Scribd
Upload
228 views3 pages

Technical Service Information: Mitsubishi

Uploaded by

Mario Mastronardi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
228 views3 pages

Technical Service Information: Mitsubishi

Uploaded by

Mario Mastronardi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Technical Service Information

MITSUBISHI
F4A40/50 SERIES
NEW PLASTIC BODY SOLENOID
CHANGE: In the 2000 model year, some Mitsubishi F4A40 series transaxles were equipped with a new
design Plastic Body Solenoids.

REASON: The reason for the change was for calibration issues. The flow rate of the plastic body solenoid is
1.8 liters per minute. The Previous design Metal Body solenoids, which are still in use on other
models, flow at 2.5 liters per minute.

PARTS AFFECTED:
The solenoids are the only change and are model dependant. Refer to Figure 1 for the identification
of the new solenoid. The part number is etched in the end of the solenoid casing. See Figure 2 for
the Solenoid locations on the valve body of the F4A series front wheel drive models

INTERCHANGE:

The two different solenoids are not interchangeable because of the flow rate, although they will fit
in all of the valve body bores. Refer to the chart in Figure 3 for model applications of both versions
of the Solenoid.

Special thanks to SOLENOID IDENTIFICATION


Bob Nutall

METAL BODY PLASTIC BODY


MD758981 MR486941

MD758981 MR486941

6604

Copyright © 2008 ATSG

Figure 1 08-10
Page 1 of 3
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information

SOLENOID IDENTIFICATION AND LOCATIONS


F4A-40/50 SERIES

MAIN VALVE BODY


AND SPACER PLATE

H
.375" DIAMETER
CHECKBALLS 3
(2 REQUIRED)

5
73

7 4

SOLENOID
VALVE BODY
SPACER PLATE
G

1. OVERDRIVE CLUTCH SOLENOID 6


2. LOW/REVERSE CLUTCH SOLENOID
3. UNDERDRIVE CLUTCH SOLENOID
4. SECOND CLUTCH SOLENOID
5. TCC CONTROL SOLENOID
6. OUTER VALVE BODY COVER
7. OUTER VALVE BODY ASSEMBLY

Copyright © 2008 ATSG

Figure 2

08-10
Page 2 of 3
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information

METAL BODY SOLENOID VEHICLE APPLICATIONS


MD758981

MD758981

6604

Diamante 1997 to 2004 3.8L F4A51


Eclipse 2000 and UP 2.4L, 3.0L & 3.8L F4A42, F4A51 & F5A5A
Endeavor 2004 and UP 3.8L F4A5A & W4A5A

Galant 1999 and UP 2.4L ,3.0L & 3.8L F4A4B & F4A5A

Mirage 1997 to 1999 1.5L & 1.8L F4A41 & F4A42

Montero 2001 to 2006 3.5L & 3.8L V4A51 & V5A51

Montero Sport 1999 to 2004 3.0L & 3.5L R4A51 & V4A51

PLASTIC BODY SOLENOID VEHICLE APPLICATIONS


MR486941

MR486941

Mirage 2000 to 2002 2.0L F4A4B

Lancer 2002 and UP 2.0L & 2.4L F4A4B

Lancer Sportback 2004 2.4L F4A4B

Outlander 2003 to 2006 2.4L F4A4B & W4A4B


Copyright © 2008 ATSG

Figure 3 08-10
Page 3 of 3
AUTOMATIC TRANSMISSION SERVICE GROUP

You might also like