RELIABLE STORAGE &

EMBEDDED IOT SOLUTIONS

INDUSTRY • AUTOMOTIVE • SECURITY

NETWORKING & COMMUNICATION • IOT
STORE. SECURE. TRUST.

Data is the fuel of the future and is driving global growth and
change. Swissbit takes care of data by storing and protecting
data reliably. As a leader in industrial storage and embedded IoT
(Internet of Things) solutions, Swissbit drives the development
of demanding industrial and IoT applications to make our lives
easier, safer, and more comfortable.

More than 5,000 customers around the world including Fortune 500
companies and the world‘s leading OEMs already rely on Swissbit for
their critical data storage and security requirements. With over 25 years
of experience in the development of removable and embedded storage
and embedded IoT solutions for the most demanding markets, coupled
with a trusted global distribution and support network, Swissbit is
firmly established as a global innovation leader in storage and security
products for high-reliability solutions.

MADE IN GERMANY

New technological trends are driving the demand for highly integrated solutions and advanced packaging
technologies. Digitization will increase the demand for industrial memory products for industrial, tele-
communications, automotive (e.g. autonomous driving), medical, and fiscal applications. In addition,
the growing connectivity of devices in the Internet of Things means that the demands on the protection
of data and devices, and thus the demand for smart security products, will increase massively. Swissbit
has prepared for this with new state-of-the-art production capacities at the new plant in Berlin, Germany.

Development Qualification Supply Chain

Service

Conception Verification Production & Test

CORPORATE PROFILE

Established Headquarters
1992 – 2000 as SIEMENS AG Swissbit AG: Bronschhofen (St. Gallen,
Swissbit AG was formed in 2001 through Lake Constance area)
a management buyout
Subsidiaries
Financial Strength Germany, USA, Japan, Taiwan
Privately held company, equity ratio > 60%
R & D sites
CAGR 2009-2018 Switzerland, Germany and USA
Continuous positive annual growth
Production Site
Berlin, Germany

2
CONTENT

OUR PRODUCTS AND TECHNOLOGIES

NAND FLASH PRODUCTS SECURITY PRODUCTS SYSTEM IN PACKAGE

NAND flash products 20 Security products 42 Advanced packaging,

PCIe SSD modules 22 Security editions 44 assembly & test solutions 46

2.5“ SATA SSDs 24

SATA modules 26

SATA modules 3D NAND 29

CFAST TM Cards 30

CompactFlashTM 32

SD Memory Cards 34

microSD Cards 36

USB products 38

Managed NAND 40

3
 APPLICATIONS

INDUSTRY

EMBEDDED PRODUCTS

Swissbit's embedded memory and high-quality standards, each product

storage solutions are the perfect fit for undergoes thorough functional testing
demanding embedded applications. before being released for shipment.
They offer the highest reliability and The broad portfolio with different NAND
quality. Swissbit's strategic cooperation technologies and industry-dedicated
with suppliers allows for long-term features guarantee the right solution for
availability of products. To guarantee each embedded use case.

4
Memory and non-volatile storage solutions
for embedded applications must provide TYPICAL APPLICATIONS:

reliable operation even in the most extreme • Industrial automation

conditions: temperature, shock, and vibration. • Energy distribution
• Energy consumption
As such, both the qualification cycle and the
• Smart grid
support life cycle needed for these products • Infotainment
by far exceed those of devices designed for • Healthcare
typical consumer applications. • Transportation
• Aerospace and defense

APPLICATIONS 5
 APPLICATIONS

IOT

IOT PRODUCTS

Memory and non-volatile storage so- optimized network usage, and format
lutions for edge computing must work conversion. Stored data as well as
uninterrupted and with a long service Internet of Things (IoT) devices must
interval. Edge computing systems ex- be protected against manipulation or
perience wide temperature ranges, shock, theft. The storage product must provide
and vibration. a high bandwidth for small block write
Remotely installed sensors, actuators operations.
and communication channels need to The life time status of the storage device
have local storage for pre-processing must be controllable by local maintenance
of big data, temporary storage for routines.

6
Swissbit provides the perfect rugged and reliable
small form factor storage products for edge TYPICAL APPLICATIONS:
computing systems. • Industrial connectivity
The Swissbit SD, microSD, e.MMC, and USB products • Manufacturing / IIoT
offer the right storage capacity, longevity, and • Remote sensors
• Remote actuators
operation temperature range for remotely in- • Surveillance
stalled systems. Swissbit security products can • Point of Sale (POS)
be used as a TPM-like, hardware-based root of • Smart Infrastructure
trust to give IoT devices a unique ID and protect • Mobility

access, boot code, communication, and stored

data.

APPLICATIONS 7
 APPLICATIONS

NETWORKING &
COMMUNICATION

NETCOM PRODUCTS

Swissbit supports the demanding field For system boot purposes, a common
of NetCom applications with products frequently utilized device is the em-
that withstand a wide range of frequent bedded USB module. With the U-4x and
temperature changes and operate be­ U-5x family, Swissbit offers a broad
tween -40°C and +85°C. It is mandatory range of capacities and interface modes.
that products perform for an extended Data care management with retention
life time in the field without the need optimization maintains the boot image
for replacement or service. Swissbit's data over the complete service life and
durabit™ range of SSDs fulfill this requi- guarantees a safe and fast restart of the
rement. NetCom system.

8
The latest technologies and life changing
developments rely on the Internet. The TYPICAL APPLICATIONS:
Internet of Things (IoT) cannot be realized • ATCA Blade
without a strong network of communication • Cable modem
channels. • Content and video delivery
• Digital Subscriber Line
Transmitting data to remote areas of the access multiplexer
world is challenging and involves a high cost. • Enterprise Media Gateway
Transceivers, routers and bridges that require • Switches and routers
uninterrupted, autonomous 24/7 operation • Optical network
• Radar / Sonar
are often under extreme environmental • Radio network controller
conditions and may be installed in areas that • Security infrastructure
are difficult to service. • Tetra Base Station
• Wireless Base Station

APPLICATIONS 9
 APPLICATIONS

AUTOMOTIVE

AUTOMOTIVE PRODUCTS

All components used in automotive embedded memory and storage manu-

applications need to operate within a facturer with an IATF 16949 certified fab.
wide temperature range and withstand Our new 3D NAND based S-50 SD memory
sudden power loss as well as shock and card lineup caters to the demands of
vibration. Additionally, very low failure automotive applications, offering the
rates are essential, because replacement highest reliability and quality at com-
of malfunctioning parts can incur high petitive prices.
costs. Swissbit is the only independent

10
The increasing varieties of infotainment and
dashboard applications in cars today require TYPICAL APPLICATIONS:

significantly higher storage capacities than • Entertainment systems

before. For autonomous driving, the demand • Navigation systems
for fast and high capacity storage drives the • Head unit / dashboard
• Black box / crash recorder
development of embedded products. Swissbit • Instrument cluster
participates in this trend with newly developed, • Dash cam
dedicated storage solutions.

APPLICATIONS 11
 APPLICATIONS

SECURITY

SECURITY PRODUCTS

Governments, enterprises, banks, and to update systems to a constant state-

industry demand high-end security to of-the-art level of security. Swissbit's
protect their assets. The growing number secure memory solutions offer smart
of IoT devices need to be secured against card functionality coupled with NAND
interception of data transfer and ha- flash storage. Systems with SD card,
cking of control systems. microSD card, or USB interface can easily
But even trusted security solutions like be updated to the protection level of
Management Engines, Smartcard chips, a smart card chip. For efficient data pro-
or secured CPUs prove to be imperfect. tection of stored information, Swissbit
An upgradeable security solution based offers SSDs as self-encrypted drives (SED)
on exchangeable hardware cryptography with TCG OPAL compliance or SD Cards
and standard interfaces is the solution with AES encryption.

12
Hardware-based security offers the
highest level of protection and security. TYPICAL APPLICATIONS:

Swissbit's middleware creates a standardized • Surveillance

layer to offer security functionality to the • Audit trails
• License protection
system without the need to understand the
• Secure update
underlying hardware interfaces. The Swissbit • Secure voice communication
Security Interface supports all relevant mobile, • Authentication and authorization
portable, embedded, and PC platforms. • Data encryption and protection
• Point of Sale (POS)

APPLICATIONS 13
 PRODUCT FEATURES
ROBUSTNESS FEATURES DATA FEATURES

SHOCK AND VIBRATION DATA CARE MANAGEMENT

The design, assembly, and use of Multiple routines inside the controller
selected materials guarantee firmware improve data quality and
extreme mechanical robustness. eliminate degradation effects.

CONFORMAL COATING LIFE TIME MONITORING (LTM)

A thin polyurethane film protects against The Swissbit Life Time Monitoring feature
aggressive environmental conditions enables users to access the memory
such as dust, moisture, or corrosive gas. device's detailed Life Time Status and
allows remaining life time prediction,
LONGEVITY thereby avoiding unexpected data loss.
These products offer the lowest TCO
in demanding applications with high SECURE ERASE (SANITIZE / PURGE) /
requalification cost. FAST ERASE
This feature uses an uninterruptible
sequence of data erase commands.

READ-ONLY OPTIMIZED
For cases where content is written to
the NAND flash once, the firmware can
be optimized to guarantee the highest
PERFORMANCE FEATURES possible data retention and read disturb.

