Shell Lubricants

OEM Approval
Listings
Designed to meet challenges

Title:My document
Created By:Ulf Rieper
Creation Date:05 September 2014
Document ID:000011224

CONFIDENTIAL
This booklet contains proprietary and confidential information of Shell Lubricants.
The information is intended for Shell internal and Shell affiliated companies and
distributors only. The unauthorized use or copying (photocopying, electronic, manual,
etc.) of any information contained herein is strictly prohibited.
Definitions

OEM Approved Written approval given by OEM as suitable for use in that application.

Endorsed OEM does not provide OEM approval or listing, however product has been successfully tested by the
OEM and/or Shell and meets the OEM’s published specifications in that application.
OEM Listed Listed by OEM in their lubricant for use in that application.

Customer Endorsed OEM does not provide OEM approval or listing, however product has been successfully tested by the
OEM and/or Shell and meets the OEM’s published specifications in that application
Self-Certification The OEM requires a product to meet either their own internal specification or an Industry Specification.
Shell usually sends a letter to the OEM stating that the particular Shell product meets required
specification.
OEM Re-Approved This is a re-approval based on the original documentation. Please use the original approval
documentation as well.

Information is current as of the creation date shown on the front cover of this document
OEM Index - Alphabetical Drum Industries 13
DS Technologie Werkzeugmaschinenbau GmbH 13
Eaton Corporation 13
Ebara 13

OEM Name Page Eirich GmbH & Co. K.G. 13

ABB 1 EMCO MAIER 13

Aichi Tokei Denki Co., Ltd. 1 Emerson 13

Aker Wirth GmbH (Aker Solutions) 1 Emerson Climate Technologies 15

Alfa Laval 1 Emerson Motor Technologies 15

Alfons Haar 1 Engel 15

Alzmetall 1 Enomoto Kogyo 15

Amandus Kahl GmbH 1 Enshu Limited 15

Andritz 1 Ernest Grob AG 15

Angelus 1 Falk Corporation 17

APV Baker 1 Ferromatik Milacron 17

Arburg GmbH 3 Fleissner GmbH 17

Aries Engineering Inc 3 Flowserve 17

ATA PLASTIC MACHINERY (GUANGZHOU) CO., LTD 3 FLSmidth Group 17

Avic Xian Aero-Engine (Group) Ltd. 3 Frank Mohn AS 17

Baotou Huiquan Rare Earth Industry(Group)Ltd 3 Fuji Machine Mfg. Co., Ltd. 17

Battenfeld 3 Fuji Seiki Machine Works Ltd. 17

Behringer Saws 3 Fuji Seisakusho Ltd. 17

Beijing Beizhong Steam Turbine Generator, Ltd 3 FuShun Excavator Corporation Ltd 19

Beijing Jingcheng New Energy Co., Ltd. 3 G. Siempelkamp GmbH & Co.KG 19

Benz & Hilgers GmbH 3 Gamesa Corporacion Tecnologica S.A. 19

Besser Company 3 GEA 19

Blackmer 5 Gebr. Pfeiffer AG 19

Blohm & Voss GmbH 5 Genie Industries 19

Bosch Rexroth 5 Goss International Corporation 19

Boving Fouress 7 Gottwald 19

CAE, Inc. 7 Guangdong Keda Dynamo-Electric Co Ltd 21

Capital Engineering & Research Incorporation Ltd 7 Hagglunds Drives AB 21

CarnaudMetalbox Engineering 7 Harburg-Freudenberger

Maschinenbau GmbH 21
Caterpillar Marine Power Systems 7 HAWE Hydraulik GmbH & Co KG 21
China First Heavy Industries 7 Hayward Gordon 21
China National ErZhong Group Co.(CNEG) 7 Hegenscheidt-MFD GmbH & Co. KG 21
Cincinnati Lamb 7 Herrenknecht AG 21
Citizen Machinery Co., Ltd. 9 Hine Group 21
Cockerill Maintenance & Ingenierie (CMI) Group 9 Hitachi Construction Machinery Co., Ltd. 21
Condux International 9 Hokushin Engineering 21
Cone Drive Operations 9 Homma Machinery Co., Ltd. 21
Cosmos Machinery 9 Horkos Corp. 21
Cotta Transmissions Company, LLC 9 Howa Machinery Ltd. 21
Daido Machinery Co., Ltd. 9 Huddig AB 21
Daimler AG 9 Husky Injection Molding 21
Dainichi Kinzoku Kogyo Co., Ltd. 9 Hydro Leduc L.P. 23
Dalian Huakai Machine Tool Co. , Ltd. 11 Ikegai Wado 23
Danfoss Bauer GmbH 11 International Construction Equipment, Inc. 23
Danieli & C. Officine Meccaniche S. p. A. 11 Japan Steel Works 23
Dean Smith and Grace Ltd 11 JBT Foodtech 23
Denison Hydraulics 11 JSC "Kirovsky mashzavod 1 Maya" 23
Dieffenbacher GmbH + Co. KG 11 JTEKT 23

I II
Kanzaki Kokyukoki Mgf 23 Perma Schmiersysteme 35
Karatsu Iron Works Ltd. 25 Petzholdt-Heidenauer Machinen und Anlagenbau International
GmbH 37
Karl Klink GmbH 25
POLYSIUS AG 37
Kashifuji Works Ltd. 25
REFORM Maschinenfabrik Adolf Rabenseifner GmbH & Co. KG 37
Kautex Maschinenbau GmbH 25
Reishauer AG 37
Kawaguchi Limited 25
Renk AG 37
KHS AG 25
Rexnord Industries, LLC 37
Kiremko Duurland B.V. 25
Robinson Industries, Inc. 37
Kitagawa Kogyo Co., Ltd. 25
Rollstar AG 37
Komatsu Limited 25
Rotor Group Ltd 37
Konecranes International plc 27
Sandvik 37
KraussMaffei Kunststofftechnik GmbH 27
Sanjo Machine Works Ltd. 37
Kubota Construction Machinery (Shanghai) Co.,Ltd 27
SANY Heavy Industry Co., Ltd 39
Kuraki Co, Ltd 27
Schuler Hydroforming GmbH & Co. KG 39
Lanlifeng Laser Technology Co., Ltd. 27
Shafer Valve Company 39
Liebherr 27
Shanghai Zhenhua Port Machinery Co. Ltd. 41
Liugong Engineering Construction 27
Sharpe Mixers 41
Loesche GmbH 27
Shaw-Box 41
Longkin (Shanghai) Excavator Co., Ltd. 27
Siemens AG 41
Machinenfabrik Niehoff Schwabach GmbH 27
Silvan Australia Pty. Ltd. 41
MAG Cincinnati 27
Sinovel Wind Co., Ltd. 41
MAG Industrial Automation Systems 29
Skoda 41
Makino Milling Machine Co.,Ltd 29
SMS Meer GmbH 41
Maschinenfabrik Herkules GmbH & Co. KG 29
SMS Siemag AG 41
Matsuura Machinery 31
Stanley Hydraulic Tools 43
Maxon Lift Corp. 31
Star Micronics Co., Ltd. 43
Meiki America Corp. 31
Stolle Machinery Company, LLC 43
Metso Minerals 31
Stork B.V. 43
MingYang Wind Turbine 31
Storti International S.p.A. 43
Minster Machine Company 31
Stromag AG 43
Mitsubishi Plastic Technology 33
Sumitomo (SHI) Demag Plastics Machinery GmbH 45
Mitsubishi-Hitachi Metals Machinery, Inc. 33
Sumitomo Heavy Industries 45
Mitsui High Tech Inc. 33
Technische Antriebselemente GmbH 45
Miyano Machinery 33
Terex Corporation 45
Mori-Seiki 33
The Robbins Company 45
MTS Systems 33
Toshiba Corporation 45
Mueller Weingarten 33
Toyo Advanced Technologies Co, Ltd 45
Nachi-Fujikoshi 33
Troester GmbH & Co. KG 45
Nakamura Tome Precision Industry 33
Tsugami Corporation 45
National Air Vibrator Company 33
Tuthill Vacuum & Blower Systems 47
Niigata Engineering Co, Ltd 33
Var-Spe S.p.A. 47
Nippon Pusnes 33
Vestas Wind Systems A/S 47
Nissei Plastic Industrial Co., Ltd. 33
Veth Motoren BV 47
Nissei Urawa Machine Tools Co, Ltd 33
Voith Industrial Services GmbH & Co. KG 47
Nissin Machine Works 33
Wagner Engineering Ltd. 47
Nord Gear 35
Waida Manufacturing Co., Ltd. 47
Nordex, Incorporated 35
Waldrich Coburg (Switzerland) 47
Ogawa Iron Works 35
Warren Rupp 49
Okuma Corporation 35
Wartsila 49
Oleo Buffers (Shanghai) Co., Ltd. 35
Wemhöner Surface Technologies GmbH & Co. KG 49
O-M, Ltd 35
XCMG Excavator Machinery Co., LTD 49
Ortlinghaus Products 35
Xiamen Engineering Machinery Co Ltd 49
Pequea Machine, INC. 35

III IV
Xuzhou XCG John Deere Manufacturing Co., Ltd 49 Product Index - Alphabetical
Yamazaki Giken Co., Ltd. 49
Yamazaki Mazak Seiko 49
Yasuda Precision Tools Ltd. 49
Zetor 49 Saleable Product Name Page
Shell Tellus S2 M 100 1
Shell Tellus S2 M 22 1
Shell Tellus S2 M 32 1
Shell Tellus S2 M 46 1
Shell Tellus S2 M 68 1
Shell Tellus S2 MA 10 15
Shell Tellus S2 MA 32 3
Shell Tellus S2 MA 46 3
Shell Tellus S2 V 100 5
Shell Tellus S2 V 15 3
Shell Tellus S2 V 22 5
Shell Tellus S2 V 32 3
Shell Tellus S2 V 46 3
Shell Tellus S2 V 68 1
Shell Tellus S2 VA 46 5
Shell Tellus S3 M 100 1
Shell Tellus S3 M 22 11
Shell Tellus S3 M 32 1
Shell Tellus S3 M 46 1
Shell Tellus S3 M 68 1
Shell Tellus S3 V 32 5
Shell Tellus S3 V 46 5
Shell Tellus S3 V 68 5
Shell Tellus S4 ME 22 15
Shell Tellus S4 ME 32 3
Shell Tellus S4 ME 46 3
Shell Tellus S4 ME 68 7
Shell Tellus S4 VX 32 3

V VI
1 OEM Shell Approvals Listed by OEM 2

OEM Product Approval Summary Approval Status

ABB Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

ABB Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For all equipment previously approved OEM Re-approval
Aichi Tokei Denki Co., Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for Machine Tool OEM Re-approval

Aichi Tokei Denki Co., Ltd. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for Machine Tool OEM Re-approval

Aker Wirth GmbH (Aker Solutions) Shell Tellus S2 M 100 Tellus S2 M 100 is recommended For Equipment OEM Listed

Aker Wirth GmbH (Aker Solutions) Shell Tellus S2 M 100 Tellus S2 M 100 is recommended for Wirth Equipment OEM Listed

