AIR CYLINDER

A27 - Magnetic A28 - Non-magnetic Series A27, A28

Cat No A27, A28 - 01 - 01
AIR CYLINDERS Double Acting - Ø32 - 100 mm
As per ISO 15552 / VDMA 24562 standards

Features
 Adjustable cushioning at both ends with elastomer pads
 Wide varieties of mountings.
 Magnetic and Non magnetic version
 High temperature (Viton seals) 150°C max.
 Non corrosive Stainless steel piston rod and piston rod
lock nut (SS 304)

Technical Specifications
Cylinder bore Ø ( mm ) 32 40 50 63 80 100
Cushion stroke ( mm ) 21 23 23 23 28 28
Standard strokes * ( mm ) 25 50 80 100 125 160 200 250 300 320 400 500
Medium Compressed air - filtered - lubricated
Working pressure 0.5 - 10 bar

Medium Regular 5° - 60° C

temperature High temperature applications** 5° - 150° C max.
Materials of construction Aluminium, Brass, Nitrile, Steel, Acetal, Polyurethane
Basic cylinder, Foot mounting, Front flange, Rear flange, Male clevis,
Mountings Male clevis (with spherical bearing), Female clevis, Female clevis (King pin),
Front trunnion, Rear trunnion, Centre trunnion
Clevis foot bracket, Wall mounting bracket, Trunnion bracket,
Accessories
Rod end fork, Rod end aligner, Rod end spherical eye
* For Non standard or longer stroke cylinders, contact your regional dealer or JANATICS
** Refer Special Ordering number.

Output force ( force in N : 1N = 0.1 kgf )

Cylinder Working pressure in bar

bore Ø Rod Ø
(in mm) 2 3 4 5 6 7 8 9 10
(in mm)
Extend 145 217 289 362 434 507 579 651 724
32 12
Retract 124 187 249 311 373 435 498 559 621
Extend 226 339 452 565 678 792 905 1018 1130
40 16
Retract 190 285 380 475 570 665 760 855 950
Extend 353 530 706 884 1060 1237 1414 1590 1767
50 20
Retract 297 445 594 742 891 1039 1187 1336 1484
Extend 561 842 1122 1403 1683 1964 2244 2525 2805
63 20
Retract 505 757 1009 1261 1514 1766 2018 2270 2523
Extend 905 1357 1809 2262 2714 3167 3619 4072 4524
80 25
Retract 816 1225 1633 2041 2449 2857 3266 3674 4082
Extend 1414 2120 2828 3534 4241 4948 5655 6362 7069
100 25
Retract 1325 1988 2650 3313 3976 4640 5300 5965 6625

( Above values have been worked out taking frictional loss into consideration )

1.2.1
 AIR CYLINDER
Series A27, A28
Cat No A27, A28 - 01 - 01
Basic cylinder

+ Add stroke
Cylinder KK AM MM SW2 L12 SW1 B VD VA L2 E G TG RT BG EE PL L7 WH Tol ZB Tol L8 Tol L9 Stroke
bore Ø e11 max min tol

32 M10x1.25 22 12 10 6 17 30 6 4 18.5 45 25.5 32.5 M6 16 G1/8 13 5 26 120 94 ± 0.6 5

±1
+2
40 M12x1.25 24 16 13 6.5 19 35 6.5 4 20.5 51 29 38 M6 16 G1/4 14.5 5 30 ± 1.4 135 105 ± 0.7 5
+0
50 M16x1.5 32 20 16 8 24 40 6.5 4 28 64 29 46.5 M8 16 G1/4 15 7.5 37 143 106 ± 0.7 6

63 M16x1.5 32 20 16 8 24 45 6.5 4 27.5 74 35 56.5 M8 16 G3/8 17 10 37 158 121 ± 0.8 6

± 1.1
+ 2.5
80 M20x1.5 40 25 21 10 30 45 6.5 4 34 94 35 72 M10 16 G3/8 18 14 46 ± 1.8 174 128 ± 0.8 6
+0
100 M20x1.5 40 25 21 10 30 55 6.5 4 35 111 38.5 89 M10 16 G1/2 18 10 51 189 138 ±1 6

Foot mounting + Add stroke

Cylinder TR AB AH AO AT E d* SA Tol XA Tol Recommended Ordering
bore Ø ±0.3 H14 Js16 max Bolt size No

