Scribd
Upload
21 views11 pages

Lab Module # 6 CAD & Modeling Create Following Part in Solidworks and Calculate Mass Properties

The document provides 18 steps to create a complex 3D part in Solidworks, including sketches of various shapes to extrude, cut, or convert into other features. The part involves creating a box-like base shape with cut-outs and holes of various sizes, then adding additional cut-outs and circular protrusions. The final step is to calculate the mass properties of the part if it were made from copper.

Uploaded by

ASAD ULLAH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
21 views11 pages

Lab Module # 6 CAD & Modeling Create Following Part in Solidworks and Calculate Mass Properties

The document provides 18 steps to create a complex 3D part in Solidworks, including sketches of various shapes to extrude, cut, or convert into other features. The part involves creating a box-like base shape with cut-outs and holes of various sizes, then adding additional cut-outs and circular protrusions. The final step is to calculate the mass properties of the part if it were made from copper.

Uploaded by

ASAD ULLAH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

Lab Module # 6

CAD & Modeling


Create following part in solidworks and calculate mass properties

Step 1
2. At back of box create following

3. Extrude cut upto 42 mm.


4. Create three circles as shown
5. extrude them as per 13 mm and 8 mm respectively as shown
6. create circle as shown 35 mm height and 50 mm dia
7. extrude cut through all

8. extrude cut remaining portion as shown below with the help of convert entities

9. sketch the following


10. Extrude cut uto 20 mm

11. create following sketch


12. extrude cut upto 9mm

13. sketch circle as shown and extrude cut


14. sketch as shown

15. make cut as shown

16 sketch as shown
17. Sketch as shown

18. Calculate mass properties for copper.

You might also like