Scribd
Upload
101 views1 page

Product Data Sheet: Dehnguard® Modular DG M TNC 150 (952 313)

This document provides product data and specifications for the DEHNguard modular surge arrester DG M TNC 150. The arrester is a complete prewired unit consisting of a base and plug-in protection modules for use in TN-C power systems, with a nominal voltage of 120/240V and maximum discharge current of 40kA.

Uploaded by

sherub wangdi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
101 views1 page

Product Data Sheet: Dehnguard® Modular DG M TNC 150 (952 313)

This document provides product data and specifications for the DEHNguard modular surge arrester DG M TNC 150. The arrester is a complete prewired unit consisting of a base and plug-in protection modules for use in TN-C power systems, with a nominal voltage of 120/240V and maximum discharge current of 40kA.

Uploaded by

sherub wangdi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Product Data Sheet: DEHNguard® modular

DG M TNC 150 (952 313)


■ Prewired complete unit consisting of a base part and plug-in protection modules
■ High discharge capacity due to heavy-duty zinc oxide varistors / spark gaps
■ High reliability due to "Thermo Dynamic Control" SPD monitoring device

Figure without obligation

Basic circuit diagram DG M TNC 150 Dimension drawing DG M TNC 275


Modular surge arrester for use in TN-C systems.
Type DG M TNC 150  
Part No. 952 313  
SPD according to EN 61643-11 / IEC 61643-11 type 2 / class II   
Energy coordination with terminal equipment (≤ 10 m) type 2 + type 3   
Nominal voltage (a.c.) (UN) 120 / 240 V (50 / 60 Hz)   
Max. continuous operating voltage (a.c.) (UC) 150 V (50 / 60 Hz)   
Nominal discharge current (8/20 µs) (In) 15 kA  
Max. discharge current (8/20 µs) (Imax) 40 kA  
Voltage protection level (UP) ≤ 0.7 kV  
Voltage protection level at 5 kA (UP) ≤ 0.55 kV  
Response time (tA) ≤ 25 ns  
Max. mains-side overcurrent protection 125 A gG  
Short-circuit withstand capability for max. mains-side overcurrent
protection (ISCCR) 50 kArms  
Temporary overvoltage (TOV) (UT) – Characteristic 175 V / 5 sec. – withstand   
Temporary overvoltage (TOV) (UT) – Characteristic 230 V / 120 min. – safe failure   
Operating temperature range (TU) -40 °C ... +80 °C   
Operating state / fault indication green / red   
Number of ports 1   
2
Cross-sectional area (min.) 1.5 mm solid / flexible   
2 2
Cross-sectional area (max.) 35 mm stranded / 25 mm flexible   
For mounting on 35 mm DIN rails acc. to EN 60715   
Enclosure material thermoplastic, red, UL 94 V-0   
Place of installation indoor installation   
Degree of protection IP 20   
Capacity 3 module(s), DIN 43880  
Approvals KEMA, UL   
Weight 299 g  
Customs tariff number (Comb. Nomenclature EU) 85363030  
GTIN 4013364123939  
PU 1 pc(s)  

We reserve the right to introduce changes in performance, configuration and technology, dimensions, weights and materials in the course of technical progress. The figures are shown without obligation.

© DEHN + SÖHNE GmbH + Co. KG · Hans-Dehn-Str. 1 · Postfach 1640 · D-92306 Neumarkt · Tel. +499181 906-0 · www.dehn.de

3, te
s ted
: Tested +: New (: Discontinued Model

You might also like