Vesmaco

2 Story 5-6 Timeline 7-8 Projects

9-10 Services 11-12 Manufacture 13-14 Materials

Products

15 Intro 16-17 Storage tanks and vessels 18-19 Pumping and lifting stations

20-21 Stormwater clearing systems 22 Sludge traps LM-series 23 Fuel/oil separators ENP-series

24 Active carbon filters ASP-series 25 Compact stormwater treating 26 Grease separators REN-series
system TRIPLEX-series

27 Wells, distribution chambers 28-29 Custom-made products

and sampling shafts and production outsourcing
Vesmaco

3
 Vesmaco

Story
Vesmaco Group was set up on June 1, 2000, in in manufacturing and realization of similar
Tallinn, Estonia, as Vesmaco — manufacturer products all over Russia and the CIS countries.
of glass fiber reinforced plastics (GFRP, GRP,
FRP) storage tanks and vessels. From the very Nowadays Vesmaco Group is a family-managed
beginning, the company aims at manufacturing group of private companies in Baltics and Russia
storage tanks for various liquids and acids, specialised on glass fiber reinforced plastics
sewage and wastewater clearing systems, (GFRP, GRP, FRP) products design, engineering
pumping and lifting stations. and manufacture steel products and machinery,
pumps and pipe fitting, water purification and
In 2003, Plast Group company was set up in preparation systems.
St. Petersburg, Russia. The company specializes

4
 Vesmaco

Timeline 2005
Vesmaco became an official member
of Estonian Chamber of Commercial
and Industry.

2003 www.koda.ee

Plast Group was founded

in St. Petersburg, Russia.

2007
2005
Vesmaco was AA-rated by
Vesmaco sucessfully Krediidiinfo in co-operation
2000 passed ISO 9001 with Experian.
certification by
Vesmaco was set up The rating of the former is company
Det Norske Veritas. assessment, which basically is a
on June 1, 2000, cimilative grade based on economic,
in Tallinn, Estonia. financial, and payment behaviour.

5
 Vesmaco

2011
New filament winding machines for
3000–3200 mm diameter tanks
manufacturing were designed and
produced for Plast Group and Vesmaco.

2007 2015
First in-house filament winding machine for First in-house modular
600–2400 mm diameter tanks manufacturing vertical storage tanks
was designed and produced. Later that year system up to 500 m³ was
system was installed in Vesmaco. designed in Plast Group.

2008 2013
Plast Group opened second
Filament winding
production site in
machine was installed
St. Petersburg, Russia with
in Plast Group.
filament winding machine for
3200–3700 mm diameter
tanks manufacturing.

6
 Vesmaco

Projects
K-Rauta, “Lenta” and “Karusel” hyper-markets, Belarusian nuclear power plant, Belarus Ämari Air base, Harjumaa, Estonia
Russia Pumping stations Pumping stations, fire protection water storage tanks,
Pumping stations, fire protection water storage tanks and stormwater clearing systems
Shell petrol stations, Russia
stormwater clearing system
Pumping stations and fuel storage tanks Tapa NATO barracks, Tapa, Estonia
Alkon factory, Veliky Novgorod, Russia Pumping stations, fire protection water storage tanks,
Sheremetyevo International Airport, stormwater clearing systems
Pumping stations and stormwater clearing system
Khimki, Moscow Region, Russia
Helkama factory, Vyborg, Russia Mercedes-Benz Klaipeda, Lithuania
Stormwater clearing system and grease separators
Fire protection water storage tanks
Pumping station and stormwater clearing system
Russian Railways, Desiro Depo Station,
Primorsk seaport, the Leningrad Region, Russia Vilnius inner ring road, Vilnius, Lithuania
Moscow, Russia
Pumping stations
Customs pumping stations for seawater Pumping stations

Lennart Meri Tallinn Airport, Tallinn, Estonia Šiauliai International Airport,

Gazprom Mountain Tourist Center,
Šiauliai, Lithuania
Pumping stations Sochi, Russia
Fire protection water storage tanks
Stormwater clearing system
Paldiski seaport, Paldiski, Estonia
Western High-Speed Diameter,
Pumping stations Radisson Blu Resort & Congress Centre,
St. Petersburg, Russia
Jõgeva waste-disposal, Jõgeva Region, Estonia Sochi, Russia
Storage tanks for salt brines
Pumping stations
Pumping station

Saku Suurhall Arena, Tallinn, Estonia Volkswagen factory, Kaluga, Russia

Stormwater clearing system
Stormwater clearing system

Piterland waterpark St. Petersburg, Russia Jõhvi regional substation, Jõhvi, Estonia
Stormwater clearing system
Fuel/oil and grease separators

7
 Vesmaco

Stormwater pumping station, Vilnius inner ring road

Vilnius, Lithuania

2,500 10,000 Stormwater pumping stations, Russian Railways, Desiro Depo Station
clients products Moscow, Russia

8
 Vesmaco

Services
Vesmaco provides a full range of accom- Consulting
panying services – consulting, design and
engineering, installation supervision and
commissioning, delivery and servicing. GRP products design, engineering and
manufacture

Storage tanks, sewage and wastewater

treatment systems design and manufacture

GRP products production outsourcing

Delivery

Installation supervision

Detailed information about our After-sales service

services is published on a website
www.vesmaco.ee
Personnel training

9
 Vesmaco

110 m³ storage tank, PROMO Cash&Carry

Kaunas, Lithuania

10
 Vesmaco

Manufacture
2 production lines equipped with filament winding machines
for 600–3000 mm diameter tanks manufacturing.

