Annex to declaration of accreditation (scope of accreditation)

Normative document: EN ISO/IEC 17025:2005

Registration number: K 161

of EuroLoop Calibrations B.V.

This annex is valid from: 04-12-2019 to 30-11-2020 Replaces annex dated: 24-04-2019

Location(s) where activities are performed under accreditation

Head Office

Petroleumweg 36
3196 KD
Vondelingenplaat Rotterdam
The Netherlands

Location Abbreviation/ location code

Petroleumweg 36 RDM
3196 KD
Vondelingenplaat Rotterdam
The Netherlands

Atoomweg 50 UTR
3542 AB
Utrecht
The Netherlands

HCS Measured Range CMC1 Remarks Location

code quantity,
Instrument,
Measure
FG 1 0 Gas Flow RDM
FG 1 1 Gas flow rate Volume flow rate [m³/h] at RDM
actual conditions
Mass flow rate [kg/h]

FG 1 2 Flow transducers Gasmeters RDM

This annex has been approved by the Board of the

Dutch Accreditation Council, on its behalf,

J.A.W.M. de Haas

1
Calibration and Measurement Capability (CMC): Demonstrated measurement uncertainty, with coverage probability of 95%, in a given measurement point or measurement range.
Measurement uncertainty, U, is calculated according to EA-4/02 "Evaluation of the Uncertainty of Measurement in Calibration".
Dutch Accreditation Council RvA Page 1 of 3
Annex to declaration of accreditation (scope of accreditation)
Normative document: EN ISO/IEC 17025:2005
Registration number: K 161

of EuroLoop Calibrations B.V.

This annex is valid from: 04-12-2019 to 30-11-2020 Replaces annex dated: 24-04-2019

HCS Measured Range CMC1 Remarks Location

code quantity,
Instrument,
Measure

VG 1 0 Volume of flowing Unlimited volume [m³] RDM

gases Unlimited mass [kg]

20 – 30000 m³/h 0,16% – 0,21% Pressure range (4,9 – 6,3)

MPa absolute pressure Pa

30 – 250 m³/h 0,17% – 0,28% Pressure range (0,9 – 4,9)

MPa absolute pressure Pa

251 – 30000 m³/h 0,17% – 0,24% Pressure range (0,9 – 4,9)

MPa absolute pressure Pa

200 – 1,7·104 kg/h 0,20% – 0,30% Pressure range (0,9 – 6,3)

MPa absolute pressure Pa

1,7·104 – 1,5·105 kg/h 0,20% – 0,26% Pressure range (0,9 – 6,3)

MPa absolute pressure Pa

1,5·105 – 1,6·106 kg/h 0,18% – 0,25% Pressure range (0,9 – 6,3)

MPa absolute pressure Pa

FG 1 2 Flow transducers < 1200 m/s 0,12% Speed of sound calibration RDM
of ultrasonic gas meter

Comparison of speed of
sound with equation of
state at
(0,1 – 70) MPa absolute
pressure
Natural gas, nitrogen, air

FG 1 0 Gas Flow On-site RDM

FG 1 1 Gas flow rate Volume flow rate [m³/h] at RDM

actual conditions

Dutch Accreditation Council RvA Page 2 of 3

Annex to declaration of accreditation (scope of accreditation)
Normative document: EN ISO/IEC 17025:2005
Registration number: K 161

of EuroLoop Calibrations B.V.

This annex is valid from: 04-12-2019 to 30-11-2020 Replaces annex dated: 24-04-2019

HCS Measured Range CMC1 Remarks Location

code quantity,
Instrument,
Measure

FG 1 2 Flow transducers Gasmeters and Dp RDM

devices

VG 1 0 Volume of flowing Unlimited volume [m³] UTR

gases

5 – 10000 m3/h 0,19% – 0,26% Pressure Range UTR

(0,85 – 0,95) MPa
absolute pressure

FL 1 0 Flow of liquids RDM

FL 1 1 Liquid flow rate Volume flow rate [m³/h] at RDM

actual conditions Mass
flow rate [kg/h]

FL 1 2 Flow transducers Liquid flowmeters and Dp RDM

devices

VL 1 0 Volume of flowing Unlimited volume [m³] RDM

liquids Unlimited mass [kg]

10 – 1200 m³/h 0,02% piston prover Liquids 1 - 600 mm²/s RDM

0,06% master meter kinematic viscosity
Maximum back pressure
8,5·10³ – 840·10³ kg/h 0,04% piston prover 1 MPa gauge
0,07% master meter

30 – 5000 m³/h 0,02% piston prover Liquids 1 - 600 mm²/s RDM

kinematic viscosity
70 – 5000 m³/h 0,06% master meter Maximum back pressure
1 MPa gauge
25,5·10³ – 3500·10³ kg/h 0,04% piston prover

59,5·10³ – 3500·10³ kg/h 0,07% master meter

Dutch Accreditation Council RvA Page 3 of 3