32 32 7 32 8 4 46 5.8 142 144 M6 ML1032

40 36 10 36 10 4 52 7.8 161 ±1.25 163 ±1.25 M8 ML1040

50 45 10 45 12 5 65 7.8 170 175 M8 ML1050

63 50 10 50 12 5 75 7.8 185 190 M8 ML1063

80 63 12 63 17 6 95 9.8 210 ±1.6 215 ±1.6 M10 ML1080

100 75 14.5 71 19 6 115 11.8 220 230 M12 ML1100

* Suitable for reaming

Front flange
+ Add stroke
Cylinder TF R FB MF UF E W Tol Recommended Ordering
bore Ø ±0.3 ±0.3 H13 Bolt size No

32 64 32 7 10 80 50 16 M6 MF1032

40 72 36 9 10 90 55 20 ±1.6 M8 MF1040

50 90 45 9 12 110 68 25 M8 MF1050

63 100 50 9 12 125 78 25 M8 MF1063

80 126 63 12 16 155 100 30 ±2 M10 MF1080

100 150 75 14 16 185 120 35 M12 MF1100

1.2.2
 AIR CYLINDER
Series A27, A28
Cat No A27, A28 - 01 - 01
Rear flange
+ Add stroke
Cylinder TF R FB MF UF E ZF Tol Recommended Ordering
bore Ø ±0.3 ±0.3 H13 Bolt size No

32 64 32 7 10 80 50 130 M6 MF1032

40 72 36 9 10 90 55 145 ±1.25 M8 MF1040

50 90 45 9 12 110 68 155 M8 MF1050

63 100 50 9 12 125 78 170 M8 MF1063

80 126 63 12 16 155 100 190 ±1.6 M10 MF1080

100 150 75 14 16 185 120 205 M12 MF1100

Male clevis + Add stroke

Cylinder CD EW Tol L MR E XD Tol Ordering
bore Ø H9 min max max No

32 10 26 12 11 45 142 MS1032

40 12 28 15 13 51 160 ±1.25 MS1040

50 12 32 15 13 64 170 MS1050
- 0.2
- 0.6
63 16 40 20 17 74 190 MS1063

80 16 50 20 17 94 210 ±1.6 MS1080

100 20 60 25 21 111 230 MS1100

Male Clevis (with spherical bearing)

Bore CN EN EU L L1 ER SQ E SQ L2 FL ØD L3 @ Recommended Ordering

dia H7 max TG H11 min Bolt size * no.

32 10 14 10.5 - 13.5 15.5 44.5 32.5 5.5 22 30 M6 x 20 MG1032

40 12 16 12 15.5 - 17.5 50.5 38 5.5 25 35 M6 x 20 MG1040

50 16 21 15 - 19min 20.5 63.5 46.5 6.5 27 40 M8 x 20 MG1050

4.5 ±4°
63 16 21 15 19min - 22.5 73.5 56.5 6.5 32 45 M8 x 20 MG1063

80 20 25 18 - 24min 27.5 93.5 72 10 36 45 M10 x 25 MG1080

100 20 25 18 24min - 29.5 110.5 89 10 41 55 M10 x 25 MG1100

Supplied with 4nos. of screws
*

1.2.3
 AIR CYLINDER
Series A27, A28
Cat No A27, A28 - 01 - 01
Female clevis + Add stroke
Cylinder EK CB L MR EB XD Tol Ordering
bore Ø e8 H14 min max max No

32 10 26 12 11 56 142 MD1032

40 12 28 15 13 65 160 ±1.25 MD1040

50 12 32 15 13 73 170 MD1050

63 16 40 20 17 86 190 MD1063

80 16 50 20 17 106 210 ±1.6 MD1080

100 20 60 25 21 129 230 MD1100

Female clevis (King pin) + Add stroke

Cylinder JK CG R1 MR SQ E XD Tol Ordering
bore Ø h9 D10 max No

32 10 14 17 11 45 142 MK1032

40 12 16 20 13 51 160 ±1.25 MK1040

50 16 21 22 18 64 170 MK1050

63 16 21 25 18 74 190 MK1063

80 20 25 30 22 94 210 ±1.6 MK1080

Retaining clip type Circlip type
(For Ø32 - 63mm) (For Ø80 - 100mm)
100 20 25 32 22 111 230 MK1100

Front trunnion
+ Add stroke
Cylinder TD TL TM UW TT R L1 Tol L2 Ordering
bore Ø e9 h14 h14 approx No

32 12 12 50 48 16 1 18 2 MT1032

40 16 16 63 55 22 1.6 19 ±1.5 0 MT1040

50 16 16 75 70 24 1.6 25 3 MT1050

63 20 20 90 86 28 1.6 23 -1 MT1063

80 20 20 110 110 32 1.6 30 ±1.8 1.8 MT0080

100 25 25 132 135 40 2 31 -1.2 MT0100

Rear trunnion
+ Add stroke
Cylinder TD TL TM UW TT R L3 Tol L4 Ordering
bore Ø e9 h14 h14 approx No