TRIM SUPPORT
HIGH PERFORMANCE Expired data can be released and deleted
Optimized for high sequential data rates in the Flash which reduces garbage collection
and IOPS by use of SLC technology. and increases the life time.

WAF REDUCTION ZONE PROTECTION

The WAF (write amplification factor) The device allows the configuration of
for MLC-based products is reduced by multiple zones with either no protection,
combining a page-based firmware write protection, or access protected
block management with a powerful card settings.
architecture and configuration settings.

TEMPERATURE FEATURES

WIDE TEMPERATURE SUPPORT

The products are designed and approved
for reliable operation over a wide tempe-
rature range.

TEMPERATURE SENSOR
The sensor allows the host hardware or
software to monitor the storage device
temperature.

14
ELECTRONIC FEATURES SECURITY FEATURES

ESD AND EMI SAFE TRUE HARDWARE RNG

The product designs are in line with True random numbers are generated
the latest regulations for electrostatic inside the secure element to prevent
discharge and electromagnetic brute force attacks.
interference.
DIGITAL SIGNATURE
LOW POWER CONSUMPTION Digital signatures are very popular and
Electronic devices with lower power indispensable to protect against data or
consumption decrease energy cost, code manipulation.
prolong battery life, and reduce heat
generation in the device, and hence HARDWARE BASED DATA ENCRYPTION
require less cooling. Hardware based security is key
when it comes to replaceability,
WEAR LEVELING simple workflows, and trusted
Sophisticated wear leveling and bad runtime environments.
block management ensure that flash
cells are sparingly and equally used to MOBILE BANKING & EPURSE
prolong the device's life. Strong authentication and offline
security for mobile banking and
IN FIELD FW UPDATE payment.
The storage product can be upgraded with
new firmware in the field. The upgrade DEVICE PROTECTION BY DUAL FACTOR
process is protected against power loss. AUTHENTICATION
The user needs to have the card and
POWER FAIL PROTECTION & RECOVERY know the PIN.
During an unintentional shutdown,
firmware routines and intelligent hard- SECURE VOICE
ware architecture ensure that no corrup- The product is optimal for fast,
tion of user or system data will occur. encrypted, and user-friendly
secure voice solutions.

ELLIPTIC CURVE CRYPTOGRAPHY SUPPORT

Elliptic curves are faster and more
efficient than RSA cryptography.

DATA PROTECTION & ENCRYPTION

The card offers a data safe function with
strong AES encryption and PIN access
protection.

SECURE LOGGING
Any data can be stored securely in
write-once mode, queue mode, or
random-access mode.

SECURE CD-ROM
Important data can be modified
only after PIN authentication.

PRODUCT FEATURES 15
PRESALES SALES AFTERSALES
YOUR FUTURE WITH OUR SOLUTION YOUR TRUSTWORTHY PARTNER LOCAL SUPPORT – GLOBALLY

Our experienced Business Development We understand the importance of provi- Our engagement stretches far beyond the
and Field Application Engineering teams in ding local support in your language and delivery of our products. Through sophis-
Europe, North America, and Asia support time zone. For that reason, Swissbit has ticated life cycle management, we can
you in the selection and qualification of established sales offices in all major regions ensure maximum longevity and smooth
the most suitable memory and storage plus a strong network of partners that transitions in the event of product changes.
solution for your applications. reaches even farther. Our experienced And while we are proud of our best-in-
This includes TCO analysis with the Swissbit sales teams manage forecasting and class quality, we are still prepared to
Life Time Monitor, hardware or firmware order fulfillment, or can engage third- provide fast and solution-oriented RMA
customization, middleware development, party logistics or distribution networks if support at any time, including 4D and 8D
the provision of evaluation units and required. reports whenever required.
ultimately a joint qualification.

16
SWISSBIT'S
UNIQUE
360°
CUSTOMER
SERVICE

PRE
SALES

CUSTOMER

AFTER SALES
SALES

CUSTOMER SERVICE 17
 WHAT IS THE
CUSTOMER
BENEFIT?

HIGHEST ROBUSTNESS
WHAT MATTERS WHEN
STORAGE NEEDS TO BE TOUGH
We assure that Swissbit storage products deliver the best
endurance at the maximum performance and for the lowest
cost of ownership in our customers‘ applications. We combine
reliable design and zero-defect manufacturing with world-
class product qualification for the highest quality and long
service life: key factors that ensure the highest productivity
and efficiency in the tough applications that Swissbit serves.

18
 Availability of a full portfolio of
01 storage and security products with
best fit to the customer use case

Fast and easy qualification

02 of a mature product without
risk of undetected issues

Long service life

03 without need of frequent
requalification

Reduced cost
04 of maintenance
and RMA handling
Fast and effective
05 application engineering
support

SAFE PROCESSES SAVINGS THROUGH MAXIMUM STABILITY

THROUGH RELIABLE LONG SERVICE LIFE
DEVELOPMENT
· Product design and development with · Swissbit products use components · Improved signal integrity
focus on industrial, NetCom, and with long-term availability · In-house COB process for maximum
automotive market requirements · The service life of Swissbit products mechanical robustness
· Optimized for demanding applications exceed industry practice by far · PCB design and soldering process
· Stringent hardware and firmware · Swissbit commits to locked BOM and withstand high thermal stress
qualification verify design effort PCN process · True industrial temperature support
· Firmware for highest endurance

CUSTOMER BENEFIT 19
 NAND FLASH
PRODUCTS

SWISSBIT'S EMBEDDED STORAGE SOLUTIONS

Our sophisticated flash handling algorithms optimize

the performance and life of the 2D and 3D NAND flash
used in our products.

OEMs of various industries require a ded memory and storage solutions

variety of memory and storage solutions. portfolio covers all relevant interfaces
In contrast to typical consumer devices, and form factors including SD and microSD
Swissbit's embedded memory and memory cards, CompactFlash™ and
storage solutions are designed for the CFast™ cards, 2.5" SATA SSDs, SLIM SATA
highest reliability under extreme environ- and mSATA SSDs, M.2 in SATA and PCIe
mental conditions. They come with a NVMe, USB Flash Drives (UFD), and modules.
large feature set tailored to the demands Our sophisticated flash handling algorithms
of the industrial, automotive, and NetCom optimize the performance and life of the
markets and with our commitment to SLC, MLC and 3D NAND flash used in our
long-term availability. Swissbit's embed- products.

everbitTM durabitTM
SLC pSLC MLC 3D pSLC 3D TLC 3D QLC
Chip Capacity • •• ••• •• •••• •••••
Cost per Bit ••••• •••• ••• ••• •• •
Reliability & Endurance •••• •••• ••• •••• ••• ••
Industrial Temperature •••• ••• ••• ••• •• •
Write Performance •••• •••• ••• ••• •• •
ECC Requirement • •• •• •••• •••• ••••
Data Retention •••• ••• ••• ••• ••• •
Longevity •••• •• •• •• •• •

••••• maximum; •••• highest; ••• high; •• medium; • low

20
 FLASH LIFE TIME
PREDICTION
The endurance of flash-based pro-
ducts is primarily defined by the
maximum number of program /
erase cycles of the flash compo-
nents. SLC components normally
allow 100,000 PE cycles per block
while MLC is typically specified as
3,000 PE cycles.

This transparency of NAND compo-

nent endurance is no longer provi-
ded for integrated flash cards with
controllers and firmware. For each
write that the host initiates, the
flash controller has to perform in-
ternal management steps and may
need to erase and write multiple
blocks even at the smallest exter-
nal write transfer size. The ratio
between internal write data vo-
lume and the external request size
is called WAF (write amplification
factor) and can vary between one
(theoretical best case) and several
hundred depending on card struc-
ture, flash components used, firm-
ware architecture, and user-appli-
cation write profile.

As explained in the box to the right, the data, such as the number of writes
and erase cycles, the bad block statistic,
SSD ENDURANCE
endurance and performance of a FLASH
product is massively defined by the in- and successful ECC correction, and
ternal write amplification (WAF). provides all the data necessary to
The way in which customer applications extrapolate the life time of the device.
write to the storage device has a high
impact on the WAF, but is difficult to Swissbit durabit™ products use archi-
calculate analytically. Swissbit supports tectural improvements such as page-
a realistic evaluation of the WAF and based FTL, increased overprovisioning,
the endurance of their SSDs and sto- and DRAM supported flash management
rage cards with help of the Swissbit Life to significantly decrease the WAF for
Time Monitoring Tool and statistical data small writes. This enables unpreceden-
stored in the flash by the firmware. ted endurance and write performance
This tool can read out the real usage in these critical use cases.

NAND FLASH PRODUCTS 21

 PCIe SSD Modules
Although SATA is still a dominant inter- especially with the common 4-lane
face in embedded and NetCom systems, configuration. The Swissbit N-10m2 and
the future belongs to PCIe. PCIe breaks N-12m2 PCIe Gen3 / NVMe 1.2 modules
the bandwidth limitations of SATA and only use 2 PCIe lanes and reduce the
offers flexible solutions with multiple power consumption without sacrificing
lanes that can be combined. The second performance. Even if only operated with
innovation to increase the performance one PCIe lane, the performance still
is the new protocol NVMe, which has exceeds the SATA limits. Swissbit addresses
been designed specifically for Non- applications with high endurance require-
Volatile Memory. The protocol signifi- ments with the pSLC versions N-16m2 and
cantly reduces the latency of read and N-18m2. The N-20m2 is a very flexible
write requests. The higher performance solution that can be cut into different
also requires higher power consumption, lengths, from 22110 to 2230.
Wide Temp.

