Scribd
Upload
449 views3 pages

13.2.6 Packet Tracer Verify Ipv4 and Ipv6 Addressing

network lab

Uploaded by

cata
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
449 views3 pages

13.2.6 Packet Tracer Verify Ipv4 and Ipv6 Addressing

network lab

Uploaded by

cata
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Packet Tracer - Verify IPv4 and IPv6 Addressing

Addressing Table

Device Interface IP Address / Prefix Default Gateway

R1 G0/0 10.10.1.97 255.255.255.224 N/A

R1 G0/0
2001:db8:1:1::1/64 N/A

R1
S0/0/1 10.10.1.6 255.255.255.252 N/A

R1 S0/0/1
2001:db8:1:2::2/64 N/A

R1 S0/0/1
fe80::1 N/A

R2 S0/0/0 10.10.1.5 255.255.255.252 N/A

R2 S0/0/0
2001:db8:1:2::1/64 N/A

R2
S0/0/1 10.10.1.9 255.255.255.252 N/A

R2 S0/0/1
2001:db8:1:3::1/64 N/A

R2 S0/0/1
fe80::2 N/A

R3 G0/0 10.10.1.17 255.255.255.240 N/A

R3 G0/0
2001:db8:1:4::1/64 N/A

R3
S0/0/1 10.10.1.10 255.255.255.252 N/A

R3 S0/0/1
2001:db8:1:3::2/64 N/A

R3 S0/0/1
fe80::3 N/A

PC1 NIC blank blank blank

NIC
PC1 blank blank

PC2 NIC blank blank blank

NIC
PC2 blank blank

Objectives
Part 1: Complete the Addressing Table Documentation
Part 2: Test Connectivity Using Ping
Part 3: Discover the Path by Tracing the Route

Background
Dual-stack allows IPv4 and IPv6 to coexist on the same network. In this activity, you will investigate a dual -
stack implementation including documenting the IPv4 and IPv6 configuration for end devices, testing
connectivity for both IPv4 and IPv6 using ping, and tracing the path from end to end for IPv4 and
IPv6.Complete the Addressing Table Documentation

© 2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 3 www.netacad.com
Packet Tracer - Verify IPv4 and IPv6 Addressing

Step 1: Use ipconfig to verify IPv4 addressing.


a. Click PC1 and open the Command Prompt.
b. Enter the ipconfig /all command to collect the IPv4 information. Fill-in the Addressing Table with the
IPv4 address, subnet mask, and default gateway.
c. Click PC2 and open the Command Prompt.
d. Enter the ipconfig /all command to collect the IPv4 information. Fill-in the Addressing Table with the
IPv4 address, subnet mask, and default gateway.

Step 2: Use ipv6config to verify IPv6 addressing.


a. On PC1, enter the ipv6config /all command to collect the IPv6 information. Fill-in the Addressing Table
with the IPv6 address, subnet prefix, and default gateway.
b. On PC2, enter the ipv6config /all command to collect the IPv6 information. Fill-in the Addressing Table
with the IPv6 address, subnet prefix, and default gateway.

Part 2: Test Connectivity Using Ping


Step 1: Use ping to verify IPv4 connectivity.
a. From PC1, ping the IPv4 address for PC2.
Question:

Was the result successful?


Type your answers here.
b. From PC2, ping the IPv4 address for PC1.
Question:

Was the result successful?


Type your answers here.

Step 2: Use ping to verify IPv6 connectivity.


a. From PC1, ping the IPv6 address for PC2.
Question:

Was the result successful?


Type your answers here.
From PC2, ping the IPv6 address of PC1.
Question:

Was the result successful?


Type your answers here.

Part 3: Discover the Path by Tracing the Route


Step 1: Use tracert to discover the IPv4 path.
a. From PC1, trace the route to PC2.
PC> tracert 10.10.1.20
Questions:

What addresses were encountered along the path?


Type your answers here.
With which interfaces are the four addresses associated
Type your answers here.
b. From PC2, trace the route to PC1.

© 2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 3 www.netacad.com
Packet Tracer - Verify IPv4 and IPv6 Addressing

Questions:

What addresses were encountered along the path?


Type your answers here.
With which interfaces are the four addresses associated?
Type your answers here.

Step 2: Use tracert to discover the IPv6 path.


a. From PC1, trace the route to the IPv6 address for PC2.
PC> tracert 2001:db8:1:4::a
Questions:

What addresses were encountered along the path?


Type your answers here.
With which interfaces are the four addresses associated?
Type your answers here.
b. From PC2, trace the route to the IPv6 address for PC1.
Questions:

What addresses were encountered along the path?


Type your answers here.
With which interfaces are the four addresses associated?
Type your answers here.
End of document

© 2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 3 of 3 www.netacad.com

You might also like