32 12 12 50 48 16 1 128 16 MT1032

40 16 16 63 55 22 1.6 146 ±1.5 19 MT1040

50 16 16 75 70 24 1.6 155 22 MT1050

63 20 20 90 86 28 1.6 172 24 MT1063

80 20 20 110 110 32 1.6 190 ±1.8 29 MT0080

100 25 25 132 135 40 2 209 33 MT0100

1.2.4
 AIR CYLINDER
Series A27, A28
Cat No A27, A28 - 01 - 01
Centre trunnion
+ Add stroke
Cylinder TD TL TM UW TT R XV
bore Ø e9 h14 h14 ±2

32 12 12 50 48 16 1 73

40 16 16 63 55 22 1.5 82.5

50 16 16 75 70 24 1.6 90

63 20 20 90 86 28 1.6 97.5

80 20 20 110 110 32 1.6 110

100 25 25 132 135 40 2 120

Note : Cylinder with centre trunnion is factory fitted, please contact JANATICS - H.O

Accessories for Air Cylinder series A27, A28

Clevis foot bracket

Cylinder K1 G2 S5 CA CK EM G1 H6 R1 K2 G3 θ° Recommended Ordering
bore Ø Js14 Js14 H13 Js15 H9 - 0.2 Js14 max Bolt size no. @
- 0.6
32 38 18 6.6 32 10 26 21 8 10 51 31 10 M6 AA1032

40 41 22 6.6 36 12 28 24 10 11 54 35 15 M6 AA1040

50 50 30 9 45 12 32 33 12 13 65 45 15 M8 AA1050

63 52 35 9 50 16 40 37 12 15 67 50 15 M8 AA1063

80 66 40 11 63 16 50 47 14 15 86 60 15 M10 AA1080

100 76 50 11 71 20 60 55 15 19 96 70 15 M10 AA1100

@ Adoptable to cylinder with female clevis

Clevis foot bracket (with spherical bearing)

Cylinder K1 G2 S5 CH CN EU G1 H6 ER K2 G3 EN L5 Ordering
bore Ø Js14 Js14 H13 Js15 H7 max Js14 max max -0.1 no. @

32 38 18 6.6 32 10 10.5 21 10 16 51 31 14 1 AB1032

40 41 22 6.6 36 12 12 24 10 18 54 35 16 1 AB1040

50 50 30 9 45 16 15 33 12 21 65 45 21 1 AB1050

63 52 35 9 50 16 15 37 12 23 67 50 21 1 AB1063

80 66 40 11 63 20 18 47 14 28 86 60 25 2 AB1080

100 76 50 11 71 20 18 55 15 30 96 70 25 2 AB1100

@ Adoptable to cylinder with female clevis

Wall mounting bracket

Cylinder TG D2 L2 FL θ° Recommended Ordering Ordering
bore Ø Bolt size no. @ no. #

32 32.5 6.6 5.5 22 90 M6 AV1032 AW1032

40 38 6.6 5.5 25 90 M6 AV1040 AW1040

50 46.5 9 6.5 27 90 M8 AV1050 AW1050

63 56.5 9 6.5 32 90 M8 AV1063 AW1063

80 72 11 10 36 60 M10 AV1080 AW1080

100 89 11 10 41 60 M10 AV1100 AW1100

@ Adoptable to cylinder with male clevis

# Adoptable to cylinder with female clevis

1.2.5
 AIR CYLINDER
Series A27, A28
Cat No A27, A28 - 01 - 01
Trunnion bracket

Cylinder B1 B2 A d1 d2 d3 H1 H2 H3 K5 Ordering
bore Ø H13 H9 Js14 no.

32 46 18 32 ±0.2 11 6.6 12 30 15 ±0.1 23 71 AT032

40 55 21 36 ±0.2 15 9 16 36 18 ±0.1 27 87 AT040

50 55 21 36 ±0.2 15 9 16 36 18 ±0.1 27 99 AT040

63 65 23 42 ±0.2 16.5 11 20 40 20 ±0.1 29 116 AT063

80 65 23 42 ±0.2 16.5 11 20 40 20 ±0.1 29 136 AT063

100 75 28.5 50 ±0.2 20 14 25 50 25 ±0.1 37 164 AT100

Rod end Fork ( ISO 8140 )

Cylinder KK CE CK CM LE ER CL Ordering
bore Ø f8 B12 max no.