Power Loss

Read-Only

Reduction
ESD & EMI

Improved
Protected

Data Care
Managed
Vibration

Life Time

Leveling
Shock &

Monitor
Support

Support
Sensor
Secure

Temp.
Erase

Wear

TRIM
Safe

WAF

N-10m2 / N-16m2            

N-12m2 / N-18m2            

N-20m2            

 default implemented;

22
 N-10m2 / N-16m2 N-12m2 / N-18m2 N-20m2 / N-26m2

INFORMATION
TYPE M.2 PCIe / NVMe

STANDARD & INTERFACE PCI Express (PCIe) Specification Revision 3.1 / NVMe 1.2 PCIe 3.1 / NVMe 1.3

FORM FACTOR PCI Express® M.2 (2280) B&M key, 2 lanes max 22110 M key, 4 lanes

OUTLINE DIMENSIONS 80 x 22 x 2.23 mm 110,80,60,42,30 x 22 x 3.5 mm

FLASH TYPE 3D NAND TLC / pSLC 3D NAND TLC / pSLC

DENSITY RANGE 120 GB - 960 GB / 40 GB - 320 GB 30 GB - 240 GB / 10 GB - 80 GB 15 GB - 240 GB / 5 GB - 80 GB

10 years @ life begin

DATA RETENTION
1 year @ life end

ENDURANCE [DWPD]* max 2.17 / 25.0 max. 1.42 / 15.2 max. 0.6 / 6.0

TEMPERATURE
Commercial: 0°C to +70°C
OPERATING TEMPERATURE
Industrial: -40°C to +85°C

STORAGE TEMPERATURE -40°C to +85°C

PERFORMANCE
SEQUENTIAL READ (MB/S) up to 1,600 / 1,620 up to 1,570 / 1,520 up to 1,750
SEQUENTIAL WRITE (MB/S) up to 1,000 / 1,070 up to 860 / 860 up to 750
RANDOM 4KB READ (IOPS) up to 190,000 / 195,000 up to 100,000 / 148,000 up to 149,000
RANDOM 4KB WRITE (IOPS) up to 190,000 / 195,000 up to 166,000 / 166,000 up to 106,000

ELECTRICAL DATA
VOLTAGE 3.3V +- 5%

Max. Read Active: 4.1 W Max. Read Active:3.0 W Typ. Read: 2.0 W
POWER CONSUMPTION Max. Write Active: 3.6 W Max. Write Active: 2.4 W Typ. Write: 1.3 W
Power State 3: < 500 mW Power State 3: < 500 mW Power State 3: < 330 mW

FEATURE LIST
FEATURES & TOOLS DRAM support HMB support (Host memory buffer)

Active and Passive Data Care Management

AES 256 / E2E Data protection
Power Fail Data Loss Protection
Active State Power Management (ASPM) Support
NVMe Security Command Support
In-Field Firmware Update
Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.)
TCG OPAL 2.0 (on request for N-10m2 and N-20m2)
Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request)

MORE INFORMATION For more details see www.swissbit.com/product-finder

* DWPD values are according to JESD219 Client Endurance Workload based on a service life of 3 years

NAND FLASH PRODUCTS 23

 2.5" SATA SSDs
Swissbit's 2.5" SSDs are ideal solutions The new X-7x range is based on 3D NAND
for embedded applications requiring TLC with focus on best TCO. The X-76 is
reliable and long service life storage. the flagship with 3D NAND pSLC, offering
The X-60 SATA 6Gb/s series is Swissbit's the best endurance per cost. ALL pro-
MLC-based solution for high perfor- ducts feature Swissbit's proven Power
mance, cost sensitive, high capacity Fail Safety, Data Care Management, a
markets. detailed S.M.A.R.T.-based Life Time
X-600 has best-in-class endurance Monitoring, NCQ, TRIM, advanced wear
using SLC technology, while X-66 is the leveling, bad block management, and
perfect compromise with MLC NAND in in-field firmware update functionality.
pSLC mode.
Wide Temp.

Power Loss

Read-Only
Conformal

Reduction
ESD & EMI

Improved

Longevity
Protected

Data Care
Managed
Vibration

Life Time

Leveling
Shock &

Monitor
Support

Support
Coating

Sensor
Secure

Temp.
Erase

Wear

TRIM
Safe

WAF

X-600              

X-60 / X-66              

X-70              

X-75 / X-73 / X-76              

 Industry Leading;  default implemented;  on request;  not available

24
 X-600 / X-66 / X-60 X-75 X-73 / X-76 X-70

INFORMATION
TYPE 2.5“ SATA Gen3 SSD

INTERFACE SATA Gen3 -6Gbit/s

DATA TRANSFER MODE ATA8

CONNECTOR 15 + 7 pin Serial ATA

OUTLINE DIMENSIONS 100 x 70 x 7 mm

FLASH TYPE SLC / pSLC / MLC 3D NAND TLC 3D NAND TLC / pSLC 3D NAND TLC

SLC: X-600: 8 GB – 256 GB X-73: 30 GB - 960 GB

DENSITY RANGE pSLC: X-66: 16 GB – 480 GB 60 GB - 1920 GB X-76: 10 GB - 320 GB 60 GB - 480 GB
MLC: X-60: 30 GB – 960 GB

DATA RETENTION 10 years @ life begin | 1 year @ life end

ENDURANCE [DWPD]* 30.5 / 13.2 / 2.0 max 0.93 max 0.93 / 9.5 max 1.85

TEMPERATURE
Commercial: 0°C to +70°C
OPERATING TEMPERATURE Commercial: 0°C to +70°C
Industrial: -40°C to +85°C

STORAGE TEMPERATURE -40°C to +85°C

PERFORMANCE
SEQUENTIAL READ (MB/S) up to 520 / 520 / 525 up to 565 up to 565 / 565 up to 560
SEQUENTIAL WRITE (MB/S) up to 425 / 450 / 460 up to 495 up to 495 / 480 up to 465
RANDOM 4KB READ (IOPS) up to 79,000 / 80,000 / 74,300 up to 73,600 up to 73,600 / 77,000 up to 83,500
RANDOM 4KB WRITE (IOPS) up to 76,000 / 75,000 / 77,900 up to 79,400 up to 79,400 / 85,000 up to 66,900

ROBUSTNESS
MTBF ≥2,000,000 hours

SHOCK 1,500 G, 0.5 ms

VIBRATION 50 G, 80-2,000 Hz 20 G, 80-2,000 Hz

HUMIDITY 85 % RH 85 °C, 1,000 hrs

ELECTRICAL DATA
VOLTAGE 5 V ± 10% / 3.3 V ± 5% 5 V ± 10 %

Read (Active): 2.45 W Read (Active): 2.5 W Read (Active): 2.7 W Read (Active): 3.0 W
Write (Active): 3.8 W Write (Active): 3.3 W Write (Active): 3.4 W Write (Active): 3.1 W
POWER CONSUMPTION
Idle: 550 mW Idle: 475 mW Idle: 475 mW Idle: 600 mW
Slumber: 125 mW Partial: 175 mW Partial: 125 mW Slumber: 200 mW

FEATURE LIST
Proven Power Fail Safety E2E Data Protection
Proven Power Fail Safety
NCQ, TRIM AES 256 Encryption optional
NCQ, TRIM
Advanced Wear Leveling & TCG OPAL optional
Advanced Wear Leveling &
Bad Blockmanagement Proven Power Fail Safety
FEATURES & TOOLS Bad Block management
In-field firmware update NCQ, TRIM, Data Refresh
In-field firmware update
SBLTM Tool & SDK for S.M.A.R.T. In-field firmware updateS
SBLTM Tool & SDK for S.M.A.R.T.
based Life Time Monitoring SBLTM Tool & SDK for detailed S.M.A.R.T. based
based Life Time Monitoring
AES 256 Encryption optional Life Time Monitoring

MORE INFORMATION For more details see www.swissbit.com/product-finder

* DWPD values are according to JESD219 Client Endurance Workload based on a service life of 3 years

NAND FLASH PRODUCTS 25

 SATA Modules
Equally to the 2.5“ drives, the Swissbit The five families, X-75, X-76, X-60,
mSATA (MO-300), SLIM SATA (MO-297), X-66, and X-600, target different use
and the M.2 SSDs target embedded cases including OS booting, data logging,
applications that require solid state surveillance recording, or vaulting. The
storage in small, removable form factors. amount and type of write access defines
The SSD modules are designed for robust- the required endurance in TBW. Swissbit
ness against frequent temperature provides their detailed S.M.A.R.T-based
changes within the -40°C to 85°C range, Life Time Monitor, which helps to analyze
withstand high shock and vibration, and the use case and identify the best fit
offer superior performance and endurance. between the Swissbit SSD product families
and the user application.
Wide Temp.

