Scribd
Upload
504 views4 pages

Packing Standard For BPW Hub

This document provides packaging procedures for parts supplied by Shree Spherotech Pvt. Ltd. Key details include: - Parts will be packed in groups of 4 per layer in a wooden box measuring 990x990x127mm. - Packing materials include a wooden box, corrugated separator, polythene film, rust preventive oil, and straps. - A 12 step process is outlined for applying rust preventive oil, bagging parts, placing separators, and sealing the final package.

Uploaded by

Sachin Kumbhar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
504 views4 pages

Packing Standard For BPW Hub

This document provides packaging procedures for parts supplied by Shree Spherotech Pvt. Ltd. Key details include: - Parts will be packed in groups of 4 per layer in a wooden box measuring 990x990x127mm. - Packing materials include a wooden box, corrugated separator, polythene film, rust preventive oil, and straps. - A 12 step process is outlined for applying rust preventive oil, bagging parts, placing separators, and sealing the final package.

Uploaded by

Sachin Kumbhar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

SHREE SPHEROTECH PVT. LTD.

Doc. Ref SSPL/PACKI


NG/BPW/01
PACKAGING PROCEDURE Rev. No. 0
Rev. Date
Part Number(s)
Part
Part Name Unit Weight (kg) ：
Supplier Name Shree Spherotech Pvt. Ltd. Supplier Code
E-Mail Address [email protected] Contact Person Ameya Patil
Supplier
Street Address Phone 7030949983 / 9766827247
D-31, MIDC Shiroli, Kolhapur - 416122

Exterior Packaging Appearance Packaging Length Width Height


Dimension
Standard Packing Qty
4 nos.

Qty Per Layer 4 Expandable Returnable None


Container style
Layers 1 None
Net Weight
List of packing material
Packaging

Quantity Description Material Dimension


1 Box Wooden 990 X 990 X 127
1 Seprator Corugated with polythene film wraped

Strap Metallic 14 mm x 1mm (8 nos.)


1 Thin Film Polythene 50 microns

Packaging
Description

1. Remove Excess Coolant or Cutting oil with 2. Apply Rust Preventive Oil
Compressed Air.

3. Deep in Rust Preventive Oil - 4. Put Part into wooden Box


am
5. Place Parts into Polythene Bag 6. Place Corugated seprator between parts
Packaging Photo or Stereogram

7. Put Silicon Gel inside the Box 8. Pack Polythene bag Properly at Corners of
Box.

9. Pack The Polythene as per following Snap 10. Seal Polythene bag by Strips

11.Put Corugated Sheet on top of Parts. 12. Pack wooden Box & Tight with Strips.
Label Final Packing

Final Packaging
Supplier Customer (BPW)
Approval Prepared by Approved by Stores Supply Chain Quality
Sachin Kumbhar Ameya Patil

You might also like