Aker Wirth GmbH (Aker Solutions) Shell Tellus S2 M 32 Tellus S2 M 32 is recommended For Equipment OEM Listed

Aker Wirth GmbH (Aker Solutions) Shell Tellus S2 M 32 Tellus S2 M 32 is recommended for Wirth Equipment OEM Listed

Aker Wirth GmbH (Aker Solutions) Shell Tellus S2 M 46 Tellus S2 M 46 is recommended For Equipment OEM Listed

Aker Wirth GmbH (Aker Solutions) Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for Wirth Equipment OEM Listed

Aker Wirth GmbH (Aker Solutions) Shell Tellus S2 M 68 Tellus S2 M 68 is recommended For Equipment OEM Listed

Aker Wirth GmbH (Aker Solutions) Shell Tellus S2 M 68 Tellus S2 M 68 is recommended for Wirth Equipment OEM Listed

Alfa Laval Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) on Paper Machine Oil, Morlina, Omala, Tellus S2 & S3, OEM Re-approval
Turbo T, Cassida GL and EPS Products

Alfa Laval Shell Tellus S2 M 100 Tellus S2 M 100 is approved for equipment OEM Approved

Alfa Laval Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) on Paper Machine Oil, Morlina, Omala, Tellus S2 & S3, Turbo OEM Re-approval
T, Cassida GL and EPS Products

Alfa Laval Shell Tellus S2 M 46 Tellus S2 M 46 is approved for equipment OEM Approved

Alfa Laval Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) on Paper Machine Oil, Morlina, Omala, Tellus S2 & S3, Turbo OEM Re-approval
T, Cassida GL and EPS Products

Alfa Laval Shell Tellus S2 V 68 Tellus S2 V 68 is approved for equipment OEM Approved

Alfa Laval Shell Tellus S3 M 100 Tellus S3 M 100 is approved / recommended (Re-Image) on Paper Machine Oil, Morlina, Omala, Tellus S2 & S3, OEM Re-approval
Turbo T, Cassida GL and EPS Products

Alfa Laval Shell Tellus S3 M 100 Tellus S3 M 100 is approved for equipment OEM Approved

Alfa Laval Shell Tellus S3 M 68 Tellus S3 M 68 is approved / recommended (Re-Image) on Paper Machine Oil, Morlina, Omala, Tellus S2 & S3, Turbo OEM Re-approval
T, Cassida GL and EPS Products

Alfa Laval Shell Tellus S3 M 68 Tellus S3 M 68 is approved for equipment OEM Approved

Alfons Haar Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Alfons Haar Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Alfons Haar Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Alzmetall Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Alzmetall Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Alzmetall Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Alzmetall Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Alzmetall Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Alzmetall Shell Tellus S3 M 68 Tellus S3 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Amandus Kahl GmbH Shell Tellus S3 M 68 Tellus S3 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Andritz Shell Tellus S2 M 68 Tellus S2 M 68 is approved for Andritz Hydro Electromechanical equipment for hydropower units, pumps and turbo OEM Approved
generators

Angelus Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Angelus Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Angelus Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Angelus Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Angelus Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

APV Baker Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For all equipment previously approved OEM Re-approval
3 OEM Shell Approvals Listed by OEM 4

OEM Product Approval Summary Approval Status

APV Baker Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) For all equipment previously approved OEM Re-approval

APV Baker Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) For all equipment previously approved OEM Re-approval
Arburg GmbH Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Arburg GmbH Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Arburg GmbH Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Aries Engineering Inc Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Aries Engineering Inc Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Aries Engineering Inc Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Aries Engineering Inc Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Aries Engineering Inc Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

ATA PLASTIC MACHINERY (GUANGZHOU) CO., LTD Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

ATA PLASTIC MACHINERY (GUANGZHOU) CO., LTD Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Avic Xian Aero-Engine (Group) Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved for Avic Xian Aero Engine Group, Electrical and Mechanical Equipment OEM Approved

Avic Xian Aero-Engine (Group) Ltd. Shell Tellus S2 M 46 Tellus S2 M 46 is approved for Avic Xian Aero Engine Group, Electrical and Mechanical Equipment OEM Approved

Avic Xian Aero-Engine (Group) Ltd. Shell Tellus S3 M 32 Tellus S3 M 32 is approved for Avic Xian Aero Engine Group, Electrical and Mechanical Equipment OEM Approved

Avic Xian Aero-Engine (Group) Ltd. Shell Tellus S3 M 46 Tellus S3 M 46 is approved for Avic Xian Aero Engine Group, Electrical and Mechanical Equipment OEM Approved

Avic Xian Aero-Engine (Group) Ltd. Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved for Avic Xian Aero Engine Group, Electrical and Mechanical Equipment OEM Approved

Avic Xian Aero-Engine (Group) Ltd. Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved for Avic Xian Aero Engine Group, Electrical and Mechanical Equipment OEM Approved

Baotou Huiquan Rare Earth Industry(Group)Ltd Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Battenfeld Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Battenfeld Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Battenfeld Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Battenfeld Shell Tellus S2 M 46 Tellus S2 M 46 is recommended For Equipment OEM Listed

Battenfeld Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Battenfeld Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Behringer Saws Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Behringer Saws Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Behringer Saws Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Behringer Saws Shell Tellus S2 M 32 Tellus S2 M 32 is recommended Behringer saws OEM Listed

Behringer Saws Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Behringer Saws Shell Tellus S2 M 46 Tellus S2 M 46 is recommended Behringer saws OEM Listed

Behringer Saws Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Beijing Beizhong Steam Turbine Generator, Ltd Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Beijing Jingcheng New Energy Co., Ltd. Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved for Beijing Jingcheng 1.5MW Wind Turbines OEM Approved

Benz & Hilgers GmbH Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Benz & Hilgers GmbH Shell Tellus S2 MA 32 Tellus S2 MA 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Benz & Hilgers GmbH Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Besser Company Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Besser Company Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Besser Company Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Besser Company Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Besser Company Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval
5 OEM Shell Approvals Listed by OEM 6

OEM Product Approval Summary Approval Status

Besser Company Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Besser Company Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval
Besser Company Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Besser Company Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Besser Company Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Besser Company Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Blackmer Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Blackmer Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Blackmer Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Blackmer Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Blohm & Voss GmbH Shell Tellus S2 M 100 Tellus S2 M 100 is recommended for Blohm & Voss Simplex-Compact OEM Listed

Blohm & Voss GmbH Shell Tellus S2 V 100 Tellus S2 V 100 is recommended for Blohm & Voss Simplex-Compact OEM Listed

Blohm & Voss GmbH Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Blohm & Voss GmbH Shell Tellus S2 V 68 Tellus S2 V 68 is recommended for Blohm & Voss Simplex-Compact OEM Listed

Bosch Rexroth Shell Tellus S2 M 100 Tellus S2 M 100 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S2 M 100 Tellus S2 M 100 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S2 M 22 Tellus S2 M 22 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S2 M 22 Tellus S2 M 22 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S2 M 32 Tellus S2 M 32 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S2 M 32 Tellus S2 M 32 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Bosch Rexroth Shell Tellus S2 M 46 Tellus S2 M 46 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S2 M 68 Tellus S2 M 68 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S2 M 68 Tellus S2 M 68 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S2 MA 32 Tellus S2 MA 32 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S2 MA 32 Tellus S2 MA 32 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S2 MA 46 Tellus S2 MA 46 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S2 MA 46 Tellus S2 MA 46 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S2 V 32 Tellus S2 V 32 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S2 V 32 Tellus S2 V 32 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S2 V 46 Tellus S2 V 46 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S2 V 46 Tellus S2 V 46 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S2 V 68 Tellus S2 V 68 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S2 V 68 Tellus S2 V 68 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S2 VA 46 Tellus S2 VA 46 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S2 VA 46 Tellus S2 VA 46 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S3 V 32 Tellus S3 V 32 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S3 V 32 Tellus S3 V 32 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S3 V 46 Tellus S3 V 46 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S3 V 46 Tellus S3 V 46 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S3 V 68 Tellus S3 V 68 is recommended for Axial Piston Pumps OEM Listed
7 OEM Shell Approvals Listed by OEM 8

OEM Product Approval Summary Approval Status

Bosch Rexroth Shell Tellus S3 V 68 Tellus S3 V 68 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S4 ME 32 Tellus S4 ME 32 is recommended for Axial Piston Pumps OEM Listed
Bosch Rexroth Shell Tellus S4 ME 32 Tellus S4 ME 32 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S4 ME 46 Tellus S4 ME 46 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S4 ME 46 Tellus S4 ME 46 is recommended For Equipment OEM Listed

Bosch Rexroth Shell Tellus S4 ME 68 Tellus S4 ME 68 is recommended for Axial Piston Pumps OEM Listed

Bosch Rexroth Shell Tellus S4 ME 68 Tellus S4 ME 68 is recommended For Equipment OEM Listed

Boving Fouress Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Boving Fouress Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

CAE, Inc. Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for equipment OEM Listed

CAE, Inc. Shell Tellus S3 M 46 Tellus S3 M 46 is recommended for equipment OEM Listed

Capital Engineering & Research Incorporation Ltd Shell Tellus S2 M 32 Tellus S2 M 32 is approved for MCC-Beris Rolling Mill Plant Hydraulic System OEM Approved

Capital Engineering & Research Incorporation Ltd Shell Tellus S2 M 46 Tellus S2 M 46 is approved for MCC-Beris Rolling Mill Plant Hydraulic System OEM Approved

Capital Engineering & Research Incorporation Ltd Shell Tellus S2 M 68 Tellus S2 M 68 is approved for MCC-Beris Rolling Mill Plant Hydraulic System OEM Approved

CarnaudMetalbox Engineering Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

CarnaudMetalbox Engineering Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

CarnaudMetalbox Engineering Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

CarnaudMetalbox Engineering Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

CarnaudMetalbox Engineering Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Caterpillar Marine Power Systems Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

China First Heavy Industries Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

China First Heavy Industries Shell Tellus S2 M 46 Tellus S2 M 46 is approved for Cold Mill Equipment OEM Approved

China First Heavy Industries Shell Tellus S3 M 32 Tellus S3 M 32 is approved for Cold Mill Equipment OEM Approved

China National ErZhong Group Co.(CNEG) Shell Tellus S2 M 46 Tellus S2 M 46 is approved for China National Erzhong Group CO's 8000 ton Forging Press Machinery OEM Approved

China National ErZhong Group Co.(CNEG) Shell Tellus S2 M 68 Tellus S2 M 68 is approved for China National Erzhong Group CO's 8000 ton Forging Press Machinery OEM Approved

China National ErZhong Group Co.(CNEG) Shell Tellus S3 M 46 Tellus S3 M 46 is approved for China National Erzhong Group CO's 8000 ton Forging Press Machinery OEM Approved

China National ErZhong Group Co.(CNEG) Shell Tellus S3 M 68 Tellus S3 M 68 is approved for China National Erzhong Group CO's 8000 ton Forging Press Machinery OEM Approved

China National ErZhong Group Co.(CNEG) Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved for China National Erzhong Group CO's 8000 ton Forging Press Machinery OEM Approved

China National ErZhong Group Co.(CNEG) Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved for China National Erzhong Group CO's 8000 ton Forging Press Machinery OEM Approved

