & its quality
b) Stock House Operation & Charging System
c) Basic Principles of Blast Furnace operation
d) Blast Furnace Operation (All Blowing Parameters)
e) Stove Operation
Blast Furnace f) Injection System
3.
g) Cast House Operation
h) Blast furnace irregularities
i) Handling of different emergency situations
j) Alternative route of iron making process
k) Heat and mass balance of blast furnace
l) Derivation of different formulas in blast furnace iron making
a) Applied Mechanics
b) Strength of Materials, Materials Engineering - Chemical composition and
physical properties of different grades of steel, stress strain diagram,
elongation
c) Design of Steel structure - Design of welded and bolted joints, trusses,
steel foundation, girders, etc.
d) Design of Reinforced Concrete Structure - beams, columns, slabs,
4. Civil
retaining wall and foundation
e) Masonry Structures - design and maintenance techniques
f) Estimating, costing and Valuation
g) Surveying
h) Civil Engineering Drawing
i) Concrete Technology - concrete- mix design. grading
j) Transportation Engineering - Design of road, maintenance of road, road

4
 management, traffic density, road furniture & road safety, Permanent
way engineering
k) Public Health Engineering - Design and maintenance of drain, manholes,
sewer line road side drain, finalization of layout based on level etc.
l) Building construction Materials, properties of aggregates, bricks, cement
properties,
m) Construction Management
n) Computer Application for Engineering - CAD technique
o) Structural Analysis- determinant structures - truss, trestles, towers,
Behaviour of different structures under various loading conditions -
simply supported beams, beams fixed at both ends, trusses, trestles,
framed structures, stability of structures
p) Elementary soil mechanics and foundation engineering, compaction,
consolidation, slope analysis
q) Soil waste management
r) Water resource Engineering
s) Town Planning Engineering
a) Coal characterization
b) Carbonization process
c) Battery Heating process
d) Oven Machines
e) Coal & Coke Handling
5. Coke Plant f) Coke Dry Quenching
g) Coal blending
h) Coke properties
i) Battery Anchorage system
j) BPP Gas Processing Operation
k) BPP Liquor Processing Operation
a) Iron-Carbon System, CCT & TTT Diagram
b) Recovery-Recrystallization- Grain Growth Kinetics
c) Flat Rolling Fundamentals
d) Pickling Process
e) Cold Rolling Process
Cold Rolling f) Electrolytic Cleaning Process
6.
g) Batch and Continuous Annealing
h) Defects in Cold Rolled Sheets
i) Physical testing of cold rolled products
j) Welding - Flash but and seam welding
k) Basics of Galvanizing
l) Basics of IATF 16949
a) Applied Mechanics
b) Strength of Materials
c) Design of Steel & Masonry Structures
d) Design of Reinforced Concrete Structure
e) Estimating, costing and Valuation
f) Surveying
Engineering g) Civil Engineering Drawing
7.
Services h) Concrete Technology
i) Transportation Engg
j) Public Health Engg.
k) Building Materials
l) Computer Application for Engg.
m) Engineering Thermodynamics
n) Fluid Mechanics
8. Fabrication & a) Fabrication & Welding: Theory of fabrication & Welding. Welding

