Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Machine Screws: DIN 965 & ISO 7045 Torx

    Uploaded by

    Derek

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Machine Screws: DIN 965 & ISO 7045 Torx

    Uploaded by

    Derek
    1K views1 page

    Original Title

    Screw, DIN 7045 and Camcar, Pan, Torx

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views1 page

    Machine Screws: DIN 965 & ISO 7045 Torx

    Uploaded by

    Derek

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    METRIC FASTENERS

    DIN 965 &


    ISO 7045 Torx® MACHINE SCREWS

    DIN 965 90° Flat Phillips (Type H Recess) Machine Screws DIN 965

    A H M
    Nominal Phillips Driver
    Thread Pitch Head Diameter Head Height Recess Diameter
    Diameter Size
    Max Min Max Ref
    M2.0 0.4 3.8 3.5 1.2 2.5 1
    M2.5 0.45 4.7 4.4 1.5 2.70 1
    M3.0 0.5 5.6 5.3 1.65 2.8 1
    M3.5 0.6 6.5 6.14 1.93 4.2 2
    M4.0 0.7 7.5 7.14 2.2 4 2
    M5.0 0.8 9.2 8.84 2.5 4.4 2
    M6.0 1.0 11 10.57 3 6.1 3
    M8 1.25 14.5 14.07 4 8.7 3

    Tolerance on thru 3mm: ±0.20 over 3 thru 6mm: ±0.24 over 6 thru 10mm: ±0.29
    Length over 10 thru 18m: ±0.35 over 18 thru 30mm: ±0.42 over 30 thru 50mm: ±0.50

    R D D

    G
    METRIC - ISO 7045 Six-Lobe Pan Head Machine Screws
    ISO 7045 &
    Camcar
    D H R G
    Head Dimensions Recess Dimensions
    Screw Size Gauge Drive Size
    Head Diameter Head Height Diameter (Fallaway)
    Penetration Max
    Max Min Max Min Ref Min Penetration

    M2 4.0 3.70 1.60 1.46 1.75 0.63 .35 T6


    M2.5 5.0 4.70 2.10 1.96 2.39 0.83 .48 T8
    M3 5.6 5.30 2.40 2.26 2.82 0.88 .56 T10
    M3.5 7.00 6.64 2.60 2.46 3.35 1.14 .67 T15
    M4 8.00 7.64 3.10 2.92 3.94 1.27 .79 T20
    M5 9.50 9.14 3.70 3.52 4.52 1.52 .90 T25
    M6 12.00 11.57 4.60 4.30 5.61 1.90 1.12 T30
    M8 16.00 15.57 6.00 5.70 6.76 2.79 1.18 T40
    This page prints with a watermark.
    451

    You might also like