Power Loss

Read-Only
Conformal

Reduction
ESD & EMI

Improved

Longevity
Protected

Data Care
Managed
Vibration

Life Time

Leveling
Shock &

Monitor
Support

Support
Coating

Sensor
Secure

Temp.
Erase

Wear

TRIM
Safe

WAF

X-600m/s/m2              

X-60 / X-66m/s/m2              

X-200m/s              

X-75 / X-76m/s/m2              

 Industry Leading;  default implemented;  on request;  not available

26
 X-600m X-600s X-600m2 X-200m X-200s

INFORMATION
TYPE MO-300 mSATA MO-297 SLIM SATA M.2 2242 M.2 2260 / 2280 MO-300 mSATA MO-297 SLIM SATA

INTERFACE SATA Gen3 -6Gbit/s SATA Gen2 - 3 Gbit/s

DATA TRANSFER MODE ATA8 up to PIO4, MDMA2, UDMA6

52 pos. Edge 75 pos. Edge

15 + 7 pin Serial ATA 52 pos. PCI Express 15 + 7 pin Serial ATA
CONNECTOR Connector PCI Connector
Connector (PCIe) mini Connector
Express (PCIe) mini B & M key

OUTLINE DIMENSIONS 50.8 x 29.85 mm 54 x 39 mm 22 x 42 mm 22 x 60 / 80 mm 50.8 x 29.85 mm 54 x 39 mm

THICKNESS (MAX) 3.8 mm 4.0 mm 3.58 mm 3.8 mm 4.0 mm

FLASH TYPE SLC

DENSITY RANGE 8 GB - 128 GB 16 GB - 128 GB 8 GB - 64 GB 16 GB - 128 GB 2 GB - 64 GB

DATA RETENTION 10 years @ life begin | 1 year @ life end

ENDURANCE [DWPD]* 30.5 3.5

TEMPERATURE
Commercial: 0°C to +70°C
OPERATING TEMPERATURE
Industrial: -40°C to +85°C

STORAGE TEMPERATURE -40°C to +85°C

PERFORMANCE
SEQUENTIAL READ (MB/S)
up to 520 up to 520 up to 520 up to 120
SEQUENTIAL WRITE (MB/S)
up to 405 up to 245 up to 405 up to 95
RANDOM 4KB READ (IOPS)
up to 76,000 up to 76,000 up to 76,000 up to 3,100
RANDOM 4KB WRITE
up to 73,000 up to 54,000 up to 73,000 up to 25
(IOPS)

ROBUSTNESS
MTBF ≥2,000,000 hours

SHOCK 1,500 G, 0.5 ms

VIBRATION 50 G, 80-2,000 Hz 20 G, 10-2,000 Hz

HUMIDITY 85 % RH 85°C, 1,000 hrs

ELECTRICAL DATA
VOLTAGE 3.3 V ± 5 % 5 V ± 10 % 3.3 V ± 5 % 5 V ± 10 %

Read (Active): 1.7 W Read (Active): 2.0 W Read (Active): 1.7 / 1.5 W
Read (Active): 1.3 W Read (Active): 1.5 W
Write (Active): 2.5 W Write (Active): 2.9 W Write (Active): 2.5 / 1.7 W
POWER CONSUMPTION Write (Active):1.6W Write (Active):1.6W
Idle: 380 mW Idle: 550 mW Idle: 380 / 345 mW
Idle: 660 mW Idle: 700 mW
Slumber: 115 mW Slumber: 275 mW Slumber: 115 mW

FEATURE LIST
Proven Power Fail Safety
Proven Power Fail Safety
NCQ, TRIM
Advanced Wear Leveling & Bad Block
Advanced Wear Leveling & Bad Block management
FEATURES & TOOLS management
In-field firmware update
SBLTM Tool & SDK for S.M.A.R.T. based Life
SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring
Time Monitoring
AES 256 Encryption (optional)

MORE INFORMATION For more details see www.swissbit.com/product-finder

* DWPD values are according to JESD219 Client Endurance Workload based on a service life of 3 years

NAND FLASH PRODUCTS 27

 X-60m2 / X-66m2 X-60s / X-66s X-60m / X-66m

INFORMATION
TYPE M.2 2242 M.2 2260 / 2280 MO-297 SLIM SATA MO-300 mSATA

INTERFACE SATA Gen3 -6Gbit/s

DATA TRANSFER MODE ATA8

52 pos. Edge Connector

CONNECTOR 75 pos. Edge Connector B & M key 15 + 7 pin Serial ATA Connector
PCI Express (PCIe) mini

OUTLINE DIMENSIONS 22 x 42 mm 22 x 60 / 80 mm 54 x 39 mm 50.8 x 29.85 mm

THICKNESS (MAX) 3.58 mm 3.58 mm 4.0 mm 3.8 mm

FLASH TYPE MLC durabitTM | pSLC everbitTM

DENSITY RANGE durabit 30 GB – 240 GB 30 GB – 960 GB 30 GB – 480 GB 8 GB – 480 GB

everbit 16 GB – 120 GB 16 GB – 480 GB 16 GB – 240 GB 16 GB – 240 GB

DATA RETENTION 10 years @ life begin | 1 year @ life end

ENDURANCE [DWPD]* durabitTM: 2.0 | everbitTM: 13.2

TEMPERATURE
Commercial: 0°C to +70°C
OPERATING TEMPERATURE
Industrial: -40°C to +85°C

STORAGE TEMPERATURE -40°C to +85°C

PERFORMANCE
SEQUENTIAL READ (MB/S)
up to 520 / 520 up to 520 / 520
SEQUENTIAL WRITE (MB/S)
up to 340 / 415 up to 450 / 450
RANDOM 4KB READ (IOPS)
up to 72,000 / 80,000 up to 75,000 / 80,000
RANDOM 4KB WRITE
up to 78,000 / 73,000 up to 75,000 / 75,000
(IOPS)

ROBUSTNESS
MTBF ≥2,000,000 hours

SHOCK 1,500 G, 0.5 ms

VIBRATION 50 G, 80-2,000 Hz

HUMIDITY 85 % RH 85°C, 1,000 hrs

ELECTRICAL DATA
VOLTAGE 3.3 V ± 5 % 5 V ± 10 % 3.3 V ± 5 %
Read (Active): 1.3 W Read (Active): 1.6 W Read (Active): 1.7 W Read (Active): 1.5 W
Write (Active): 1.6 W Write (Active): 3.4 W Write (Active): 3.7 W Write (Active): 3.2 W
POWER CONSUMPTION
Idle: 360 mW Idle: 415 mW Idle: 550 mW Idle: 380 mW
Slumber: 115 mW Slumber: 115 mW Slumber: 275 mW Slumber: 115 mW

FEATURE LIST
Proven Power Fail Safety
NCQ, TRIM
Advanced Wear Leveling & Bad Block management
FEATURES & TOOLS
In-field firmware update
SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring
AES 256 Encryption (optional)

MORE INFORMATION For more details see www.swissbit.com/product-finder

* DWPD values are according to JESD219 Client Endurance Workload based on a service life of 3 years

28

FLASH STORAGE SOLUTIONS

 X-75/76m2 X-75/76s X-75/76m

INFORMATION
TYPE M.2 2242 M.2 2280 MO-297 SLIM SATA MO-300 mSATA

INTERFACE SATA Gen3 -6Gbit/s

DATA TRANSFER MODE ATA8

CONNECTOR 75 pos. Edge Connector B & M key 15 + 7 pin Serial ATA 52 pos. PCI Express (PCIe) mini

OUTLINE DIMENSIONS 22 x 42 mm 22 x 80 mm 54 x 39 mm 50.8 x 29.85 mm

THICKNESS (MAX) 3.58 mm 3.58 mm 4.0 mm 3.8 mm

FLASH TYPE X-75*: 3D NAND TLC | X-76*: 3D NAND pSLC

X-75m2: 30 GB - 480 GB X-75m2: 30 GB - 960 GB X-75s: 30 GB - 960 GB X-75m: 30 GB - 960 GB

DENSITY RANGE
X-76m2: 10 GB - 160 GB X-76m2: 10 GB - 320 GB X-76s: 10 GB - 320 GB X-76m: 10 GB - 320 GB

DATA RETENTION 10 years @ life begin | 1 year @ life end

ENDURANCE [DWPD]* X-75*: max 0.98 | X-76*: max 21.7

TEMPERATURE
Commercial: 0°C to +70°C
OPERATING TEMPERATURE
Industrial: -40°C to +85°C

STORAGE TEMPERATURE -40°C to +85°C

PERFORMANCE
SEQUENTIAL READ (MB/S) up to 565 / 565 up to 565 / 565 up to 565 / 565 up to 565 / 565
SEQUENTIAL WRITE (MB/S) up to 490 / 480 up to 495 / 490 up to 495 / 490 up to 495 / 490
RANDOM 4KB READ (IOPS) up to 73,200 / 77,400 up to 73,600 / 77,400 up to 73,600 / 77,400 up to 73,600 / 77,400
RANDOM 4KB WRITE (IOPS) up to 79,400 / 84,900 up to 79,400 / 84,900 up to 79,400 / 84,900 up to 79,400 / 84,900

ROBUSTNESS
MTBF ≥2,000,000 hours

SHOCK 1,500 G, 0.5 ms

VIBRATION 50 G, 80-2,000 Hz

HUMIDITY 85 % RH 85°C, 1,000 hrs

ELECTRICAL DATA
VOLTAGE 3.3 V ± 5 % 5 V ± 10 % 3.3 V ± 5 %
Read (Active): 2.2 W Read (Active): 2.3 W Read (Active): 2.7 W Read (Active): 2.4 W
Write (Active): 2.9 W Write (Active): 3.0 W Write (Active): 3.4 W Write (Active): 3.0 W
POWER CONSUMPTION
Idle: 395 mW Idle: 395 mW Idle: 475 mW Idle: 395 mW
Partial: 115 mW Partial: 115 mW Partial: 125 mW Partial: 100 mW

FEATURE LIST
E2E Data Protection
AES 256 Encryption (optional) / TCG OPAL 2.0 (optional)
Advanced Wear Leveling, Bad Block Management
Proven Power Fail Safety
FEATURES & TOOLS
NCQ, TRIM
Data Refresh
In-field firmware update
SBLTM Tool & SDK for detailed S.M.A.R.T. based Life Time Monitoring

MORE INFORMATION For more details see www.swissbit.com/product-finder

* DWPD values are according to JESD219 Client Endurance Workload based on a service life of 3 years

NAND FLASH PRODUCTS 29

 CFast Cards TM

CFast™ cards combine the CompactFlash™ Swissbit's CFast™ cards provide rugged and
(CF) card form factor and the Serial ATA easy replaceable storage for embedded and
(SATA) interface into a single product. industrial systems. The Swissbit CFast™ card
CFast™ cards can replace both HDDs and portfolio covers the range from high-end
CompactFlash™ cards in applications SLC-based F-600 to the cost/performance
requiring small form factors, high endu- optimized F-50. With an equal feature set
rance, and the ability to withstand shock, as the 2.5“ X-60 SSD, the F-60 MLC product
vibration, extreme temperatures (-40°C and F-66 pSLC card are perfect devices for
to +85°C), and rough environmental high performance and endurance and the
conditions. lowest total cost of ownership.
Wide Temp.