Cincinnati Lamb Shell Tellus S2 M 32 Tellus S2 M 32 is recommended CM spec P-34, P-35, P-39, P-47, P-50, P-53, P-59, P-62, P-63, P-64, P-65, P-68, P- OEM Listed
69, P-70, P-72, P-74, P-76, P-77, P-79, P-80

Cincinnati Lamb Shell Tellus S2 M 46 Tellus S2 M 46 is recommended CM spec P-34, P-35, P-39, P-47, P-50, P-53, P-59, P-62, P-63, P-64, P-65, P-68, P- OEM Listed
69, P-70, P-72, P-74, P-76, P-77, P-79, P-80

Cincinnati Lamb Shell Tellus S2 M 68 Tellus S2 M 68 is recommended CM spec P-34, P-35, P-39, P-47, P-50, P-53, P-59, P-62, P-63, P-64, P-65, P-68, P- OEM Listed
69, P-70, P-72, P-74, P-76, P-77, P-79, P-80

Cincinnati Lamb Shell Tellus S2 V 32 Tellus S2 V 32 is recommended CM spec P-68 OEM Listed

Cincinnati Lamb Shell Tellus S2 V 32 Tellus S2 V 32 is approved CM spec P-68, P-69, P-70 OEM Approved

Cincinnati Lamb Shell Tellus S2 V 32 Tellus S2 V 32 is recommended CM spec P-34, P-35, P-39, P-47, P-50, P-53, P-59, P-62, P-63, P-64, P-65, P-68, P-69, OEM Listed
P-70, P-72, P-74, P-76, P-77, P-79, P-80

Cincinnati Lamb Shell Tellus S2 V 46 Tellus S2 V 46 is approved CM spec P-68, P-69, P-70 OEM Approved

Cincinnati Lamb Shell Tellus S2 V 46 Tellus S2 V 46 is recommended CM spec P-70 OEM Listed

Cincinnati Lamb Shell Tellus S2 V 46 Tellus S2 V 46 is recommended CM spec P-34, P-35, P-39, P-47, P-50, P-53, P-59, P-62, P-63, P-64, P-65, P-68, P-69, OEM Listed
P-70, P-72, P-74, P-76, P-77, P-79, P-80

Cincinnati Lamb Shell Tellus S2 V 68 Tellus S2 V 68 is recommended CM spec P-69 OEM Listed
9 OEM Shell Approvals Listed by OEM 10

OEM Product Approval Summary Approval Status

Cincinnati Lamb Shell Tellus S2 V 68 Tellus S2 V 68 is approved CM spec P-68, P-69, P-70 OEM Approved

Cincinnati Lamb Shell Tellus S2 V 68 Tellus S2 V 68 is recommended CM spec P-34, P-35, P-39, P-47, P-50, P-53, P-59, P-62, P-63, P-64, P-65, P-68, P-69, OEM Listed
P-70, P-72, P-74, P-76, P-77, P-79, P-80

Cincinnati Lamb Shell Tellus S2 VA 46 Tellus S2 VA 46 is recommended CM spec P-34, P-35, P-39, P-47, P-50, P-53, P-59, P-62, P-63, P-64, P-65, P-68, P- OEM Listed
69, P-70, P-72, P-74, P-76, P-77, P-79, P-80

Cincinnati Lamb Shell Tellus S3 M 32 Tellus S3 M 32 is recommended CM spec P-34, P-35, P-39, P-47, P-50, P-53, P-59, P-62, P-63, P-64, P-65, P-68, P- OEM Listed
69, P-70, P-72, P-74, P-76, P-77, P-79, P-80

Cincinnati Lamb Shell Tellus S3 M 46 Tellus S3 M 46 is recommended CM spec P-34, P-35, P-39, P-47, P-50, P-53, P-59, P-62, P-63, P-64, P-65, P-68, P- OEM Listed
69, P-70, P-72, P-74, P-76, P-77, P-79, P-80

Cincinnati Lamb Shell Tellus S3 M 68 Tellus S3 M 68 is recommended CM spec P-34, P-35, P-39, P-47, P-50, P-53, P-59, P-62, P-63, P-64, P-65, P-68, P- OEM Listed
69, P-70, P-72, P-74, P-76, P-77, P-79, P-80

Cincinnati Lamb Shell Tellus S4 ME 32 Tellus S4 ME 32 is recommended CM spec P-34, P-35, P-39, P-47, P-50, P-53, P-59, P-62, P-63, P-64, P-65, P-68, P- OEM Listed
69, P-70, P-72, P-74, P-76, P-77, P-79, P-80

Cincinnati Lamb Shell Tellus S4 ME 46 Tellus S4 ME 46 is recommended CM spec P-34, P-35, P-39, P-47, P-50, P-53, P-59, P-62, P-63, P-64, P-65, P-68, P- OEM Listed
69, P-70, P-72, P-74, P-76, P-77, P-79, P-80

Cincinnati Lamb Shell Tellus S4 ME 68 Tellus S4 ME 68 is recommended CM spec P-34, P-35, P-39, P-47, P-50, P-53, P-59, P-62, P-63, P-64, P-65, P-68, P- OEM Listed
69, P-70, P-72, P-74, P-76, P-77, P-79, P-80

Citizen Machinery Co., Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Cockerill Maintenance & Ingenierie (CMI) Group Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) cold rolling mills and process lines OEM Re-approval

Condux International Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Condux International Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Condux International Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Condux International Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Condux International Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Condux International Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Condux International Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Condux International Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Condux International Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Condux International Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Condux International Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Condux International Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Cone Drive Operations Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

Cone Drive Operations Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

Cone Drive Operations Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

Cone Drive Operations Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

Cone Drive Operations Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

Cosmos Machinery Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Cotta Transmissions Company, LLC Shell Tellus S4 ME 32 Tellus S4 ME 32 is recommended Cotta Gearboxes OEM Listed

Cotta Transmissions Company, LLC Shell Tellus S4 ME 46 Tellus S4 ME 46 is recommended Cotta Gearboxes OEM Listed

Daido Machinery Co., Ltd. Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for Bead Facing Machines OEM Re-approval

Daido Machinery Co., Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for Bead Facing Machines OEM Re-approval

Daido Machinery Co., Ltd. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for Bead Facing Machines OEM Re-approval

Daido Machinery Co., Ltd. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for Bead Facing Machines OEM Re-approval

Daimler AG Shell Tellus S3 M 46 Tellus S3 M 46 is approved for Mercedes-Benz Vehicles and Assemblies OEM Approved

Daimler AG Shell Tellus S3 M 46 Tellus S3 M 46 is approved Daimler Engine OEM Approved

Dainichi Kinzoku Kogyo Co., Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval
11 OEM Shell Approvals Listed by OEM 12

OEM Product Approval Summary Approval Status

Dainichi Kinzoku Kogyo Co., Ltd. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Dalian Huakai Machine Tool Co. , Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval
Danfoss Bauer GmbH Shell Tellus S2 V 100 Tellus S2 V 100 Customer endorsed on Omala 220, Tivela S 220 & 460, Tivela WB, Tivela SD and Tellus T Customer Endorsed

Danfoss Bauer GmbH Shell Tellus S2 V 15 Tellus S2 V 15 Customer endorsed on Omala 220, Tivela S 220 & 460, Tivela WB, Tivela SD and Tellus T Customer Endorsed

Danfoss Bauer GmbH Shell Tellus S2 V 22 Tellus S2 V 22 Customer endorsed on Omala 220, Tivela S 220 & 460, Tivela WB, Tivela SD and Tellus T Customer Endorsed

Danfoss Bauer GmbH Shell Tellus S2 V 32 Tellus S2 V 32 Customer endorsed on Omala 220, Tivela S 220 & 460, Tivela WB, Tivela SD and Tellus T Customer Endorsed

Danfoss Bauer GmbH Shell Tellus S2 V 46 Tellus S2 V 46 Customer endorsed on Omala 220, Tivela S 220 & 460, Tivela WB, Tivela SD and Tellus T Customer Endorsed

Danfoss Bauer GmbH Shell Tellus S2 V 68 Tellus S2 V 68 Customer endorsed on Omala 220, Tivela S 220 & 460, Tivela WB, Tivela SD and Tellus T Customer Endorsed

Danfoss Bauer GmbH Shell Tellus S3 M 100 Tellus S3 M 100 Customer endorsed on Omala 220, Tivela S 220 & 460, Tivela WB, Tivela SD and Tellus T Customer Endorsed

Danfoss Bauer GmbH Shell Tellus S3 M 22 Tellus S3 M 22 Customer endorsed on Omala 220, Tivela S 220 & 460, Tivela WB, Tivela SD and Tellus T Customer Endorsed

Danfoss Bauer GmbH Shell Tellus S3 M 32 Tellus S3 M 32 Customer endorsed on Omala 220, Tivela S 220 & 460, Tivela WB, Tivela SD and Tellus T Customer Endorsed

Danfoss Bauer GmbH Shell Tellus S3 M 46 Tellus S3 M 46 Customer endorsed on Omala 220, Tivela S 220 & 460, Tivela WB, Tivela SD and Tellus T Customer Endorsed

Danfoss Bauer GmbH Shell Tellus S3 M 68 Tellus S3 M 68 Customer endorsed on Omala 220, Tivela S 220 & 460, Tivela WB, Tivela SD and Tellus T Customer Endorsed

Danieli & C. Officine Meccaniche S. p. A. Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Danieli & C. Officine Meccaniche S. p. A. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Danieli & C. Officine Meccaniche S. p. A. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Dean Smith and Grace Ltd Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) on Tellus 68 and Alvania EP(LF) 2 OEM Re-approval

Denison Hydraulics Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S3 M 100 Tellus S3 M 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S3 M 22 Tellus S3 M 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S3 M 46 Tellus S3 M 46 is approved for DENSON approved fluids for HF0, HF1, HF2 OEM Approved

Denison Hydraulics Shell Tellus S3 M 68 Tellus S3 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S3 V 32 Tellus S3 V 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S3 V 46 Tellus S3 V 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S3 V 68 Tellus S3 V 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Denison Hydraulics Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Dieffenbacher GmbH + Co. KG Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Dieffenbacher GmbH + Co. KG Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Dieffenbacher GmbH + Co. KG Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Dieffenbacher GmbH + Co. KG Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Dieffenbacher GmbH + Co. KG Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Dieffenbacher GmbH + Co. KG Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval
13 OEM Shell Approvals Listed by OEM 14

OEM Product Approval Summary Approval Status

Dieffenbacher GmbH + Co. KG Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Dieffenbacher GmbH + Co. KG Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval
Dieffenbacher GmbH + Co. KG Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Drum Industries Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Drum Industries Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Drum Industries Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Drum Industries Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Drum Industries Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Drum Industries Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

DS Technologie Werkzeugmaschinenbau GmbH Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

DS Technologie Werkzeugmaschinenbau GmbH Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

DS Technologie Werkzeugmaschinenbau GmbH Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

DS Technologie Werkzeugmaschinenbau GmbH Shell Tellus S2 MA 32 Tellus S2 MA 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

DS Technologie Werkzeugmaschinenbau GmbH Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