32 M10 x 1.25 40 10 10 20 16 20 AF010

40 M12 x 1.25 48 12 12 24 19 24 AF012

50 / 63 M16 x 1.5 64 16 16 32 25 32 AF016

80 / 100 M20 x 1.5 80 20 20 40 32 40 AF020

Rod end Aligner

Cylinder KK L1 L2 L3 H1 H2 D1 U ± θ° Ordering
bore Ø no.

32 M10 x 1.25 20 14 65 17 8 28 0.75 5 AR010

40 M12 x 1.25 22 18 75 19 10 32 1 5 AR012

50 / 63 M16 x 1.5 25 22 91 27 13 41 1 5 AR016

80 / 100 M20 x 1.5 30 28 112 32 16 50 1.5 5 AR020

Rod end spherical eye ( ISO 8139 )

Cylinder KK CN T EN CE LE ER AX SW Z Ordering
bore Ø H9 h12 min max no.

32 M10 x 1.25 10 10.5 14 43 15 14 20 17 AP010

13°
40 M12 x 1.25 12 12 16 50 17 16 22 19 AP012

50 / 63 M16 x 1.5 16 15 21 64 22 21 28 22 AP016

15°
80 / 100 M20 x 1.5 20 18 25 77 26 25 33 30/32 AP020

1.2.6
 AIR CYLINDER
Series A27, A28
Cat No A27, A28 - 01 - 01
ACCESSORIES FOR MAGNETIC CYLINDERS Series A25, A27

REED SWITCH

Function
The reed switch and clamping kit assembly is mounted on the Air cylinder (Series A25, A27), for proximity
sensing. The piston of the cylinder is equipped with a permanent magnet which activates the reed switch on
approaching it. The reed switch closes the circuit giving an electrical signal, which could be used further as
required. The accuracy of the sensing distance depends on the speed of operation of the piston.

Technical Specifications - Reed Switch

Model 880006
Operating voltage DC / AC 5 - 240V
Switching current 100mA max
Switch rating 10 W max
Voltage drop 3.5V max.
Response time On + off <1ms
Switching logic SPST, Normally open
Operating temperature -10° to +70° C
Shock 30 G
Vibration 9G
Protection circuit None
Type of protection IEC 529, IP67
Colour of LED Green
Cable Ø4, 2C, 2meter

Cylinder X Y Ordering no. Ordering no. Ordering

bore Ø for Clamp Reed Switch no.
(a) (b) (a+b)
32 37 29
40 40 31 SA0001 AM1032
50 44 37
880006
63 45 48 SA0002 AM1063
80 57 -
SA0003 AM1080
100 65 -

Circuit and connect diagram

1.2.7
 AIR CYLINDER
Series A27, A28
Cat No A27, A28 - 01 - 01
How to order
A

Model Piston Ø (mm) Stroke (mm) Mountings Special Cylinders

27 Magnetic cylinder 032 - Ø 32 025 - 25 O - Basic H - High temp
28 Standard cylinder 040 - Ø 40 050 - 50 L - Foot Mounting S - SS piston rod
050 - Ø 50 080 - 80 F - Front Flange
063 - Ø 63 100 - 100 R - Rear Flange
080 - Ø 80 125 - 125 S - Male Clevis
100 - Ø 100 160 - 160 G - Male Clevis
(with spherical bearing)
200 - 200 D - Female Clevis
250 - 250 K - Female Clevis
(King pin)
300 - 300
M - Rear Trunnion
320 - 320
N - Front Trunnion
400 - 400
T - Center Trunnion
500 - 500

Example :
Ordering no. for standard cylinder with 40 dia bore, 50 mm stroke with female clevis mounting with High temp:
A28 040 050 D - T

Note :
If ordered as 40 dia, 50 mm stroke cylinder, Basic cylinder A28 040 050 O will be supplied.
For repeat order when the details are taken from cylinder nameplate, mention the mounting style separately.
For ordering Accessories refer corresponding tables for ordering numbers.
For ordering individual Mounting kits ( If needed separately ) the order numbers are as below

Cylinder Foot Front / Rear Female Front / Rear Female clevis

bore Ø mounting * Male clevis * clevis * trunnion * (King pin) *
flange *

32 ML1032 MF1032 MS1032 MD1032 MT1032 MK1032

40 ML1040 MF1040 MS1040 MD1040 MT1040 MK1040
50 ML1050 MF1050 MS1050 MD1050 MT1050 MK1050
63 ML1063 MF1063 MS1063 MD1063 MT1063 MK1063
80 ML1080 MF1080 MS1080 MD1080 MT0080 MK1080
100 ML1100 MF1100 MS1100 MD1100 MT0100 MK1100

* Supplied with 4nos. of screws

For your special requirements of cylinders or for further informations contact your regional dealer or JANATICS

Subject to change

1.2.8