Here is the list of specific commands usable by all users:

- cpu_ready : <description to be filled>

- listtool : list of specific commands
- mnt4615 : A4615 maintenance tool
- rst4615 : reset A4615 VMU
- scpu : send message to CPU
- simdeport : Equipment replacement or visualisation
- simtrace : Redirection of messages from the cpu to a coupler
- tcyc : all cyclical test activation

Here is the list of specific commands usable by mtcl and mtch:

- acdhtml : Make html file for acd
- acdsup : Display acd configuration
- acrlist : Send a message to the associated node and wait for the answer
- actdbg : active traces for debug
- agacd : Display agent parameters
- agfsb : Display agent parameters for forseeable wait
- alarmrel : alarm relay:change state, incidents, info
- antdiv : correct antenna diversity field in DB and remanents
- attag : List of attached agent in a processing group
- aux4600 : Q23 detector state of a 4600 rack
- aux5400 : Q23 detector state of a 5400 rack
- bascul : switch over on the twin CPU
- bbc2stat : Statistics on BBC2 boards
- call_ident : data of busy trunk and it's peer
- callbstat : internal datas of call back service
- calledfilt : List of called filtering parameter
- callprof : call profile
- ccdcom : Display ccd application number
- ccdn : CCDn Routage
- ccstat : call completion internal datas
- cfnstat : Display meet me conference structure
- cmdcpl : toolbox for IP boards
- compvisu : compression tool
- config : all coupler's status
- config_gsm : GSM notification configuration
- configold : coupler's status before last save of ops files
- cplalrm : alarms of one board
- cplstat : one coupler's datas
- cplton : couplers broadcasting tonas
- csta : Display interactiv queueing table
- csta_data : CSTA data
- cstabuf : CSTA buffer
- cstacheck : CSTA Check List
- cstainfo : CSTA remanents
- cstatrk : Display csta monitoring of trunk group
- ctxacd : Display dialog context data
- ctxretry : Display dialog contexts in wait for ack list
- ctxsendmsg : Send message between contexts
- ctxstate : Change the dialog context state
- datastat : <description to be filled>
- dectarea : Dect localization area display
- dectclean : dect-roaming data clean
- decteasy : Easy Dect installation tool
- dectinfo : Display of Dect global information
- dectinstoff : Dect installation : end
- dectinston : Dect installation : begin
- dectipuio : translate ABPQMCDU to IPUI_O
- dectisoloff : Dect coupler isolation : end
- dectisolon : Dect coupler isolation : begin
- dectlocreq : dect suggest locate_req
- dectrm : Remove handset IPUI
- dectsets : List of Dect handsets configured
- dectview : Dect status
- demi_com : demi_com datas
- demi_com_fr : description of a frame relay half-com
- demi_com_sup : description of a support channel frame relay
- didtest : test datas of did table
- distrirule : Display parameters of a distribution rule
- domstat : Display Domain Info
- downstat : download and couplers
- dspstat : DSP status on coupler
- dump_bbc2 : all about BBC2 board
- edcustom : Priority, TIR and conference
- emerlist : Emergency list data
- entitystat : <description to be filled>
- eqstat : equipment datas
- excvisu : displays systems exceptions (backtraces)
- getnode : node number for prompt
- gfu : GFU
- grpopestat : <description to be filled>
- help : informations on tools
- hybvisu : display hybrid accesses information
- iaa : Display Integrated Auto Attendant information
- ibsstat : list of all ibs in service
- inccpt : <description to be filled>
- increset : reset of incidents
- infocs : synchronisation datas
- inserv : in-service coupler
- int155stat : INT155 connexions
- intint : INT couplers
- intipstat : Int Ip Information
- ippsim : PCMM2 Simulation Mode
- ippstat : Ip Phone visualisation
- lanpbxbuild : lanpbx.cfg tool for Ip tftp configuration
- liostat : statistics on LIO boards
- list : set of pretty listing tools for sets
- list_catjr : list of all trunk categories with their type
- list_faisc : list of all trunkgroups with their type and prefix number
- listag : Display dynamic state of affected agent
- listdnd : do not disturb sets
- listerm : list of terminals
- listfwd : forwarded terminals
- listibs : list of ibs
- listincall : Gives established communication
- listloc : list of locked sets
- listout : isolated resources
- listrpn : list of all rpn
- lkvisu : list of all links node by node
- logag : List of affected agent in a processing group
- lookars : rout list configuration
- lookgram : <description to be filled>
- looknpd : Numbering Plan Descriptor configuration
- looknumin : Numbering plan descriptor on arrival
- lookvpn : VPN overflow config.: display and control
- loop : forces connexion PCM on jonct
- ltcyc : cyclic tests datas
- modconf : Modular conference circuit configuration
- msglevel : Display information elements of dialog context messages
- neqt_log : datas of virtual phone sets
- nomadic : nomadic sets maintenance tool
- ocupjonc : <description to be filled>
- opstat : operators status
- opsup : real-time attendant supervisor
- outserv : out-of-service coupler
- param_dyn : Dump of a coupler dynamic parameters
- parm5400 : time-out values of a 5400 rack
- patchus : modify US software
- pbxstat : datas of pbx groups