DS Technologie Werkzeugmaschinenbau GmbH Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

DS Technologie Werkzeugmaschinenbau GmbH Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

DS Technologie Werkzeugmaschinenbau GmbH Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Eaton Corporation Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

Eaton Corporation Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for equipment OEM Re-approval

Eaton Corporation Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Eaton Corporation Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Eaton Corporation Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Eaton Corporation Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Eaton Corporation Shell Tellus S3 M 32 Tellus S3 M 32 is approved For equipment / ATS-373 OEM Approved

Ebara Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Eirich GmbH & Co. K.G. Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Eirich GmbH & Co. K.G. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Eirich GmbH & Co. K.G. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Eirich GmbH & Co. K.G. Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

EMCO MAIER Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

EMCO MAIER Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

EMCO MAIER Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

EMCO MAIER Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

EMCO MAIER Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

EMCO MAIER Shell Tellus S3 M 100 Tellus S3 M 100 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

EMCO MAIER Shell Tellus S3 M 22 Tellus S3 M 22 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

EMCO MAIER Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

EMCO MAIER Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

EMCO MAIER Shell Tellus S3 M 68 Tellus S3 M 68 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

EMCO MAIER Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

Emerson Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Emerson Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval
15 OEM Shell Approvals Listed by OEM 16

OEM Product Approval Summary Approval Status

Emerson Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Emerson Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval
Emerson Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Emerson Climate Technologies Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

Emerson Climate Technologies Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for equipment OEM Re-approval

Emerson Climate Technologies Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Emerson Climate Technologies Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Emerson Climate Technologies Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Emerson Climate Technologies Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Emerson Motor Technologies Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Emerson Motor Technologies Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Emerson Motor Technologies Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Emerson Motor Technologies Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Emerson Motor Technologies Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Engel Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for equipment OEM Listed

Engel Shell Tellus S3 M 46 Tellus S3 M 46 is recommended for equipment OEM Listed

Engel Shell Tellus S4 ME 22 Tellus S4 ME 22 is approved for engel Injection Moulding Machines OEM Approved

Engel Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved for engel Injection Moulding Machines OEM Approved

Engel Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved for engel Injection Moulding Machines OEM Approved

Engel Shell Tellus S4 ME 68 Tellus S4 ME 68 is approved for engel Injection Moulding Machines OEM Approved

Enomoto Kogyo Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Enshu Limited Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Enshu Limited Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Ernest Grob AG Shell Tellus S2 M 22 Tellus S2 M 22 is recommended for equipment OEM Listed

Ernest Grob AG Shell Tellus S2 M 22 Tellus S2 M 22 is recommended for use in GROB Machines OEM Listed

Ernest Grob AG Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Ernest Grob AG Shell Tellus S2 M 32 Tellus S2 M 32 is recommended for equipment OEM Listed

Ernest Grob AG Shell Tellus S2 M 32 Tellus S2 M 32 is recommended for use in GROB Machines OEM Listed

Ernest Grob AG Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Ernest Grob AG Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for equipment OEM Listed

Ernest Grob AG Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for use in GROB Machines OEM Listed

Ernest Grob AG Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Ernest Grob AG Shell Tellus S2 MA 10 Tellus S2 MA 10 is recommended for equipment OEM Listed

Ernest Grob AG Shell Tellus S2 MA 10 Tellus S2 MA 10 is recommended for use in GROB Machines OEM Listed

Ernest Grob AG Shell Tellus S2 MA 46 Tellus S2 MA 46 is recommended for equipment OEM Listed

Ernest Grob AG Shell Tellus S2 MA 46 Tellus S2 MA 46 is recommended for use in GROB Machines OEM Listed

Ernest Grob AG Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Ernest Grob AG Shell Tellus S3 M 32 Tellus S3 M 32 is recommended for equipment OEM Listed

Ernest Grob AG Shell Tellus S3 M 32 Tellus S3 M 32 is recommended for use in GROB Machines OEM Listed

Ernest Grob AG Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Ernest Grob AG Shell Tellus S3 M 46 Tellus S3 M 46 is recommended for equipment OEM Listed

Ernest Grob AG Shell Tellus S3 M 46 Tellus S3 M 46 is recommended for use in GROB Machines OEM Listed
17 OEM Shell Approvals Listed by OEM 18

OEM Product Approval Summary Approval Status

Ernest Grob AG Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Falk Corporation Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval
Falk Corporation Shell Tellus S2 M 100 Tellus S2 M 100 is approved for Falk Heritage Gear Drives OEM Approved

Falk Corporation Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Falk Corporation Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Falk Corporation Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Falk Corporation Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Falk Corporation Shell Tellus S2 M 68 Tellus S2 M 68 is approved for Falk Heritage Gear Drives OEM Approved

Ferromatik Milacron Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Ferromatik Milacron Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for Injection Moulding Machines manufactured by Ferromatik OEM Re-approval
Milacron India Ltd

Fleissner GmbH Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for use in Fleissner Machines OEM Listed

Fleissner GmbH Shell Tellus S2 M 68 Tellus S2 M 68 is recommended for use in Fleissner Machines OEM Listed

Flowserve Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Flowserve Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Flowserve Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Flowserve Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Flowserve Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

FLSmidth Group Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

FLSmidth Group Shell Tellus S2 M 22 Tellus S2 M 22 is approved for FLSmidth equipment OEM Approved

FLSmidth Group Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

FLSmidth Group Shell Tellus S2 M 32 Tellus S2 M 32 is approved for FLSmidth equipment OEM Approved

FLSmidth Group Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

FLSmidth Group Shell Tellus S2 M 46 Tellus S2 M 46 is approved for FLSmidth equipment OEM Approved

FLSmidth Group Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

FLSmidth Group Shell Tellus S2 M 68 Tellus S2 M 68 is approved for FLSmidth equipment OEM Approved

FLSmidth Group Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) For Equipment OEM Re-approval

FLSmidth Group Shell Tellus S2 V 15 Tellus S2 V 15 is approved for FLSmidth equipment OEM Approved

FLSmidth Group Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

FLSmidth Group Shell Tellus S2 V 22 Tellus S2 V 22 is approved for FLSmidth equipment OEM Approved

FLSmidth Group Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

FLSmidth Group Shell Tellus S2 V 32 Tellus S2 V 32 is approved for FLSmidth equipment OEM Approved

FLSmidth Group Shell Tellus S3 M 100 Tellus S3 M 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

FLSmidth Group Shell Tellus S3 M 100 Tellus S3 M 100 is approved for FLSmidth equipment OEM Approved

FLSmidth Group Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Frank Mohn AS Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Frank Mohn AS Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Fuji Machine Mfg. Co., Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Fuji Seiki Machine Works Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for Machine Tool OEM Re-approval

Fuji Seiki Machine Works Ltd. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for Machine Tool OEM Re-approval

Fuji Seisakusho Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Fuji Seisakusho Ltd. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval
19 OEM Shell Approvals Listed by OEM 20

OEM Product Approval Summary Approval Status

Fuji Seisakusho Ltd. Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

FuShun Excavator Corporation Ltd Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval
FuShun Excavator Corporation Ltd Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

G. Siempelkamp GmbH & Co.KG Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for equipment OEM Listed

G. Siempelkamp GmbH & Co.KG Shell Tellus S2 M 68 Tellus S2 M 68 is recommended for equipment OEM Listed

G. Siempelkamp GmbH & Co.KG Shell Tellus S2 MA 46 Tellus S2 MA 46 is recommended for equipment OEM Listed

G. Siempelkamp GmbH & Co.KG Shell Tellus S3 M 46 Tellus S3 M 46 is recommended for equipment OEM Listed

G. Siempelkamp GmbH & Co.KG Shell Tellus S3 M 68 Tellus S3 M 68 is recommended for equipment OEM Listed

Gamesa Corporacion Tecnologica S.A. Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Gamesa Corporacion Tecnologica S.A. Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

GEA Shell Tellus S2 M 32 Tellus S2 M 32 is recommended for GEA NIRO rotary atomizers OEM Listed

GEA Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for GEA NIRO rotary atomizers OEM Listed

GEA Shell Tellus S2 M 68 Tellus S2 M 68 is recommended for GEA NIRO rotary atomizers OEM Listed

GEA Shell Tellus S2 V 32 Tellus S2 V 32 is recommended for GEA NIRO rotary atomizers OEM Listed

GEA Shell Tellus S3 M 46 Tellus S3 M 46 is recommended for GEA NIRO rotary atomizers OEM Listed

GEA Shell Tellus S3 M 68 Tellus S3 M 68 is recommended for GEA NIRO rotary atomizers OEM Listed

GEA Shell Tellus S3 V 32 Tellus S3 V 32 is recommended for GEA NIRO rotary atomizers OEM Listed

GEA Shell Tellus S4 ME 32 Tellus S4 ME 32 is recommended for GEA NIRO rotary atomizers OEM Listed

GEA Shell Tellus S4 ME 46 Tellus S4 ME 46 is recommended for GEA NIRO rotary atomizers OEM Listed

GEA Shell Tellus S4 ME 68 Tellus S4 ME 68 is recommended for GEA NIRO rotary atomizers OEM Listed

Gebr. Pfeiffer AG Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Gebr. Pfeiffer AG Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Gebr. Pfeiffer AG Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Genie Industries Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Genie Industries Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Genie Industries Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Genie Industries Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Genie Industries Shell Tellus S2 V 32 Tellus S2 V 32 is recommended for all Terex AWP products / GES 1369 OEM Listed

Genie Industries Shell Tellus S2 V 32 Tellus S2 V 32 is recommended for Terex Aerial Work Platforms / GES 1369 OEM Listed

Genie Industries Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Genie Industries Shell Tellus S2 V 46 Tellus S2 V 46 is recommended for all Terex AWP products / GES 1369 OEM Listed

Genie Industries Shell Tellus S2 V 46 Tellus S2 V 46 is recommended for Terex Aerial Work Platforms / GES 1369 OEM Listed

Genie Industries Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Genie Industries Shell Tellus S4 VX 32 Tellus S4 VX 32 is recommended for all Terex AWP products / GES 1369 OEM Listed

Goss International Corporation Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

Goss International Corporation Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Goss International Corporation Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Goss International Corporation Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Goss International Corporation Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Gottwald Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Gottwald Shell Tellus S3 V 32 Tellus S3 V 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Gottwald Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval
21 OEM Shell Approvals Listed by OEM 22

OEM Product Approval Summary Approval Status

Gottwald Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Guangdong Keda Dynamo-Electric Co Ltd Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval
Hagglunds Drives AB Shell Tellus S3 M 100 Tellus S3 M 100 is approved Hagglunds Drives Sugar Mill hydraulic drives OEM Approved

Hagglunds Drives AB Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Harburg-Freudenberger Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval
Maschinenbau GmbH

Harburg-Freudenberger Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved / recommended (Re-Image) for equipment OEM Re-approval
Maschinenbau GmbH

Harburg-Freudenberger Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval
Maschinenbau GmbH

HAWE Hydraulik GmbH & Co KG Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Hayward Gordon Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Hayward Gordon Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Hayward Gordon Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Hayward Gordon Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Hayward Gordon Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Hayward Gordon Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Hegenscheidt-MFD GmbH & Co. KG Shell Tellus S2 M 22 Tellus S2 M 22 is recommended for equipment OEM Listed