Power Loss

Read-Only
Conformal

Reduction
ESD & EMI

Improved

Longevity
Protected

Data Care
Managed
Vibration

Life Time

Leveling
Shock &

Monitor
Support

Support
Coating

Sensor
Secure

Temp.
Erase

Wear

TRIM
Safe

WAF

F-600              

F-60 / F-66              

F-50 / F-56              

F-240              

 Industry Leading;  default implemented;  on request;  not available

30
 F-600 F-60 / F-66 F-50 / F-56 F-240

INFORMATION
TYPE CFast™ CARD

INTERFACE CFast™ 2.0 - SATA Gen3 CFast™ 1.0 - SATA Gen2

DATA TRANSFER MODE 6Gbit/s ATA8 3Gbit/s ATA7

CONNECTOR CFast™ Type I

OUTLINE DIMENSIONS 36.4 x 42.8 x 3.6 mm

FLASH TYPE SLC MLC durabitTM / pSLC everbitTM MLC / pSLC SLC

MLC: 8 GB - 240 GB MLC: 8 GB - 256 GB

DENSITY RANGE 8 GB - 64 GB 2 GB - 64 GB
pSLC: 4 GB - 120 GB pSLC: 4 GB - 128 GB

DATA RETENTION 10 years @ life begin | 1 year @ life end

ENDURANCE [DWPD]* 33.8 1.98 / 13.2 max 1.50 / 7.98 max 2.63

TEMPERATURE
Commercial: 0°C to +70°C
OPERATING TEMPERATURE
Industrial: -40°C to +85°C

STORAGE TEMPERATURE -40°C to +85°C

PERFORMANCE
SEQUENTIAL READ (MB/S) up to 520 up to 520 / 520 up to 500 / 510 up to 120
SEQUENTIAL WRITE (MB/S) up to 245 up to 180 / 415 up to 330 / 415 up to 120
RANDOM 4KB READ (IOPS) up to 76,000 up to 72,000 / 80,000 up to 53,500 / 32,000 up to 3,200
RANDOM 4KB WRITE (IOPS) up to 54,000 up to 43,000 / 75,000 up to 74,000 / 66,000 up to 75

ROBUSTNESS
MTBF ≥ 2,000,000 hours ≥ 2,500,000 hours

SHOCK 1,500 G, 0.5 ms 500 G, 1 ms 500 G, 1 ms

VIBRATION 50 G, 80-2,000 Hz 20 G, 80-2,000 Hz 20 G

HUMIDITY 85 % RH 85°C, 1,000 hrs

ELECTRICAL DATA
VOLTAGE 3.3 V ± 5 %

POWER CONSUMPTION Read (Active): 1.6 W Read (Active): 1.4 W Read (Active): 1.2 W Max. 3.2 W
Write (Active): 2.4 W Write (Active): 1.8 W Write (Active): 2.1 W
Idle: 347 mW Idle: 380 mW Idle: 248 mW Idle: 380 mW
Slumber: 115 mW Slumber: 116 mW Slumber: 17 mW PHYSLP < 80 mW

FEATURE LIST
Proven Power Fail Safety
Sophisticated Wear Leveling &
Proven Power Fail Safety Bad Block management
NCQ, TRIM Read Disturb Management
Advanced Wear Leveling & Bad Block management TRIM
FEATURES & TOOLS
In-field firmware update Low Power Consumption
SBLTM Tool & SDK for S.M.A.R.T. based Life Time Monitoring Security & SBZoneProtection
F-6x: AES 256 Encryption (optional) features available
SBLTM Tool & SDK for S.M.A.R.T.
based Life Time Monitoring

MORE INFORMATION For more details see www.swissbit.com/product-finder

* DWPD values are according to JESD219 Client Endurance Workload based on a service life of 3 years

NAND FLASH PRODUCTS 31

 CompactFlash TM

To this day, CompactFlash™ (CF) cards are All Swissbit's CF Series are offered in
widely used as boot and data logging both commercial (0°C to +70°C) and
devices in many NetCom and industrial industrial (-40°C to +85°C) temperature
applications. ranges. Swissbit's most recent CF Card
Swissbit's dedication to these markets is product families C-500, C-50 and C-56
shown by the broad portfolio and recent are using page based Flash management
launch of a new product family. and thus provide the highest write IOPS
Swissbit products are developed with rate as well as outstanding endurance.
a strong focus on quality, reliability,
robustness, and longevity.
Wide Temp.

Power Loss

Read-Only
Conformal

Reduction
ESD & EMI

Improved

Longevity
Protected

Data Care
Managed
Vibration

Life Time

Leveling
Shock &

Monitor
Support

Support
Coating
Secure
Erase

Wear

TRIM
Safe

WAF

C-300             

C-300 LONGEVITY             

C-320             

C-440             

C-500 / C-56 / C-50             

 Industry Leading;  default implemented;  on request;  not available

32
 C-300 / C-300L / C-320 C-440 C-500 C-50 / C-56

UDMA6 CF

UDMA6 CF

UDMA6 CF
INFORMATION
TYPE COMPACTFLASHTM CARD

CFA4.1 CFA5.0
INTERFACE
True IDE / PC card - Up to True IDE / PC card - Up to
DATA TRANSFER MODE
UDMA4, MDMA4 & PIO6 UDMA6, MDMA4 & PIO6

CONNECTOR CFC Type I

OUTLINE DIMENSIONS 36.4 x 42.8 x 3.3 mm

FLASH TYPE SLC MLC durabitTM / pSLC everbitTM

C-300: 128 MB-4 GB

C-50: 8 GB - 128 GB
DENSITY RANGE C-300L: 128 MB - 1 GB 2 GB - 64 GB 512 MB - 64 GB
C-56: 4 GB - 64 GB
C-320: 2 GB - 32 GB

DATA RETENTION 10 years @ life begin | 1 year @ life end

C-300: max 1.70 C-50: max 0.14

ENDURANCE [DWPD]* max 2.15 max 3.50
C-320: max 0.92 C-56: max 1.11

TEMPERATURE
Commercial: 0°C to +70°C
OPERATING TEMPERATURE
Industrial: -40°C to +85°C

STORAGE TEMPERATURE -40°C to +85°C

PERFORMANCE
SEQUENTIAL READ (MB/S) up to 45 up to 65 up to 64 up to 114 / 115
SEQUENTIAL WRITE (MB/S) up to 35 up to 35 up to 44 up to 39 / 66
RANDOM 4KB READ (IOPS) up to 3,300 up to 2,400 up to 3,200 up to 3,500 / 5,000
RANDOM 4KB WRITE (IOPS) up to 50 up to 300 (with TRIM) up to 1,900 up to 2,400 / 3,300

ROBUSTNESS
MTBF ≥ 3,000,000 hours

SHOCK 1,500 G

VIBRATION 20 G

HUMIDITY 85 % RH 85°C, 1,000 hrs

ELECTRICAL DATA
VOLTAGE 3.3 V ± 5 % | 5 V ± 10 %

POWER CONSUMPTION PIO typ 60 mA @ 3.3 V PIO typ 60 mA @ 3.3 V max 120 mA max 130 mA
DMA typ 90 mA @ 3.3 V DMA typ 80 mA @ 3.3 V Idle 4.5 mA Idle 4.5 mA
DMA typ 130 mA @ 5 V DMA typ 90 mA @ 5 V

FEATURE LIST
Page based FTL for maximum Endurance
Proven Power Fail Safety
Proven Power Fail Safety
Proven Power Fail Safety Sophisticated Wear Leveling &
Sophisticated Wear Leveling &
Sophisticated Wear Leveling & Bad Block management
Bad Block management
Bad Block management Read Disturb Management
Read Disturb Management
FEATURES & TOOLS Security & SBZoneProtection TRIM
TRIM
features available Security & SBZoneProtection
Security & SBZoneProtection
SBLTM Tool & SDK for S.M.A.R.T. features available
features available
based Life Time Monitoring SBLTM Tool & SDK for S.M.A.R.T.
SBLTM Tool & SDK for S.M.A.R.T.
based Life Time Monitoring
based Life Time Monitoring

MORE INFORMATION For more details see www.swissbit.com/product-finder

* DWPD values are according to JESD219 Enterprise Endurance Workload based on a service life of 3 or 5 years

NAND FLASH PRODUCTS 33

 SD Memory Cards
Secure Digital (SD) memory cards have conditions. The SLC based S-450/455
a widespread use in industrial and offers the best sequential performance and
automotive applications, ranging from highest endurance, while the durabit™
read only applications as in navigation S-45 and the everbit™ S-46 series rely
systems to utilization as boot media, on MLC NAND. They combine an industry
for video recording, or data logging. leading controller with sub-page-based
Swissbit's Industrial Secure Digital (SD) firmware and achieve unprecedented
card series is designed for high sustained random write performance. The new S-30
performance and endurance and is ma- and S-50 models feature 3D NAND, with
nufactured and tested in Swissbit's own S-30 targeting read-mostly applications
fab to withstand extreme environmental and S-50 as a full featured device.
Wide Temp.