- pgacd : Display processing group data
- pgctx : Display dialog context of a remote pg
- pgwq : Display call selection params of distribution dir
- pgwqlist : Display queue list of a processing group
- pilacd : Display pilot data
- pildstctx : Display pilot destination contexts
- pilotrule : Display parameters of a pilot rule
- pilstat : Display pilot stat data
- pingctx : Send a message to the associated ctx and wait for the answer
- piwq : Display parameters of a routing direction
- piwqlist : Display queue list of a pilot
- piwqpg : Display queue and processing group list of pilot
- poorars : Display poor signalling route ARS data
- postlog : with logical number:phone sets datas
- public_tsl : public translator
- qslac_z2 : Dump of a Z2 coupler qslac data
- r2_5400 : R2 detector state of a 5400 rack
- razam : Reset the waiting queue
- razlimit : Reset busy IT counter
- razpil : razpil
- raztrkacd : Reset trunk group ACD call counter
- razwq : razwq
- readbbox : context before backtrace (black box)
- readhead : current version of one file
- readkey : read informations in keys of digital sets
- reinit : reset of terminal
- rem_gfu : Remanents GFU
- represent : representation of connexion
- rsiwtdtime : RSI forseeable waiting time announcement table
- rstcpl : reset of coupler
- rstdspcpl : DSP or embedded function reset
- rsthyb : reset of hybrid links
- rstio1 : reset of IO1
- rtpstat : statistics RTP on IP boards
- rule : Display dynamic state of rules (pilot and distribution)
- setCCE : Set on|off CCE Client
- setCCW : Set on|off CCW Client
- setdate : update date on numeric terminals
- simulacc : artere locale simulation
- sosm_cpl : SOSM cpl
- ss7stat : Gives signalling connexions with SS7 Network
- statenode : Display state of each node in the network
- stopdbg : stop traces for debug
- suitlog : affichage des donnees hotel
- supgpbx : GPBX supervisor
- ta_prifa : dialling prefixes for trunks
- tab__aux : cadences of tonalities
- tab_aux_us : detectors back US
- tab_fr_crct : <description to be filled>
- tab_it_spyd : BRA/PRA/UA couplers
- tab_ua : terminals on UA couplers
- tab_ua_typ : datas of UA terminals
- tabag : List of agent
- tabcallprof : call profile table
- tabctx : Display dialog contexts list
- tabeqt : with coupler index:coupler equipment number
- tabnodectx : Display dialog contexts list associated to node
- tabpg : List of processing groups
- tabpil : List of pilots
- tabpilstat : List of pilot stat
- tabranfilt : List of caller filtering parameter
- tabrasfo : callback table for trunks
- tabskill : skill
- tabskilldom : skill domain
- tabtemp : table of delays
- tabwq : List of queues
- tabwtd : Display Waiting Time Dependant table
- taux : cyclical test on detectors
- tb_acces_t0 : T0 access datas
- tcalledfilt : List of called filtering number
- tcpl : cyclical test on coupler
- terminfo : links on demi-com
- termstat : terminal status
- traddata : internal datas of data phone sets
- tradeq : with equipment number:terminals
- tradna : with directory number:terminals
- tradph : with physical address:terminals
- traffic : dump counters of coupler msg
- transcod : transcod special chars of string files
- transisvpn : <description to be filled>
- trkbusy : display TG busy barometer
- trklimit : Display trunk group table limitation
- trkstat : trunk status
- trkvisu : trunk group
- trschain : Dump of transit facility/notification area
- ts4600 : time-slot state of a 4600 rack
- ts5400 : time-slot state of a 5400 rack
- tsint : it status between two int
- tsio1 : it status on IO1 card
- tsus : it status US-USCG, IR-IRC
- twin : duplication of main CPU
- usedentity : Display elements which used and entity
- usstat : datas of US shelves
- utadown : downloaded code on uta boxes
- varcpl_rout : coupler datas with physical position
- vgclass : display of VG class for message
- vgdigit : VG CCDn Digit Announcement
- vgemis : broadcasted voice-guides
- vgfile : Display Downloadable Vocal Guides file names
- vgmespos : VG Message Position
- vgmulti : voice guide and multi-language
- vgmultilang : Display multilanguage voice guide
- vgstart : start voice guides
- vgstat : vocal guides status on coupler
- vgton : tonalities and voice-guides
- vgtonrepl : tonas replacing voice guides
- virwq : Display virtual queue
- visu_ardyn : display dynamic link accesses information
- visu_catjr : trunk categories
- vmail : sympac access
- voipstat : statistics on LIOe boards
- vp_pos_table : <description to be filled>
- wherevg : location of a voice guide or a voice message
- wired_or : ports access before bascul
- wq : <description to be filled>
- wqacd : Display queue data
- wqfsb : forseeable wait
- wqpg : Display resource selection params of distribution dir
- wqpglist : Display processing group list of a queue
- wqpilist : Display pilot list of a queue
- x25visu : datas of x25, cluster, acces point
- zacd : Display specific acd dynamic data for trunk
- zccdn : Display specific acd dynamic data for trunk
- zdata : datas of data terminals
- zdjonct : jonctor datas
- zdmict0 : with equipment nb:terminal type T0
- zdmict2 : with equipment nb:terminal type T2
- zdpost : with equipment nb:other terminals
- zoai : datas of oai terminals