Hegenscheidt-MFD GmbH & Co. KG Shell Tellus S2 M 32 Tellus S2 M 32 is recommended for equipment OEM Listed

Hegenscheidt-MFD GmbH & Co. KG Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for equipment OEM Listed

Hegenscheidt-MFD GmbH & Co. KG Shell Tellus S3 M 32 Tellus S3 M 32 is recommended for equipment OEM Listed

Hegenscheidt-MFD GmbH & Co. KG Shell Tellus S3 M 46 Tellus S3 M 46 is recommended for equipment OEM Listed

Herrenknecht AG Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Herrenknecht AG Shell Tellus S2 M 46 Tellus S2 M 46 is recommended For Equipment OEM Listed

Herrenknecht AG Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Herrenknecht AG Shell Tellus S2 M 68 Tellus S2 M 68 is recommended For Equipment OEM Listed

Hine Group Shell Tellus S2 V 32 Tellus S2 V 32 is approved for Hine Hydraulics Wind Turbines OEM Approved

Hitachi Construction Machinery Co., Ltd. Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Hitachi Construction Machinery Co., Ltd. Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Hitachi Construction Machinery Co., Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Hitachi Construction Machinery Co., Ltd. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Hitachi Construction Machinery Co., Ltd. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Hitachi Construction Machinery Co., Ltd. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Hokushin Engineering Shell Tellus S2 V 32 Tellus S2 V 32 is approved for Beier Variable Gears (Morlina S2 B 150) and Disco Variable Gears (Tellus S2 V 32) OEM Approved

Homma Machinery Co., Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for Machine Tools OEM Re-approval

Homma Machinery Co., Ltd. Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for Machine Tools OEM Re-approval

Horkos Corp. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Horkos Corp. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Horkos Corp. Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Horkos Corp. Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Howa Machinery Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Huddig AB Shell Tellus S3 V 46 Tellus S3 V 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Husky Injection Molding Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval
23 OEM Shell Approvals Listed by OEM 24

OEM Product Approval Summary Approval Status

Husky Injection Molding Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Husky Injection Molding Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval
Husky Injection Molding Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Husky Injection Molding Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for Husky equipment OEM Listed

Husky Injection Molding Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Husky Injection Molding Shell Tellus S3 M 46 Tellus S3 M 46 is recommended for Husky equipment OEM Listed

Husky Injection Molding Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved All Hydraulic Husky I.M.S. Systems OEM Approved

Husky Injection Molding Shell Tellus S4 ME 46 Tellus S4 ME 46 is recommended for Husky equipment OEM Listed

Hydro Leduc L.P. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Ikegai Wado Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

Ikegai Wado Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Ikegai Wado Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Ikegai Wado Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Ikegai Wado Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

International Construction Equipment, Inc. Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

International Construction Equipment, Inc. Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

International Construction Equipment, Inc. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

International Construction Equipment, Inc. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

International Construction Equipment, Inc. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Japan Steel Works Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Japan Steel Works Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

JBT Foodtech Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

JBT Foodtech Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) For Equipment OEM Re-approval

JBT Foodtech Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

JBT Foodtech Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

JBT Foodtech Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

JBT Foodtech Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

JBT Foodtech Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

JSC "Kirovsky mashzavod 1 Maya" Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

JTEKT Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Kanzaki Kokyukoki Mgf Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kanzaki Kokyukoki Mgf Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kanzaki Kokyukoki Mgf Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kanzaki Kokyukoki Mgf Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kanzaki Kokyukoki Mgf Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kanzaki Kokyukoki Mgf Shell Tellus S3 M 100 Tellus S3 M 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kanzaki Kokyukoki Mgf Shell Tellus S3 M 22 Tellus S3 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kanzaki Kokyukoki Mgf Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kanzaki Kokyukoki Mgf Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kanzaki Kokyukoki Mgf Shell Tellus S3 M 68 Tellus S3 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kanzaki Kokyukoki Mgf Shell Tellus S4 ME 22 Tellus S4 ME 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kanzaki Kokyukoki Mgf Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for equipment OEM Re-approval
25 OEM Shell Approvals Listed by OEM 26

OEM Product Approval Summary Approval Status

Kanzaki Kokyukoki Mgf Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kanzaki Kokyukoki Mgf Shell Tellus S4 ME 68 Tellus S4 ME 68 is approved / recommended (Re-Image) for equipment OEM Re-approval
Karatsu Iron Works Ltd. Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for Karatsu Machines OEM Re-approval

Karatsu Iron Works Ltd. Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) for Karatsu Machines OEM Re-approval

Karatsu Iron Works Ltd. Shell Tellus S3 M 68 Tellus S3 M 68 is approved / recommended (Re-Image) for Karatsu Machines OEM Re-approval

Karatsu Iron Works Ltd. Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for Karatsu Machines OEM Re-approval

Karl Klink GmbH Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Karl Klink GmbH Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kashifuji Works Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for CNC Hobbing Machine OEM Re-approval

Kashifuji Works Ltd. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for CNC Hobbing Machine OEM Re-approval

Kashifuji Works Ltd. Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) for CNC Hobbing Machine OEM Re-approval

Kashifuji Works Ltd. Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for CNC Hobbing Machine OEM Re-approval

Kautex Maschinenbau GmbH Shell Tellus S3 M 46 Tellus S3 M 46 is recommended for Bearing OEM Listed

Kawaguchi Limited Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Kawaguchi Limited Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

KHS AG Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

KHS AG Shell Tellus S2 M 22 Tellus S2 M 22 is recommended for KHS Machines and systems specifically Hydraulics & Gears OEM Listed

KHS AG Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

KHS AG Shell Tellus S2 M 32 Tellus S2 M 32 is recommended for KHS Machines and systems specifically Hydraulics & Gears OEM Listed

KHS AG Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

KHS AG Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for KHS Machines and systems specifically Hydraulics & Gears OEM Listed

KHS AG Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

KHS AG Shell Tellus S2 M 68 Tellus S2 M 68 is recommended for KHS Machines and systems specifically Hydraulics & Gears OEM Listed

Kiremko Duurland B.V. Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kiremko Duurland B.V. Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kiremko Duurland B.V. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kiremko Duurland B.V. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kiremko Duurland B.V. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kiremko Duurland B.V. Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kiremko Duurland B.V. Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kiremko Duurland B.V. Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kiremko Duurland B.V. Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kiremko Duurland B.V. Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kiremko Duurland B.V. Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kitagawa Kogyo Co., Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Kitagawa Kogyo Co., Ltd. Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Kitagawa Kogyo Co., Ltd. Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Kitagawa Kogyo Co., Ltd. Shell Tellus S3 V 32 Tellus S3 V 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Kitagawa Kogyo Co., Ltd. Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Komatsu Limited Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

Komatsu Limited Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Komatsu Limited Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval
27 OEM Shell Approvals Listed by OEM 28

OEM Product Approval Summary Approval Status

Komatsu Limited Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Komatsu Limited Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for equipment OEM Re-approval
Komatsu Limited Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Konecranes International plc Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for equipment OEM Re-approval

Konecranes International plc Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Konecranes International plc Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Konecranes International plc Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

KraussMaffei Kunststofftechnik GmbH Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved for equipment OEM Approved

KraussMaffei Kunststofftechnik GmbH Shell Tellus S3 M 46 Tellus S3 M 46 is approved for equipment OEM Approved

KraussMaffei Kunststofftechnik GmbH Shell Tellus S3 M 46 Tellus S3 M 46 self certified For KM Applications Self Certification

KraussMaffei Kunststofftechnik GmbH Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved for equipment OEM Approved

KraussMaffei Kunststofftechnik GmbH Shell Tellus S4 ME 46 Tellus S4 ME 46 self certified For KM Applications Self Certification

Kubota Construction Machinery (Shanghai) Co.,Ltd Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kuraki Co, Ltd Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Kuraki Co, Ltd Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Lanlifeng Laser Technology Co., Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Liebherr Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Liebherr Shell Tellus S4 ME 22 Tellus S4 ME 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Liebherr Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Liebherr Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Liebherr Shell Tellus S4 ME 68 Tellus S4 ME 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Liugong Engineering Construction Shell Tellus S2 M 46 Tellus S2 M 46 is approved for Liu Gong CLG9 Series Excavators OEM Approved

Liugong Engineering Construction Shell Tellus S2 V 32 Tellus S2 V 32 is approved for Liu Gong CLG9 Series Excavators OEM Approved

Loesche GmbH Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Loesche GmbH Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Longkin (Shanghai) Excavator Co., Ltd. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for use in Longking (Shanghai) Excavators OEM Re-approval

Longkin (Shanghai) Excavator Co., Ltd. Shell Tellus S2 M 46 Tellus S2 M 46 is approved for Lonking Excavator OEM Approved

Longkin (Shanghai) Excavator Co., Ltd. Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for use in Longking (Shanghai) Excavators OEM Re-approval

Longkin (Shanghai) Excavator Co., Ltd. Shell Tellus S2 V 68 Tellus S2 V 68 is approved for Lonking Excavator OEM Approved

Longkin (Shanghai) Excavator Co., Ltd. Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved / recommended (Re-Image) for use in Longking (Shanghai) Excavators OEM Re-approval

Machinenfabrik Niehoff Schwabach GmbH Shell Tellus S2 M 22 Tellus S2 M 22 is recommended for equipment OEM Listed

Machinenfabrik Niehoff Schwabach GmbH Shell Tellus S2 M 32 Tellus S2 M 32 is recommended for equipment OEM Listed

Machinenfabrik Niehoff Schwabach GmbH Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for equipment OEM Listed

Machinenfabrik Niehoff Schwabach GmbH Shell Tellus S2 M 68 Tellus S2 M 68 is recommended for equipment OEM Listed

Machinenfabrik Niehoff Schwabach GmbH Shell Tellus S2 MA 46 Tellus S2 MA 46 is recommended for equipment OEM Listed

Machinenfabrik Niehoff Schwabach GmbH Shell Tellus S2 V 46 Tellus S2 V 46 is recommended for equipment OEM Listed

Machinenfabrik Niehoff Schwabach GmbH Shell Tellus S2 V 68 Tellus S2 V 68 is recommended for equipment OEM Listed

Machinenfabrik Niehoff Schwabach GmbH Shell Tellus S3 M 32 Tellus S3 M 32 is recommended for equipment OEM Listed

MAG Cincinnati Shell Tellus S2 M 46 Tellus S2 M 46 is approved for MAG gear cases OEM Approved

MAG Cincinnati Shell Tellus S2 M 68 Tellus S2 M 68 is approved for MAG gear cases OEM Approved

MAG Cincinnati Shell Tellus S2 MA 10 Tellus S2 MA 10 is approved for MAG gear cases OEM Approved

MAG Cincinnati Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved for MAG gear cases OEM Approved
29 OEM Shell Approvals Listed by OEM 30

OEM Product Approval Summary Approval Status

MAG Industrial Automation Systems Shell Tellus S2 M 32 Tellus S2 M 32 is recommended for MAG equipments OEM Listed

MAG Industrial Automation Systems Shell Tellus S2 M 32 Tellus S2 M 32 is approved for MAG equipment OEM Approved
MAG Industrial Automation Systems Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for MAG equipments OEM Listed

MAG Industrial Automation Systems Shell Tellus S2 M 46 Tellus S2 M 46 is approved for MAG equipment OEM Approved

