Scribd Logo
Upload

Welcome to Scribd!

  • 167 views

    Nihon Kohden Mek 6318K, Mek 8222K, Mek 7222K, Mek 8118K, MEK 6108 Reagents

    Uploaded by

    amor kermaya
    The document provides information on reagents used for blood cell analysis on haematology analyzers. It lists reagents including a diluent, two lysing reagents, and a cleaning reagent. These reagents are used to dilute and prepare whole blood samples, lyse red blood cells, and clean the analyzer. The diluent maintains stability of red and white blood cells during counting, while the lysing reagents are used to obtain measurements of hemoglobin, count, and differentiate white blood cells. Precautions for use and storage of reagents are also described.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Nihon Kohden Mek 6318K, Mek 8222K, Mek 7222K, Mek 8118K, MEK 6108 Reagents

    Uploaded by

    amor kermaya
    167 views1 page
    The document provides information on reagents used for blood cell analysis on haematology analyzers. It lists reagents including a diluent, two lysing reagents, and a cleaning reagent. These reagents are used to dilute and prepare whole blood samples, lyse red blood cells, and clean the analyzer. The diluent maintains stability of red and white blood cells during counting, while the lysing reagents are used to obtain measurements of hemoglobin, count, and differentiate white blood cells. Precautions for use and storage of reagents are also described.

    Original Title

    8-522

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides information on reagents used for blood cell analysis on haematology analyzers. It lists reagents including a diluent, two lysing reagents, and a cleaning reagent. These reagents are used to dilute and prepare whole blood samples, lyse red blood cells, and clean the analyzer. The diluent maintains stability of red and white blood cells during counting, while the lysing reagents are used to obtain measurements of hemoglobin, count, and differentiate white blood cells. Precautions for use and storage of reagents are also described.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    167 views1 page

    Nihon Kohden Mek 6318K, Mek 8222K, Mek 7222K, Mek 8118K, MEK 6108 Reagents

    Uploaded by

    amor kermaya
    The document provides information on reagents used for blood cell analysis on haematology analyzers. It lists reagents including a diluent, two lysing reagents, and a cleaning reagent. These reagents are used to dilute and prepare whole blood samples, lyse red blood cells, and clean the analyzer. The diluent maintains stability of red and white blood cells during counting, while the lysing reagents are used to obtain measurements of hemoglobin, count, and differentiate white blood cells. Precautions for use and storage of reagents are also described.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    NIHON KOHDEN MEK 6318K, MEK 8222K, MEK 7222K, MEK

    8118K, MEK 6108 reagents


    REF 8-522 DILUENT NK (20 L)
    8-523 LYSING REAGENT NK 3 (1 L)
    8-524 LYSING REAGENT NK 5 (1 L)
    8-525 CLEANING REAGENT NK (5 L)

    IVD

    SUMMARY UTILISATION (For In Vitro Diagnostic use)


    The blood counters use the impedance technology to measure the DILUENT NK is designed for diluting the whole blood prior to counting
    number of cells in a diluted blood sample which pass through an aperture and sizing of RBC/WBC/PLT. It maintains stability RBC/PLT during
    located between two electrodes where a constant electrical current is counting.
    applied.
    The dilution is done with an isotonic solution which is a conductor and CLEANING REAGENT NK is designed to remove protein
    does not lyse the blood cells. contaminants from the measurement system analyser after each
    The conductivity of the isotonic diluent allows the passage of the blood sample analysis.
    electrical current between the two electrodes. When a particle is LYSING REAGENT NK 3 / NK 5: Lysing agent to obtain the
    aspirated through the micro-orifice, it moves its own volume of
    electrolyte. This applies a modification of the resistance between both measurement of the haemoglobin, counting and differentiation of the
    electrodes and generates an electrical pulse. The amplitude is directly white blood cells.
    proportional to the volume of the particle. Use in combination with the diluent, this reagent lyses the red blood
    Two separate dilutions are prepared for WBC/HGB and for RBC/PLT. cells and protects the state of the leukocytes to permit the
    differentiation in three populations (lymphocytes, monocytes,
    COLLECTION AND STORAGE granulocytes).
    Diluent, lysing reagent and cleaning reagent are the functional set to
    NIHON KOHDEN MEK 6318K, MEK 8222K, MEK 7222K, MEK 8118K, perform blood sample analysis on haematology analyser.
    MEK 6108 are fully automated analysers performing haematological COMPONENTS
    analysis on whole blood collected on EDTA tubes. The ratio between
    EDTA and whole blood must be between 1 to 2 mg per ml of blood. DILUENT NK LYSING REAGENT NK 3
    The samples should be used at room temperature no longer that 4 sodium chloride < 5 g/l oxalates < 25 g/l
    hours after collection. If the analysis can’t be done in the time, the organic buffer < 2 g/l dodecyltrimethyl-
    samples should be stored at 4°C. sodium sulphate < 10 g/l ammoniumbromide 3.1-4.0 g/l
    K EDTA < 0.5 g/l bretol < 2 g/l
    preservative < 0.05 g/l potassium cyanide 0.4 g/l
    UTILISATION
    LYSING REAGENT NK 5 CLEANING REAGENT NK
    Before running the analysis, the sample should be gently mixed. sodium dodecyl sodium hypochlorite 14 g/l
    Open the tube, place it in the sampling port and press the start key. sulphate < 1.5 g/l
    inorganic buffer < 2.5 g/l
    CONSERVATION AND SHELF LIFE sodium chloride < 8 g/l
    preservative < 1 g/l
    The reagents must me stored between 18°C and 30°C and used before sodium hydroxide 1M < 6 g/l
    the expiry date indicated on the label. WASTE TREATMENT
    Chemical residues, in general, are included into special waste.
    Disposing of the latter is regulated by appropriate laws and
    ordinances. We recommend contacting the appropriate authorities, or
    REFERENCE waste disposal enterprises that will advise you on how to dispose
    special waste of.
    Refer to the Operator manual for the analysers. PRECAUTIONS
    For In vitro diagnostic use.
    For professional use only.
    Wear protective equipment.
    Avoid release to sewage system or to environment.
    For further information please refer to Material Safety Data Sheet.

    NAME AND ADDRESS OF THE MANUFACTURER

    PZ CORMAY S.A.
    Wiosenna 22
    05-092 Łomianki, Poland
    tel.: +48 (0) 22 751 79 10
    fax: +48 (0) 22 751 79 14
    http://www.cormay.pl

    11/13/11/13 Page 1 of 1

    You might also like