Power Loss

Read-Only
Conformal

Reduction
ESD & EMI

Improved

Longevity
Protected

Data Care
Managed
Vibration

Life Time

Leveling
Shock &

Monitor
Support

Coating

Wear
Safe

WAF

S-200           

S-45           

S-46           

S-450           

S-455           

S-30           

S-50           

 Industry Leading;  default implemented;  on request;  not available

34
 S-200 S-450 / 455 S-45 / S-46 S-30 S-50

INFORMATION
SD MEMORY CARD SD MEMORY CARD
TYPE SD MEMORY CARD (SD / SDHC)
(SD / SDHC / SDXC) (SDHC / SDXC)

INTERFACE SD 6.1, Class 10, UHS-I, SD 6.1, Class 10, UHS-I,

SD 2.0, Class 6 SD 3.0, Class 10, UHS-I
DATA TRANSFER MODE V30, A1 A1, Automotive Type

CONNECTOR SD

OUTLINE DIMENSIONS 32 x 24 x 2.1 mm

MLC durabitTM
FLASH TYPE SLC 3D NAND TLC
pSLC everbitTM

512 MB - 2 GB (SD) S-45: 4 GB - 128 GB 32 GB (SDHC) 32 GB (SDHC)

DENSITY RANGE 512 MB - 2 GB (SD)
4 GB - 32 GB (SDHC) S-46: 2 GB - 64 GB 64 GB - 256 GB (SDXC) 64 GB - 128 GB (SDXC)

DATA RETENTION 10 years @ life begin | 1 year @ life end

100k P/E Cycles S-45: 3k P/E Cycles

ENDURANCE 1k P/E Cycles 3k P/E Cycles
(Flash Cell Level) S-46: 20k P/E Cycles

TEMPERATURE
Extended: -25°C to +85°C Extended: -25°C to +85°C
OPERATING TEMPERATURE Extended: -25°C to +85°C
Industrial: -40°C to +85°C Industrial: -40°C to +85°C

STORAGE TEMPERATURE -40°C to +100°C -40°C to +85°C -40°C to +100°C

PERFORMANCE
SEQUENTIAL READ (MB/S) up to 24 up to 88 / 44 up to 43 / 46 up to 95 typ 90
SEQUENTIAL WRITE (MB/S) up to 18 up to 73 / 38 up to 21 / 52 up to 85 typ 40
RANDOM 4KB READ (IOPS) up to 1,640 up to 1,430 / 1,250 up to 1,200 / 1,440 up to 1,700 typ 2,050
RANDOM 4KB WRITE (IOPS) up to 31 up to 28 / 1,100 up to 950 / 1,260 up to 1,050 typ 800

ROBUSTNESS
MTBF ≥ 3,000,000 hours

SHOCK 1,000 G 1,500 G

VIBRATION 15 G 50 G 20 G 50 G

HUMIDITY 85 % RH 85°C, 1,000 hrs

ELECTRICAL DATA
VOLTAGE 2.7 -3.6 V Normal

POWER CONSUMPTION Read typ 40 mA Read typ 75 mA Read typ 80 mA Read typ 80 mA Read typ 110 mA
Write typ 65 mA Write typ 75 mA Write typ 70 mA Write typ 100 mA Write typ 110 mA

FEATURE LIST
Support SD SPI mode
Proven Power Fail Safety
Proven Power Fail Safety
Support SD SPI mode Sophisticated Wear
Sophisticated Wear S-450 block based FTL / S-455, S-45, S-46 page based FTL
Static and Dynamic Leveling & Bad Block
Leveling & Bad Block Proven Power Fail Safety
Wear Leveling management
FEATURES & TOOLS management Sophisticated Wear Leveling & Bad Block management
Bad Block Management Autonomous Data Care
Diagnostic features & Life Autonomous Data Care Management
Auto-Read Refresh Management
Time Monitoring through SBLTM Tool & SDK for detailed Life Time Monitoring
Embedded Mode SBLTM Tool & SDK for
SD / SPI command set
detailed Life Time
Monitoring

MORE INFORMATION For more details see www.swissbit.com/product-finder

NAND FLASH PRODUCTS 35

 microSD Cards
Manufactured in Swissbit's own fab with pSLC configuration S-46u, feature a
chip on board technology and based on long list of hardware and firmware
a dedicated industrial controller and improvements.
reliable NAND flash, the microSD memory Sub-page based firmware, known under
cards withstand extreme environmental the durabit™ and everbit™ brands, enab-
conditions and provide the highest level les unprecedented endurance and random
of mechanical stability and enhanced write performance for S-455u, S-46u and
ESD protection. Furthermore, the hard S-45u. The Swissbit Life Time Monitor
gold SD connectors endure a minimum support allows you to choose the perfect
of 20,000 insertion cycles. product for your use case. The new S-30u
The different series in SLC technology and S-50u models feature 3D NAND, with
(S-300u, S-200u and S-450/455u), as S-30u targeting read-mostly applications
well as the MLC products S-45u and the and S-50u as a full featured device.
Wide Temp.

Power Loss

Read-Only
Conformal

Reduction
ESD & EMI

Improved

Longevity
Protected

Data Care
Managed
Vibration

Life Time

Leveling
Shock &

Monitor
Support

Coating

Wear
Safe

WAF

S–300u           

S–200u           

S–45u           

S–46u           

S–450u           

S–455u           

S–30u           

S–50u           

 Industry Leading;  default implemented;  on request;  not available

36
 S–200u / 300u S–450u / 455u S–45u / 46u S–30u S–50u

INFORMATION
microSD MEMORY CARD microSD MEMORY CARD microSD MEMORY CARD microSD MEMORY CARD microSD MEMORY CARD
TYPE
SD / SDHC SD SDHC / SDXC SDHC / SDXC SDHC / SDXC

INTERFACE SD 6.1, Class 10, UHS-I, SD 6.1, Class 10, UHS-I,

SD 2.0, Class 10 / 6 SD 3.0, Class 10, UHS-I
DATA TRANSFER MODE V30, A1 A1, Automotive Type

CONNECTOR microSD

OUTLINE DIMENSIONS 15 x 11 x 0.7 / 1 mm

S-45u: MLC durabitTM

FLASH TYPE SLC 3D NAND TLC
S-46u: pSLC everbitTM

512 MB - 2 GB (SD) 512 MB - 2 GB (SD) 2 GB - 32 GB (SDHC) 32 GB (SDHC) 32 GB (SDHC)

DENSITY RANGE
4 GB - 8 GB (SDHC) 4 GB - 8 GB (SDHC) 64 GB (SDXC) 64 GB - 256 GB (SDXC) 64 GB - 128 GB (SDXC)

DATA RETENTION 10 years @ life begin | 1 year @ life end

ENDURANCE (FLASH) 100k P/E Cycles 3k / 20k P/E Cycles 1k P/E Cycles 3k P/E Cycles

TEMPERATURE
Extended: -25°C to +85°C Extended: -25°C to +85°C
OPERATING TEMPERATURE Extended: -25°C to +85°C
Industrial: -40°C to +85°C Industrial: -40°C to +85°C

STORAGE TEMPERATURE -40°C to +85°C -40°C to +100°C -40°C to +85°C -40°C to +100°C

PERFORMANCE
SEQUENTIAL READ (MB/S) up to 19 / 24 up to 30 / 40 up to 44 / 42 up to 95 typ 90
SEQUENTIAL WRITE (MB/S) up to 21 / 22 up to 24 / 28 up to 19 / 40 up to 85 typ 40
RANDOM 4KB READ (IOPS) up to 1,200 / 1,150 up to 1,350 / 1,400 up to 1,700 typ 2,050
RANDOM 4KB WRITE (IOPS) up to 28 / 1,500 up to 950 / 1,250 up to 1,050 typ 800

ROBUSTNESS
MTBF ≥ 3,000,000 hours

SHOCK 1,500/ 1,000 G 1,500 G

VIBRATION 50 / 15 G 50 G

HUMIDITY 93 % RH 40°C, 500 hrs 85 % RH 85°C, 1,000 hrs

ELECTRICAL DATA
VOLTAGE 2.7 - 3.6 V

Read typ 30 / 50 Read typ 50 mA Read typ 75 mA Read typ 80 mA Read typ 110 mA
POWER CONSUMPTION
mAWrite typ 40 / 50 mA Write typ 60 mA Write typ 80 mA Write typ 100 mA Write typ 110 mA