MAG Industrial Automation Systems Shell Tellus S2 M 68 Tellus S2 M 68 is recommended for MAG equipments OEM Listed

MAG Industrial Automation Systems Shell Tellus S2 M 68 Tellus S2 M 68 is approved for MAG equipment OEM Approved

MAG Industrial Automation Systems Shell Tellus S2 V 32 Tellus S2 V 32 is recommended for MAG equipments OEM Listed

MAG Industrial Automation Systems Shell Tellus S2 V 32 Tellus S2 V 32 is approved for MAG equipment OEM Approved

MAG Industrial Automation Systems Shell Tellus S2 V 46 Tellus S2 V 46 is recommended for MAG equipments OEM Listed

MAG Industrial Automation Systems Shell Tellus S2 V 46 Tellus S2 V 46 is approved for MAG equipment OEM Approved

MAG Industrial Automation Systems Shell Tellus S2 V 68 Tellus S2 V 68 is recommended for MAG equipments OEM Listed

MAG Industrial Automation Systems Shell Tellus S2 V 68 Tellus S2 V 68 is approved for MAG equipment OEM Approved

MAG Industrial Automation Systems Shell Tellus S2 VA 46 Tellus S2 VA 46 is recommended for MAG equipments OEM Listed

MAG Industrial Automation Systems Shell Tellus S2 VA 46 Tellus S2 VA 46 is approved for MAG equipment OEM Approved

MAG Industrial Automation Systems Shell Tellus S3 M 32 Tellus S3 M 32 is recommended for MAG equipments OEM Listed

MAG Industrial Automation Systems Shell Tellus S3 M 32 Tellus S3 M 32 is approved for MAG equipment OEM Approved

MAG Industrial Automation Systems Shell Tellus S3 M 46 Tellus S3 M 46 is recommended for MAG equipments OEM Listed

MAG Industrial Automation Systems Shell Tellus S3 M 46 Tellus S3 M 46 is approved for MAG equipment OEM Approved

MAG Industrial Automation Systems Shell Tellus S3 M 68 Tellus S3 M 68 is recommended for MAG equipments OEM Listed

MAG Industrial Automation Systems Shell Tellus S3 M 68 Tellus S3 M 68 is approved for MAG equipment OEM Approved

MAG Industrial Automation Systems Shell Tellus S4 ME 32 Tellus S4 ME 32 is recommended for MAG equipments OEM Listed

MAG Industrial Automation Systems Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved for MAG equipment OEM Approved

MAG Industrial Automation Systems Shell Tellus S4 ME 46 Tellus S4 ME 46 is recommended for MAG equipments OEM Listed

MAG Industrial Automation Systems Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved for MAG equipment OEM Approved

MAG Industrial Automation Systems Shell Tellus S4 ME 68 Tellus S4 ME 68 is recommended for MAG equipments OEM Listed

MAG Industrial Automation Systems Shell Tellus S4 ME 68 Tellus S4 ME 68 is approved for MAG equipment OEM Approved

Makino Milling Machine Co.,Ltd Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) For all equipment previously approved OEM Re-approval

Makino Milling Machine Co.,Ltd Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) For all equipment previously approved OEM Re-approval

Makino Milling Machine Co.,Ltd Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For all equipment previously approved OEM Re-approval

Makino Milling Machine Co.,Ltd Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For all equipment previously approved OEM Re-approval

Makino Milling Machine Co.,Ltd Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For all equipment previously approved OEM Re-approval

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 M 32 Tellus S2 M 32 is recommended for Roll Shop Machinery OEM Listed

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for Roll Shop Machinery OEM Listed

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 MA 10 Tellus S2 MA 10 is approved / recommended (Re-Image) for equipment OEM Re-approval

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 MA 10 Tellus S2 MA 10 is recommended for Roll Shop Machinery OEM Listed

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 MA 32 Tellus S2 MA 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 MA 32 Tellus S2 MA 32 is recommended for Roll Shop Machinery OEM Listed

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 MA 46 Tellus S2 MA 46 is recommended for Roll Shop Machinery OEM Listed

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 V 32 Tellus S2 V 32 is recommended for Roll Shop Machinery OEM Listed
31 OEM Shell Approvals Listed by OEM 32

OEM Product Approval Summary Approval Status

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 V 46 Tellus S2 V 46 is recommended for Roll Shop Machinery OEM Listed
Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S2 VA 46 Tellus S2 VA 46 is recommended for Roll Shop Machinery OEM Listed

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S3 M 46 Tellus S3 M 46 is recommended for Roll Shop Machinery OEM Listed

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S3 V 46 Tellus S3 V 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S3 V 46 Tellus S3 V 46 is recommended for Roll Shop Machinery OEM Listed

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S3 V 68 Tellus S3 V 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Maschinenfabrik Herkules GmbH & Co. KG Shell Tellus S4 ME 68 Tellus S4 ME 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Matsuura Machinery Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Matsuura Machinery Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Matsuura Machinery Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Matsuura Machinery Shell Tellus S3 M 68 Tellus S3 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Maxon Lift Corp. Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Maxon Lift Corp. Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Maxon Lift Corp. Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Maxon Lift Corp. Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Maxon Lift Corp. Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Maxon Lift Corp. Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Meiki America Corp. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for Injection Moulding Machine OEM Re-approval

Meiki America Corp. Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for Injection Moulding Machine OEM Re-approval

Meiki America Corp. Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) for Injection Moulding Machine OEM Re-approval

Meiki America Corp. Shell Tellus S3 V 46 Tellus S3 V 46 is approved / recommended (Re-Image) for Injection Moulding Machine OEM Re-approval

Meiki America Corp. Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for Injection Moulding Machine OEM Re-approval

Metso Minerals Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for Metso equipments OEM Re-approval

Metso Minerals Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for Metso equipments OEM Re-approval

Metso Minerals Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for Metso equipments OEM Re-approval

Metso Minerals Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for Metso equipments OEM Re-approval

Metso Minerals Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for Metso equipments OEM Re-approval

Metso Minerals Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for Metso equipments OEM Re-approval

Metso Minerals Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for Metso equipments OEM Re-approval

Metso Minerals Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) for Metso equipments OEM Re-approval

Metso Minerals Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) for Metso equipments OEM Re-approval

Metso Minerals Shell Tellus S3 M 68 Tellus S3 M 68 is approved / recommended (Re-Image) for Metso equipments OEM Re-approval

MingYang Wind Turbine Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved Mingyang 1.5 MW Model OEM Approved

Minster Machine Company Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Minster Machine Company Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Minster Machine Company Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval
33 OEM Shell Approvals Listed by OEM 34

OEM Product Approval Summary Approval Status

Minster Machine Company Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Minster Machine Company Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval
Mitsubishi Plastic Technology Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Mitsubishi-Hitachi Metals Machinery, Inc. Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

Mitsubishi-Hitachi Metals Machinery, Inc. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Mitsubishi-Hitachi Metals Machinery, Inc. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Mitsubishi-Hitachi Metals Machinery, Inc. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Mitsubishi-Hitachi Metals Machinery, Inc. Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Mitsui High Tech Inc. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Mitsui High Tech Inc. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Mitsui High Tech Inc. Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Mitsui High Tech Inc. Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Mitsui High Tech Inc. Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Mitsui High Tech Inc. Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Miyano Machinery Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

Miyano Machinery Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Miyano Machinery Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Miyano Machinery Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Miyano Machinery Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Mori-Seiki Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Mori-Seiki Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Mori-Seiki Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

MTS Systems Shell Tellus S2 M 46 Tellus S2 M 46 is approved for use in high-performance servo-hydraulic test equipment OEM Approved

MTS Systems Shell Tellus S2 M 46 Tellus S2 M 46 is approved for use in MTS Series 252 Servovalves OEM Approved

Mueller Weingarten Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Mueller Weingarten Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved / recommended (Re-Image) For all equipment previously approved OEM Re-approval

Nachi-Fujikoshi Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Nachi-Fujikoshi Shell Tellus S4 ME 68 Tellus S4 ME 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Nakamura Tome Precision Industry Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

National Air Vibrator Company Shell Tellus S2 M 100 Tellus S2 M 100 is recommended for equipment OEM Listed

National Air Vibrator Company Shell Tellus S2 M 22 Tellus S2 M 22 is recommended for equipment OEM Listed

National Air Vibrator Company Shell Tellus S2 M 32 Tellus S2 M 32 is recommended for equipment OEM Listed

National Air Vibrator Company Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for equipment OEM Listed

National Air Vibrator Company Shell Tellus S3 M 68 Tellus S3 M 68 is recommended for equipment OEM Listed

Niigata Engineering Co, Ltd Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Nippon Pusnes Shell Tellus S2 M 46 Tellus S2 M 46 is approved for Deck Machinery for Ships OEM Approved

Nippon Pusnes Shell Tellus S2 V 46 Tellus S2 V 46 is approved for Deck Machinery for Ships OEM Approved

Nissei Plastic Industrial Co., Ltd. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Nissei Plastic Industrial Co., Ltd. Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Nissei Urawa Machine Tools Co, Ltd Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Nissin Machine Works Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for Machine Tool OEM Re-approval

Nissin Machine Works Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for Machine Tool OEM Re-approval
35 OEM Shell Approvals Listed by OEM 36

OEM Product Approval Summary Approval Status

Nord Gear Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Nord Gear Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval
Nord Gear Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Nord Gear Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Nord Gear Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Nord Gear Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Nordex, Incorporated Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Ogawa Iron Works Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for Machine Tool OEM Re-approval

Ogawa Iron Works Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for Machine Tool OEM Re-approval

Okuma Corporation Shell Tellus S3 M 32 Tellus S3 M 32 is approved for equipment OEM Approved

Okuma Corporation Shell Tellus S3 M 68 Tellus S3 M 68 is approved for equipment OEM Approved

Oleo Buffers (Shanghai) Co., Ltd. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

O-M, Ltd Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

O-M, Ltd Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

O-M, Ltd Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

O-M, Ltd Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

O-M, Ltd Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

O-M, Ltd Shell Tellus S3 M 100 Tellus S3 M 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

O-M, Ltd Shell Tellus S3 M 22 Tellus S3 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

O-M, Ltd Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

O-M, Ltd Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

O-M, Ltd Shell Tellus S3 M 68 Tellus S3 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

O-M, Ltd Shell Tellus S4 ME 22 Tellus S4 ME 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

O-M, Ltd Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

O-M, Ltd Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

O-M, Ltd Shell Tellus S4 ME 68 Tellus S4 ME 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Ortlinghaus Products Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) PRI re-approval OEM Re-approval

Ortlinghaus Products Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) PRI re-approval OEM Re-approval

Ortlinghaus Products Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) PRI re-approval OEM Re-approval

Ortlinghaus Products Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) PRI re-approval OEM Re-approval

Ortlinghaus Products Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) PRI re-approval OEM Re-approval

Ortlinghaus Products Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) PRI re-approval OEM Re-approval

Ortlinghaus Products Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) PRI re-approval OEM Re-approval

Ortlinghaus Products Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) PRI re-approval OEM Re-approval

Ortlinghaus Products Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) PRI re-approval OEM Re-approval

Ortlinghaus Products Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) PRI re-approval OEM Re-approval

