0% found this document useful (0 votes)
43 views3 pages

Bios Updation

Modern motherboards have BIOS chips that can be updated through flashing, but older boards may require physically removing the chip and replacing or reprogramming it. There are companies that provide BIOS chip replacement services for older boards. Updating the BIOS has some risks, as it could make the computer unusable if something goes wrong. The CMOS RAM, which stores system configuration settings, is a separate component from the BIOS chip.

Uploaded by

Sahil Sahni
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
43 views3 pages

Bios Updation

Modern motherboards have BIOS chips that can be updated through flashing, but older boards may require physically removing the chip and replacing or reprogramming it. There are companies that provide BIOS chip replacement services for older boards. Updating the BIOS has some risks, as it could make the computer unusable if something goes wrong. The CMOS RAM, which stores system configuration settings, is a separate component from the BIOS chip.

Uploaded by

Sahil Sahni
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Bios updation

Modern-day motherboards have EEPROM BIOS chips that can be reprogrammed by software.
These are also referred to as flash PROM or flash ROM, the process by which they're updated
being known as flashing.

If your BIOS isn't flashable it's still possible to update it - provided it's housed in a socketed DIP
or PLCC chip. This involves physically removing the existing chip and either replacing it after
its been reprogrammed with the later version of BIOS code or exchanging it for a completely
new chip. Motherboard manufacturers generally provide a BIOS upgrade service for a limited
period after a particular model of motherboard comes to market. During this period they should
be able to provide you with a patched BIOS containing the latest enhancements and "bug fixes".

The replacement option may also appeal to some who actually have flashable BIOSes ... but also
have a nervous disposition! Notwithstanding the efforts motherboard manufacturers have made
in recent years to simplify the process, the fact remains since flashing overwrites your existing
BIOS, it has the potential of rendering your PC unusable should anything go wrong during the
process or should you inadvertently use an incorrect BIOS file.

For older motherboards there are a number of companies that provide a specialist BIOS chip
replacement service. Some require that you send them your BIOS chip for reprogramming,
others will simply send you a new chip provided you can provide them with the necessary
detailed information on your motherboard and existing BIOS chip.

Motherboard manufacturers:
 Abit
 AOpen
 Asus
 Chaintech
 Epox
 FIC
 Gigabyte
 MSI
 Shuttle
 Soyo
 Transcend
 Tyan.

BIOS chip replacement services:


 BadFlash.Com
 BIOS-Programming Service
 BIOS Recovery Center
 biosupgrade.co.uk
 BIOSWorld
 Micro Firmware
 Recovery BIOS.

Proper identification of the latter will generally require that you peel off all stickers on top of the
chip to reveal the information printed directly on the chip itself.

A DIP chip can be removed using a small flat blade screwdriver or pocket knife. Insert the blade
under one end of the chip and gently lever it until it begins to lift from the socket. Be careful to
keep the angle to which it's raised shallow or you'll risk bending the legs of the chip. Move to the
other end of the chip and lever it to the same level and then some. Repeat the process until the
chip is completely released from the socket.

Removing a PLCC chip is a little more tricky, and it's possible to get a special extraction tool
designed for the purpose.

However, a with care a similar method to that described for a DIP chip will work, especially if
you use a very small jeweller's flat blade screwdriver.
If you're reinstalling the same reprogrammed chip or a replacement chip, first make sure that all
the chip's legs are straight and perfectly in line. Orient the notched end of the chip so that it
aligns with the notch in the socket. Make sure all of the chip's legs are lined up with their
corresponding socket positions and gently push down on the top of the chip until its legs begin to
slide into in the socket. Be careful to confirm that all legs are properly located before applying
stronger pressure to fully seat the chip in its socket.

People often confuse CMOS RAM with their BIOS, thinking of them as one and the same; in
fact they're completely separate components.

The former is a block of memory made from very low power consumption CMOS
(complementary metal oxide silicon) RAM chips, which is kept "alive" by a battery even when
the PC's power is off. It's used to store basic information about the PC's configuration: number
and type of hard and floppy drives, how much memory, what kind and so on. The other
important data kept in CMOS memory is the time and date, which is updated by a Real Time
Clock (RTC), the clock, CMOS RAM and battery all typically being integrated into a single
chip.

All this used to be entered manually, but these days auto-configuring BIOSes copy the
manufacturer default factory settings from the BIOS chip to the CMOS RAM, where they can be
subsequently customised via the BIOS Setup interface. These factory default settings can be
reinstated, either by discharging the CMOS RAM by jumpering a motherboard pin header or by
invoking the Load BIOS Setup Defaults option from Setup.

You might also like