FEATURE LIST
Support SD SPI mode
Proven Power Fail
Safety
S-450u block based FTL / Support SD SPI mode
Proven Power Fail Sophisticated Wear
S-455u, S-45u, S-46u page based FTL Static and Dynamic
Safety Leveling & Bad Block
Proven Power Fail Safety Wear Leveling
FEATURES & TOOLS Advanced Wear management
Sophisticated Wear Leveling & Bad Block management Bad Block Management
Leveling & Bad Autonomous Data Care
Autonomous Data Care Management Auto-Read Refresh
Block management Management
SBLTM Tool & SDK for detailed Life Time Monitoring Embedded Mode
SBLTM Tool & SDK for
detailed Life Time
Monitoring

MORE INFORMATION For more details see www.swissbit.com/product-finder

NAND FLASH PRODUCTS 37

 USB Products
The Universal Serial Bus (USB) is still a qualify Swissbit's USB Flash Drive (UFDs)
widely used interface for NetCom system for embedded and NetCom markets.
booting or for update and licensing
purposes. Swissbit offers USB 2 and USB All Swissbit USB solutions combine se-
3 products in different form factors and curity features and Life Time Monitoring
in commercial and industrial operating tools for product life control.
temperature ranges. State-of-the-art
NAND flash handling algorithms, strin- USB products are available in SLC, MLC,
gent component selection, PCN control, and pSLC technology to meet the endu-
and a 100% final system test at the rance and speed requirements of the
full temperature range (−40°C to 85°C) different use cases.
Wide Temp.

Power Loss

Reduction
ESD & EMI

Longevity
Protected

Data Care
Managed
Vibration

Life Time

Leveling
Shock &

Monitor
Support

Support
Wear

TRIM
Safe

WAF

U-50 / U-56 / U-45 / U-46          

U-56n / U-50n          

U-500 / U-400            /
U-500k / U-56k / U-50k          

 default implemented;  on request;  not available

38
 U-500 U-400 U-500k U-56 / U-50n
U-56 / 50 / 58 U-46 / U-45 U-56k / U-50k NANO

INFORMATION
TYPE eUSB FLASH MODULE USB FLASH DRIVE

INTERFACE USB 3.1 USB 2.0 USB 3.1

DATA TRANSFER MODE Super Speed / High / Full High / FullSpeed Super Speed / High / Full

Standard: 2.54 mm -10 Pin (key option)

CONNECTOR USB 3.0 Type A-Plug
Low Profile: 2.00 mm -10 Pin (key option)

Standard: 36.8 mm x 26.65 mm x 9.7mm

OUTLINE DIMENSIONS 68.0 mm x 18.0 mm x 8.2 mm 24.0 mm x 12.1 mm x 4.5 mm
Low Profile: 36.8 mm x 26.65 mm x 6.0mm

FLASH TYPE SLC / pSLC everbitTM / MLC durabitTM

SLC: 4 GB - 32 GB SLC: 1 GB - 32 GB SLC: 2 GB - 32 GB pSLC: 4 - 32 GB

pSLC: 4 GB - 32 GB pSLC: 2 GB - 16 GB pSLC: 8 GB - 64 GB MLC: 8 - 64 GB
DENSITY RANGE
MLC: 8 GB - 64 GB MLC: 4 GB - 32 GB MLC: 16 GB - 128 GB
3D pSLC: 8 GB – 16GB

DATA RETENTION 10 years @ life begin | 1 year @ life end

ENDURANCE [DWPD]* U-500: 4.0 / U-58: 4.1 / U-56: 1.8 / U-50: 0.15 / U-400:0.8 / U-46: 1.51 / U-45: 0.15

TEMPERATURE
Commercial: 0°C to +70°C
OPERATING TEMPERATURE
Industrial: -40°C to +85°C

STORAGE TEMPERATURE -40°C to +85°C

PERFORMANCE
SEQUENTIAL READ (MB/S) up to 175 / 170 / 140 up to 36 / 39 / 23 up to 175 / 170 / 140 up to 190 / 140
SEQUENTIAL WRITE (MB/S) up to 95 / 90 / 60 up to 27 / 29 / 18 up to 95 / 90 / 60 up to 115 / 60
RANDOM 4KB READ (IOPS) up to 3,050 / 3,200 / 2,500 up to 1,600 / 1,800 / 1,400 up to 3,050 / 3,200 / 2,500 up to 3,600 / 2,600
RANDOM 4KB WRITE (IOPS) up to 1,000 / 1,050 / 700 up to 30 / 800 / 550 up to 1,000 / 1,050 / 700 up to 1,250 / 750

ROBUSTNESS
MTBF ≥3,000,000 hours

SHOCK 1,500 G, 0.5 ms

VIBRATION 50 G 20 G

HUMIDITY 85% RH 85°C, 1,000 hrs

ELECTRICAL DATA
VOLTAGE 3.3 V ±5 % / 5 V ±10 % 5 V ± 10 %

POWER CONSUMPTION Full Speed typ 70 mA

High Speed typ 80 mA

FEATURE LIST
Page based FTL for best write performance and endurance (not U-400)
Proven Power Fail Safety
Windows / Linux – Spare block read out
FEATURES & TOOLS Bootable USB Drive
Supports latest OS as Fixed Drive
Connector pitch & key variations available
Shock & vibration resistant

MORE INFORMATION For more details see www.swissbit.com/product-finder

* DWPD values are according to JESD219 Enterprise Endurance Workload based on a service life of 3 or 5 years

NAND FLASH PRODUCTS 39

 Managed NAND
Small form factor embedded systems Swissbit's e.MMC EM-10 and EM-20
have often used NAND components that family covers multiple densities and
were directly interfaced and managed interface speeds. Sophisticated NAND
by the host controller software. This management makes the EM-20 ideal
task has become a challenge due to the for applications like POS/POI, PLC, IoT,
increasing complexity of NAND devices gaming, medical, or as a general boot
and their management. medium for embedded applications.
The EM-10 substitutes NOR / NAND
Managed NAND is the solution: a single combinations with a fast boot option.
small size BGA component incorporates The EN-20 PCIe/NVMe BGA opens the
multiple Flash drives, a NAND controller door for high speed at small density.
and the management firmware and
eases the integration.
Wide Temp.

Power Loss

Low Power
FW Update

Reduction
Protected

Data Care
Managed
Life Time

Leveling
Monitor

In-field
Support

Support

Instant
Secure
Erase

Wear

TRIM

WAF

On

EM-20 / EM-26           

EM-10 / EM-16           

EN-20           

 default implemented;  on request;  not available

40
 EM-20 / EM-26 EM-10 / EM-16 EN-20

INFORMATION
TYPE e.MMC PCIe M.2 1620 BGA

e.MMC 5.0, e.MMC 4.41 PCIe Gen 3.1 / NVMe 1.3

STANDARD & INTERFACE
1-bit, 4-bit, 8-bit up to HS400 1-bit, 4-bit, 8-bit up to SDR52 4 PCIe lanes

PACKAGE 153-ball BGA, 0.5mm pitch BGA, 0.8mm pitch

OUTLINE DIMENSIONS 11.5 x 13 x 1 mm 16 x 20 x 1.8 mm

FLASH TYPE MLC / pSLC reliable mode 3D NAND

DENSITY RANGE 4 GB - 64 GB MLC / 2 GB – 32 GB pSLC 4 GB - 16 GB MLC / 2 GB - 8 GB pSLC 15 GB - 240 GB

DATA RETENTION 10 years @ life begin | 1 year @ life end

ENDURANCE 3k P/E cycles MLC mode / 20k P/E cycles reliable mode 3k P/E cycles 3D NAND

TEMPERATURE
OPERATING TEMPERATURE Industrial: -40°C to +85°C

STORAGE TEMPERATURE -40°C to +85°C

PERFORMANCE
SEQUENTIAL READ (MB/S) up to 250 / 270 up to 49 / 49 up to 1,600
SEQUENTIAL WRITE (MB/S) up to 90 / 160 up to 14 / 31 up to 650
RANDOM 4KB READ (IOPS) up to 5,100 / 5,900 up to 3,100 / 3,760 up to 120,000
RANDOM 4KB WRITE (IOPS) up to 1,800 / 2,100 up to 1,110 / 1,870 up to 150,000

ELECTRICAL DATA
VOLTAGE VCCQ: 1.70-1.95V / 2.70-3.60V ; VCC: 2.70-3.60 3.3V ±5%, 1.8V ±5%, 0.9V ±5%

Typ. Read Current: 180 mA @ 1.8V VCCQ, 38mA @ 3.3V VCC

POWER CONSUMPTION Typ. Write Current: 105 mA @ 1.8V VCCQ, 80mA @ 3.3V VCC Max. Active 5.7 W
Standby: 20 mA

FEATURE LIST
HMB support
Dynamic and Static Wear Leveling
Instant-up for fast boot
High performance up to HS400 mode Page Mode Flash Translation Layer
Data Care Manegement
Sophisticated Wear Leveling & Data Care Management
Page based FTL Management
Read Disturb Management Write Amplification Reduction
Production State Awareness
FEATURES & TOOLS Page based FTL Management Power Fail Data Loss Protection
Proven Power Fail Safety
Production State Awareness In-Field Firmware Update
Safe Shutdown
Proven Power Fail Safety Self-Monitoring, Analysis, and
Security features – secure erase & RPMB
Security features – secure erase & RPMB Reporting Technology (S.M.A.R.T.)
Detailed S.M.A.R.T. data
AES256 Encryption
TCG Opal (on request)

MORE INFORMATION For more details see www.swissbit.com/product-finder

NAND FLASH PRODUCTS 41

 SECURITY
PRODUCTS

HARDWARE SECURITY

Unique hardware security for the protection

of data and devices

Swissbit‘s modular security products are cover many applications including secure
based on standard interfaces and offer boot and safeguarding M2M communi-
system manufacturers a range of hard- cation, as well as legally compliant and
ware-based cyber security solutions for tamper-proof data storage in bodycams
the protection of data and devices. or cash register systems.