Here is the list of specific commands only usable by mtch:

- abcchain : check notification and facilities chainage
- asn1chain : check asn1 chainage
- autor2 : internal datas of R2
- cdtstat : <description to be filled>
- cnx : <description to be filled>
- cnx_eqt : for agreement:forces connexion
- code_debug : active code of debug
- cpl_online : online debug of standard couplers
- debug_cpl : active debug in UA coupler
- dectdbg : Debug of Dect handset
- dectmaster : Set Dect Frame Sync master coupler
- dectnwkdbg : Debug of Dect network
- dectrestart : Restart dect application
- distristat : <description to be filled>
- helpacd : Update acdv2 data station
- info_he : <description to be filled>
- ini_tab_us : reinitialize it US/USCVG
- limitstat : maximum values of system
- listen : timeslot connexion
- locefdis : <description to be filled>
- mnt_alr : alarm counter on jonctor
- mntahlip : ahltcp maintenance tool
- mod_vg_start : <description to be filled>
- pcotstat : <description to be filled>
- rack_table : informations associated to one crystal
- readfile : Display or update agent order number data file
- rzmfr : <description to be filled>
- rzqueue : <description to be filled>
- scpl : send message to coupler
- sendall : <description to be filled>
- sigtrace : Signalling trace
- smartms : active traces in mailsys
- stringref : Display string references on Tiny
- substires : <description to be filled>
- suuchain : internal datas for SUU
- synchro : force synchronization
- t2chain : check mess_t2 chainage
- tabopcstat : <description to be filled>
- tbr : Changing DECT behaviour to desired TBR
- tracerus : trace events on US
- ua_version : UA version of one terminal
- zguide : <description to be filled>
- zuastat : list all non-HE subdevices