Scribd Logo
Upload

Welcome to Scribd!

  • 55 views

    ElectraGuard Specifications - 2

    Uploaded by

    Yavuz Solmaz
    ElectraGuard ESD epoxy is a conductive floor coating originally designed in 1992 for munitions applications. It provides a seamless floor surface that removes dust and contaminants more effectively than tile alternatives. The two-part epoxy system offers a 10-year lifespan and can be applied to various floor substrates. It meets stringent standards for static control and ESD protection in mission critical environments. When tested, the epoxy generates very low static charges and decays rapidly, safely meeting all requirements for use in electronics manufacturing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ElectraGuard Specifications - 2

    Uploaded by

    Yavuz Solmaz
    55 views5 pages
    ElectraGuard ESD epoxy is a conductive floor coating originally designed in 1992 for munitions applications. It provides a seamless floor surface that removes dust and contaminants more effectively than tile alternatives. The two-part epoxy system offers a 10-year lifespan and can be applied to various floor substrates. It meets stringent standards for static control and ESD protection in mission critical environments. When tested, the epoxy generates very low static charges and decays rapidly, safely meeting all requirements for use in electronics manufacturing.

    Original Title

    ElectraGuard Specifications_2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    ElectraGuard ESD epoxy is a conductive floor coating originally designed in 1992 for munitions applications. It provides a seamless floor surface that removes dust and contaminants more effectively than tile alternatives. The two-part epoxy system offers a 10-year lifespan and can be applied to various floor substrates. It meets stringent standards for static control and ESD protection in mission critical environments. When tested, the epoxy generates very low static charges and decays rapidly, safely meeting all requirements for use in electronics manufacturing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    55 views5 pages

    ElectraGuard Specifications - 2

    Uploaded by

    Yavuz Solmaz
    ElectraGuard ESD epoxy is a conductive floor coating originally designed in 1992 for munitions applications. It provides a seamless floor surface that removes dust and contaminants more effectively than tile alternatives. The two-part epoxy system offers a 10-year lifespan and can be applied to various floor substrates. It meets stringent standards for static control and ESD protection in mission critical environments. When tested, the epoxy generates very low static charges and decays rapidly, safely meeting all requirements for use in electronics manufacturing.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    ELECTRAGUARD ESD EPOXY SPECIFICATIONS

    Mission Critical Conductive Floor Paint


    PRODUCT HISTORY AND
    OVERVIEW: Our ElectraGuard ESD
    Epoxy was originally designed for use
    in providing static control for munitions
    applications in 1992. Over the years it
    has been further refined with patented
    advancements in structural integrity,
    conductivity and chemical resistance.
    ElectraGuard is a proven performer at
    a realistic price. ElectraGuard is a true
    two part epoxy. Unlike mere latex or
    one part epoxy floor paints that may last a year or two, our ElectraGuard High Gloss System
    provides outstanding longevity and a ten year life expectancy. The system is well suited for
    application on a variety of flooring substrates including concrete, existing well bonded VCT,
    standard and antistatic vinyl tiles, steel, vinyl sheet goods and wooden subfloors. ElectraGuard
    may be applied with a roller or with an airless paint sprayer making it an excellent choice for use
    on walls, ceilings, bench tops, equipment racks and more.

    ElectraGuard ESD Epoxy meets or exceeds the latest most stringent standards for Mission
    Critical Static Control. And, unlike ESD tiles, ElectraGuard is seamless for the optimum removal
    of dust and powder contaminants. Tiles rely on a random pattern of conductive elements
    interspersed in an insulative vinyl and a conductive adhesive to bridge the gaps between the
    tiles. Unlike ESD tiles our ElectraGuard features an amorphous electrical conductivity for 100%
    conductive contact with footwear and superior static control performance. This same amorphous
    conductivity makes it an excellent choice for shielding as well as static control. Tiles become
    slippery when wet where as ElectraGuard features inherent anti-slip properties. The electrical
    conductivity may be tailored for compliance to the recent DOD 4145.26-M standards. Leave "as
    is" for a low glare matte finish or top coat with ElectraThane, ElectraGlaze or ElectraSheen
    Sapphire for a diamond like shine, ultimate wear resistance and an ESD floor that consistently
    meets the latest ANSI ESD S 20.20-2007 / 2014 standards without fail.

    UNITED Static Control Products Inc. Colorado City, CO USA Telephone: 719 676 3928 Page 1
    ELECTRAGUARD ESD EPOXY SPECIFICATIONS
    Mission Critical Conductive Floor Paint

    PHYSICAL PROPERTIES

    Gloss Unsealed: Matte Finish

    Gloss Sealed: 88 Min ASTM D1455-82

    Colors: Light Gray, Medium Gray, Black Ice, Beige, Emerald Green, Sky Blue

    Slip Resistance per ASTM-D2047-5: 0.62 minimum (excellent)

    Hardness: Shore 68

    Viscosity: 400 to 600

    Solvent: Alcohol, water-glycol ether

    Flash point: >212 deg. F

    Freeze / Thaw Stability: 0 - Do not freeze

    Dry time at standard air flow: 8 hours (dry to the touch). Open for traffic in 12

    Typical Coverage: 350 to square feet per gallon per coat

    Compressive strength over vinyl tiles: Modified ASTM F 9700-00, >2,500

    Compressive strength over concrete: DIN1691 equal to or greater than that of the concrete.