Swissbit provides easy-to-integrate and There are many scenarios where the
retrofittable hardware-based security need to store data and protect access
products together with software deve- and communication can be achieved in
lopment kits (SDK) and customization a single step. Swissbit‘s security products
services, enabling manufacturers to offer are extremely robust and durable, which
systems with secured devices, secure makes them ideal for challenging appli-
data storage, and secure data communi- cations with long life time and mainte-
cation. Security products from Swissbit nance cycles.

CUSTOMER BENEFITS:
Easy to integrate, easy to retrofit, and
modular custom products with:

• fast time to market

• reduced development costs
• minimized life time risk

42
 HARDWARE SECURITY PRODUCTS

The security product series in USB, Valuable data such as sensitive files,
microSD, and SD form factors address the emails, photos, OS images, firmware
growing demand for mobile, portable, updates, log files, and audit trails can
and industrial security. The products be protected by encryption, access pro-
offer tangible hardware security in the tection, or made resistant to tampering
same manner as the plug and play by digital signature. Voice and video
approach. For various markets, Swissbit calls, as well as data streams for M2M
adresses a broad set of security use communication, can be protected by
cases. The flash memory can be used by the card in high speed. The best fitting
any host to store data on the cards at product can be chosen depending on
high speed. Additional security functions the use case.
of the card can be activated to protect
any data or device.
Encryption

2nd factor

FIPS 140-2
authenti-
Hardware

Hardware

Banking
Digitally

CD-ROM

Logging
Storage
Mobile

Elliptic
Sign &

Secure

Secure

Secure

Secure
cation

Crypto
based
Verify

MODE
Curve
Voice
True

RNG

SE           

PE           

DP           

 Industry Leading;  default implemented;  on request;  not available

SECURITY PRODUCTS 43
SECURITY EDITIONS

STANDARD EDITION SE PREMIUM EDITION PE

The Standard Edition SE fits best into authentication and PKI The Premium Edition PE combines high-end smartcard security
(Public Key Infrastructure) use cases. The card is supported by with state-of-the-art data protection like CD-ROM, WORM, and
leading middleware vendors in mobile, desktop, and tablet hidden storage. Data can be protected and digitally signed
use cases to ensure a seamless design-in into existing security and fully AES encrypted in one device. Additionally, PE cards
infrastructures. can provide a secure element according FIPS 140-2 certification.

DATA PROTECTION DP AUDIT TRAILS / FISCAL

The Data Protection DP cards and USB drive offer state-of-the-art Swissbit offers an audit trail solution for the tamper-proof
data protection. All data stored in the Flash is AES encrypted recording of fiscal data of Point-of-Sales (POS) systems and
in high speed and can be protected by various options like has developed a plug-in solution that is extremely easy to
CD-ROM, PIN protected data, hidden storage, and WORM data integrate.
area.

44
 PS-45 / 45u PS-46 / 46u PS-450 / 450u PU-50n / 56n

INFORMATION
COMPLIANCE SD 3.0 SD, ASSD V1.1 USB 3.1

DATA TRANSFER UHS-1 Speed class 10 USB 3.1 SuperSpeed

TEMPERATURE -25°C to 85°C -25°C to 85°C

COMPATIBLE TO S-45/45u S-46/46u S-450/450u U-50n

FLASH TYPE MLC pSLC SLC MLC / pSLC

SECURITY SE PE DP
PRODUCT Standard Premium AuditTrail / Data
MATRIX Edition Edition Fiscal Protection
PS-45 SD 8 GB – 16 GB 8 GB – 16 GB 8 GB 8 GB – 64 GB

PS-45u microSD 8 GB – 16 GB 8 GB – 16 GB 8 GB 8 GB – 32 GB

PS-46 SD 4 GB – 8 GB 4 GB – 8 GB 4 GB – 32 GB

DEVICE PS-46u microSD 4 GB – 8 GB 4 GB – 8 GB 4 GB – 16 GB

PS-450 SD 4 GB – 32 GB 4 GB – 32 GB 4 GB – 32 GB

PS-450u microSD 0.5 GB – 2 GB 0.5 GB – 2 GB 0.5 GB – 2 GB

PU-50n 8 GB -16 GB* 8 GB 8 GB - 64 GB

Infineon / NXP smart card chip NXP smart card chip Partitioning:
CC EAL 5+/6+ HW and OS •CD-ROM
BSI TR-03153 •Private
Java card 3.0.1/ 3.0.4 certified TSE •Hidden/WORM
Global Platform 2.2.1 / 2.2.2 SMAERS:EAL2 AES 256 bit flash
CSP: EAL4 encryption
Infineon JTOP/ NXP JCOP 3
RSA up to 2048 bit 384 bit encryption User and administrator
optional ECC up to 512 / 521 bit PIN
SECURITY AES up to 256 bit Validity of signature Configurable retry
SHA2 up to 512 bit certificate: 5 or 7 years + counter
RNG AIS31, FIPS-140 6 months for shelf Unique ID
storage Fast crypto wipe
Compatible Middleware:
•AET SafeSign Guaranteed 20 Mio
•Cryptovision SCinterface signatures
Signature processing
80 / 145 k EEPROM secure storage time < 250 ms
10 years retention

Windows Windows Windows

Linux Linux Linux
DRIVERS / API Android Android RaspBerryPi
SDK available Embedded on request Arduino
PKCS#11 Middleware SDK available SDK available

MORE INFORMATION For more details see www.swissbit.com/product-finder

* higher capacity on request

SECURITY PRODUCTS 45
 ADVANCED PACKAGING,
ASSEMBLY &
TEST SOLUTIONS

SYSTEM IN PACKAGE

System-in-Package (SiP) is the umbrella term for using

advanced packaging and assembly technologies to
integrate and test sensitive bare silicon dies or chips
(active circuits) and supporting components (passives)
into robust finished modules or components. Together
with integrated software or firmware this will create
a fully functional system solution.

With over 25 years of experience, Swissbit Swissbit provides different assembly and
successfully uses advanced packaging packaging technologies (e.g SMT, CoB,
technologies to achieve the smallest FlipChip) in one single unit. The concen-
form factors and to build multi-chip- tration of strong engineering and design
packages. Moreover, Swissbit develops knowhow and experience enables new,
unique test hard- and software solu- innovative electronic packages and
tions for dedicated applications and devices for a wide range of applications.
temperature ranges.
Our customers benefit from a reduced
With this electronic integration and development cost and higher yields and
testing approach, our products provide reliability. We use smart production or-
more functionality inside one package, ganizations, which allows the production
various functional blocks (RF, digital, of small volume series with short lead
sensors, security, and memory) and times and on-time delivery in high
passive components are combined. product variations.
Having all necessary capabilities
in-house we have the best design for Swissbit produces and develops in accor-
reliability, test and manufacturing. dance with ISO 9001, IATF 16949, and
ISO 14001 approved processes and is an
For our highly-integrated SiPs (e.g. experienced partner for global industrial
MicroSD Card) we developed processes and automotive accounts.
for stacking multiple large dies, wire
bonding the smallest bond pads, and
molding the narrowest clearances.

46
 SYSTEM-IN-PACKAGE BENEFITS:
• Reduced process complexity
• Lower TCO (total cost of ownership)
• Reduced system board space
• Layer count reduction of system PCB
• Mixed analog / digital design
• Reduced system board test complexity

DIE ATTACH /
CHIP BONDING
ADHESIVE
DIE STACKING
APPLY

GRINDING & WIRE

DICING BONDING

SUBSTRATE
SMT
PCB

ENCAPSULATION
CONFORMAL FLIP CHIP
COATING

FILM ASSISTED
TRANSFER MARKING
MOLDING

SEPARATION /
UNDERFILL
SINGULATION

SIP PRODUCTS 47
 WHERE YOU FIND US

HEADQUARTERS USA ASIA

SWISSBIT AG SWISSBIT NA INC.

HEADQUARTERS SWITZERLAND OFFICE WESTFORD, MA JAPAN

R&D, FAE support, Sales R&D, FAE support FAE support, Sales
Industriestrasse 4 [email protected] Tokyo
9552 Bronschhofen [email protected]
Switzerland OFFICE NEW YORK
[email protected] Sales GREATER CHINA
[email protected] FAE support
SWISSBIT GERMANY AG Dongguan City
OFFICE SILICON VALLEY, CA [email protected]
SITE BERLIN Sales
R&D, Production [email protected] TAIWAN
Bitterfelder Straße 22 R&D, FAE support, Sales
12681 Berlin OFFICE HOUSTON, TX Taipei City
Germany Sales [email protected]
[email protected] [email protected]

OFFICE MUNICH
R&D, FAE support, Sales
[email protected]
Revision 1 / 2020

WWW.SWISSBIT.COM