5
 Assembly processes (eg. SMAW, GMAW, SAW etc.) & weldability of material like
MS, SS, CS, CI etc., Weld positioners and weld fixtures, Welding
parameters, their relation & deposit calculation and welding time
calculation and their impact on the weld quality for various welding
processes, Different kinds of Power sources, auxiliaries like wire feeder,
torch, holder, conduit, tip etc.
b) Gas cutting: Cutting parameters like Cut Oxy pressure, LPG flow rate,
cutting speed etc. & their impact on quality of gas cutting, Selection of
nozzles for various cutting and knowledge of plasma cutting, Lead in &
lead out and precautions when input is rusted or flat
c) Limit, Fit and Tolerance & Measuring Instruments
d) Engineering Drawing: Basic concepts of engineering dwg, Angle of
projection, types of engineering drawing & their application, Jigs and
fixture.
e) Mech Assembly Practice: Couplings, Bearings, Gears, Power
Transmission, Levelling & Alignment. Balancing (dynamic and static).
f) Fluid Power: Hydraulics & Pneumatics.
g) Lubrication Systems.
h) Codes & Standards applicable for Fabrication & Assembly, ISO, TQM
i) Work Place Safety & M/c Guarding
j) Mass manufacturing, Lean manufacturing & fabrication shop lay out
a) Fuel Efficiency
b) Properties of Industrial Gases/By Product Gases/ Steam/Compressed Air
Fuel c) Knowledge of ASU Plant
9. d) Knowledge of CP/BF/PP/Mills/Power House/SMS Operations
Management
e) Boosters and Holders
f) Instrumentation and Measurement
g) Distribution of the Gases and its Costing
a) Iron-Carbon System, CCT & TTT Diagram & its use
b) Recrystallization kinetics
c) Thermo Mechanical Control Process (TMCP)
d) Flat Rolling (Hot) Fundamentals
e) Hot Rolling process – Equipment’s and their functions
f) Basics of Fuel & Combustion
10. Hot Rolling
g) Re-Heating Furnace Operation and Control
h) Knowledge of Rolls & Grinding in Hot Rolling
i) Defects on HR Sheets, Genesis & Control
j) Basics of IATF 16949
k) Basic knowledge of Heat Treatment
l) Knowledge of Different Steel Grades
a) Rail Logistics
b) Road Transportation
c) Coastal Shipment
Logistics and d) Documentation
11. e) Warehousing
Supply Chain
f) Network design
g) Sustainability in logistics
h) Logistics Planning and scheduling
i) Unitization, Loading and lashing
Marketing & a) Analyzing the marketing environment
12. b) Market Segmentation, Targeting and Positioning
Sales
c) Marketing Communications - (PPA)
6
 d) Role of Sales & Key Deliverables of Sales
e) Difference between B to C and B to B
f) Channel Management & Distribution
a) Excavation planning
b) Dump and slope stability
c) Drilling and Blasting
d) Coal Quality
Mining
e) Basic understanding of IT infrastructure/ usage
13. Operations
f) Mine Machinery & equipment selection
(Coal)
g) Environmental laws & statutory clearances required to operate a Mine
h) Haul road & Dump design, maintenance & Reclamation
i) Health and Mine safety legislation (DGMS)
j) Mining Geology
a) Automotive Engines
Mobile b) Power transmission
Equipment & c) Fluid Power Engineering
14.
Loco d) Material handling equipment
Maintenance e) Modern Maintenance Practices
f) Fabrication, Welding and Assembly
a) Atomic structure
b) Radio Activity
c) Periodicity of elements
d) General Properties of Atoms and Molecules
e) Oxidation and Reduction, Valence
f) Chemical Equilibrium
g) Ionic equilibria
Natural h) Acids and Bases
Resource i) Buffers
15. j) Reaction Intermediates and Reagent
Division -
Chemical k) Solutions and Colligative Properties
l) Elementary Stereochemistry
m) Noble Gases
n) Titrimetric Analysis
o) Oxidation-Reduction Titrimetry
p) Iodo / Iodometric Titrations
q) Basic sampling concepts
r) Measurement and Quality Control
s) Statistics
a) Introduction to polymer composites
b) Constituents of fibre reinforced polymer matrix: reinforcement (fibres -
glass/ carbon/ aramid/ boron), matrix materials (thermosetting/
thermoplastic), interfaces
c) Understanding of different types of composites:
New Material d) Polymer matrix composites, metal matrix composites, ceramic matrix
16.
Business composites, carbon/glass fibre composites
e) Different manufacturing techniques: hand lay- up, spray- up, pultrusion,
filament winding, resin transfer moulding, compression moulding.
f) Applications of fibre reinforced polymer composites: infrastructure,
industry, mobility (auto/ rail/ aerospace/ marine), defense and other
special purposes (wind turbine, lpg, etc.).