    Indentation impact resistance per ASTM F1914: DIN EN average of <5%, max 10%

    Abrasion resistance per ASTM D1044: SC10F wheel, 550 gm weight, cycles 10k, % loss 1.6

    Resistance to wear: DIN EN660-1, M

    Film thickness when dry: 1.1 mil per coat

    Warranty: Life time electrical properties, 5 years wear (see details for specifics)

    Resistance to chemicals: ASTM 925, DIN EN 423, slight change

    Resistance to heat: ASTM 1514 ∆<8 average., max, <∆E=2.0

    Resistance to light: ASTM 1515 ∆<8 average., max, <∆E=6.0

    Fire resistance: DIN 4102, B1

    Color fastness: ISO 105 BO2, >6

    Critical radiant flux: ASTM E648, NFPA 253, >1.08 w/cm2 (class 1 interior floor finish, NFPA code 101

    Shelf Life and Weight: 24 months, unopened at 70 deg F, +/- 10 degrees. Weight: 10 Pounds Per Gallon.

    Shipping: May be shipped Air Freight. Non Regulated, IEN 99-3A-3B, HTC 3209.90.0000

    UNITED Static Control Products Inc. Colorado City, CO USA Telephone: 719 676 3928 Page 2
    ELECTRAGUARD ESD EPOXY SPECIFICATIONS
    Mission Critical Conductive Floor Paint

    ELECTRICAL PROPERTIES UNSEALED


    ITEM STANDARD TEST METHOD UNSEALED
    ELECTRAGUARD

    Electrical Resistance, Surface ESD S 7.1 @ 100 V / 10 V, tested 12%rH and >1.0E04 <1.0E07
    to Surface (PTP) 45% rH

    Electrical Resistance Surface >1.0E04 <1.0E07


    to Ground (RTG)

    Electrostatic Propensity AATCC 134 With heel grounders <20 volts

    Static Decay Federal Test Method 101B Method 4046 at 15% <0.5 sec
    Relative Humidity

    Combination resistance of ANSI ESD S20.20-2014 97.1 <1.0E09 Ohms. PASS


    technician, heel grounders and
    flooring

    Does not exceed 100


    Tribogeneration ANSI ESD S20.20-2014, 97.2 / IEC 61340-4-5
    volts. (typical <10 volts
    +/- polarity)

    ElectraGuard High Velocity (unsealed)


    Color Test Method Results

    Medium and Light Gray DOD 4145-26-M, (March 13, 2008) tested at > 40 kV and <1 Meg Ohm.
    500 Volts, RTG/PTP

    Medium and Light Gray NFPA 484-2015, tested at 500 Volts, > 40 kV and <1 Meg Ohm.
    RTG/PTP
    Medium and Light Gray ASTM F-150, tested at 500 Volts, RTG / PTP > 40 kV and <1 Meg Ohm.
    Black Ice NFPA 484-2015, tested at 500 Volts, > 20 kV and <1 Meg Ohm.
    RTG/PTP
    Note: Resistance values may be easily adjusted upwards with an additional coat of ElectraThane to meet
    minimum DOD resistance levels for use in 240 volt applications

    UNITED Static Control Products Inc. Colorado City, CO USA Telephone: 719 676 3928 Page 3
    ELECTRAGUARD ESD EPOXY SPECIFICATIONS
    Mission Critical Conductive Floor Paint

    ELECTRICAL PROPERTIES SEALED


    Sealed with 2 coats of ElectraThane and One Coat of ElectraGlaze

    ITEM STANDARD TEST METHOD SEALED ELECTRAGUARD

    Electrical Resistance, Surface to ESD S 7.1 @ 100 V / 10 V >1.0E05 <1.0E07


    Surface (PTP) tested at 12% rH and 45%rH

    Electrical Resistance Surface to >1.0E05 <1.0E07


    Ground (RTG)

    Combination resistance of technician, ANSI ESD S20.20-2014, 97.1 <1.0E09 Ohms. PASS
    heel grounders and flooring

    Static Decay Federal Test Method 101B < .3 sec


    Method 4046 at 15%
    Relative Humidity

    Tribogeneration ANSI ESD S20.20-2014, 97.2 Does not exceed 100 volts. PASS

    Note: Resistance values may be adjusted upwards with additional coats of


    ElectraThane to >1.0E06 and <1.0E09 (static dissipative).

    UNITED Static Control Products Inc. Colorado City, CO USA Telephone: 719 676 3928 Page 4
    ELECTRAGUARD ESD EPOXY SPECIFICATIONS
    Mission Critical Conductive Floor Paint

    Typical Charge Generation


    Floor Materials and Footwear
    Charge Generation of Person in ESD Footwear
    Testing per ANSI/ESD STM97.2 / ESD TR53 Flooring Section
    Environmental Conditions: 38.7%rH, 78.9o F (avg.) Areas 1 through 5
    Devices used in this Testing: Monroe Charge Plate Analyzer, Oscilloscope, PC
    NOTE: Device output is 1/1,000th the actual charge of the plate
    Passing Range: Less than 100 Volts

    Maximum Negative Voltage: (-) 4.37 Maximum Positive Voltage: (+) 6.56
    Median Absolute Voltage: (+) 1.25 Average Absolute Voltages: (+) 1.17

    ElectraGuard is Proudly Made in the U.S.A.

    UNITED Static Control Products Inc. Colorado City, CO USA Telephone: 719 676 3928 Page 5

    You might also like