All products for Europe are produced in Maardu, Reichhold etc.) are used in the production
Estonia, at the production site with an area process. The obtained materials are regularly
of 1,500 m². High quality raw materials and tested. All products are subject to industrial
components by well-known European and quality control as well as comply with European
American manufacturers (Ashland, Alstrom, standards and CE marking requirements.

11
 Vesmaco

Vesmaco production site

12
 Vesmaco

2
4

2
4

Materials
2
3
2
3
2
1
Our products are made of glass fiber reinforced plastics (GFRP, GRP, FRP)
implementing the filament winding, spray and hand layup methods.

Shell wall structure*

1 Inner corrosion barrier layer 3 Reinforcing layer 5 External protective layer
resin-rich fiberglass fiberglass multidirectional mats topcoat

2 Structural laminate 4 Thermal insulation

fiberglass roving, resin

*Schematic illustration of wall construction. Depending on product intended use,

installation conditions and external forces various fibers, resins, additions, production
methods, layer design and wall thickness might be used.

13
Vesmaco

14
 Products

Products
97% 94%
B2B clients return clients

In the course of 16 years, the company has produced 10,000 products

for 2,500 clients in Estonia, Latvia, Lithuania, Finland, Sweden,
Norway, Russia, Middle East, and the CIS countries.

600–3700 mm

15
 Products

Storage tanks
and vessels

Non-pressure storage tanks and vessels for fire Horizontal and vertical storage tanks and vessels
protection and technical water, sewage and for underground on aboveground installation.
wastewater, petrol and chemicals, potable water
and mixtures.

Total volume 2–500 m³

Designed for long-term performance
and tested in accordance with Up to 25 years warranty
EN 976 and EN 13121.

16
 Products

Storage tanks for potable water

Inčukalns, Latvia

Vertical storage tanks for salt brines, Storage tanks for potable water
Western High-Speed Diameter, St. Petersburg, Russia Inčukalns, Latvia

Fire protection water storage tanks, Tondiraba Ice Hall

Tallinn, Estonia

17
 Products

Pumping and lifting

stations

Wide range of ready-to-use pumping and lifting

stations in vertical and horizontal bodies.

Factory installed and tested pumps, pedestals,

guide rails, valves and pipework.

Designed for long-term performance

and tested in accordance with
EN 12050 and EN 976.

800–3700 mm

18
 Products

Stormwater pumping station, Vilnius inner ring road

Vilnius, Lithuania

Stormwater pumping stations, Russian Railways, Stormwater pumping stations, Russian Railways,
Desiro Depo Station, Moscow, Russia Desiro Depo Station, Moscow, Russia

19
 Products

Stormwater
clearing
systems

Stormwater clearing systems are used for phased

treatment of natural rainfall coming from various
buildings and areas.

Designed for long-term performance

and tested in accordance with EN 858
and EN 976.

Nominal sizes (NS) 2–500 l/s

20
 Products

Stormwater clearing system, K-Rauta

Moscow, Russia

Stormwater clearing system, Gazprom Mountain Tourist Center Stormwater clearing system, Gazprom Mountain Tourist Center
Sochi, Russia Sochi, Russia

21
 Products

Sludge traps
LM-series

Sludge traps treat surface water run-offs to

remove high quantities of sludge, trash and silt
from washing plants for site and farm vehicle,
trucks wash places and automatic car washes.

Designed for long-term performance

and tested in accordance with EN 858
and EN 976.

Total volume 2–150 m³

22
 Products

Fuel/oil separators
ENP-series

Fuel/oil separators treat surface water run-offs to

remove hydrocarbons, sludge and silt.

Developed to serve motorways, car parks and

petrol stations, goods vehicle parking, railroad
depot, industrial and commercial areas.

Designed for long-term performance

and tested in accordance with EN 858
and EN 976.

Nominal sizes (NS) 2–500 l/s

23
 Products

Active carbon filters

ASP-series

Active carbon filters are used in the final stage

of treatment to neutralise residual light liquids
and suspended particles in the pre-treated
stormwater.

Designed for long-term performance

and tested in accordance with EN 976.

24
 Products

Compact stormwater
treating system
TRIPLEX-series

TRIPLEX treat surface water run-offs to remove

hydrocarbons, sludge and silt in the case of
the constantly high demand for stormwater
treatment.

TRIPLEX is combining sludge trap, fuel/oil

separator, and active carbon filter in one housing.

Recommended for systems up to 30 l/s.

Designed for long-term performance

and tested in accordance with EN 858
and EN 976.

25
 Products

Grease separators
REN-series

Grease separators treat wastewater from

commercial kitchens, butcher’s shops, abattoirs,
meat and sausage factories to remove greases
and oils of vegetable and animal origin.

Designed for long-term performance

and tested in accordance with EN 1852.

Nominal sizes (NS) 2–500 l/s

26
 Products

Wells, distribution
chambers and sampling
shafts

Wide range of technical wells with flow meter

and closing valves, distirbution chambers, flow
regulation and sampling shafts are available
where applicable.

600–3700 mm

27
 Products

Custom-made products
and production
outsourcing

Consulting, design, engineering and manufac-

ture, patent and certification services.

Turn-key solutions.

28
Products

29
1.1 • 20 December, 2016

OÜ Vesmaco
Katusepapi 6
11412 Tallinn
Estonia
Tel. (+372) 6-418-550
[email protected]
www.vesmaco.ee