7
 g) Micro and macro characterization techniques applicable for assessment
of fiber reinforced polymer composites (static mechanical
characterization, dynamic mechanical characterization, scanning
electron microscopy, atomic force microscopy, differential scanning
calorimetry analysis, Fourier transformation infrared analysis.
h) Basics on designing with composites, impact of different in- service
environments, failure mechanism.
i) Challenges for applications.
j) Recyclability
k) An overview of fibre reinforced polymer composites market in India and
globally.
a) Boiler (Basic design and construction, Fuel, Combustion, Operational
concepts and Performance)
b) Water Chemistry (Concepts and Control)
c) Steam Turbine (Operational concepts and Performance)
d) Pumps (Operational concepts and Performance)
Power Plant e) Fans and Compressors (Operational concepts and Performance)
17.
Operations f) Heat Exchangers (Concepts and Performance)
g) Materials and Metallurgy (Concepts and Utilization)
h) Fundamentals of Electrics / Instrumentation
i) Power plant auxiliaries including CW System, compressed air system,
Lube oil system, Furnace draft & flue gas system, Fuel supply system.
j) Engineering drawing
a) Knowledge of Primary Steel Making Processes
b) Secondary metallurgy
c) Casting process
d) Casting defects (Genesis & Control)
Product e) Steel Making Thermodynamics
Technology f) Mechanical Metallurgy
18.
(Quality g) Basics of flat product Rolling and defects
Assurance) h) Knowledge of Different Steel Grades
i) Iron-Carbon System, CCT & TTT Diagram & its use
j) Quality assurance
k) Basics of IATF 16949
l) Knowledge of Total Quality Management
a) Basics of refractory (Type of refractory, different shape, Properties of
refractory)
b) Refractory Raw materials
c) Monolithics (Mortar, Castable, Ramming mass, Gunning mass, DVM,
Plastic mass)
d) Coke Plant refractory (Battery construction, CDQ)
Refractories e) Iron making Refractory (Blast furnace, sinter and pellet)
19.
f) Steel making refractory (BOF, Ladle, RH, Tundish, Caster and black
refractory, Mearz kiln)
g) Mills Refractory (Different type of reheating furnaces)
h) Insulation Refractory (insulation brick, insulation castable and different
type of fibres and ceramic product)
i) Refractory sample preparation and different testing procedure.
j) Phase Diagram (binary and ternary type)
a) Hazard Identification & Risk Assessment (Recalibrated Risk Matrix)
b) Fundamentals of Process safety
c) Behavior based safety
20. Safety
d) Emergency Preparedness
e) Work Permit & Access control
f) Electrical Safety

8
 g) Safety in Material Handling
h) Road & Rail safety
i) Occupational Health, Ergonomics & Industrial Hygiene
j) Fire safety
k) Contractor Safety management
l) Safety Legislation (Factories Act & State Rules)
m) Gas Safety
n) Working at height
o) Positive Isolation
p) Confined space Safety
q) Knowledge on important safety standard for e.g. Excavation,
Transportation, EOT Crane etc.
r) Knowledge on Mechanical Integrity & Quality Assurance
a) Extractive Metallurgy - Iron Making and Steel Making
b) External Hot Metal Treatment – Process & control system
c) Primary Steel Making Processes – Raw materials, different processes
and control, Special practices, Steel making reactions
d) Secondary Metallurgy- Different steel refining processes, Grades of
Steel, Iron - Carbon Diagram
e) Casting Process: Role of different casting accessories and casting
practices.
21. Steel Making f) Casting defects: Slab casting Defects and Billet casting defect, Causes
and its countermeasure
g) Steel Making Thermodynamics: Law of thermodynamics, Enthalpy,
Entropy, Gibbs free energy, Ellingham diagram, Heat capacity
h) Steel Making Refractory: - Converter refractory and Ladle refractory, its
type usage and maintenance
i) Ferro Alloys: Application of different ferro alloys in steel making process
j) EAF technology: Fundamentals of Electric arc furnace

a) Wire rod cleaning (pickling & mechanical descaling) and coating

b) Wire drawing process
c) Heat treatments in wire drawing
Wire Drawing d) Coatings in wire
22.
e) Mechanical properties of wire
f) Applications of wire
g) Productivity concepts in wire manufacturing
h) Dies and lubricants used in wire manufacturing
a) Iron-Carbon System, CCT & TTT Diagram
b) Basics of Fuel & Combustion
c) Re-Heating Furnace Operation and Control
d) Long Product rolling fundamentals
Wire Rod e) Long Product rolling mill equipment
23.
Rolling f) Pass Design Fundamentals
g) Wire rod & Rebar defects
h) Knowledge of Roll materials
i) Rolling Mill Controls
j) Different Grades of Wire Rod and their Application