This document provides details on a fire-rated metal pipe penetration system for concrete floors or block walls. The system allows for pipes up to 10 inches in diameter to penetrate a concrete assembly with a 2-hour fire rating. Mineral wool is packed around the pipe and firestop sealants are applied to maintain the fire rating. The system achieved a Class I W-Rating and has an L-Rating of less than 1 CFM/sq ft at ambient and 4 CFM/sq ft at 400°F.
This document provides details on a fire-rated metal pipe penetration system for concrete floors or block walls. The system allows for pipes up to 10 inches in diameter to penetrate a concrete assembly with a 2-hour fire rating. Mineral wool is packed around the pipe and firestop sealants are applied to maintain the fire rating. The system achieved a Class I W-Rating and has an L-Rating of less than 1 CFM/sq ft at ambient and 4 CFM/sq ft at 400°F.
This document provides details on a fire-rated metal pipe penetration system for concrete floors or block walls. The system allows for pipes up to 10 inches in diameter to penetrate a concrete assembly with a 2-hour fire rating. Mineral wool is packed around the pipe and firestop sealants are applied to maintain the fire rating. The system achieved a Class I W-Rating and has an L-Rating of less than 1 CFM/sq ft at ambient and 4 CFM/sq ft at 400°F.
This document provides details on a fire-rated metal pipe penetration system for concrete floors or block walls. The system allows for pipes up to 10 inches in diameter to penetrate a concrete assembly with a 2-hour fire rating. Mineral wool is packed around the pipe and firestop sealants are applied to maintain the fire rating. The system achieved a Class I W-Rating and has an L-Rating of less than 1 CFM/sq ft at ambient and 4 CFM/sq ft at 400°F.
C-AJ-1149 METAL PIPE THROUGH CONCRETE FLOOR/WALL OR BLOCK WALL F-RATING = 2-HR.
CAJ1149n.101804 T-RATING = 0-HR. L-RATING AT AMBIENT = LESS THAN 1 CFM/SQ. FT. L-RATING AT 400° F = 4 CFM/SQ. FT. W-RATING = CLASS I (SEE NOTE NO. 4 BELOW) TOP VIEW SECTION A-A 2 5 1 A A
1. CONCRETE FLOOR OR WALL ASSEMBLY (2-HR. FIRE-RATING):
A. ANY LIGHTWEIGHT OR NORMAL WEIGHT CONCRETE FLOOR OR WALL (MINIMUM 4-1/2" THICK). B. ANY UL/cUL CLASSIFIED CONCRETE BLOCK WALL. 2. PENETRATING ITEM TO BE ONE OF THE FOLLOWING: A. MAXIMUM 10" NOMINAL DIAMETER STEEL PIPE (SCHEDULE 10 OR HEAVIER). B. MAXIMUM 10" NOMINAL DIAMETER CAST IRON PIPE. C. MAXIMUM 4" NOMINAL DIAMETER COPPER PIPE OR TUBING. D. MAXIMUM 4" NOMINAL DIAMETER STEEL CONDUIT. E. MAXIMUM 4" NOMINAL DIAMETER EMT. 3. MINIMUM 3" THICKNESS MINERAL WOOL (MINIMUM 4 PCF DENSITY) TIGHTLY PACKED FOR NOMINAL 4" DIAMETER (AND SMALLER), AND MINIMUM 4" THICKNESS MINERAL WOOL (MINIMUM 4 PCF DENSITY) TIGHTLY PACKED FOR PIPES GREATER THAN NOMINAL 4" DIAMETER. 4. MINIMUM 1/2" DEPTH HILTI FS-ONE INTUMESCENT FIRESTOP SEALANT, CP 601S ELASTOMERIC FIRESTOP SEALANT, CP 604 SELF-LEVELING FIRESTOP SEALANT, OR CP 606 FLEXIBLE FIRESTOP SEALANT. 5. MINIMUM 1/2" BEAD HILTI FS-ONE INTUMESCENT FIRESTOP SEALANT, CP 601S ELASTOMERIC FIRESTOP SEALANT, OR CP 606 FLEXIBLE FIRESTOP SEALANT APPLIED AT POINT OF CONTACT. (NOT REQUIRED WHEN CP 604 SELF-LEVELING FIRESTOP SEALANT IS USED, ITEM NO. 4). NOTES : 1. MAXIMUM DIAMETER OF OPENING = 12". 2. ANNULAR SPACE = MINIMUM 0", MAXIMUM 1-1/4". 3. MINIMUM 1/2" DEPTH HILTI FS-ONE INTUMESCENT FIRESTOP SEALANT, CP 601S ELASTOMERIC FIRESTOP SEALANT, OR CP 606 FLEXIBLE FIRESTOP SEALANT IS REQUIRED ON BOTH SIDES OF A WALL ASSEMBLY. 4. W-RATING APPLIES ONLY WHEN CP 601S ELASTOMERIC FIRESTOP SEALANT OR CP 604 SELF-LEVELING FIRESTOP SEALANT IS USED. Sheet 1 of 1 Drawing No. HILTI, Inc. Tulsa, Oklahoma USA (918) 252-6000 Scale 9/64" = 1" CAJ Date Oct. 18, 2004 1149n