Pequea Machine, INC. Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Pequea Machine, INC. Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Pequea Machine, INC. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Pequea Machine, INC. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Pequea Machine, INC. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Perma Schmiersysteme Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval
37 OEM Shell Approvals Listed by OEM 38

OEM Product Approval Summary Approval Status

Perma Schmiersysteme Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Petzholdt-Heidenauer Machinen und Anlagenbau International GmbH Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval
Petzholdt-Heidenauer Machinen und Anlagenbau International GmbH Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Petzholdt-Heidenauer Machinen und Anlagenbau International GmbH Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

POLYSIUS AG Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

POLYSIUS AG Shell Tellus S2 M 32 Tellus S2 M 32 is recommended For Equipment OEM Listed

POLYSIUS AG Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

POLYSIUS AG Shell Tellus S2 M 46 Tellus S2 M 46 is recommended For Equipment OEM Listed

POLYSIUS AG Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

POLYSIUS AG Shell Tellus S2 M 68 Tellus S2 M 68 is recommended For Equipment OEM Listed

POLYSIUS AG Shell Tellus S2 MA 32 Tellus S2 MA 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

POLYSIUS AG Shell Tellus S2 MA 32 Tellus S2 MA 32 is recommended For Equipment OEM Listed

POLYSIUS AG Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

POLYSIUS AG Shell Tellus S2 MA 46 Tellus S2 MA 46 is recommended For Equipment OEM Listed

REFORM Maschinenfabrik Adolf Rabenseifner GmbH & Co. KG Shell Tellus S2 M 32 Tellus S2 M 32 is recommended For Equipment OEM Listed

REFORM Maschinenfabrik Adolf Rabenseifner GmbH & Co. KG Shell Tellus S2 M 46 Tellus S2 M 46 is recommended For Equipment OEM Listed

REFORM Maschinenfabrik Adolf Rabenseifner GmbH & Co. KG Shell Tellus S2 M 68 Tellus S2 M 68 is recommended For Equipment OEM Listed

Reishauer AG Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Renk AG Shell Tellus S2 MA 46 Tellus S2 MA 46 is recommended for Renk Gear and Hydraulic systems OEM Listed

Rexnord Industries, LLC Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

Rexnord Industries, LLC Shell Tellus S2 M 100 Tellus S2 M 100 is approved for Falk (Rexnord) units OEM Approved

Rexnord Industries, LLC Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Rexnord Industries, LLC Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Rexnord Industries, LLC Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Rexnord Industries, LLC Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Rexnord Industries, LLC Shell Tellus S2 M 68 Tellus S2 M 68 is approved for Falk (Rexnord) units OEM Approved

Robinson Industries, Inc. Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Robinson Industries, Inc. Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Robinson Industries, Inc. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Robinson Industries, Inc. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Robinson Industries, Inc. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Rollstar AG Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For all equipment previously approved OEM Re-approval

Rollstar AG Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) For all equipment previously approved OEM Re-approval

Rotor Group Ltd Shell Tellus S2 V 15 Tellus S2 V 15 is recommended Rotor (UK) Ltd E Box Inline Helical Gearboxes OEM Listed

Rotor Group Ltd Shell Tellus S2 V 15 Tellus S2 V 15 is recommended Rotor (UK) Ltd E Box Inline Gearboxes OEM Listed

Sandvik Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

Sandvik Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

Sandvik Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

Sandvik Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For equipment previously approved OEM Re-approval

Sanjo Machine Works Ltd. Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for Broaching Machines OEM Re-approval

Sanjo Machine Works Ltd. Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for Broaching Machines OEM Re-approval

Sanjo Machine Works Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for Broaching Machines OEM Re-approval
39 OEM Shell Approvals Listed by OEM 40

OEM Product Approval Summary Approval Status

Sanjo Machine Works Ltd. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for Broaching Machines OEM Re-approval

Sanjo Machine Works Ltd. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for Broaching Machines OEM Re-approval
Sanjo Machine Works Ltd. Shell Tellus S4 ME 22 Tellus S4 ME 22 is approved / recommended (Re-Image) for Broaching Machines OEM Re-approval

Sanjo Machine Works Ltd. Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for Broaching Machines OEM Re-approval

Sanjo Machine Works Ltd. Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for Broaching Machines OEM Re-approval

Sanjo Machine Works Ltd. Shell Tellus S4 ME 68 Tellus S4 ME 68 is approved / recommended (Re-Image) for Broaching Machines OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S3 M 100 Tellus S3 M 100 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S3 M 100 Tellus S3 M 100 is approved For equipment OEM Approved

SANY Heavy Industry Co., Ltd Shell Tellus S3 M 22 Tellus S3 M 22 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S3 M 22 Tellus S3 M 22 is approved For equipment OEM Approved

SANY Heavy Industry Co., Ltd Shell Tellus S3 M 32 Tellus S3 M 32 is approved For equipment OEM Approved

SANY Heavy Industry Co., Ltd Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S3 M 46 Tellus S3 M 46 is approved For equipment OEM Approved

SANY Heavy Industry Co., Ltd Shell Tellus S3 M 68 Tellus S3 M 68 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

SANY Heavy Industry Co., Ltd Shell Tellus S3 M 68 Tellus S3 M 68 is approved For equipment OEM Approved

SANY Heavy Industry Co., Ltd Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved / recommended (Re-Image) for Sany Heavy Equipments OEM Re-approval

Schuler Hydroforming GmbH & Co. KG Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Schuler Hydroforming GmbH & Co. KG Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Schuler Hydroforming GmbH & Co. KG Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Schuler Hydroforming GmbH & Co. KG Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Schuler Hydroforming GmbH & Co. KG Shell Tellus S2 MA 32 Tellus S2 MA 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Schuler Hydroforming GmbH & Co. KG Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Schuler Hydroforming GmbH & Co. KG Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Schuler Hydroforming GmbH & Co. KG Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Schuler Hydroforming GmbH & Co. KG Shell Tellus S3 M 68 Tellus S3 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Shafer Valve Company Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Shafer Valve Company Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Shafer Valve Company Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Shafer Valve Company Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Shafer Valve Company Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Shafer Valve Company Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval
41 OEM Shell Approvals Listed by OEM 42

OEM Product Approval Summary Approval Status

Shanghai Zhenhua Port Machinery Co. Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Shanghai Zhenhua Port Machinery Co. Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved ZPMC Container Cranes Machinery OEM Approved
Shanghai Zhenhua Port Machinery Co. Ltd. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Shanghai Zhenhua Port Machinery Co. Ltd. Shell Tellus S2 M 46 Tellus S2 M 46 is approved ZPMC Container Cranes Machinery OEM Approved

Shanghai Zhenhua Port Machinery Co. Ltd. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Shanghai Zhenhua Port Machinery Co. Ltd. Shell Tellus S2 V 32 Tellus S2 V 32 is approved ZPMC Container Cranes Machinery OEM Approved

Shanghai Zhenhua Port Machinery Co. Ltd. Shell Tellus S2 V 46 Tellus S2 V 46 is approved ZPMC Container Cranes Machinery OEM Approved

Sharpe Mixers Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Sharpe Mixers Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Sharpe Mixers Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Sharpe Mixers Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Sharpe Mixers Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Sharpe Mixers Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Shaw-Box Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Shaw-Box Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Shaw-Box Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Shaw-Box Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Shaw-Box Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Siemens AG Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Siemens AG Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Silvan Australia Pty. Ltd. Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Silvan Australia Pty. Ltd. Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Silvan Australia Pty. Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Silvan Australia Pty. Ltd. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Silvan Australia Pty. Ltd. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Sinovel Wind Co., Ltd. Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved for Snovel Hydraulic System OEM Approved

Skoda Shell Tellus S2 M 32 Tellus S2 M 32 is recommended for Skoda Machine Tool OEM Listed

Skoda Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Skoda Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for Skoda Machine Tool OEM Listed

Skoda Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Skoda Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

SMS Meer GmbH Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Meer GmbH Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Meer GmbH Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Meer GmbH Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Meer GmbH Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Meer GmbH Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Meer GmbH Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Meer GmbH Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Siemag AG Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Siemag AG Shell Tellus S2 M 22 Tellus S2 M 22 is recommended For Equipment OEM Listed

SMS Siemag AG Shell Tellus S2 M 22 Tellus S2 M 22 is recommended for SMS Group Equipment OEM Listed
43 OEM Shell Approvals Listed by OEM 44

OEM Product Approval Summary Approval Status

SMS Siemag AG Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Siemag AG Shell Tellus S2 M 32 Tellus S2 M 32 is recommended For Equipment OEM Listed
SMS Siemag AG Shell Tellus S2 M 32 Tellus S2 M 32 is recommended for SMS Group Equipment OEM Listed

SMS Siemag AG Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Siemag AG Shell Tellus S2 M 46 Tellus S2 M 46 is recommended For Equipment OEM Listed

SMS Siemag AG Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for SMS Group Equipment OEM Listed

SMS Siemag AG Shell Tellus S3 M 22 Tellus S3 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Siemag AG Shell Tellus S3 M 22 Tellus S3 M 22 is recommended For Equipment OEM Listed

SMS Siemag AG Shell Tellus S3 M 22 Tellus S3 M 22 is recommended for SMS Group Equipment OEM Listed

SMS Siemag AG Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Siemag AG Shell Tellus S3 M 32 Tellus S3 M 32 is recommended For Equipment OEM Listed

SMS Siemag AG Shell Tellus S3 M 32 Tellus S3 M 32 is recommended for SMS Group Equipment OEM Listed

SMS Siemag AG Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Siemag AG Shell Tellus S3 M 46 Tellus S3 M 46 is recommended For Equipment OEM Listed

SMS Siemag AG Shell Tellus S3 M 46 Tellus S3 M 46 is recommended for SMS Group Equipment OEM Listed

SMS Siemag AG Shell Tellus S4 ME 22 Tellus S4 ME 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Siemag AG Shell Tellus S4 ME 22 Tellus S4 ME 22 is recommended For Equipment OEM Listed

SMS Siemag AG Shell Tellus S4 ME 22 Tellus S4 ME 22 is recommended for SMS Group Equipment OEM Listed

SMS Siemag AG Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Siemag AG Shell Tellus S4 ME 32 Tellus S4 ME 32 is recommended For Equipment OEM Listed

SMS Siemag AG Shell Tellus S4 ME 32 Tellus S4 ME 32 is recommended for SMS Group Equipment OEM Listed

SMS Siemag AG Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

SMS Siemag AG Shell Tellus S4 ME 46 Tellus S4 ME 46 is recommended For Equipment OEM Listed

SMS Siemag AG Shell Tellus S4 ME 46 Tellus S4 ME 46 is recommended for SMS Group Equipment OEM Listed

Stanley Hydraulic Tools Shell Tellus S2 V 100 Tellus S2 V 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Stanley Hydraulic Tools Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Stanley Hydraulic Tools Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Stanley Hydraulic Tools Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Stanley Hydraulic Tools Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Stanley Hydraulic Tools Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Star Micronics Co., Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for use in Star Micronics Machine Tools OEM Re-approval

Star Micronics Co., Ltd. Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for use in Star Micronics Machine Tools OEM Re-approval

Stolle Machinery Company, LLC Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Stolle Machinery Company, LLC Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Stolle Machinery Company, LLC Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Stolle Machinery Company, LLC Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Stolle Machinery Company, LLC Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Stork B.V. Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for Stork Plastic Machinery, Injection Molding Machinery OEM Listed

Storti International S.p.A. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Stromag AG Shell Tellus S2 V 100 Tellus S2 V 100 is recommended For Equipment OEM Listed

Stromag AG Shell Tellus S2 V 32 Tellus S2 V 32 is recommended For Equipment OEM Listed

Stromag AG Shell Tellus S2 V 46 Tellus S2 V 46 is recommended For Equipment OEM Listed

45 OEM Shell Approvals Listed by OEM 46

OEM Product Approval Summary Approval Status

Stromag AG Shell Tellus S2 V 68 Tellus S2 V 68 is recommended For Equipment OEM Listed

Sumitomo (SHI) Demag Plastics Machinery GmbH Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval
Sumitomo (SHI) Demag Plastics Machinery GmbH Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Sumitomo (SHI) Demag Plastics Machinery GmbH Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Sumitomo (SHI) Demag Plastics Machinery GmbH Shell Tellus S3 M 68 Tellus S3 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Sumitomo (SHI) Demag Plastics Machinery GmbH Shell Tellus S3 M 68 Tellus S3 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Sumitomo Heavy Industries Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for equipment OEM Re-approval

Sumitomo Heavy Industries Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Sumitomo Heavy Industries Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Sumitomo Heavy Industries Shell Tellus S2 V 15 Tellus S2 V 15 is approved / recommended (Re-Image) for equipment OEM Re-approval

Technische Antriebselemente GmbH Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Technische Antriebselemente GmbH Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Technische Antriebselemente GmbH Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Technische Antriebselemente GmbH Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Technische Antriebselemente GmbH Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Technische Antriebselemente GmbH Shell Tellus S3 M 46 Tellus S3 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Technische Antriebselemente GmbH Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Terex Corporation Shell Tellus S3 V 46 Tellus S3 V 46 is approved Terex France Reach Stackers OEM Approved

Terex Corporation Shell Tellus S3 V 68 Tellus S3 V 68 is approved Terex France Reach Stackers OEM Approved

Terex Corporation Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved Terex France Reach Stackers OEM Approved

The Robbins Company Shell Tellus S2 M 32 Tellus S2 M 32 is recommended for Robbins Equipment OEM Listed

The Robbins Company Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for Robbins Equipment OEM Listed

The Robbins Company Shell Tellus S2 M 68 Tellus S2 M 68 is recommended for Robbins Equipment OEM Listed

The Robbins Company Shell Tellus S2 V 32 Tellus S2 V 32 is recommended for Robbins Equipment OEM Listed

The Robbins Company Shell Tellus S2 V 46 Tellus S2 V 46 is recommended for Robbins Equipment OEM Listed

The Robbins Company Shell Tellus S2 V 68 Tellus S2 V 68 is recommended for Robbins Equipment OEM Listed

Toshiba Corporation Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Toshiba Corporation Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Toshiba Corporation Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for use in Injection Molding Machines OEM Re-approval

Toshiba Corporation Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Toshiba Corporation Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Toshiba Corporation Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Toshiba Corporation Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Toyo Advanced Technologies Co, Ltd Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Toyo Advanced Technologies Co, Ltd Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for injection Moulding OEM Re-approval

Toyo Advanced Technologies Co, Ltd Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Toyo Advanced Technologies Co, Ltd Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Toyo Advanced Technologies Co, Ltd Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Troester GmbH & Co. KG Shell Tellus S2 M 46 Tellus S2 M 46 is recommended For equipment OEM Listed

Troester GmbH & Co. KG Shell Tellus S2 MA 46 Tellus S2 MA 46 is recommended For equipment OEM Listed

Troester GmbH & Co. KG Shell Tellus S4 ME 46 Tellus S4 ME 46 is recommended For equipment OEM Listed

Tsugami Corporation Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for equipment OEM Re-approval
47 OEM Shell Approvals Listed by OEM 48

OEM Product Approval Summary Approval Status

Tsugami Corporation Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Tsugami Corporation Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval
Tsugami Corporation Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Tsugami Corporation Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Tuthill Vacuum & Blower Systems Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Tuthill Vacuum & Blower Systems Shell Tellus S2 M 100 Tellus S2 M 100 is recommended for Tuthill M-D Pneumatics™ Rotary Blowers and Vacuum Boosters OEM Listed

Tuthill Vacuum & Blower Systems Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Tuthill Vacuum & Blower Systems Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Tuthill Vacuum & Blower Systems Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Tuthill Vacuum & Blower Systems Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Tuthill Vacuum & Blower Systems Shell Tellus S2 M 68 Tellus S2 M 68 is recommended for Tuthill M-D Pneumatics™ Rotary Blowers and Vacuum Boosters OEM Listed

Var-Spe S.p.A. Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Var-Spe S.p.A. Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Var-Spe S.p.A. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Var-Spe S.p.A. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Var-Spe S.p.A. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Var-Spe S.p.A. Shell Tellus S2 V 22 Tellus S2 V 22 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Var-Spe S.p.A. Shell Tellus S2 V 46 Tellus S2 V 46 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Var-Spe S.p.A. Shell Tellus S2 V 68 Tellus S2 V 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Vestas Wind Systems A/S Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved for Vestas equipments previously approved OEM Approved

Veth Motoren BV Shell Tellus S2 V 100 Tellus S2 V 100 is approved For Equipment OEM Approved

Veth Motoren BV Shell Tellus S2 V 15 Tellus S2 V 15 is approved For Equipment OEM Approved

Veth Motoren BV Shell Tellus S2 V 22 Tellus S2 V 22 is approved For Equipment OEM Approved

Veth Motoren BV Shell Tellus S2 V 32 Tellus S2 V 32 is approved For Equipment OEM Approved

Veth Motoren BV Shell Tellus S2 V 46 Tellus S2 V 46 is approved For Equipment OEM Approved

Veth Motoren BV Shell Tellus S2 V 68 Tellus S2 V 68 is approved For Equipment OEM Approved

Voith Industrial Services GmbH & Co. KG Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Voith Industrial Services GmbH & Co. KG Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Voith Industrial Services GmbH & Co. KG Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Voith Industrial Services GmbH & Co. KG Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Voith Industrial Services GmbH & Co. KG Shell Tellus S4 ME 46 Tellus S4 ME 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Voith Industrial Services GmbH & Co. KG Shell Tellus S4 ME 46 Tellus S4 ME 46 is recommended for VORECON Variable Speed Planetary Gear OEM Listed

Wagner Engineering Ltd. Shell Tellus S2 M 100 Tellus S2 M 100 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Wagner Engineering Ltd. Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Wagner Engineering Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Wagner Engineering Ltd. Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Wagner Engineering Ltd. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Waida Manufacturing Co., Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for Machine Tool OEM Re-approval

Waida Manufacturing Co., Ltd. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for Machine Tool OEM Re-approval

Waldrich Coburg (Switzerland) Shell Tellus S2 M 22 Tellus S2 M 22 is approved / recommended (Re-Image) for equipment OEM Re-approval

Waldrich Coburg (Switzerland) Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Waldrich Coburg (Switzerland) Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for equipment OEM Re-approval
49 OEM Shell Approvals Listed by OEM 50

OEM Product Approval Summary Approval Status

Waldrich Coburg (Switzerland) Shell Tellus S2 MA 10 Tellus S2 MA 10 is approved / recommended (Re-Image) for equipment OEM Re-approval

Waldrich Coburg (Switzerland) Shell Tellus S2 MA 32 Tellus S2 MA 32 is approved / recommended (Re-Image) for equipment OEM Re-approval
Waldrich Coburg (Switzerland) Shell Tellus S2 MA 46 Tellus S2 MA 46 is approved / recommended (Re-Image) for equipment OEM Re-approval

Waldrich Coburg (Switzerland) Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Warren Rupp Shell Tellus S2 V 32 Tellus S2 V 32 is approved for Warren-Rupp Pumps, Model SMA3, 6AM1 OEM Approved

Wartsila Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Wartsila Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Wemhöner Surface Technologies GmbH & Co. KG Shell Tellus S2 M 46 Tellus S2 M 46 is recommended for Conveyor Chains, Racks and Roller Bearings OEM Listed

XCMG Excavator Machinery Co., LTD Shell Tellus S2 M 32 Tellus S2 M 32 is approved for XCMG Excavators OEM Approved

XCMG Excavator Machinery Co., LTD Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

XCMG Excavator Machinery Co., LTD Shell Tellus S2 M 46 Tellus S2 M 46 is approved for XCMG Excavators OEM Approved

XCMG Excavator Machinery Co., LTD Shell Tellus S2 V 32 Tellus S2 V 32 is approved for XCMG Excavators OEM Approved

XCMG Excavator Machinery Co., LTD Shell Tellus S2 V 46 Tellus S2 V 46 is approved for XCMG Excavators OEM Approved

XCMG Excavator Machinery Co., LTD Shell Tellus S4 VX 32 Tellus S4 VX 32 is approved for XCMG Excavators OEM Approved

Xiamen Engineering Machinery Co Ltd Shell Tellus S2 M 46 Tellus S2 M 46 is approved for XGMA Machines OEM Approved

Xiamen Engineering Machinery Co Ltd Shell Tellus S2 M 46 Tellus S2 M 46 is approved for XGMA Roller and Grader OEM Approved

Xiamen Engineering Machinery Co Ltd Shell Tellus S2 M 68 Tellus S2 M 68 is approved for XGMA Roller and Grader OEM Approved

Xuzhou XCG John Deere Manufacturing Co., Ltd Shell Tellus S2 M 46 Tellus S2 M 46 is approved / recommended (Re-Image) for all equipment previously approved OEM Re-approval

Yamazaki Giken Co., Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Yamazaki Giken Co., Ltd. Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Yamazaki Mazak Seiko Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for equipment OEM Re-approval

Yamazaki Mazak Seiko Shell Tellus S2 M 68 Tellus S2 M 68 is approved / recommended (Re-Image) for equipment OEM Re-approval

Yasuda Precision Tools Ltd. Shell Tellus S2 M 32 Tellus S2 M 32 is approved / recommended (Re-Image) for YASDA Precision Tools OEM Re-approval

Yasuda Precision Tools Ltd. Shell Tellus S2 V 32 Tellus S2 V 32 is approved / recommended (Re-Image) for YASDA Precision Tools OEM Re-approval

Yasuda Precision Tools Ltd. Shell Tellus S3 M 32 Tellus S3 M 32 is approved / recommended (Re-Image) for YASDA Precision Tools OEM Re-approval

Yasuda Precision Tools Ltd. Shell Tellus S3 V 32 Tellus S3 V 32 is approved / recommended (Re-Image) for YASDA Precision Tools OEM Re-approval

Yasuda Precision Tools Ltd. Shell Tellus S4 ME 32 Tellus S4 ME 32 is approved / recommended (Re-Image) for YASDA Precision Tools OEM Re-approval

Zetor Shell Tellus S2 MA 32 Tellus S2 MA 32 is approved / recommended (Re-Image) For Equipment OEM Re-approval

Zetor Shell Tellus S2 MA 32 Tellus S2 MA 32 is approved / recommended (Re-Image) for equipment OEM Re-approval